Related
Eager to be able to use the GPS in my phone I began upgrading it with the new dopod-ROM. I unlocked it with the sspl-trin.exe and started the process. After approx 58% of upgrading it halted, complaining about communication error. The upgrade program asked me to remove the battery for 3 seconds. I did so and the screen returned to the red,green,blue-thing. The upgradeprogram now complains about the CID, since the sspl-trin.exe is not running, and it won't install the new ROM. Niether do I find a way to get back to my old ROM. I guess I need to install the old one again...
Where can I find an old ROM?
Can I fix the phone without reinstalling?
I'm stuck with the RGB-screen and can't do anything at all with my precious piece of plastic, so please help!
/ Pete
Magician -> Tornado -> Trinity
pter said:
Eager to be able to use the GPS in my phone I began upgrading it with the new dopod-ROM. I unlocked it with the sspl-trin.exe and started the process. After approx 58% of upgrading it halted, complaining about communication error. The upgrade program asked me to remove the battery for 3 seconds. I did so and the screen returned to the red,green,blue-thing. The upgradeprogram now complains about the CID, since the sspl-trin.exe is not running, and it won't install the new ROM. Niether do I find a way to get back to my old ROM. I guess I need to install the old one again...
Where can I find an old ROM?
Can I fix the phone without reinstalling?
I'm stuck with the RGB-screen and can't do anything at all with my precious piece of plastic, so please help!
/ Pete
Magician -> Tornado -> Trinity
Click to expand...
Click to collapse
Check FTP for HTC shipping ROMs if your device was non-branded.
If upgrade soft complains about wrong CID for HTC ROM, try to run the upgrade program with a Dopod shipping version (so that it matches CID you currently have)?.
As a last resort you can try to perform the upgrade from miniSD card, refer to instructions elsewhere on this forum.
Technically as long as IPL and SPL are ok (which seems to be the case since you get to bootloader screen), it should be possible to flash one ROM or another one.
Good luck!
Ok, some additional information.
I've tried the english HTC ROM available on the xda-ftp but it complains about the vendor ID. Mtty.exe says that my ID is 'HTC__G09' and G09 probably refers to a swedish company in some way.
I threw away 20£ on an unlock that couldn't be run without active sync. This could be read in the instructions, but I kind of gave it a shot, beeing a poor student and all. :/ Oh God I'm stupid....
Now some additional questions...
Is it possible to get a working ROM from a similar device with the same vendor?
Is it possible that there is a file ready to send to me somewhere in the galaxy? Who should I ask to prevent myself from getting the "send it to us"-answer?
Try to update the ROM with matching CID of yr handset.Check Wiki reg this.After update if it stucks on the same screen then type "set 14 0" (without commas) in mtty utility.
Ok... Tried the miniSD-way but it didn't work. ("not allow" was the answer from my display) My CID differs from all in the list so it's really no surprise. The CID seems to be the key here.
My Dopod D810 (trinity) goes logo screen and stops running after an upgrade failure. I can run bootloader 1.07.0000 I also hope someone can upload an original ROM for my salvage.
hdubli said:
Try to update the ROM with matching CID of yr handset.Check Wiki reg this.After update if it stucks on the same screen then type "set 14 0" (without commas) in mtty utility.
Click to expand...
Click to collapse
pter said:
Ok... Tried the miniSD-way but it didn't work. ("not allow" was the answer from my display) My CID differs from all in the list so it's really no surprise. The CID seems to be the key here.
Click to expand...
Click to collapse
You may want to check out this thread:
http://forum.xda-developers.com/showthread.php?t=294046
If you create a .nbh with the CID as you device shows it, it might accept a cooked ROM with matching CID. If IPL/SPL gets damaged, though, it will get worse.
Was updating my dads SPV M700 to WM6 and have hit a problem ....
The rom image updated ok, and I used AX3L's 2.0.8.
Unfortunately during the GSM update the software crashed, and froze at 51%. I had to re-boot and now I can't use the phone.
When I re-set the phone it says No GSM at the HTC screen and then stops loading at the WM6 front page.
I can get into the Bootloader by pressing the Power/Camera/Reset buttons, but when I try to re-flash GSM is says error 270, corrupt image. I have tried several files with no luck.
I would appreciate a hand ..... My dad is going to kill me
Thanks
gaz_az
try press
power button + camera + reset
to enter usb mode
then reflash the radio again.
hope this works
You can try 2 other things!
Download the Radio ROM again- you may have had a downlaod glitch in the 1st one. V1.38 is the best one to try.
Download and install the offical HTC WM5 ROM- this should be a full ROM including Radio, so sometimes completes more effectively. If you are brave, you can them retry the WM6 flash!
since bricking a hermes i stopped taking chances doing rom upgrades via usb..
the method that is most reliable ad safe is... via SD card
extract RUU_signed file from the upgrade pack (use winrar) and then copy it to the root of a blank sd (mini or micro etc) and rename to TRINIMG.nbh ..enter bootloader and follow the steps.. its fast and most reliable
Ok - Thanks for the help, but no luck so far. I have tried the suggestions above !
Heres what I have done ...
Hard reset - no change
Tried to re-flash with WM6 and WM5 cooked roms, but an error comes up saying the images are corrupt. This happens with any image I try.
I have also tried a legit HTC WM5 rom upgrade image, but it doesn't work either. It gives an error at 1% saying invalid device ID.
What I can do it get into the standard bootloader screen, which shows I have a USB connection when plugged in. If I allow the phone to boot up it stops at the WM6.0 picture. It won't go far enough to allow me to get an activesync connection.
ANy more adivice would be greatly appreciated !
gaz_az
Next thing then, is to try and obtain a downloaded Orange M700 ROM- there are a few links hereabouts.
For some reason, your device seems to want only its home ROM. If that fails there are other methods before sending back to Orange!
I downloaded an Orange rom, but still no luck. It gets to 1% again, then says there is a error/corrupt image file. Same as any of other cooked images !
What next ??
well if you were my son, i would advice you,to buy a plane ticket for somewhere very far,leave the house while i sleep,and pray every day you have left in your life,for not find you on my way
uhm, question about boot loader and flash on boot loader mode.
I copy file TRINIMG.nbh to root card mini SD, and i can't go as you say...
always Tri colors screen....
gaz_az said:
I downloaded an Orange rom, but still no luck. It gets to 1% again, then says there is a error/corrupt image file. Same as any of other cooked images !
What next ??
Click to expand...
Click to collapse
You are running out of options
Your choices now are to go further down the 'fiddling' route, or give up and return the phone to Orange for repair. At least if its is stuck in bootloader, they may not spot that you have been meddling
If you want to play more, there are very few Trinity specific fixes, but possibly some of the questions/answers in the Hermes WiKi may help, though the Bootloader versions etc won't be relevant.
[Edit: When you are in Bootloader mode, what version numbers are showing on the screen?]
is it so wrong i was smiling when i read this.
does make me wonder if u told ur dad what u were going to do or whether u were trying to be cocky by giving him a better phone without him knowing.
all i can say is, UNLUCKY !
I must say things are looking bad - I think it would take an original orange SPV rom if I could get one. Been to the orange website, but no luck !! Anyone know if orange released one ??
Been looking at the Hermes unbrick thread. Is there a way to enter KITL debug mode in the trinity ??
G
P.S. Dad knew I was upgrading the phone, already did it once for him and it went ok. No sure he knew I could acutually kill it
No Orange haven't released an official rom.
Well Orange UK haven't Orange FR have, so unless he speaks and reads french that's not an option.
Well, French or not, you've probably got nothing to lose by trying to load the official French ROM
Go Here and click the Mise-a-jour link (which is French for ROM) and it will open a zip file download without the need to verify the IMEI number.
If that doesn't work, nothing will! If it does load, you will at least have a working phone, even if it is in French, and you can go back over the ROM update again, remembering to apply the SPL Bootloader first!
Still "not allow", i don't know what the hell Orange was doing with P3600?
Lock everything?........it's suck !!!
No luck with the French ROM. Same thing gives an error message about wrong device ID.
I am one step from chucking it in the bin. Any more last minute ideas ??
erh, bizzard,i can't use "wtty.exe" to view my CID ...
i tape "info 2"and it always appear
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
...............................
Someone have issue for that?
If i can view CID code,i think i can find the right ROM to re-vivre...all suck !!!
erh, hey guy, your boot loader is english or french? sorry if it's the most stupid question of the day......i think french device use french boot loader,right?
i mean, when screen tri-color appear, use mini SD card to flash ROM, the language it apprear itself is english or french.
p/s : i was telephone to the HTC center, and they say as usual, send it to the center repair.
For french user address is : be sure u have enough garanty which required.
send them and make them crazy.....
CIRMA ELECTRONIQUE
9A14 CHEMIN DE BARATEAU
ZONE INDUSTRIEL DE LA LANDE
33451 SAINT Loubès
If you can figure out how to compile splxploit, you can fix this, see
http://forum.xda-developers.com/showthread.php?t=308691
thank anyway,i will try it before tomorrow,cause i will send them my device for repair.
Hi!
I am having problems with my trinity and I need to send it to customer support, so I loaded SSPL and flashed back the original ROM as described here.
The problem is now, that at startup, red numbers still appear as shown in the attached picture. I am pretty sure that these numbers were not there before I upgraded to HardSPL and WM6 (bepe WM6 ger 0.79). When I enter the boodlader manually, it says "SSPL". What went wrong? How can I get rid of these numbers and return original device state?
PS: The reason why I need so send my trinity back to HTC is, that the device often crashes at startup or during runtime and the screen freezes with some graphical errors, which can also be seen on the attached image.
i think that numbers appear in the original bootloader, i remember that...
Hmm, I thought the numbers first appeared after switching to Hard-SPL, but maybe I am wrong. Can anymode else remember the initial state, or has anymode send his device to HTC with the numbers shown at startup?
staubsaug said:
Hi!
I am having problems with my trinity and I need to send it to customer support, so I loaded SSPL and flashed back the original ROM as described here.
The problem is now, that at startup, red numbers still appear as shown in the attached picture. I am pretty sure that these numbers were not there before I upgraded to HardSPL and WM6 (bepe WM6 ger 0.79). When I enter the boodlader manually, it says "SSPL". What went wrong? How can I get rid of these numbers and return original device state?
PS: The reason why I need so send my trinity back to HTC is, that the device often crashes at startup or during runtime and the screen freezes with some graphical errors, which can also be seen on the attached image.
Click to expand...
Click to collapse
What numbers do you see, if you step manually to bootloader?
fktsndr said:
What numbers do you see, if you step manually to bootloader?
Click to expand...
Click to collapse
TRIN100
IPL-0.50
TRIN100
SPL-1-07.0000
agreed
Flashed the same bepe version and it shows up same screens - trying to switch to another ROM (pref. the LIT), for too many drop out issues with the german bepe 0.79 (esp. with TT6 and Dialer) but cannot even get it to run the vodafone WM5 again - due to a broken cable, as I realize now - ok, we´ll see how far the LIT will LEAD
I have an original device with WM5, not yet upgraded, and I have the same red numbers.
staubsaug said:
TRIN100
IPL-0.50
TRIN100
SPL-1-07.0000
Click to expand...
Click to collapse
Everything is ok, this is the original HTC ipl and spl!
okay, thanks! I am going so send my trinity back to htc then.
Hey!
I'm going to give my P3600 back to the support service to have it fixed (as usual the black paint is peeling out very quickly from the bottom and the side). My phone is unbranded and I can't find the original ROM I downloaded from the HTC web site.
Do you know where I can find the original italian ROM for HTC p3600?
Anybody have it?
Thanx.
Everything went well and I received a brand new trinity today.
gepino77 said:
Hey!
I'm going to give my P3600 back to the support service to have it fixed (as usual the black paint is peeling out very quickly from the bottom and the side). My phone is unbranded and I can't find the original ROM I downloaded from the HTC web site.
Do you know where I can find the original italian ROM for HTC p3600?
Anybody have it?
Thanx.
Click to expand...
Click to collapse
beware : read the wiki could be helpfull for your knowledge...
staubsaug said:
Everything went well and I received a brand new trinity today.
Click to expand...
Click to collapse
Good ....
I just got a att tilt.. I have tryed to unlock it using the kaiser sim unlocker. At first it would just go to the load screen and it would say 0%... a white screen. so i looked for a posting with that. And i found this ------HardSPL will not install - WHITE SCREEN: SOLVED (UPDATE 01. March 2008)-----
on that i got all the way up to 95% and then I got a err message.. now all it will do is go to the load screen (white) and show 0% and then I follow the instructions.. and when I go to restart the phone it show the red,green,blue,white screen.. top left show
kais1*0
spl-1.56.0000
cpld-8
top right show
ruunbh
what happen please help.. this is the first time this ever do this to me.. i have ren unlocked programs from hear befor with np..
bikepilot said:
I just got a att tilt.. I have tryed to unlock it using the kaiser sim unlocker. At first it would just go to the load screen and it would say 0%... a white screen. so i looked for a posting with that. And i found this ------HardSPL will not install - WHITE SCREEN: SOLVED (UPDATE 01. March 2008)-----
on that i got all the way up to 95% and then I got a err message.. now all it will do is go to the load screen (white) and show 0% and then I follow the instructions.. and when I go to restart the phone it show the red,green,blue,white screen.. top left show
kais1*0
spl-1.56.0000
cpld-8
top right show
ruunbh
what happen please help.. this is the first time this ever do this to me.. i have ren unlocked programs from hear befor with np..
Click to expand...
Click to collapse
It shows you are using the 1.56 SPL, which is the Stock AT&T SPL.
Download the official AT&T 6.0 Shipped Rom here:
http://rapidshare.com/files/55298724/RUU_Kaiser_CINGULAR_WWE_.exe
Take out your SD card and flash this ROM. After you have a successful flash and your phone boots up normally, post back and we'll go from there.
bengalih said:
It shows you are using the 1.56 SPL, which is the Stock AT&T SPL.
Download the official AT&T 6.0 Shipped Rom here:
http://rapidshare.com/files/55298724/RUU_Kaiser_CINGULAR_WWE_.exe
Take out your SD card and flash this ROM. After you have a successful flash and your phone boots up normally, post back and we'll go from there.
Click to expand...
Click to collapse
Ok I tried that it go to 1% and then it go to say
ERROR[294] : INVALID VENDER ID
this update untility cannot be used for you pda phone pleas check you Update utility
bikepilot said:
Ok I tried that it go to 1% and then it go to say
ERROR[294] : INVALID VENDER ID
this update untility cannot be used for you pda phone pleas check you Update utility
Click to expand...
Click to collapse
You could try this
More specifically, might want to read this whole thread and search it for RUUNBH.
MTTY should be able to help as long as you use the proper commands.
bengalih said:
You could try this
More specifically, might want to read this whole thread and search it for RUUNBH.
MTTY should be able to help as long as you use the proper commands.
Click to expand...
Click to collapse
Ok got it back to all origanal...now every time i take the battery it go back to the colar screen ( now what
Hello. I'm new in here. half hour ago I got registered. so i have a problem with my HTC. For about 1-2 weeks now the device was restarting. 2 days ago the device never opened again. yesterday I tried the hard reset sequence and the device open to the message that i will lose everything and if i agree to press send but when i press it i get a green screen and nothing more. what can i do? what might be the problem? I uploaded also a video (but I can't post it cause I am a new user so ask me to send it as a pm) and a photo of the green screen.
thank you very much.
By all means, if you don't mind losing data that you had on the ROM memory, then hardreset.
Hard resetting I think is the best possible solution for you.
So press that green phone button when it tells you to ^>^
I already did a hard reset. that's why i have that green screen. I did a hard reset about 4-5 times now. thanks for your answer.
Ah, I see.
Try this:
Soft reset your phone while holding the camera button.
Does this get you to a screen where it's Red/Blue/Green/White Screen?
If it does, try plugging in a USB cord. If you get this far and see the word 'USB' in the lower left hand corner, then I think we can continue on.
I did it and it shows usb. what next?
Awesome, I'm glad.
Next, Download and run the .exe:
http://rapidshare.com/#!download|16..._4.17.405.2_4.1.13.44_02.94.90_Ship.exe|56629
After this, all should be well.
Now if you want to flash custom ROMs like the ones that I make, just follow the directions on any one of my ROM threads from Top to Bottom ^>^
before i continue. after the installation i will have the OS back? I will have to install it again? i had WM6. thank you very very much for all the help.
error 300: INVALID UPDATE TOOL.
THIS UPDATE UTILLITY CANNOT BE USED FOR YOUR PDA PHONE. PLEASE GET NEWER UPDATE UTILITY.
that's the message i got.
Hmm, okay, try searching mediafire for the user aizend1985 and look for an .exe entiled Wing something or another.. I'm out right now, so cant get the link for you.
Download and run.
i can't find the user. i'll try again. when you have the time please send me. again thankl you very much. have a great time.
Here you go mate, try this:
http://download1152.mediafire.com/he785npun6pg/yj1oz2m3mzm/TMo_Wing_RUU_Update_4.26.531.4.exe
If this doesn't work I'll try to do some research for you and see what we can do.
Error 244: Invalid model id.
Okay. The last thing you can do is to try the dutch vodaphone herald version:
http://rapidshare.com/#!download|18..._4.21.172.1_4.1.13.44_02.94.90_Ship.rar|52629
Download and run the .exe from the Red/Blue/Green/White screen.
If this loads onto your device, then what we do is we HardSPL next.
*crosses my fingers for ya*
If this doesn't work, then have HTC try to repair it. Because I don't think there is anything else to do for it :1
:'( Error 244: Invalid model id.
thank you very much for everything. at least I know that it can be fixed.
you reflashed your phone in some custom roms?
but it didnt work still and you tried the hard spl too.... can you tell me the history of your phone before it went like that, i am a technician and might help you on your problem.... what was the last thing you did on your phone? i will wait for your reply if it's ok....
dear [email protected]
I have the HTC P-4350 for the last 5 years. the last 1-2 weeks the phone started to freeze and the screen went white slowly and then restart. after the 2 weeks the phone closed and didn't open again but the hard reset is working until the part that said format done (or something like that) and then i get a green screen (see the photo I have attached here). after that i made this post and the friend Tribulattifather (member of the site here) helped me with some info and gave me some files to try and install but the first file gave me this message
"error 300: INVALID UPDATE TOOL.
THIS UPDATE UTILLITY CANNOT BE USED FOR YOUR PDA PHONE. PLEASE GET NEWER UPDATE UTILITY."
and the other gave me
"Error 244: Invalid model id.".
there isn't something else. any idea?
thank you.
what is your spl number and ipl....
did you do the HARDSPL on your phone????
do the hardspl first and then flash your phone using a micro sd....
tell me if you already did that.... i will wait for your reply....
i also want to know if you dropped it or something before it went like that.... plz tell me the whole history of your phone....
to my perspective, the phone's problem can be resolve in flashing....
tell me if you hardspl it,,,, because you cant flash it on some ROMS if it's not HARDSPLed...
hi [email protected] i had a problem with my internet that's way I answer now after all that time. I droped it a couple of times by accident but that is a long time ago. the IPL is 4.17.0001 ans SPL 4.17.0000. i never did anything like hardspl. i changed the flex cable 5 months ago. when i first got the phone 5 years ago it had WM5 and after 5 months when i bought it I got WM6 at service. i never got the phone to service cause never anything happen. i can't remember anything else know.
I have an update for my device. now it doesn't open with anything. i mean i can open it to hard reset or to see the spl. it doesn't respont to anything.
May be time to put the phone to rest, mate u.u
I'll play the taps..