Hello
I have a question : How to run CyanogenMod 6.0.0 on the emulator? I have the system.img create from the update.zip but the emulator don't boot, it stay on "ANDROID _"
Thanks
Related
I currently am running an older version of jf's recovery image and would like to upgrade to Cm recovery 1.4.
I have looked through the fourms and can't find any help on installing a new recovery image over the old one. I was just wondering if I would have to install it like I did with the first one, downgrade my phone and all that or is there a way I can insatll it with out having to do all those steps over again.
Thanks for you help in advance
Ps. Didn't really know where to post this thread sorry if it is in the wrong area..
Hi,
This should really be in the Q&A section.
To answer your question, save the .img on to your SD card, do not rename it, go to your terminal emulator and type flash_image recovery /sdcard/cm-recovery-1.4.img
As long as you did not rename the file, and you spell the commands right, then you should be golden.
QUESTION !!!!!!!!!! >>>> Q&A Section !!!
don't forget the su. also you will want to do reboot recovery so you can see your pretty new recovery image.
thanks
Thanks for all the help guys
ps
And I guess I brain farted not putting it in the Q&A section, my bad
still not working
ironnius said:
Hi,
This should really be in the Q&A section.
To answer your question, save the .img on to your SD card, do not rename it, go to your terminal emulator and type flash_image recovery /sdcard/cm-recovery-1.4.img
As long as you did not rename the file, and you spell the commands right, then you should be golden.
Click to expand...
Click to collapse
I did what you said it it didn't work, it gave me the message, this was all done in terminal emulator.
"error writing recovery : Permission denied"
Is there something i have to do to allow this?
do the following in terminal emu
su
flash_image recovery /sdcard/cm-recovery-1.4.img
Put the recovery img on the root of your ad card
Installing the CyangenMod Recovery IMG
1. Open up the Terminal App on your phone
2. Type in su then press on "Always Allow"
3. Type in the following:
Code:
cd /sdcard
wget http://n0rp.chemlab.org/android/cm-recovery-1.4.img
flash_image recovery /sdcard/cm-recovery-1.4.img4. Done! Easy as Pie
Fingerlickin said:
do the following in terminal emu
su
flash_image recovery /sdcard/cm-recovery-1.4.img
Click to expand...
Click to collapse
thank you that worked
1sickat said:
Put the recovery img on the root of your ad card
Installing the CyangenMod Recovery IMG
1. Open up the Terminal App on your phone
2. Type in su then press on "Always Allow"
3. Type in the following:
Code:
cd /sdcard
wget http://n0rp.chemlab.org/android/cm-recovery-1.4.img
flash_image recovery /sdcard/cm-recovery-1.4.img4. Done! Easy as Pie
Click to expand...
Click to collapse
yes please download the recovery image and put it on the sdcard, THEN download the recovery image AGAIN using the wget command and replace the first one. THEN use the flash_image command which requires su permissions WITHOUT getting those permissions first.
Sorry, in a bad mood today.
I have an MTS CDMA HTC Hero, and I'm un able to put a custom recovery image on. I went into that HBOOT menu and at the top it says "S-ON" and I was reading that it needs to say "S-OFF" in order for me to put a custom recovery like Clockwork Mod onto it. My phone is rooted, I used z4root. I have no idea how to put the custom recovery on. And I cannot find the free version of ROM Manager in the market, and I tried the appbrain method and putting the .apk on my sd card method and nothing is working
Any help would be appreciated
Thanks!
xcolester5x said:
I have an MTS CDMA HTC Hero, and I'm un able to put a custom recovery image on. I went into that HBOOT menu and at the top it says "S-ON" and I was reading that it needs to say "S-OFF" in order for me to put a custom recovery like Clockwork Mod onto it. My phone is rooted, I used z4root. I have no idea how to put the custom recovery on. And I cannot find the free version of ROM Manager in the market, and I tried the appbrain method and putting the .apk on my sd card method and nothing is working
Any help would be appreciated
Thanks!
Click to expand...
Click to collapse
Our phone does not require S-OFF to flash a custom recovery. When I get to a computer I'll upload a recovery.img for you to download. Until then download Terminal Emulator and Busybox Installer. With Busybox Installer open it and install busybox
私のEVO 3Dから送信される。
there should be aman ra or an older recovery in the wiki
Whenever I put my hero into recovery mode I also get this red exclamation mark with a phone beside it. Is that because I don't have a custom recovery installed on the phone or?
And I'm also not too sure how to install a custom recovery on the phone.
Flash recovery using: ADB
NOTE: This method will work while you are booting into the current recovery on the phone.
1.Download the ClockworkMod Recovery: HeroC
2.Copy the recovery.img to root of the SD card.
3.Boot the phone into recovery.
4.Open command prompt, cd to the Android SDK directory & type the following commands:
adb shell
mount /sdcard
flash_image recovery /sdcard/"name of recovery".img
reboot recovery
5.Your phone should now reboot into the ClockworkMod Recovery (orange text for 3.0+).
Flash recovery using: Terminal Emulator Note: Requires s-off, otherwise you'll recieve "out of memory" errors.
1.Download the ClockworkMod Recovery: HeroC Download Optimus V Download.
2.Move recovery.img to root of the SD card.
3.Open the Terminal Emulator on the phone & type the following commands:
4.:
su
flash_image recovery /sdcard/"name of recovery".img
reboot recovery
5.The phone should now reboot into the ClockworkMod Recovery (orange text for 3.0+).
Whenever I type in the first code I get "error: device not found" and I have my phone in recovery mode
do you have android sdk installed on your computer, if no , install it. if yes, open a command prompt and type,
cd C:\android-sdk-windows\tools
next type:
adb devices
it should list your device
next type:
adb shell
you should get a # sign
then procede from there
or try the terminal emulator method,,,much easier. you can get "terminal emulator " from android market...good luck
whenever I change my directory to the tools folder ADB doesn't work, but when I change it to the "Platform-Tools" folder ADB works.
Sorry for being such a pain-in-the-butt, but I'm new to this whole rooting stuff.
What's the terminal emulator method?
I was trying to do this method
"Type in the following commands:
adb push recovery-clockwork-2.5.0.7-heroc.img /sdcard/recovery-clockwork-2.5.0.7-heroc.img
adb shell
su
cd /sdcard/
flash_image recovery recovery-clockwork-2.5.0.7-heroc.img
reboot recovery"
but that doesn't seem to be working for me either, that's where I get the "Flash_Image: not found" error
Hello friends im here to tell you how to flash boot logo without pc
First of all you need a rooted Android one device or any rooted device .
Then download terminal emulater from.play store .
(#edit :-if you're using stock rom then need busybox installed)
Instructions
1. Download terminal emulator
2. install and open terminal emulator
3. Type SU And press enter
4. Give root access
5. Now Type Or Copy Past This Command in terminal emulator :.dd if=/sdcard/backups/logo.bin of=/dev/block/mmcblk0p11 press enter
8. Done your backup is restored or Flashed new one
Pls help
you need to flash recovery image by dd command via terminal or adb shell.
first Download the latest TWRP image file (.img) from the download linkhttps://dl.twrp.me/yuga/
Place it in the root of your /sdcard folder and rename it to twrp.img
Run the following commands via adb shell or a terminal emulator app:
Code:
su
and then
Code:
dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
and its done.
press thanks if it was helpful.
It works
Sent from my Xperia Z using XDA Free mobile app
says if=illegal argument or already set
using cm 12.1 nightly
device: xperia z c6602
Work om 6.0?
Just use the TWRP Manager.
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
Anyone here on stock Android 10 March patch and rooted? can you extract your splash img using terminal
Create Folder /sdcard/splash/
Run Terminal Emulator
Code:
su
dd if=/dev/block/bootdevice/by-name/splash of=/sdcard/splash/splash.img
exit
i wanted to see if the stock image of bootloader still uses 1080x1920 because i was making an splash.img