Related
warnning; does not work with g4 wizards!!!!!
this steps are to cid unlock and also to unlock sim in the folowing devices; qtek 9100, i-mate k-jam, mda vario, orange spv m3000, o2 xda mini s, dopod 838, Cingular 8125
first; you must make a full backup of you wizard before doing this , I personally use [wizBackup.exe] posted below for my backups and restores. This is not mandatory but could save an enormous amount of trouble.
I as most people with a wizard with the aku2 rom found out that it cannot be cid unlock with lokiwiz tool, you will get the following;{error:itwritedisk-an internal error occurred}.
. that is till now.
downgrade rom here http://dl.dropbox.com/u/7696581/htc%20wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
note- this steps is for unlocking the cid of the wizard with aku2 rom.
how to cid. unlock all wizard variants ( that have the latest rom build )
first download custom__ruu_wizard_1050412_wwe_101_11210_wwe. rom from the ftp site from the above link, unpack it and just click the romupdateutility_wizard_noid.exe to start downgrading. Simply follow the prompts.
after the rom are loaded go thru the initial setup as you would with any rom.
now download the (lokiwiz02b) from here;
http://dl.dropbox.com/u/7696581/htc wizard/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Make sure you unzip lokiwiz to the root o the c: drive.
please copy the whole lokiwiz folder to the root of the drive,not the contentents of the folder!!!!!
and follow the instructions .do not forget to copy the cab file(enable rapi) to your device and run it before running lokiwiz.
Now run lockiwiz and unlock your machine, your machine will reboot itself. if yoy see an eroot while unlocking that says;
..............................................................................................................................................................................
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
this means that you device not been unloked......try again............
.................................................................................................................................................................................
That’s it your wizard is unlocked. Make sure yew keep the [lock_backup.bin] in a safe place you may need it for guaranty purposes.
Now flash the latest aku2 rom from your provider.- [very important,to avoid future problems wit rom updates]
then u can flash any rom you want.
question: if i cid unlock and sim unlock my phone (after installing custom 1.5 wwe rom) and then i install latest aku2 i-mate italian rom, will the sim unlock (and cid one too) be preserved?
Answer: i can confirm that that upgrading to the latest aku2 rom the wizard remains cid unlocked.
Special thanks to the author of the above cooked rom [button] also to machinagod for the lokiwiz tool and joninla for finding the downgrade rom, molski for is input and everyone that contributed to the cause.
do not try to downgrade using an older wizard rom other than the one posted above it will not work
also this {how to} is for the htc wizard only it may work with other devices but i don’t know, so if you turn you device into a brick do not blame me. use it at your own risk
if you device is from a operator like: 02, orange etc... You will void your guaranty unlocking cid, but don’t despair, if you keep the [lock_backup.bin] file that the lockiz tool generated you can restore cid to factory default.
this proccess only needs to be done once in the wizards lifetime.
Enjoy;
Jose faria.
donate if you like my work
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
maybe if you find an older rom for you device i only have a wizard.take a look at the lokiwiz tread i belive tha someone mentioned the HTC Prophets.
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
Bet I will!!
For the record, your Jamin's rom is the same that was available to download some weeks ago with the Aku2??
jamichy said:
I've got an imate JAMin with aku2 from factory. Just downloaded older Imate Rom... will try the process when i get home
8) wish me luck
Click to expand...
Click to collapse
let me know how you get on.
onesolo said:
Faria, can you tell me if this process will do it for the HTC Prophets with rom 2.x ???
Click to expand...
Click to collapse
it may be possible,if you have an old custom rom for your device ,found this;
On the one hand, HTC Prophet is a complete copy (both software and hardware are meant) of HTC Wizard. On the other hand, it's equal to HTC Magician in appearance. That is why today review will be quite short, we will only discuss external elements and a new camera, all other aspects were highlighted in the review of HTC Wizard.
http://www.mobile-review.com/pda/review/htc-prophet-en.shtml
Hi Faria, thank you for your HowTo!
Now i know the wizard remains CID unlocked after the upgrade and that's good. I only hope that it stays SIM unlocked too.
Bye
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
sh*t forgot to post the address to the downgrade rom.here it ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
sorry guys
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
faria said:
jamichy said:
Sadly, cant move back to older rom... keep getting error message saying the nk.nbf file is not valid/older than your current file.
I guess we just have to wait for an updated version of Lockiwiz
Click to expand...
Click to collapse
yes u can, use this rom to downgrade
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Click to expand...
Click to collapse
Hello, could you please tell me what is changed in the custom ROM???
I am willing to do the same thing for the prophet.
Thanks
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
andrew_sh said:
faria said:
nothing except i did not post the link to the rom by mistake,did you use an old i-mate rom to downgrade? do not it will not work, use the one in the above link.thats the only one that it will work that a know for sure.
Click to expand...
Click to collapse
You mean to use the wizard rom on the prophet?
Won't that overwrite the bootloader with the one for the wizard???
Click to expand...
Click to collapse
haaa you have the prophet
dont do that it may turn the prophet into a brick the only way is to find an old custom rom for your device. take a look at the ftp site it may have one there.
sorry
I told you Faria that it can be done
Great that it worked out okay, I can imagine how happy you are feeling right now
Nice how-to by the way.
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
siupiu said:
mm..i am currently using T-mobile MDA Vario with the original rom
is that mean i don't have to apply it to unlock the cid?
i just use the lokiwiz 2b to unlock the CID, after it, even i upgrade to the newest rom e.g. the new O2 rom, my CID still remain unlock?
Click to expand...
Click to collapse
THATS IT.
good, really thx~~^_^
i need to get my ipl an spl back to 2.25 any links suggestions
If your IPL/SPL are changed from what they used to be then I'm assuming that your device is CID unlocked? If it is then you could always flash T-Mobiles default rom and that will get your IPL/SPL back to where you want it and then you could change back to any other rom after that as long as it doesn't include an IPL/SPL. Doing this will keep the IPL/SPL that you want but still have a custom rom.
Just a suggestion.
ok well were is the t-mobile rom i have a cingular 8125 will that work still
cujo316 said:
ok well were is the t-mobile rom i have a cingular 8125 will that work still
Click to expand...
Click to collapse
or go to the htc america site. The cingular 2.25 rom is there.
can i have a link to that
cujo316 said:
can i have a link to that
Click to expand...
Click to collapse
You can either search the forum for it or you can Google for it.
what do u mean search the fourm on google
man...some people just don't understand.
http://www.america.htc.com/support/8125/software-downloads.html
took me 2 sec to search on google.
ok well im sry
thomassster said:
man...some people just don't understand.
http://www.america.htc.com/support/8125/software-downloads.html
took me 2 sec to search on google.
Click to expand...
Click to collapse
Just wait until he downloads it and then asks how to use it.
The next time I install a ROM can I use the Cingular ROM or should i still keep flashing the T-Mobile one (MDA_software_update_226102_22610105_022511.exe)? IPL/SPL in sig is still correct..
drawde said:
The next time I install a ROM can I use the Cingular ROM or should i still keep flashing the T-Mobile one (MDA_software_update_226102_22610105_022511.exe)? IPL/SPL in sig is still correct..
Click to expand...
Click to collapse
It doesn't matter.
oo kegobeer that rom does not work
If all you need is to get your phone back to an IPL/SPL of 2.25, then download this file, unzip it and run the ROMUpdateUtility_Wizard_NoID. You can ignore all of the warnings that it will erase all of your files. This won't touch that part of your ROM so all of your files will still be there after you update it.
Are you going to create the same topic everyday? Is it some kind of stupid bet that you've lost or what???
Unlock Htc 8125
I Have 1 Htc 8125 To Unlock But How Can I Unlock ? Plese Tell Me Solution
Let me think...
READ! For God's sake.
gaurangdsi said:
I Have 1 Htc 8125 To Unlock But How Can I Unlock ? Plese Tell Me Solution
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=263116
ya like everyone is saying search google , and also go to the cingular/att .com
common sense
I had seen the Aserg using he USPL to flash his rom and radio.
GUYs:
DO remember,if you are not Hard-spl,your spl ipl is lower than 4.00.0000,Please don't run JUMPSPL or USPL-BETA3 by pof.
Trust me or you will find lots of bricks on street.
Click to expand...
Click to collapse
If you are HTC 4350 OR VADEFONE OR T-WING.run official ruu update to WM6 frist,to make you IPL SPL upon 4.00.0000
If you think I am joking.keep on..
Click to expand...
Click to collapse
check more here or here
And if ipl/spl: 5.04.0001/5.04.0000 from WM5??? That is possible?
ASerg said:
And if ipl/spl: 5.04.0001/5.04.0000 from WM5??? That is possible?
Click to expand...
Click to collapse
that's ok. nothing at all.
safely.
Now I shall check up
I confirm. Thanks!
ASerg said:
I confirm. Thanks!
Click to expand...
Click to collapse
please warn people in your post.
and why don't you use jspl.it's quick and safely.uspl too slow but simply use
i want to be able to flash my rom so that i could install the HTC RUU on my tmo wing ( it's actually a herald but i was stupid enough to put in the TMO RUU)
Do you know any way i could do that with instructions available?
Also, once i do it, would the phone become unlocked again or still locked Just wondering.
umchriswho said:
i want to be able to flash my rom so that i could install the HTC RUU on my tmo wing ( it's actually a herald but i was stupid enough to put in the TMO RUU)
Do you know any way i could do that with instructions available?
Also, once i do it, would the phone become unlocked again or still locked Just wondering.
Click to expand...
Click to collapse
The HARD-SPL is a little more dangerous than the USPL... I can help you find ways to get any ROM you want on that phone easily enough, but UNLOCKING it again is the hard part. There's not 100% sure fire SAFE way of doing it.
welll, i just installed the hard-spl on my device and it went through
there's just one thing that gets me...
what's the difference with this hard-spl and HTC?
is the only difference is that the boot screen is different or are there more features?
For now, I just need a comparision of what the hard-spl has from the HTC one.
The Hard-SPL is a customer SPL. It's permanent, too. You will have to create your own customized RUU from now on, one that lacks the SPL. You can't flash RUU's that contain SPL because the SPL is now write protected. It's convinient, though, because now you can't accidently screw it up. (It's safe once you have it IN your device. Too many people brick their phones trying to get it in there in the first place, though.)
So now i won't be able to put in the HTC RUU anymore?
All right, sorry i'm being so stupid, but here's another question...
You said that i now have to make my own customized RUUs?
What do you mean by that?
If you don't mind, you could send me a pm, I don't want to spam this thread with my stupidity.
Now you can flash ANY rom you want.
ALL cooked ROms - really all - without the chance of bricking = your device is SAFE.
IF you respect this little thing
every RUU Rom Update Utility
contains:
1. Enterbootloader.exe
2. Rapitool.exe
3. RomupgradeUtility.exe (the one you start)
4. RUUGetinfo.exe
5. RUU ressource.dll
6. RUU_signed.nbh (that is the custom system OS - you can put every HERALD .nbh here postet in touchIT3 for example)
7. SPL.nbh ---- !!!!!!!! delete this allways!!!!!!!!! ------ (it is in all official RUU but delete it)
now you can flash with an official update tool all custom roms for you herald.
But don´t use wing roms - the keyboadmapping is different.
There are good herald roms, too.
Good luck
umchriswho said:
So now i won't be able to put in the HTC RUU anymore?
All right, sorry i'm being so stupid, but here's another question...
You said that i now have to make my own customized RUUs?
What do you mean by that?
If you don't mind, you could send me a pm, I don't want to spam this thread with my stupidity.
Click to expand...
Click to collapse
Dear Maestro Help upgrade to WM6
Dear Canonyang,
Have the following
Dopod C800 WM5 5.1.422 (Build 15633.3.2.0)
Can you please help me upgrade to WM 6
Gratefully
neelanjoo
canonyang_China said:
please warn people in your post.
and why don't you use jspl.it's quick and safely.uspl too slow but simply use
Click to expand...
Click to collapse
For my herald, I wanted to upgrade it to TOUCH IT but it didn't work.
At first my herald was unlocked and on the reboot screen it said "HTC."
Now after installing the Official RUU from the instructions, it now shows up tmobile and it's not unlocked anymore..=[
Does anyone have the HTC unlocked rom for my herald like it was before?
I really need it back.
Thanks for your help!
umchriswho said:
For my herald, I wanted to upgrade it to TOUCH IT but it didn't work.
At first my herald was unlocked and on the reboot screen it said "HTC."
Now after installing the Official RUU from the instructions, it now shows up tmobile and it's not unlocked anymore..=[
Does anyone have the HTC unlocked rom for my herald like it was before?
I really need it back.
Thanks for your help!
Click to expand...
Click to collapse
You flashed the Tmobile wing's Official RUU not the HTC official RUU. Unfortunately, there's no way to unlock it unless you USPL and run the REAL HTC RUU. I'm not 100% if that would work, though.
yeah that's what i want to do
I want the HTC REAL RUU back...do you know where i could get it?
http://rapidshare.com/users/5EWZ4
take one of your language
- put xda in bootloader
- flash
umchriswho said:
yeah that's what i want to do
I want the HTC REAL RUU back...do you know where i could get it?
Click to expand...
Click to collapse
WOW thanks!!!
I'm going to try it out now!!!
But if he overwrote the SPL with the Tmobile SPL, it will be locked and he won't be able to flash it very easily.
so after installing this, will it also be unlocked too or no?
just wondering
umchriswho said:
so after installing this, will it also be unlocked too or no?
just wondering
Click to expand...
Click to collapse
Only if you can figure out a way to flash it... and you can't flash it if it's locked. You can try the USPL way, but it's dangerous. I would research first.
yeah...it didn't go through....
it told me there was a invalid error...
any way i can get pass that?
what's USPL and how would it be dangerous?
could you also send me the link to it please?
umchriswho said:
yeah...it didn't go through....
it told me there was a invalid error...
any way i can get pass that?
Click to expand...
Click to collapse
...
I said it wouldn't let you flash it... because your phone is now CID Locked.
Did you try using USPL? Or just running the RUU?
there is a way of hard-spl.
if it is starting up.....
but i don´t know if it works for you after t-mob is on your device.
give it a try maybe.
it worked for me and many other....
umchriswho said:
yeah...it didn't go through....
it told me there was a invalid error...
any way i can get pass that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=343446&highlight=USPL
in that link, they talk about the USPL and flashing and said it was okay right?
they also said that JSPL would be better or something like that to flash...
all i need is the links to the program so that i can do it?
Anyone have any links to any of those two: USPL or JSPL?
Thanks
umchriswho said:
http://forum.xda-developers.com/showthread.php?t=343446&highlight=USPL
in that link, they talk about the USPL and flashing and said it was okay right?
they also said that JSPL would be better or something like that to flash...
all i need is the links to the program so that i can do it?
Anyone have any links to any of those two: USPL or JSPL?
Thanks
Click to expand...
Click to collapse
i sent you a pm
Does anyone know if flashing a valid SPL WHILE in USPL mode is safe? If it is, that'd be a great way to unlock these phones... if you can get your hands on a unlocked HTC RUU.
Guys, i've finally decided to flash my stock rom. It's orange one and info says is't SPL-1.14.0000
Now, but whenever i connect phone to computer it says "serial" on the bottom and i'm gettin warning usb device not recognized from computer.
Help pls..
Gixso said:
Guys, i've finally decided to flash my stock rom. It's orange one and info says is't SPL-1.14.0000
Now, but whenever i connect phone to computer it says "serial" on the bottom and i'm gettin warning usb device not recognized from computer.
Help pls..
Click to expand...
Click to collapse
Hi, do you have installed the correct drivers??
http://forum.xda-developers.com/showthread.php?t=524619
cheer dude, but i think i've sorted it. USB cable was connected through the hub, so pluged it in directly, voila! it worked lol..
Sorry for double post, bit noobish question.
so it shows my SP is 1.14.0000
what am is suppose to do next? use USPL or HSPL?
And what rom? first 1.56?
it's just way too confusing, well at least for me
Gixso said:
Sorry for double post, bit noobish question.
so it shows my SP is 1.14.0000
what am is suppose to do next? use USPL or HSPL?
And what rom? first 1.56?
it's just way too confusing, well at least for me
Click to expand...
Click to collapse
You can use USPL or HSPL. USPL will change your stock SPL only for a moment, so you can't be worry about warranty.
HSPL will change SPL and replace it. You can also restore stock SPL and delete HSPL from device before you give back device to the service.
but can i use any desired rom straight away? if so, why do i need to know what my spl is?
Gixso said:
but can i use any desired rom straight away? if so, why do i need to know what my spl is?
Click to expand...
Click to collapse
if you have stock ROM now and you want to change it to e. g. Miri 6.5 v25 ROM which is 1.56 based, you must first install official 1.56 ROM which replace youcy stock SPL to 1.56. Second you can flash it with USPL or HSPL to get e. g. Miri ROM.
rafalplus03 said:
if you have stock ROM now and you want to change it to e. g. Miri 6.5 v25 ROM which is 1.56 based, you must first install official 1.56 ROM which replace youcy stock SPL to 1.56. Second you can flash it with USPL or HSPL to get e. g. Miri ROM.
Click to expand...
Click to collapse
Ah i understand, first of all i need new official rom, which is 1.56 and then i can use basically any desired rom. Does flashing 1.56 rom means i'm gonna loose warranty on my phone?
Gixso said:
Ah i understand, first of all i need new official rom, which is 1.56 and then i can use basically any desired rom. Does flashing 1.56 rom means i'm gonna loose warranty on my phone?
Click to expand...
Click to collapse
you can get 1.56 ROM on official HTC Website- you You'll not lose the guarantee
but
Every unofficial ROM from XDA it's the loss of the guarantee, but you can restore stock ROM and go to service...
rafalplus03 said:
you can get 1.56 ROM on official HTC Website- you You'll not lose the guarantee
but
Every unofficial ROM from XDA it's the loss of the guarantee, but you can restore stock ROM and go to service...
Click to expand...
Click to collapse
wonder if could help me more, just tried to install official update to 1.56 but it says it's not compatible with my device.
Gixso said:
wonder if could help me more, just tried to install official update to 1.56 but it says it's not compatible with my device.
Click to expand...
Click to collapse
so you have to get deviceID from guy who can download it. Then you can install it using USPL/HSPL
Gixso said:
wonder if could help me more, just tried to install official update to 1.56 but it says it's not compatible with my device.
Click to expand...
Click to collapse
dnload and install hspl 1.56 olinex from the tutorial thread..
no need to update to official rom... jus a waste of tim..
if u dont want hspl then dnload 1.54 stock from the same thread and flash it.
use uspl nex tim onwards to flash new roms.
updatin to officials is a waste of time..
that's exactly what i'm doing right now. Downloading 1.54 update and then will install it and put on dutty'r extreme i think it's called. Is that correct procedure?
Talking about 1.56, what i ment is that i've downloaded updated and it wouldn't install. So guess will have to do it through the bootloader. Am i correct?
Last think i want is to damage my "gem" lol..;-)
Gixso said:
that's exactly what i'm doing right now. Downloading 1.54 update and then will install it and put on dutty'r extreme i think it's called. Is that correct procedure?
Talking about 1.56, what i ment is that i've downloaded updated and it wouldn't install. So guess will have to do it through the bootloader. Am i correct?
Last think i want is to damage my "gem" lol..;-)
Click to expand...
Click to collapse
well to dnload the update u need a serial number..
nd u always can flash from bootloader as it is the safest way.
the best advise i can give u is install hspl 1.56 olinex..
this is because in future if nethin goes wrong wid ur usb port u still can flash stock rom and spl.
if u use uspl it will not be possible...
and in any case fr warranty purposes also ull change spl from 1.54 to 1.14.
so why not 1.56.olinex to 1.14.
involves the same steps rite!!
cvchetan said:
well to dnload the update u need a serial number..
nd u always can flash from bootloader as it is the safest way.
the best advise i can give u is install hspl 1.56 olinex..
this is because in future if nethin goes wrong wid ur usb port u still can flash stock rom and spl.
if u use uspl it will not be possible...
and in any case fr warranty purposes also ull change spl from 1.54 to 1.14.
so why not 1.56.olinex to 1.14.
involves the same steps rite!!
Click to expand...
Click to collapse
May i ask you for a link? i can't find the 1.56 hspl olinex
Gixso said:
May i ask you for a link? i can't find the 1.56 hspl olinex
Click to expand...
Click to collapse
Try a little searching next time and abide by forum rules. HSPL 1.56 can be found here
Fallen Spartan said:
Try a little searching next time and abide by forum rules. HSPL 1.56 can be found here
Click to expand...
Click to collapse
cheers for you help, will do next time harder. Noob here and all is so confusing. Hope i ain't bothering anyone..
Gixso said:
cheers for you help, will do next time harder. Noob here and all is so confusing. Hope i ain't bothering anyone..
Click to expand...
Click to collapse
and hey dont be afraid to ask any questions..
it's better to ask the stupidest question rather than killin ur fone..
cvchetan said:
and hey dont be afraid to ask any questions..
it's better to ask the stupidest question rather than killin ur fone..
Click to expand...
Click to collapse
yeah i know been reading whole day, guess i will have a go now, just bit scared to brick it
got usb updated, got WMDC updated, got framework , ..
Gixso said:
yeah i know been reading whole day, guess i will have a go now, just bit scared to brick it
got usb updated, got WMDC updated, got framework , ..
Click to expand...
Click to collapse
You won't brick your phone. Thats why we are here, to prevent that happening. If your unsure of something, ask away. We can help you. All I ask is that you read and search first before posting.