Related
I rooted and flash my nexus one with a rom that was based on the cm7 nightly. It installed completely and I rebooted. It gets past the static x but loops in the moving x. I've tried so many things over the past 8 hours I need help to get a rom working on this. I tried going through the fastboot. Tried using recovery to update from sdcard and I'm having no luck getting this to work again. Hopefully someone on here knows how to fix my problem so I can get a working rom on my phone. Thanks everyone.
Did u install recovery (amon or clockworkmod?? If you did just dload another rom, wipe and flash again
N1
When I originally did the install I installed clockwork and did a back up. When I go into recovery all I can do is either wipe data, update from sdcard and wipe cache. I'm about ready to pull my hair out. I have no clue what went wrong. I've installed new roms on my old phones and no problems, I follow all the instructions.
nandroid, wipe all, retry flashing.
or restore your nandroid backup.
Looking at "adb logcat" while its booting will pinpoint the error.
I've tried to go through fastboot to use my recovery image but I get failed (remote: signature verify fail). I don't know how to get into nandroid and my computer I can only use the fastboot not adb to use logcat. Is there a way to use the fastboot that doesn't come up with the signature fail. I really don't know what happened. What other ways can I use my recovery image if I can't do it from the physical phone?
Sounds like a bad backup. DId you verify MD5?
If you want to start over..
Download AmonRa Recovery 2.2.1. From thread below...
http://forum.xda-developers.com/showthread.php?t=611829
With phone in fastboot mode and connected to PC via usb:
1. Command Prompt: fastboot devices (make sure device is connected)
2. Make sure recovery image file is in your SDK/tools folder
3. Make sure your working directory is SDK/tools folder
4. Command Prompt: fastboot flash recovery recovery-RA-passion-v2.2.1.img
5. After flash is done, reboot to recovery.
6. Wipe everything.
7. Re-flash your ROM.
You can always go back to Clockworkmod if you want. Just re-flash clockwork recovery.
thanks for the help but I'm still getting the signature verify failed even with the new recovery img.
projektmayhem said:
thanks for the help but I'm still getting the signature verify failed even with the new recovery img.
Click to expand...
Click to collapse
Your getting this error when flashing what?
projektmayhem said:
thanks for the help but I'm still getting the signature verify failed even with the new recovery img.
Click to expand...
Click to collapse
Did you unlock your phone (fastboot oem unlock) or did you just root it?
If you haven't unlocked your phone, perhaps try that then use the previous instructions to flash clockwork or amon recovery image.
link for reference
Dude, thanks sooo much. Unlocking the bootloader did the trick. I almost had to go buy a new phone. If you lived in the San Jose area I would buy you a beer.
Make sure you add to his "Thanks" meter! BTW. That would have been my next suggestion...
projektmayhem said:
Dude, thanks sooo much. Unlocking the bootloader did the trick. I almost had to go buy a new phone. If you lived in the San Jose area I would buy you a beer.
Click to expand...
Click to collapse
Make sure you add to his "Thanks" meter! BTW, that would have been my next suggestion...
Sorry for the Double Post
projektmayhem said:
Dude, thanks sooo much. Unlocking the bootloader did the trick. I almost had to go buy a new phone. If you lived in the San Jose area I would buy you a beer.
Click to expand...
Click to collapse
Glad to help. I think we've all had those "OMFG HOW DO I FIX THIS" moments.
So, I nearly **** myself earlier when I nearly bricked my D3, so I though I'd post how I ressurected it.
So, I flashed a bad /data partition, and the bootloader kicked me out. Fastboot rebooted with a line (Last Flash Failed) and would NOT let me out after waiting, battery pulls, wipes, the works.
So, I flashed the ATRIX root.img, and the message went away. A Battery pull later and I'm back in business!
pplude said:
So, I nearly **** myself earlier when I nearly bricked my D3, so I though I'd post how I ressurected it.
So, I flashed a bad /data partition, and the bootloader kicked me out. Fastboot rebooted with a line (Last Flash Failed) and would NOT let me out after waiting, battery pulls, wipes, the works.
So, I flashed the ATRIX root.img, and the message went away. A Battery pull later and I'm back in business!
Click to expand...
Click to collapse
The harder this phone is to mod, the more it seems worth it Thanks for trying!
@pplude
Can you give any more detail on the root file you flashed to your droid 3?
Is it really from an Atrix? Are there any downsides to running this root partition?
The reason I ask is - the Atrix has been rooted, so perhaps this would be a good way to attack the droid 3.
Here's the Atrix root hack. Care to give it a try if you're still feeling brave?
http://www.motorolaatrixforum.com/m...s-f15/how-to-root-motorola-atrix-4g-t318.html
It's the preinstall partition from the atrix. There's no integrity check there so it flashes A-OK. I suppose the preinstall from any phone would work though.
You're the second one to do that successfully. I think it was discussed at length as a potential source for root, but we couldn't get the permissions we wanted out of it for some reason. I think it came down to nosuid, but I'm not positive. The root thread talks more about it.
thingonaspring said:
@pplude
Can you give any more detail on the root file you flashed to your droid 3?
Is it really from an Atrix? Are there any downsides to running this root partition?
The reason I ask is - the Atrix has been rooted, so perhaps this would be a good way to attack the droid 3.
Here's the Atrix root hack. Care to give it a try if you're still feeling brave?
http://www.motorolaatrixforum.com/m...s-f15/how-to-root-motorola-atrix-4g-t318.html
Click to expand...
Click to collapse
I used that on my Atrix way back (a month ago , to enable sideloading, I believe.
You want me to give it a try on the D3 (i.e., flash the /preinstall partition?)
That's what I used to break out of fastboot. Can't help us because of nosuid and noxec built in at the kernel level.
pplude said:
So, I nearly **** myself earlier when I nearly bricked my D3, so I though I'd post how I ressurected it.
So, I flashed a bad /data partition, and the bootloader kicked me out. Fastboot rebooted with a line (Last Flash Failed) and would NOT let me out after waiting, battery pulls, wipes, the works.
So, I flashed the ATRIX root.img, and the message went away. A Battery pull later and I'm back in business!
Click to expand...
Click to collapse
I see you said you've reflashed a half-bricked D3 with an image from Atrix? You said it was root.img?? Did you mean boot.img? I have an Atrix too, and don't see this partition anywhere. Did you or someone pull it with dd? If you have it, could you send it to me and tell me what command you used to flash in moto-fastboot or fastboot?
I tried flashing from the OTA and I'm **** out of luck at the moment, after borking /system trying to make the OTA update in recovery. It's been one headache after another with this fine device
rynosaur said:
I see you said you've reflashed a half-bricked D3 with an image from Atrix? You said it was root.img?? Did you mean boot.img? I have an Atrix too, and don't see this partition anywhere. Did you or someone pull it with dd? If you have it, could you send it to me and tell me what command you used to flash in moto-fastboot or fastboot?
I tried flashing from the OTA and I'm **** out of luck at the moment, after borking /system trying to make the OTA update in recovery. It's been one headache after another with this fine device
Click to expand...
Click to collapse
What the OP is describing only works with fastboot. It sounds like you're able to get into recovery, a completely different system. Start a new thread if this is the case and I'll try to help you out.
psouza4 said:
What the OP is describing only works with fastboot. It sounds like you're able to get into recovery, a completely different system. Start a new thread if this is the case and I'll try to help you out.
Click to expand...
Click to collapse
I have flashed a partition that failed the verification check and now I can't do anything but boot into BP menu. Really, my problem and his are/were pretty similar, I think.
rynosaur said:
I have flashed a partition that failed the verification check and now I can't do anything but boot into BP menu. Really, my problem and his are/were pretty similar, I think.
Click to expand...
Click to collapse
that's exactly it. Find the hacked /preinstall image for the atrix, mine was named (root.img). Then use adb fastboot to flash it to /preinstall. Then it'll reboot as normal. Boot into recovery, then wipe /data and /cache
pplude said:
that's exactly it. Find the hacked /preinstall image for the atrix, mine was named (root.img). Then use adb fastboot to flash it to /preinstall. Then it'll reboot as normal. Boot into recovery, then wipe /data and /cache
Click to expand...
Click to collapse
Thanks. I haven't located the /preinstall you're talking about yet, but I believe you're talking about the the /preinstall that was used to unlock the bootloader, or are you talking about the initial power cord-recovery hack? Anywho, I've been able to successfully flash /system and /boot, but I'm looping into BP menu. The fight continues . . .
EDIT: There are some partitions that the phone will not let me flash in Fastboot, and I think least one of those is my problem (like BP, for example). I keep getting a permissions error, and I am using moto-fastboot in linux or windows.
rynosaur said:
Thanks. I haven't located the /preinstall you're talking about yet, but I believe you're talking about the the /preinstall that was used to unlock the bootloader, or are you talking about the initial power cord-recovery hack? Anywho, I've been able to successfully flash /system and /boot, but I'm looping into BP menu. The fight continues . . .
EDIT: There are some partitions that the phone will not let me flash in Fastboot, and I think least one of those is my problem (like BP, for example). I keep getting a permissions error, and I am using moto-fastboot in linux or windows.
Click to expand...
Click to collapse
My success was using the Android SDK fastboot binary on Windows using PowerShell. And yes, it was the preinstall used to unlock the bootloader. I don't have a copy of it anymore, I seem to remember Ben64 on the IRC Freenode Channel #KrazyK giving it to me.
Huh -- so, despite the fact that Atrix4g won't do squat with regular fastboot, you're recommending it for this problem on the Droid3? Interesting. I did find the preinstall you're speaking of -- I actually found two, just in case. Thanks for your help so far, I will report back.
That's why I recommend using PowerShell (free download from Microsoft.com), it's a fully POSIX compliant shell and ADB/Fastboot is a lot more useful with it!
pplude said:
That's why I recommend using PowerShell (free download from Microsoft.com), it's a fully POSIX compliant shell and ADB/Fastboot is a lot more useful with it!
Click to expand...
Click to collapse
Roger that -- I've been using it since I installed Win7 two years ago. The only thing that's better is bash, in my opinion, and I have already seen where flashing a failed phone/bootloader only works with powershell, for some reason.
pplude said:
that's exactly it. Find the hacked /preinstall image for the atrix, mine was named (root.img). Then use adb fastboot to flash it to /preinstall. Then it'll reboot as normal. Boot into recovery, then wipe /data and /cache
Click to expand...
Click to collapse
Can you help me out with a step-to-step instruction?
I cannot boot into recovery mode, it switch to AP Fastboot mode and says "BOOT FAILURE".
jchenny said:
Can you help me out with a step-to-step instruction?
I cannot boot into recovery mode, it switch to AP Fastboot mode and says "BOOT FAILURE".
Click to expand...
Click to collapse
Did you already do a factory reset? If you haven't do not!
rynosaur said:
Did you already do a factory reset? If you haven't do not!
Click to expand...
Click to collapse
I did try to factory reset...but again it reboots to the AP Fastbook screen again, and wouldn't let me reset it...
The phone still works, just somehow the camera does not work, I have tried 3 or 4 different camera Apps, and none works...
jchenny said:
I did try to factory reset...but again it reboots to the AP Fastbook screen again, and wouldn't let me reset it...
The phone still works, just somehow the camera does not work, I have tried 3 or 4 different camera Apps, and none works...
Click to expand...
Click to collapse
I'm guessing your drivers are messed up. Did you already flash the OTA or copy parts of the OTA into your /system directory?
Hi there,
I've been searching around to find a specific firmware zip for my new tablet, the SKU: WW, Version: 10.26.1.7.
It appears that asus has pulled this file and was wondering if anyone still has this file available somehow.
I soft-bricked my tablet and am not capable of flashing any other (earlier) firmware zip.
Any help would be greatly appreciated.
Yours sincerely,
Rens "Ikkerens" Rikkerink
Ikkerens said:
Hi there,
I've been searching around to find a specific firmware zip for my new tablet, the SKU: WW, Version: 10.26.1.7.
It appears that asus has pulled this file and was wondering if anyone still has this file available somehow.
I soft-bricked my tablet and am not capable of flashing any other (earlier) firmware zip.
Any help would be greatly appreciated.
Yours sincerely,
Rens "Ikkerens" Rikkerink
Click to expand...
Click to collapse
Why can't you download an earlier firmware?
schmeggy929 said:
Why can't you download an earlier firmware?
Click to expand...
Click to collapse
I can, but it always ends up with some kind of error.
I basically tried following the steps you did:
schmeggy929 said:
i downloaded the asus firmware for 10.14.1.47. extract zip and you get a user.zip. extracted the boot.img. I fastboot erase boot, system, format system, data and cache(as you did)
fastboot -i 0x0B05 flash boot boot.img then
fastboot -i 0x0B05 flash system blob then
fastboot -i 0x0B05 flash system UL-K00C-US-10.14.1.47-user.zip
rebooted back into fastboot and bootloader showed 10.14.1.47 version.
Click to expand...
Click to collapse
But on when trying to flash the ***-user.zip, I get this error message:
Code:
$ fastboot -i 0x0B05 flash system UL-K00C-WW-10.14.1.47-user.zip
target reported max download size of 643825664 bytes
Invalid sparse file format at header magi
Edit: My bootloader version shows: WW_epad-10.26.1.7-20131108
Ikkerens said:
I can, but it always ends up with some kind of error.
I basically tried following the steps you did:
But on when trying to flash the ***-user.zip, I get this error message:
Code:
$ fastboot -i 0x0B05 flash system UL-K00C-WW-10.14.1.47-user.zip
target reported max download size of 643825664 bytes
Invalid sparse file format at header magi
Edit: My bootloader version shows: WW_epad-10.26.1.7-20131108
Click to expand...
Click to collapse
you are going to get that along with a few more errors. Wait until it is done. It will take like 10 mins and finish.
when it is done reboot in bootloader and you should see the version change.
schmeggy929 said:
you are going to get that along with a few more errors. Wait until it is done. I will take like 10 mins and finish.
Click to expand...
Click to collapse
You're getting this wrong, it does not do anything. The process immediately quits.
Ikkerens said:
You're getting this wrong, it does not do anything. The process immediately quits.
Click to expand...
Click to collapse
Ok when you get that message do you get a blinking curser?
Ikkerens said:
Hi there,
I've been searching around to find a specific firmware zip for my new tablet, the SKU: WW, Version: 10.26.1.7.
It appears that asus has pulled this file and was wondering if anyone still has this file available somehow.
I soft-bricked my tablet and am not capable of flashing any other (earlier) firmware zip.
Any help would be greatly appreciated.
Yours sincerely,
Rens "Ikkerens" Rikkerink
Click to expand...
Click to collapse
did you make any backup with cwm recovery?
try this:
unpack blob from 47 update
Code:
fastboot flash staging blob
fastboot flash recovery recovery.img
fastboot reboot-bootloader
load recovery, restore your backup
if you have not made any backup with cwm recovery, tell me.
btw fastboot flash system... is not needed here
lpdunwell said:
did you make any backup with cwm recovery?
try this:
unpack blob from 47 update
Code:
fastboot flash staging blob
fastboot flash recovery recovery.img
fastboot reboot-bootloader
load recovery, restore your backup
if you have not made any backup with cwm recovery, tell me.
btw fastboot flash system... is not needed here
Click to expand...
Click to collapse
I have not made a backup using cwm because there was no CWM available for my version.
My tablet was already updated to 4.3 and I (apparently) could not boot the cwm in the development section.
If I would be able to flash a usable recovery, I wouldn't be in this situation anyway as the asus update (.47) is flashable (found an updater-script in the zip).
Ikkerens said:
I have not made a backup using cwm because there was no CWM available for my version.
My tablet was already updated to 4.3 and I (apparently) could not boot the cwm in the development section.
If I would be able to flash a usable recovery, I wouldn't be in this situation anyway as the asus update (.47) is flashable (found an updater-script in the zip).
Click to expand...
Click to collapse
forget what I wrote here. I opened a thread with unbricking instructions. Good luck
lpdunwell said:
forget what I wrote here. I opened a thread with unbricking instructions. Good luck
Click to expand...
Click to collapse
Won't do me any good at the moment, I already managed to brick it even further (couldn't even get into fastboot mode anymore), so I RMA'd it.
Ikkerens said:
Won't do me any good at the moment, I already managed to brick it even further (couldn't even get into fastboot mode anymore), so I RMA'd it.
Click to expand...
Click to collapse
oh crap. sorry about that. I know there's the nvflash, too, but I have no idea how to use that so far...
would you mind telling what exactly happened?
lpdunwell said:
oh crap. sorry about that. I know there's the nvflash, too, but I have no idea how to use that so far...
would you mind telling what exactly happened?
Click to expand...
Click to collapse
Nvflash is inaccessible at the moment, it requires some preparation (you have to prepare it BEFORE you brick it)
Anyway, basically, I bought the tablet a few hours earlier.
Wanted to root it to remove some bloatware and restore some titanium backup thingies.
So I unlocked, rooted, basic stuff.
Went into TB, removed bloatware such as Amazon Kindle and some other irrelevant titles.
That action however, somehow caused it to be unbootable.
So I went into some basic repair stuff, as usual.
Tried to flash a recovery, only to find out, there is no working recovery. Only CWM, which required an earlier version of my bootloader.
So, what next. Restore stock? Downloaded the firmware, found out it was the earlier version of my device, because Asus removed the 4.3-EU version from their website.
So, I downloaded the .47-EU version, opened it. Saw there were no images, merely plain files meant for /system and an updater-script.
I ended up attempting to package my own system.img after that. Created an ext4 image on my computer, moved the files there. Followed the instructions in updater-script, which were mostly symlinks and stuff.
In the end of the updater-script they flashed blob to /staging and boot.img to /boot.
So, I flashed my custom system.img to /system.
Flashed boot
Flashed the blob
And beyond that point, I ended up in a bootloop of my bootloader. I could not hold down volume to enter fastboot or anything. All I could do was watch the asus logo as it constantly rebooted. (And ofcourse, no way to turn it off other than waiting for the battery to die)
Ikkerens said:
Nvflash is inaccessible at the moment, it requires some preparation (you have to prepare it BEFORE you brick it)
Anyway, basically, I bought the tablet a few hours earlier.
Wanted to root it to remove some bloatware and restore some titanium backup thingies.
So I unlocked, rooted, basic stuff.
Went into TB, removed bloatware such as Amazon Kindle and some other irrelevant titles.
That action however, somehow caused it to be unbootable.
So I went into some basic repair stuff, as usual.
Tried to flash a recovery, only to find out, there is no working recovery. Only CWM, which required an earlier version of my bootloader.
So, what next. Restore stock? Downloaded the firmware, found out it was the earlier version of my device, because Asus removed the 4.3-EU version from their website.
So, I downloaded the .47-EU version, opened it. Saw there were no images, merely plain files meant for /system and an updater-script.
I ended up attempting to package my own system.img after that. Created an ext4 image on my computer, moved the files there. Followed the instructions in updater-script, which were mostly symlinks and stuff.
In the end of the updater-script they flashed blob to /staging and boot.img to /boot.
So, I flashed my custom system.img to /system.
Flashed boot
Flashed the blob
And beyond that point, I ended up in a bootloop of my bootloader. I could not hold down volume to enter fastboot or anything. All I could do was watch the asus logo as it constantly rebooted. (And ofcourse, no way to turn it off other than waiting for the battery to die)
Click to expand...
Click to collapse
Since you are unlocked, you can try to flash the recovery (extract it first) of the US version 1.7, should be the same as wwe. Or just even try to flash the whole us update manually. And later change back to the wwe version when it comes available. The 47 update was only a minor ota for 4.2 so no image of recovery or bootloader there.
Sad story. What would have been the safe thing to do, if others wish to root their devices?
Snah001 said:
Since you are unlocked, you can try to flash the recovery (extract it first) of the US version 1.7, should be the same as wwe. Or just even try to flash the whole us update manually. And later change back to the wwe version when it comes available. The 47 update was only a minor ota for 4.2 so no image of recovery or bootloader there.
Click to expand...
Click to collapse
I still had the original recovery flashed, I never overwrote it actually. I needed a custom recovery (such as CWM, TWRP).
Flashing an US update is not possible alltogether, there are some minor differences with hardware compitability and such.
Problem is, I could've downloaded the .47 update, but I had already updated to 4.3 (BL 10.26.1.7)
Ikkerens said:
I still had the original recovery flashed, I never overwrote it actually. I needed a custom recovery (such as CWM, TWRP).
Flashing an US update is not possible alltogether, there are some minor differences with hardware compitability and such.
Problem is, I could've downloaded the .47 update, but I had already updated to 4.3 (BL 10.26.1.7)
Click to expand...
Click to collapse
I don't know if it isn't possible. On the TF700 it was only a line in the build.prop file that made the difference.
I would try it because now you have nothing and when it works you have the us version yes, but at least it works.
pelago said:
Sad story. What would have been the safe thing to do, if others wish to root their devices?
Click to expand...
Click to collapse
This guide worked fine for me; http://forum.xda-developers.com/showthread.php?t=2516215
It's only about what you do with the root ^^
Snah001 said:
I don't know if it isn't possible. On the TF700 it was only a line in the build.prop file that made the difference.
I would try it because now you have nothing and when it works you have the us version yes, but at least it works.
Click to expand...
Click to collapse
Already too late, it has been RMA'd, and then, I had nothing to flash it with.
Ikkerens said:
This guide worked fine for me; http://forum.xda-developers.com/showthread.php?t=2516215
It's only about what you do with the root ^^
Click to expand...
Click to collapse
Well I meant, what should a root user do to try and protect themselves against bricking their device like you did? Is it a matter of making sure that CWM or TWRP is on the device as a recovery partition? And are those available on TF701T yet?
Oh dear. That's a lot gone wrong.
Cwm is available and that works.
It's made by drgravy. I use it in my unbrick tut.
All i can say is, root --> cwm --> backup.
Sent from my GT-I9505 using xda app-developers app
That CWM wouldn't boot for me :/
My question is similar to 'nikpmr's troubles but different enough I think they deserve a separate post.
The Problem as UnderstoodI was trying to root my device following the guide at this website. It's so simple it's a wonder I messed up. I think my failure was that I thought the drivers installed when I connected the phone were enough so I skipped that step. Then when running fastboot flash recovery.img the install failed. So I saw on some forum that it was supposed to be fastboot flash boot recovery.img of course now I know if anything it ought to have been "recovery" not "boot".
What I've Tried & Partial SolutionAt first I was just stuck in a boot loop and selecting "sideload" from the CWM recovery failed to allow me to connect with ADB or fastboot. i.e. Running "fastboot devices" and "adb devices" both returned as having no devices connected to my computer. So I installed the HTC Sync and promptly uninstalled the non driver parts of the app. Then I installed USBdeview and used it to uninstall all the USB devices associated with my HTC First. After doing that I learned booting into HBOOT allowed me to connect to the computer using fastboot and after then booting to the CWM Recovery I was able to connect using ADB to do a sideload. So I guess I'm about halfway there. Unfortunately after looking up the newest RUU and attempting to sideload it using "adb sideload OTA_MYST_UL_1.08.502.1-1.08.502.4.zip" the sideload failed. After selecting "- install zip from sideload" I get a message twice of "failed to open driver control: No such file or directory". It also failed when I attempted it with a similar fastboot command. So from all that I surmise my ROM is ruined and just needs to be replaced.
QuestionSo how do I go about replacing this ROM and boot partition? And, which ROM should I use? Is the one I got from the RUU site suitable? And what about the radio? I just need my phone to work. I can worry about rooting later. At this point I think I know what's happened but I don't know where to begin reading to figure out how to fix it myself.
Thanks for reading,
Relevant HBOOT text:
Code:
*** TAMPERED ***
*** UNLOCKED ***
MYSTUL PVT SHIP S-ON RL
HBOOT-2.00.0000
RADIO-1.15.40.00.13_2
OpenDSP-v9.2.0268.1214
eMMC-boot
Mar 22 2013,21:29:50:1682
1. you had to type in fastboot flash recovery recovery.img NOT fastboot flash boot recovery.img
Well there was an actual all in 1 tool to get cwm/twrp & root with a click for this specific device somewhere around these threads.
1) what exactly is the problem? (Sorry it was just so many words)
I don't think side loading the RUU would work bc I haven't heard its possible to flash it in the phone itself.
2) why don't you just sideload an existing pre-rooted ROM instead of the RUU file?
3) I see you're s-on, did you try flashing just the boot.IMG from the ROM you've got on it?
BTW I've only had luck with twrp on having it successfully detected when wanting to sideload
abrahammmmmmm_ said:
Well there was an actual all in 1 tool to get cwm/twrp & root with a click for this specific device somewhere around these threads.
1) what exactly is the problem? (Sorry it was just so many words)
I don't think side loading the RUU would work bc I haven't heard its possible to flash it in the phone itself.
2) why don't you just sideload an existing pre-rooted ROM instead of the RUU file?
3) I see you're s-on, did you try flashing just the boot.IMG from the ROM you've got on it?
BTW I've only had luck with twrp on having it successfully detected when wanting to sideload
Click to expand...
Click to collapse
1) The issue is I did "fastboot flash boot recovery.img" rather than "fastboot flash recovery.img" now I don't seem to have a boot mount point.
2) That sounds best. I didn't realize the RUU want a flashable ROM. More I just have to find the updated stable stock ROM.
3) I didn't have a ROM on it. I was just trying to root stock. Seems like I'm pretty close once I find that ROM.
Thanks y'all! Between your answers I think I have enough to go on. Feel free to point me to your preferred stable ROM. I'm content with stock but it would be nice to have Tiranium BU.
bnjo said:
1) The issue is I did "fastboot flash boot recovery.img" rather than "fastboot flash recovery.img" now I don't seem to have a boot mount point.
2) That sounds best. I didn't realize the RUU want a flashable ROM. More I just have to find the updated stable stock ROM.
3) I didn't have a ROM on it. I was just trying to root stock. Seems like I'm pretty close once I find that ROM.
Thanks y'all! Between your answers I think I have enough to go on. Feel free to point me to your preferred stable ROM. I'm content with stock but it would be nice to have Tiranium BU.
Click to expand...
Click to collapse
Right now our most stable stock ROM is our rooted stock ROM
http://forum.xda-developers.com/showthread.php?t=2287811
We currently have 2 very able recognized devs working on CyanogenMod. You can expect something new in the near future but until then what I've showed you is the best.
Have any problems just come back to the thread
Success!
abrahammmmmmm_ said:
Right now our most stable stock ROM is our rooted stock ROM
http://forum.xda-developers.com/showthread.php?t=2287811
We currently have 2 very able recognized devs working on CyanogenMod. You can expect something new in the near future but until then what I've showed you is the best.
Have any problems just come back to the thread
Click to expand...
Click to collapse
Thanks guys I know I always like to know when something I said was successful in helping someone. I just wanted yall to know after sideloading the most recent Odexed ROM then pushing it to memory after it wouldn't boot I succeeded after taking abrahammmmmm's advice of flashing the boot.img from HBOOT. After a longer boot than I'm used to I was able to get into my phone again. I wasn't able to use my TitaniumBU to restore but that just meant I had to spend a few minutes selecting apps to install.. And restoring a data backup for the only important app that doesn't keep the primary data off the phone.
Thanks again!
tl;dr Flashing the Odexed ROM boot.img fixed my issues. Thx!
bnjo said:
Thanks guys I know I always like to know when something I said was successful in helping someone. I just wanted yall to know after sideloading the most recent Odexed ROM then pushing it to memory after it wouldn't boot I succeeded after taking abrahammmmmm's advice of flashing the boot.img from HBOOT. After a longer boot than I'm used to I was able to get into my phone again. I wasn't able to use my TitaniumBU to restore but that just meant I had to spend a few minutes selecting apps to install.. And restoring a data backup for the only important app that doesn't keep the primary data off the phone.
Thanks again!
tl;dr Flashing the Odexed ROM boot.img fixed my issues. Thx!
Click to expand...
Click to collapse
Great! glad to hear I could help. Yes it's always nice knowing when something I've said has helped someone in any way
bnjo said:
Thanks guys I know I always like to know when something I said was successful in helping someone. I just wanted yall to know after sideloading the most recent Odexed ROM then pushing it to memory after it wouldn't boot I succeeded after taking abrahammmmmm's advice of flashing the boot.img from HBOOT. After a longer boot than I'm used to I was able to get into my phone again. I wasn't able to use my TitaniumBU to restore but that just meant I had to spend a few minutes selecting apps to install.. And restoring a data backup for the only important app that doesn't keep the primary data off the phone.
Thanks again!
tl;dr Flashing the Odexed ROM boot.img fixed my issues. Thx!
Click to expand...
Click to collapse
i think what happened, when you typed in "fastboot flash boot recovery.img" is this
boot, is also known as kernel in aosp and rom building terms, because if you look inside a rom.zip, you will see that the kernel is the boot.img
so what happened is you flashed a recovery as kernel, and duh it wont boot cause if the kernel doesnt work, the os doesnt either
so what YOU did is you simply reflashed the stock kernel, usually after changing a kernel, it takes a while to boot cause...well you get it right?
the kernel is what android is based off of, kind of like ubuntu, its a linux os based on the original linux kernel.
russian392 said:
usually after changing a kernel, it takes a while to boot cause...well you get it right?
Click to expand...
Click to collapse
Yes I get it.
russian392 said:
i think what happened, when you typed in "fastboot flash boot recovery.img" is this
boot, is also known as kernel in aosp and rom building terms, because if you look inside a rom.zip, you will see that the kernel is the boot.img
so what happened is you flashed a recovery as kernel, and duh it wont boot cause if the kernel doesnt work, the os doesnt either
so what YOU did is you simply reflashed the stock kernel, usually after changing a kernel, it takes a while to boot cause...well you get it right?
the kernel is what android is based off of, kind of like ubuntu, its a linux os based on the original linux kernel.
Click to expand...
Click to collapse
That's what I thought happened. If I had stopped to read the help on fastboot before running "fastboot flash boot recovery.img" I wouldn't have made that mistake because I would have seen I wanted to flash recovery. One thing I *did not* know, which I'm glad to know, was that the boot.img contains the kernal. I was thinking Android was more similar to IBM style PCs than it is and therefore the boot.img was analogous to a bootloader like grub or lilo.
So the one thing I don't get is how is partitioning done? I take it Androids have some reserved partition for boot and the boot.img takes care of all system partitioning and mounts /sdcard/ for everything else. i.e. userland; appdata, media, and files. Am I guessing correctly?
bnjo said:
So the one thing I don't get is how is partitioning done? I take it Androids have some reserved partition for boot and the boot.img takes care of all system partitioning and mounts /sdcard/ for everything else. i.e. userland; appdata, media, and files. Am I guessing correctly?
Click to expand...
Click to collapse
in a nutshell yes, the boot.img uses the fstab
btw 10 posts you'll be "verified"
So the one thing I don't get is how is partitioning done? I take it Androids have some reserved partition for boot and the boot.img takes care of all system partitioning and mounts /sdcard/ for everything else. i.e. userland; appdata, media, and files. Am I guessing correctly?
Click to expand...
Click to collapse
Yep that's correct.
The name correlation is booting up requires kernel there for kernel is called beet.IMG
Thing about custom kernels, they aren't like that and simply contain modded files and pretty much an in packaged kernel.
Sent from my HTC first using xda app-developers app
stock recovery
please can anyone send me the stock recovery.img
when i try to get it from RUU it says archive is corrupted
astrit1995 said:
please can anyone send me the stock recovery.img
when i try to get it from RUU it says archive is corrupted
Click to expand...
Click to collapse
here:
http://androidfiles.org/getdownload.php?file=MystUL/Stock_Roms/stockrecovery.img
if you help, press thanks!!
Serupo said:
here:
http://androidfiles.org/getdownload.php?file=MystUL/Stock_Roms/stockrecovery.img
if you help, press thanks!!
Click to expand...
Click to collapse
Thank you for your help,i solved my problem yesterday but i think im gona need this sometime...
My nexus 6 is unlocked and is running stock 5.0.1, rooted. . It has twrp and is decrypted.
I tried to sideload the 5.1 ota but it doesnt work.
I tried flashing the new 5.1 factory image but that doesnt work.
I'm tired of all this now, I just want my phone running stock 5.1 , locked , encrypted ,unrooted so I can just get ota next time from Google whenever they send it out.
Any guidance on what I need to do would be appreciated.
Use Wug's Nexus Root Toolkit :good:
Edit : Now I'm currently "Optimising app..." loop.
I tried using tge NRT to flash it back to stock but it didn't work.
I would first make a TWRP backup, then I would flash the boot image (decrypted if you want and make sure its the new one), system, radio and then reboot. I flashed everything fine while keeping twrp on my phone but I didn't like not having a custom ROM plus it was a little laggy so I restored a TWRP backup. My phone did bootloop for a while but eventually it booted 5.1. I would be careful since 5.1 seems to be having some issues in general.
http://forum.xda-developers.com/nex...gs-nexus-root-toolkit-v1-9-8-t2947452/page101
Quote:
Originally Posted by baudi11
Same thing happened to me. Here's what I did.
1. Press and hold power, volume up, and volume down. Keep holding them down until the phone boots into bootloader mode.
2. Go back to the toolkit and click the radio button labeled "Soft bricked/bootloop"
3. Click "Flash stock plus unroot"
4. Check all the boxes under "Settings", including "Post-flash factory reset" then click OK.
5. Follow the toolkit instructions from there.
This got me out of the bootloop, successfully installed 5.1, and kept all my apps and settings. Good luck.
Click to expand...
Click to collapse
It worked for me after that. Now I'm booted in 5.1
When I try to flash the factory images directly from Google I get the following errors even though the MD5 checks out.
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
failed to allocate 1778070480 bytes
error: update package missing system.img
Press any key to exit...
celeriL said:
http://forum.xda-developers.com/nex...gs-nexus-root-toolkit-v1-9-8-t2947452/page101
It worked for me after that. Now I'm booted in 5.1
Click to expand...
Click to collapse
Thanks so much! This worked perfectly. Exactly what I needed. The past couple days have been so annoying but now it's over. Thanks again!
Giuseppe1010 said:
Thanks so much! This worked perfectly. Exactly what I needed. The past couple days have been so annoying but now it's over. Thanks again!
Click to expand...
Click to collapse
Glad to help!
You also could have extracted the zip and manually flashed the images ing fastboot
fastboot flash recovery recovery.img
fastboot flash system system.img
Etc
rootSU said:
You also could have extracted the zip and manually flashed the images ing fastboot
fastboot flash recovery recovery.img
fastboot flash system system.img
Etc
Click to expand...
Click to collapse
HaHaa. Tried and true. Always works.
prdog1 said:
HaHaa. Tried and true. Always works.
Click to expand...
Click to collapse
rootSU said:
You also could have extracted the zip and manually flashed the images ing fastboot
fastboot flash recovery recovery.img
fastboot flash system system.img
Etc
Click to expand...
Click to collapse
I agree that always works without fail and is much easier than a tool kit. I don't like tool kits because people need to learn the correct way to flash things before using one because its better to understand what you are flashing should there be an error.
Pilz said:
I agree that always works without fail and is much easier than a tool kit. I don't like tool kits because people need to learn the correct way to flash things before using one because its better to understand what you are flashing should there be an error.
Click to expand...
Click to collapse
I totally agree. Have done successful manual flash when tool kits failed. Seen on Nexus 6 already.Saved my soft brick with manual flash when tool kit failed.
Pilz said:
I agree that always works without fail and is much easier than a tool kit. I don't like tool kits because people need to learn the correct way to flash things before using one because its better to understand what you are flashing should there be an error.
Click to expand...
Click to collapse
I don't have anything against toolkits on some devices, so long as it is not used as a shortcut to learning the basics. That said, on a nexus, I don't really see any need to be honest.
rootSU said:
I don't have anything against toolkits on some devices, so long as it is not used as a shortcut to learning the basics. That said, on a nexus, I don't really see any need to be honest.
Click to expand...
Click to collapse
Thats how I feel because its so easy my wife could do it and she doesn't know anything about flashing. Toolkits are good for non Nexus devices, I just don't see a point when we need to learn things the correct way first.
I hope the bugs get sorted out so people don't hard brick their phones anyone
rootSU said:
You also could have extracted the zip and manually flashed the images ing fastboot
fastboot flash recovery recovery.img
fastboot flash system system.img
Etc
Click to expand...
Click to collapse
Im a complete fastboot novice since this is my first nexus device (always had samsung phones up until now) and although I managed to root and unlock the boot loader I want to make sure I learn all the basics including flashing (side loading?) subsequent updates.
So Im currently rooted, unlocked bootloader on a 5.01. custom rom. How would I go about flashing the 5.1 update manually?
Im assuming that once I extract the update zip file I will find all the images that need to be flashed....what order do i do them in? How do I take into account the boot loader locking issue people have been facing that results in a bricked device?
Thanks in advance.
EDIT: I found this thread which outlines what I need to do http://forum.xda-developers.com/nexus-6/general/using-image-to-update-nexus-6-data-loss-t3053158
I only have two question now:
1. Im assuming the system image will wipe out the custom rom im on but not the data will leaving the data cause a problem? whats the command line to wipe data?
2. This doesnt address the boot loader locking issue causing a brick that people have been facing. This process involves updating the boot loader what do i have to do to make sure I dont brick my device?
Thanks again
kingofkings11 said:
Im a complete fastboot novice since this is my first nexus device (always had samsung phones up until now) and although I managed to root and unlock the boot loader I want to make sure I learn all the basics including flashing (side loading?) subsequent updates.
So Im currently rooted, unlocked bootloader on a 5.01. custom rom. How would I go about flashing the 5.1 update manually?
Im assuming that once I extract the update zip file I will find all the images that need to be flashed....what order do i do them in? How do I take into account the boot loader locking issue people have been facing that results in a bricked device?
Thanks in advance.
EDIT: I found this thread which outlines what I need to do http://forum.xda-developers.com/nexus-6/general/using-image-to-update-nexus-6-data-loss-t3053158
I only have two question now:
1. Im assuming the system image will wipe out the custom rom im on but not the data will leaving the data cause a problem? whats the command line to wipe data?
2. This doesnt address the boot loader locking issue causing a brick that people have been facing. This process involves updating the boot loader what do i have to do to make sure I dont brick my device?
Thanks again
Click to expand...
Click to collapse
You could simply not update the bootloader. Bare minimum requirements is update system and boot (kernel). if you want to learn more about fastboot, go to general > All in one guide > Question 28.
If you do not update the bootloader, you'll never get an OTA but it doesn't seem like you're wanting that anyway.
In regards to data, yes it could cause a problem if you're using a custom rom. You can use fastboot erase data command. This also wipes your /sdcard though.