Anyone have idea how to reduce the vibration level on keyboard and normal tap?
I have installed a rom which have very strong vibration when typing, hope someone can help me on this, probably on registry edit..
Try to decrease the value of:
HKLM\\Software\HTC\PHONE\PhoneExtendSetting\KeyPadVibrationLevel
fighter7139 said:
Try to decrease the value of:
HKLM\\Software\HTC\PHONE\PhoneExtendSetting\KeyPadVibrationLevel
Click to expand...
Click to collapse
Thank, has tried but it only reduce phone keypad vibration, the keyboard and other vibration still very high
Maybe this can help:
http://forum.xda-developers.com/showthread.php?t=425063
Related
I usually have my phones on a scheduled soft reset in the middle of the night. I put it face down so the light wouldn't wake me but the Kaiser(Qualcomm) does a vibrate pulse as if I needed that... Anyone know how to disable that?
Put it in your sock? *cough*
i wanna to know the answer too....
Anyone?...
juiceppc said:
I usually have my phones on a scheduled soft reset in the middle of the night. I put it face down so the light wouldn't wake me but the Kaiser(Qualcomm) does a vibrate pulse as if I needed that... Anyone know how to disable that?
Click to expand...
Click to collapse
Stop the scheduled soft-resets?
NuShrike said:
Stop the scheduled soft-resets?
Click to expand...
Click to collapse
I have a couple ideas but they involve either a hammer, or a fish tank.....
Seriously I am looking around but have not found anything yet
Sorta weird you can't disable this :|
Diable vibrate
OK.. might seem odd but a found some materail that said that some of the software used to disable the led with kill the vibrate feature... I could not find the software.. but it give a place to start
collinssc said:
some of the software used to disable the led with kill the vibrate feature
Click to expand...
Click to collapse
There is a software, but I think a registry tweak will be easier:
Code:
Hkey_Local_Machine/Drivers/Builtin/AllLEDMgr
Change the "Index" value from 1 to 0
Soft-reset the device
Killing the vibrate isn't a feature, it's a consequence in this case.
And, it's not killing the vibrate on reset/power on.
I think this is something on the chipset level that can only be resolved by a altered ROM or "chipset" update from Qualcomm...??
stop vibrate at every soft-reset
Has someone been able to stop the vibrate starting at every soft-reset ?
I prefer to think of it more as a shudder whilst yawning as it wakes up
How to reduce the vibration time period ?
When I put my PPC in vibration mode and a remind alarm arrives, my PPC is vibrating for a TOO much long time ! I just want it to make, 1 short vibration , how do configure the PPC to do that ?
chris247 said:
Has someone been able to stop the vibrate starting at every soft-reset ?
Click to expand...
Click to collapse
Surely this must be a hardware issue which can't be changed?
I've change my ROM and radio more times than i can remember and still have the same issue. Correct me if i'm wrong but don't some of these ROM bases even come from different WM hardware (which doesn't have this problem)?
I don't think the vibration duration is linked with the hardware, there must be a way to configure this, as it is possible to configure the ringtone to increase the sound or not.
Anyone has already tried changing the vibration duration ?
chris247 said:
How to reduce the vibration time period ?
When I put my PPC in vibration mode and a remind alarm arrives, my PPC is vibrating for a TOO much long time ! I just want it to make, 1 short vibration , how do configure the PPC to do that ?
Click to expand...
Click to collapse
There's 2 ways you can put your phone into vibration mode:
1: tap the speaker icon on the top bar of the phone and select "vibrate" from the on, vibrate, off options.
2: tap the speaker icon on the top bar and leave it set to "on", but drag the two volume sliders to the bottom.
If you use method #1, when you get a notification it will give you 3 short bursts of vibration.
If you use method #2, the duration of vibration for reminders and other notifications (email, sms, etc.) is related to the length of the audio alert. I have my phone set to make noise and vibrate at the same time and when I get a message, it vibrates for the entire time that it's making noise, and not a bit longer. When I drag the volume sliders down instead of putting it exclusively into "vibrate" it vibrates for the same amount of time, so I imagine it is still playing the sound file I have associated for that notification, just not outputting it to the speaker, and vibrates while the sound file is playing.
So if you want a shorter vibration when your alarm arrives, choose a shorter beep, tone, jingle, whatever sound you want it to make when you get an alarm. Or use option #1 for putting it into vibration mode if the 3 short bursts are acceptable to you.
The vibrate upon startup is some low level thing, and I have no idea how to change it.
I'm not sure if this is the right place for this, but I was wondering if there is a program or something I can use to reduce the intensity of the vibrator on the Kaiser.
whester said:
I'm not sure if this is the right place for this, but I was wondering if there is a program or something I can use to reduce the intensity of the vibrator on the Kaiser.
Click to expand...
Click to collapse
Not a program, but if you open the phone and solder a resistor in with the vibrate motor it will lower the voltage to the motor, hence less vibration.
Did this on a friends moto v365
hah, nice!
How about if we want to increase the intensity?
You will have to increase the power send to your vibration motor. You can do it by removing a resistor or add power. I do not know if there is a resistor in the TyTN II that will increase the intensity of your vibration when removed.
I was thinking how useful it would be to simply flick the volume rocker to dim the screen indoor and then as soon as you go outdoor and need a brighter screen whilst in an app, to just simply click the volume button!
Does this make sense and does anyone know if its possible?
Thanks
I don't know if it is possible but if it is i htink you will loodse the functionality to cange the volume. right now i prefer to change the volume
Yea I understand your point, however I find myself requiring to change brightness more than I do volume so personally it would be more useful!
Is the automatic light-sensing brightness feature not good enough for you?
It works ok but uses more battery than being able to turn brightness right down while inside and then to what you need when your outside, i like control of it basically haha!
So there is no way you can configure your buttons to do what you want them to do?
I've looked in all the threads opened with vibration problems but haven't found my issue.
Which is : the vibration intensity raises with each press ( I think it has 3 vibration intensity ) To be more precise if , for example, I press the back button once I get a low intensity vibration, but if I pressed it quickly for 3,4,5,6 times I can hear how the vibrator increases the intensity and stays that way. So the intensity is not the same if I press the same button once or more times.
Has someone this behavior on their phones? Maybe is normal, but in my old S2 the vibration was constant form the beginning. Thanks!
L.E. : At least answer me please if your phone's vibration is ok, just test it by pressing the back button once, and then press it again for about 6 times repeatedly if you have haptic feedbak enabled
Happens on my phone too. Might be that the vibration engine needs to be more precisely controlled (could be done with software, maybe).
I also have this issue which I find rather annoying when pressing the back button quickly.
Sent from my C6603 using xda app-developers app
It's completely normal. The vibration is sort of a spinning disc and it needs about half a second to spin up to high speed. When you trigger short vibrations repeatedly it doesn't stop completely between each tap and the vibration feels stronger.
Ambroos said:
It's completely normal. The vibration is sort of a spinning disc and it needs about half a second to spin up to high speed. When you trigger short vibrations repeatedly it doesn't stop completely between each tap and the vibration feels stronger.
Click to expand...
Click to collapse
Thank you, this now makes sense.
Sent from my C6603 using xda app-developers app
The same here!
It's normal!
It is normal for Xperia Z maybe, but I haven't seen a phone that does same (Xperia U,J, Samsung S2,S3,Note2, HTC Sensation, Iphone 4,5, S3 Mini, even Allview etc.) , feels like a cheap phone vibration in my opinion. If I type on my keyboard, and I type really quick, the phone is continuous vibrating, that sucks in my opinion, where is the haptic feedback in this?
P.S. thank you all for answering, I thought that my phone had a hardware problem.
Try changing the vibration intensity in the keyboard settings, worked for me
vibecatalin said:
It is normal for Xperia Z maybe, but I haven't seen a phone that does same (Xperia U,J, Samsung S2,S3,Note2, HTC Sensation, Iphone 4,5, S3 Mini, even Allview etc.) , feels like a cheap phone vibration in my opinion. If I type on my keyboard, and I type really quick, the phone is continuous vibrating, that sucks in my opinion, where is the haptic feedback in this?
P.S. thank you all for answering, I thought that my phone had a hardware problem.
Click to expand...
Click to collapse
Thread revival. I am experiencing the exact same thing on my Z Ultra. It feels really awkward to my Note 2. Not sure if it really is 'normal', just bad implementation.
It is normal. I ve tested it on several Sony Z . I ve even changed the vibrator in one of them and it is the same thing. That is how the module works.
Ambroos said:
It's completely normal. The vibration is sort of a spinning disc and it needs about half a second to spin up to high speed. When you trigger short vibrations repeatedly it doesn't stop completely between each tap and the vibration feels stronger.
Click to expand...
Click to collapse
i wanted to say this but you did it before i do:laugh:
This is 100% true
I discoverd this when i Smashed a ps2 controller
After fixing the vibration problem now I this issue appears
Can it be fixed by replacing the vibration motor?
i think we can change value of vibration intensity by this app
https://play.google.com/store/apps/details?id=com.dunnow.software.vibrationTuner
but this app not support other device i can't change value anymore
z3c weak vibration i think sp stronger vibration
Depump said:
i think we can change value of vibration intensity by this app
https://play.google.com/store/apps/details?id=com.dunnow.software.vibrationTuner
but this app not support other device i can't change value anymore
z3c weak vibration i think sp stronger vibration
Click to expand...
Click to collapse
Are you rooted?
davebugyi said:
Are you rooted?
Click to expand...
Click to collapse
root already
i found something about change vibrator in other device
http://forum.xda-developers.com/showthread.php?t=1805815
http://forum.xda-developers.com/showthread.php?t=1626756
Found someone a good way to change the intensity of the vibration, manly i would like to reduce the vibration.
I tried the script but it didn't worked. Any ideas?