Related
I have a rooted nexus one running cm7.2 and it won't boot to boot loader or recovery or rom o
Sent from my SGH-T959 using xda app-developers app
Or fast boot so I can't do anything am I bricked
Sent from my SGH-T959 using xda app-developers app
Try to use passimg.zip method. Google it download that zip put it in or main SD. Hold trackball + power button. Good luck
Sent from my Nexus One using Tapatalk 2
I can't get to fadtboot or boot loader so I cantbdo passimage
Sent from my SGH-T959 using xda app-developers app
n1noob13 said:
I can't get to fadtboot or boot loader so I cantbdo passimage
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Do you have ADB and fastboot software installed in your PC? Either have that or download Android SDK. You can boot your phone via ADB command lines.
Yes I have it but nothing will work the charging lightbwont lightvwont light up orbanything
Sent from my SGH-T959 using xda app-developers app
Your phone needs a JTAG repair.
Sent from my Nexus One using xda app-developers app
humzaahmed155 said:
Your phone needs a JTAG repair.
Sent from my Nexus One using xda app-developers app
Click to expand...
Click to collapse
what is mean?
Search.
hi
humzaahmed155 said:
Your phone needs a JTAG repair.
Sent from my Nexus One using xda app-developers app
Click to expand...
Click to collapse
Hi. my N1 is totally dead(i think) wont boot still showing X logo and lock. I tried everything. When using Nexus 7 toolkit, toolkit say device found (showing serial number). But when i try flash using adb command everytime i get message device not found. What is problem, what is wrong?
Thanks
bagi576 said:
Hi. my N1 is totally dead(i think) wont boot still showing X logo and lock. I tried everything. When using Nexus 7 toolkit, toolkit say device found (showing serial number). But when i try flash using adb command everytime i get message device not found. What is problem, what is wrong?
Thanks
Click to expand...
Click to collapse
Can you reach the boot menu by pressing the volume down key while powering on?
Otherwise, try to check if fastboot is able to see your device and flash some new boot and system image
You have a Nexus One, not sure why you're using the Nexus 7 Toolkit..
hi
tommert38 said:
You have a Nexus One, not sure why you're using the Nexus 7 Toolkit..
Click to expand...
Click to collapse
Hi, only Nexus 7 Toolkit shows device is connected. adb mode not responding. i've just tried N7 Toolkit
---------- Post added at 10:54 PM ---------- Previous post was at 10:45 PM ----------
efxbug said:
Can you reach the boot menu by pressing the volume down key while powering on?
Otherwise, try to check if fastboot is able to see your device and flash some new boot and system image
Click to expand...
Click to collapse
Thank you for asking. able to enter boot menu and fastboot menu. but cant flash anything, i'll tried new boot new system img's. Nothing. When connecting to PC fastboot showing Fastboot USB mode is enabled. unable to do nothing via adb mode. adb mode say error device not found.
Thanks for answer
Are drivers installed? And have you installed adb and fastboot correctly?
tommert38 said:
Are drivers installed? And have you installed adb and fastboot correctly?
Click to expand...
Click to collapse
Yes, installed correct. it show up in the Device Manager list.
Anyway, i go to try this driver. Thanks. Let me know u
hmm. unlucky. Still nothing. Windows take a signal when connecting phone shows on fastboot menu => fastboot usb and adb mode say error device not found:crying:
i scanned my drivers using driver genius v11, i saw android driver named Samsung_Android_4.0_usbdrivers. now i think its something wrong with my boot.img?
When you see fastboot usb, and you type fastboot devices in a terminal, what does it say? ADB only works in recovery or when your ROM is booted, so just focus on fastboot.
it say when N1 is fastboot usb mode "error device not found". thanks for advance. tomorrow i'll be ask more.
Sent from my YP-G70 using xda app-developers app
Hey guys. Finally my N1 detected in adb mode. Im used Nexus 7 toolkit, downloaded N1 official Rom (i used only boot.img from zip file)
1st ive installed toolkit, then flashed boot.img (from official rom) to /system/ folder. Finally Windows device manager say detected new device and downloading drivers.
Started cmd.exe typed adb shell => adb mode showed HT9**********. Now problem is wont boot. What i do now? :silly:
i hope u can enter fastboot usb mode. if so try flashing any recovery.img
Sent from my Nexus One using Tapatalk
Hey everyone. A friend of mine at work asked me to help fix her nexus one and I'm at an impass. I don't have her SD card, but I can get into Fastboot and the bootloader.
She can boot up to the Nexus symbol and unlocked symbol, but not recovery. Can I completely start from scratch using Fastboot commands or something?
Durkbeef said:
Hey everyone. A friend of mine at work asked me to help fix her nexus one and I'm at an impass. I don't have her SD card, but I can get into Fastboot and the bootloader.
She can boot up to the Nexus symbol and unlocked symbol, but not recovery. Can I completely start from scratch using Fastboot commands or something?
Click to expand...
Click to collapse
You can erase everything with fastboot and then flash fresh recovery. Use amon RA or 4EXT recovery
Sent from my Nexus one using xda app-developers app
Stupid story short my jellybeer's android crashes upon boot up, I forgot to turn usb debugging on before I killed it, When I go into recovery it locks up on the google logo, but I can get into fastboot which if i'm correct i could adb into it right?
Download the wug fresh toolkit and click flash back to stock and unroot and check device can't boot option
Sent from my Nexus 7 using Tapatalk HD
Thanks, I installed the ADB drivers and it suddenly went into cwm.
Ohh sweet
Sent from my Nexus 7 using Tapatalk HD
So I've been trying to install Plasma Active on my Nexus 7. I followed the PA wiki and everything was going well. I got MOSLO installed, and then extracted the PA tarball and then rebooted. It didn't boot into PA, but the wiki mentioned that it might not. So it has a section describing some commands to run in fastboot to get it to boot PA at this point.
The problem is that after I installed MOSLO and extracted PA, I can no longer see the Nexus 7 with fastboot. When I run "fastboot devices" or "adb devices" nothing shows up.
Any one have any thoughts on what might be going on?
Thanks for your help!
Your N7 is in bootloader mode and all PC drivers are installed correct?
Sent from my Nexus 7 using xda app-developers app
BlackFire27 said:
Your N7 is in bootloader mode and all PC drivers are installed correct?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Correct. Fastboot worked fine when I unlocked the N7, and then when I installed moslo. But after installing PA, fastboot no longer sees the N7.
arbulus said:
Correct. Fastboot worked fine when I unlocked the N7, and then when I installed moslo. But after installing PA, fastboot no longer sees the N7.
Click to expand...
Click to collapse
What exactly is moslo? It may have interfered with the bootloader.
Sent from my SPH-M830 using xda app-developers app
BlackFire27 said:
What exactly is moslo? It may have interfered with the bootloader.
Sent from my SPH-M830 using xda app-developers app
Click to expand...
Click to collapse
The wiki isn't totally clear on what part MOSLO plays.
I would link you to the wiki that I followed, but the forum is preventing me from putting urls in my post.
Does it do ANYTHING? Hopefully it isn't in nvedit mod.
ADB is only good when you have the phone booted up and USB Debugging turned on.
Fastboot commands only work when the device is in bootloader mode.
If your phone is past bootloader mode, but getting stuck in a bootloop or something, then ADB will be unavailable too.
Try Turning the phone off completely, holding VOLUME DOWN + UP + POWER until it boots into the Bootloader. Then Connect it up to the PC and run your fastboot commands.
Can you get into any form of custom recovery? If so you have a few options that could help.
Sent from my SPH-M830 using xda app-developers app
player911 said:
Does it do ANYTHING? Hopefully it isn't in nvedit mod.
ADB is only good when you have the phone booted up and USB Debugging turned on.
Fastboot commands only work when the device is in bootloader mode.
If your phone is past bootloader mode, but getting stuck in a bootloop or something, then ADB will be unavailable too.
Try Turning the phone off completely, holding VOLUME DOWN + UP + POWER until it boots into the Bootloader. Then Connect it up to the PC and run your fastboot commands.
Click to expand...
Click to collapse
If I hold power and volume down, I can boot into the bootloader. same if I hold power and both volume keys. That's what gives me fastboot access (or would normally).
I can do that. And I can boot into the MOSLO. But I cannot get into Plasma Active. One of the last errors that I can see before MOSLO reboots is "no rootfs found. ignoring."
When I first started, I could hold power and volume down to get into the bootloader, and my computer could see it from fastboot. That is how I unlocked the bootloader and flashed the MOSLO. But once I installed Plasma Active, I couldn't see the device in fastboot anymore. And instead of booting into Plasma Active, it just shows the dead android on its back with the red triangle exclamation point.
Since the xda forum won't let me post links, if you google "install plasma active on nexus 7", the second option is the wiki for the project I'm following.
rtsati the
BlackFire27 said:
Can you get into any form of custom recovery? If so you have a few options that could help.
Sent from my SPH-M830 using xda app-developers app
Click to expand...
Click to collapse
No. If I'm in the bootloader and tell it to reboot into "recovery mode", it just shows me the dead android with the red triangle exclamation point. I imagine that is because android is no longer on the device. Which is what I want. I'm trying to put a new OS on here. Though I don't suppose that helps much.
arbulus said:
No. If I'm in the bootloader and tell it to reboot into "recovery mode", it just shows me the dead android with the red triangle exclamation point. I imagine that is because android is no longer on the device. Which is what I want. I'm trying to put a new OS on here. Though I don't suppose that helps much.
Click to expand...
Click to collapse
Android with red triangle and exclamation mark means you don't have a custom recovery installed.
No fastboot and no custom recovery...does MOSLO have any form of options?
Sent from my SPH-M830 using xda app-developers app
So does this replace android completely or does it dual boot?
Sent from my HTC One using xda premium
---------- Post added at 11:46 AM ---------- Previous post was at 11:29 AM ----------
Did a little research and there is a dual boot option, you just use the dual boot tool and flash a zip and you have plasma active as a ROM.
Sent from my HTC One using xda premium
spitfire2425 said:
So does this replace android completely or does it dual boot?
Sent from my HTC One using xda premium
---------- Post added at 11:46 AM ---------- Previous post was at 11:29 AM ----------
Did a little research and there is a dual boot option, you just use the dual boot tool and flash a zip and you have plasma active as a ROM.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Yeah, there's the dual boot option. Though I chose to go with the single OS option. In that case, it does repalce Android completely.
I just tried to flash 2nd booltloader and tarp recovery on my 7". I went to reboot into recovery one got a Bootloop. It flashes kindlefire for 5 seconds and then goes black for 5 seconds and on and on for about a minute and then shuts down. When I try fastboot my computers hang at and adb says no device. I searched the forum and googled and found nothing so I'm sorry if I missed the answer somewhere. I do have the drivers installed on my computer. I appreciate any help or advice
Sent from my LG-E970 using xda app-developers app
popshovit said:
I just tried to flash 2nd booltloader and tarp recovery on my 7". I went to reboot into recovery one got a Bootloop. It flashes kindlefire for 5 seconds and then goes black for 5 seconds and on and on for about a minute and then shuts down. When I try fastboot my computers hang at and adb says no device. I searched the forum and googled and found nothing so I'm sorry if I missed the answer somewhere. I do have the drivers installed on my computer. I appreciate any help or advice
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Im haveing the same problem
Yeah I tried everything I know of so hopefully someone has a trick. I'm thinking about sending it for warranty but if they see it was rooted then I might be sol.
Sent from my LG-E970 using xda app-developers app
You say you got in in fast boot or that you were trying to from adb? Because if your trying to get it in fast boot your going to need a factory cable. From there once its in fast boot you plug it back in to your PC with the normal cable and run fastboot.exe -i 0x1949 getvar product
That should return Tate something. If that happens you should be able to fix it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
I can't even get it in fastboot. I have the cable that it came with. maybe I'm nit doing something right. How should I do it with the factory cable. So far I've tried adb = device not found and fastboot = waiting for device
Sent from my LG-E970 using xda app-developers app
popshovit said:
I can't even get it in fastboot. I have the cable that it came with. maybe I'm nit doing something right. How should I do it with the factory cable. So far I've tried adb = device not found and fastboot = waiting for device
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
A factory cable puts kfhd7 in fast boot automatically, not the cable that comes with device,search eBay for Motorola factory cable around 4 euros
Thank you. I'll give this a try
Sent from my LG-E970 using xda app-developers app
fixed
So i ordered the factory which put it right into fastboot. downloaded kfhdsrt, restored system,boot,recovery and it booted up and is running great. thanks for the help. it as fixed within a half hour from when i got the factory cable in the mail :good: