I have an HTC Hero with VillainRom and tried putting the Nexus One boot screen onto it with one of the threads I found here, but it turns out the file was for Cupcake. Are there any Nexus One boot screens for 2.1?
Related
Alright well first off I've looked all over XDA for an answer if theres is one out there a Mod can remove this post. I'm not new to this at all I have been flashing roms since the Dream was released, just the other day i was thinking about trying out a new from King's new Legend coming from CM 4.2.15.1 as usual i wiped everything reformatted my SD partitions and installed the Legend rom, now for some reason i cannot get past the G1 screen on that or any other rom there is out EXCEPT CM 4.2.15 I attempted the same thing on my 32B MT and get the same problem it will not go past the MT green screen has anyone had this issue or would anyone be able to tell me whats going on I've tried everything i could think of and nothing works. Thanks for any help people!
theres a lot of other roms that require a different SPL than CM does. make sure you have the correct one installed. also, make sure to wipe before flashing.
I have kept that in mind and yes I have wiped before every flash I once again just now tried the CanNNoN202 rom correct SPL and all also running the latest radio still no go on either the MT3G or G1
wut does it say in bootloader screen ?
Any help on this would be greatly appreciated! I have flashed just about every single ROM on XDA and have never run into any issues, besides obvious bug within each of those ROM's. But since all of the .29 overclocked kernel ROM's have been popping up I have had nothing but problems with them. I have tried Darchdroid v2.7 and Buffed 2.0B and on each of those after flashing I either get stuck at the HTC screen or it gets stuck in an HTC screen boot loop. One thing I did notice was that after multiple battery pulls I can sometimes get Darch's ROM to boot, but every time I power off or reboot I get the same thing. I have done all the normal stuff that you guys tell all the n00bs, I have wiped EVERYTHING (Factory Reset, Dalvik, and EXT), I have tried booting up wih no SD card in, repartioned SD (with and without EXT), nothing seems to work. I have flashed back to DamagedControl and Fresh with no problems. Obviously there are people here using these ROM's on their Hero but for some reason mine does not like them, are there difference between Hero's based on when their purchased (different chipsets, ect.)?
Try using regawmod with darch's kernal for honeybun, that combo seems pretty awesome for me.
Just search the development forum for them.
Sent from my HERO200 using XDA App
neuro_genesis said:
Try using regawmod with darch's kernal for honeybun, that combo seems pretty awesome for me.
Click to expand...
Click to collapse
I am not a fan of the look of Regawmod, it looks to photoshoppy for me.
Can someone help me clear up some issues with cm7 on my hero.
Sent from my HTC Hero CDMA using XDA App
For example. Battery bar. Force close on some apps
Sent from my HTC Hero CDMA using XDA App
This is too vague to even know where to begin. What about the battery bar? What apps force close? What recovery are you running? Have you read the GB wiki or search through the thread?
Ok. I am with cell south and when I got cm7 it says sprint. My battery bar is not right. It says I have more battery than I have. Beautiful. Widgets. Force close when trying to get new skins
Sent from my HTC Hero CDMA using XDA App
And 2.5.0.7 on recovery from rom mgr
Sent from my HTC Hero CDMA using XDA App
stuck on boot loop with CM7 - HTC Hero CDMA
I need help getting passed the boot loop (cyanogenMod7 screen with the android guy on a skateboard). I've tried the following:
1st time flashing AOSP CM7 (got it from this page: romrepo.info/wiki/index.php?title=Main_Page) I just flashed it over my CM6 which was working fine.
2nd time I followed instructions that we're supposed to follow if we run into boot loop problem (also from romrepo.info/wiki/index.php?title=Main_Page), which is to flash the kernal mentioned on that page
3rd time I wiped everything, and tried re-flash the AOSP CM7 rom.
everytime I get stuck at the cynogenmod7 screen, and it just keeps looping.
any ideas?? (Yes, I'm new here, but I've successfully flashed many other ROM's and know what I'm doing. Just can't figure out how to get passed this boot loop!)
sixstrum said:
I need help getting passed the boot loop (cyanogenMod7 screen with the android guy on a skateboard). I've tried the following:
1st time flashing AOSP CM7 (got it from this page: romrepo.info/wiki/index.php?title=Main_Page) I just flashed it over my CM6 which was working fine.
2nd time I followed instructions that we're supposed to follow if we run into boot loop problem (also from romrepo.info/wiki/index.php?title=Main_Page), which is to flash the kernal mentioned on that page
3rd time I wiped everything, and tried re-flash the AOSP CM7 rom.
everytime I get stuck at the cynogenmod7 screen, and it just keeps looping.
any ideas?? (Yes, I'm new here, but I've successfully flashed many other ROM's and know what I'm doing. Just can't figure out how to get passed this boot loop!)
Click to expand...
Click to collapse
try clockwork 3.0.0.5, wipe both options in recovery main menu, then format everything but sd in mounts and storage menu, flash rom, then gapps, reboot, if that doesn't work try one of the kernels linked on the wiki, if that doesnt work, go to the live help irc chat linked in the OP for aospCmod.
that worked. My fault, i missed the wipes in the "mount" section. figured it out a few days later. This CM7 is my fav ROM so far!
oh, and thx for the reply il Duce!
First time posting so i need some guidance. @When running cm61.1 stable my phoned paireed with my car bluetooth and I was able to dial by name, "Call Joe Cell", after flashing with CM7 RC4 the phone will still pair but then if I try to make a bluetooth call by name, it will act like it is calling (active call on bluetooth display)and then it stops. Funny thing is if I say call and then speak the nmber instead of the name it will complete the call through the bluetooth in my car. This struck me as strange. any help would be appreciated
I seem to be having the same problem. I wiped both options in the recovery main menu, formatted everything in the mounts and storage menu except for sd card, installed cm7, installed gapps, and rebooted.
Still stuck on the boot screen (android guy on skateboard with spinning arrow). Any ideas what could be causing this?
(HTC Hero CDMA)
Never mind, just got it to work!
Thanks, il Duce, your tip worked great!
I asked this in the DINC2 forum but I'll ask here since the phones are practically the same.
Has anyone tried pushing boot animations yet to data/local? I know at one point this didn't require root but I don't know if that still holds true for newer Sense based phones.
yes works on rooted and custom rommed Inc S. Check out http://forum.xda-developers.com/showthread.php?t=1088498 post 2, quote 2.
Believe that on stock roms bootanimation.zip is /system/customize/
I've done so quite a few times.
http://forum.xda-developers.com/showpost.php?p=14924283&postcount=83
Step 7 is for boot animations and Step 8 is for the splash screen. I've added some sources as well where you can get some bootanimations and even splash screens to start off with (though I created my own custom splash screen )
would be awesome if some created a thread just on boot animations and splashscreen images. I'd like to remove the htc splashscreen at startup and shut down and replace it with something customized.
You can download 47 different bootanimations from UOT Kitchen.
After download just extract the bootanimation.zip and copy it to your rooted phone.
I'm seem to be in a bit lost following the SuperGuide in the Rum Raider post. I have followed all the direction step by step but I cant seem to find a solution to flash the rom. After I flash the kernal using boot flash and when i go to recovery to flash the rom i select recovery and i dont see any options the phone just does to the HTC boot screen. This is the second HTC vivid phone out of the box missing any recovery selection?
Any help is appreciated.
AT&T HTC Vivid.
you HAVE to install the custom recovery...its in the superguide
It appears I used the PH39IMG.zip "the RUU file" from the Rum Raider post and used it with the SuperGuide walkthrough. This was my mistake thinking it was the same file. Thanks for input it worked as it should.
Yea I was installing RumRaider last night and I had an issue because I was using a different version of the PH39IMG.zip file. Found the issue and got my phone up and running RumRaider. I'm loving it, it's really slick! My original Vivid was running stock and I was having screen issues so I got a replacement shipped out to me, so I decided to put the ROM on it and see how it went. Works great and I can't wait to switch over to the new phone. Just need to finish moving some pictures over.