Kies refuses to update to an "official" firmware because it believes the phone is not fully charged. I have this on several different PCs, different versions of Kies (including the most up to date version) and several different firmware versions.
I've charged the device and tried upgrading immediately after the "ding, battery fully charged" notification comes up, and also left the phone charging overnight. Also... I did the batterystats.bin fix to see if that made any difference. No luck.
Kies seems to check this before or around the time it actually downloads the file, rather than checking the registry for details transfered from the phone during initial connection.
Does anyone have any deeper knowledge of the inner workings of Kies? Is it possible to trick Kies in the same way as we have to get available upgrades, but to get it to ignore battery level while flashing?
Thanks in advance for any help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bump. what battery fix ?
Hello
i have a same problem...
Can you help me?
Regards,
Delphine.
sometimes is Kies that it's bugged
uninstall kies and delete the kies folder in the hard drive
the reinstall kies, the latest version
click on the SGS wiki link and get the latest kies download
Related
I was trying to do the gingerbread on this new tab for my buddy. But, it failed and for some reason, I cant get it to do anything. Take a look at this picture and help me figure this out please.
If I can atleast get it back to stock, I can try to other methods, however, it wiped off the original bootloader and I cant find the bootloader anywhere.
Help! Please!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, there!
I have the same problem with my tab. I left it OK at the evening and the very next morning I found it dead with black screen. Restore mode didn't work either, so I decided to re-install the software. After installing the Gingerbread it cannot load properly always giving me the same errors.
At the service centre they told me that I need to replace the memory chip, because it's faulty. However, they didn't know the exact problem, because my device wasn't bought in my country.
Did no one know anything about this??? Just found my Tab dead after having ICS on it for nearly 2 weeks....pretty stupid. I'm stuck with all these "can't mount" errors. Nothing I've tried will fix this issue. Any insight would be appreciated on this matter.
Download the Kies and tried to install it.. The problem pop up..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i have been searching in the internet and still cant find the solution.. Please help me guys..
Are you installing Kies or Kies Mini? Did you download it from the Samsung website?
And the obvious question - are you connected to the internet when you try to install?
Check your anti virus to see if your getting firewalled.
@jack man
Im installing Kies.. first download at the samsung website, second at softpedia.. no luck..
and im already connecting to the internet..
@mrhaley30705
i tried disable my windows firewall and turn off my anti virus.. still no luck..
anyone got more idea? need to update my Cappy for my final year project.. *sob*
Try downloading Kies Mini as that is the program that upgrades your phone. Kies is a **** program to begin with but the mini version has been much more reliable.
http://www.softpedia.com/get/Internet/Telephony-SMS-GSM/Samsung-Kies-Mini.shtml
Also, make sure you are doing the basic things to troubleshoot this like doing a full shutdown and reboot of your PC. It could just be a problem that occurs with some programs that are run right after download.
msg me your email address to my number 9964030331 i will help you you problem 100% solve
[email protected]
samsung kies mini/kies2/kies3 not install show no internet connection please help me sir.
hello guys,
i've formatted my sd card and restored deafault settings on my phone. I was using Pete's Rom Final Update.
Now i enter to download mode to put my new rom inside my phone but my pc can't read it, i just get
usb read transaction failed
odin: oops
so i'm fuccking stucked. :/
any ideas?
nothing at all?
remove installed drivers and install it again
thelastbad said:
remove installed drivers and install it again
Click to expand...
Click to collapse
i've tried but it's still now working, maybe i should search for an older version of kies? how can you know it's not a cell's issue?
Take it easy ... you still able to access CWM recovery ?
hey jack mower? still have this problem?
i have the same problem,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
heres my problem.
actually i soft bricked my phone, no files at all but still can access recovery but my pc wont recognize the phone
try to install samsung kies if you're on stock 2.3
or download the correct drivers for 6500 !
hey guys, so i've been thinking of updating my phone to the latest firmware, but the problem is that my USB port doesn't work very well. It takes me 10 to 15 mins to get the phone to start charging or connected to the computer. Sony won't repair the damn thing cause of excessive damage. I need to know if i can safely update without flashing FTF files which include the kernel. I also tried going to pure stock directly from Sony, but PC companion won't restore the phone since i'm on a custom ROM (Existenz Ultra 5). Can any provide me with the PCC firmware file of the latest release? or any other help would do.
Also, i cant enter flash mode since the port is damaged.
Sony PCC says it doesn't have any software for my phone even when i click the restore button.
Thanks.
Unfortunately, I don't think there's anything you can do. As far as I know, you cannot manually load firmware with the PC Companion.
I think the only thing you can do is to get your USB port repaired. Try to find a third party repair shop that will do it for you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
One day, after my rooted tablet ran out of battery, it didnt boot anymore and there was black screen and something with kernel was written in a corner, i dont remember it, but the solution was that i unroot it and flash it with the right stock android.
I used ODIN and while it was like 25% percent flashed, the connection with the usb broke and then the flash failed and if it try it again, it fails again.
My tablet always loses the usb connection, it connects for a sec, then disconnects, then connects for a sec, then disconnects, maybe it even has loose contact on the tablet or the pc. (the samsung usb connect firmware is uptodate)
Now the screen is blue and it says: An error has occurred while updating the device software. Use the emergency recovery funktion in the smart switch pc software.
Pls help me out, im a noob in rooting and co and need ELI5
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thread closed at OP request.