Hi guys I've been searching for an answer on how to flash a modem specifically the bujp5 on my phone
Should I just use Odin? If yes with or without pit? With repartition? Should I use cwm is that possible?
Cheers
Sent from my GT-I9000 using XDA App
Look in docs thread 1st page for link to modems to flash with cwm or you can use zimage and flash with odin no pit no repartition.
I flashed the JS8 single file with 512pit and repartition. (from samfirmwares)
This bricked my phone.
I flashed JS8 single file with 803pit and repartition.
Still bricked.
I flashed my phone with a different JS8 (3 files, PDA, MODEM and CSC, no bootloader) and 512pit and repartition.
My phone is fixed.
The single file JS8 w/ 512pit + repartition bricked it.
The multi file JS8 w/ 512pit + repartition fixed it.
Why?
Thanks
When flashing with one file do not use pit file or tick re partition..
There is a tut on xda general section!
Sent from my GT-I9000 using XDA App
Thanks very much! At least I know now in future, I couldn't understand why it worked with one and not the other
When flashing with one file do not use pit file or tick re partition.
I have done just that multiple times .
base eclair 512 pit and repartition checked to clear a faulty rom install .
Samfirmware single file on PDA .
I do it that way as it works when i is breaked everything once again .
jje
Hi...
Can i flash back from 2.3.3 stock rom to 2.2.1? any links?
thanks.
Sent from my GT-I9000 using XDA App
I found this http://www.darkyrom.com/community/index.php?threads/cm7-darky-9-5.1840/
U need to flash rom with odin i just dont know if "re-partition" need to be ticked and pit 512 chosen? can somone tell? also phone efs clear need to be ticked?
if I'd wanna do it, directly, i flash my phone from the top... in fact, i've had to do it some times...
Yes you can, I already did too.
Flash the phone directly with Odin:
http://www.faq4mobiles.de/forum/downloads.php?do=file&id=9026
and choose one of this firmware:
http://www.samfirmware.com/fwandroid.htm
You need be register there to download and after you find all official firmware and how you flash too.
Ok.. Thanks guys... Will try it on weekday and post the result ...
Sent from my GT-I9000 using XDA App
xporter said:
Yes you can, I already did too.
Flash the phone directly with Odin:
http://www.faq4mobiles.de/forum/downloads.php?do=file&id=9026
and choose one of this firmware:
http://www.samfirmware.com/fwandroid.htm
You need be register there to download and after you find all official firmware and how you flash too.
Click to expand...
Click to collapse
U put pit in odin ? also check re-partition?
Hi all. I need to send my tab in for repairs and I tried following the other guides in the forum so I could return to stock but I haven't been successful.
What I did to return to stock: 1. Used Odin to flash DXK (my region) firmware which came from samfirmware.com 2. After the flash completed successfully (flashed with .pit and the rom itself) it reboots and just perpetually gets stuck in the Samsung boot logo. What did I do wrong and how can I get it to boot to stock?
Help would be really appreciated. Thanks!
EDIT: SOLUTION
Okay. It's confirmed. A fix for all your CSC and partition problems.
1. Go to noxxious' post # 53 http://forum.xda-developers.com/showpost.php?p=14160362&postcount=53
2. Follow instructions to the letter by flashing P1000DXJK2 - Full (Use Odin process not Heim)
3. Connect to Kies. Kies will notify you that there is an update, use that to upgrade to Gingerbread officially.
4. After the upgrade, it will have no partition problem and it will display properly XTC as your CSC on Kies. It's like a brand new non modified tab!
im in the same bout as you mate did just the same thing was working fine on voodoo lagfix wanted stock back flashed now stuck at samsung logo
All i can say is check to see if you still have the recovery mode in your tab by holding up volume and power button the let go of power and keep holdig up volume when you see it boot to samsung logo
If you have lost your recovery mode your stuffed your bootloader is locked and theres nothing you can do to bring it back its time for samsung service to sort it out
Can you still put your tab in Download mode?
If so, you can try to reflash DXK.
1. Use the p1.pit file for PIT and DXK for PDA.
2. Select re-partition on.
3. Maybe this time after the tab reboot and the odin pass you'll be stuck at the recovery mode, error will be E : Cannot mount dbdata. . .
4. To be out of this you could select format/restore, navigate using volume up/down then press home button to select that option.
5. Then go back to menu and select reboot.
-- inform me if this works.
Edited my first post :
Yeah, you're totally screwed with a protected bootloader!
I just downloaded the P1000DXKM2 @Samfirmware and discovered that it contains sbl.bin, boot.bin, and the zImage file size is 7860 Kb.
See this forum http://forum.xda-developers.com/showthread.php?t=888071
Sent from my GT-P1000 using XDA Premium App
Will try this and report back. Thanks!
Sent from my GT-P1000 using XDA Premium App
Followed your instructions but it's stuck on the Samsung logo.
Sorry, did u follow my first post?
After i download DXKM2 in samfirmware i discovered that it contains new bootloader, containing zImage more than 4,000-5,000Kb.
-- in short flashing that with repartition will have the same result as your first attemp.
This time will you try to flash Roto's JMEv4_full safe rom. Same steps as my first post.
Sent from my GT-P1000 using XDA Premium App
I flash roto's when I want to restore my tab and put a custom rom. What I need to find out is how to put a DX rom into it so I can send it to a service center.
Sent from my GT-P1000 using XDA Premium App
i encountered something similar to this before when i was testing out the 2.2.1 HK rom. i also made the mistake of flashing protected bootloaders onto my tab, though i reverted it back to unprotected bootloaders using Chainfire's and RotoHammer's bootloader patcher http://forum.xda-developers.com/showthread.php?t=888071.
as for my stock firmware then, mine was P1000DXJK2. what i did was dl the P1000DXJK2 from samfirmware. I then removed boot.bin and sbl.bin from the tar package (i patched the unprotected bootloaders onto my tab), and added a dbdata.rfs into the tar package. i then flashed using odin (flashed with no pit). and i got it back up and running.
my P1000DXJK2.tar file contains the following:
cache.rfs
dbdata.rfs
factoryfs.rfs
hidden.rfs
modem.rfs
param.lfs
zImage
noxxious said:
i encountered something similar to this before when i was testing out the 2.2.1 HK rom. i also made the mistake of flashing protected bootloaders onto my tab, though i reverted it back to unprotected bootloaders using Chainfire's and RotoHammer's bootloader patcher http://forum.xda-developers.com/showthread.php?t=888071.
as for my stock firmware then, mine was P1000DXJK2. what i did was dl the P1000DXJK2 from samfirmware. I then removed boot.bin and sbl.bin from the tar package (i patched the unprotected bootloaders onto my tab), and added a dbdata.rfs into the tar package. i then flashed using odin (flashed with no pit). and i got it back up and running.
my P1000DXJK2.tar file contains the following:
cache.rfs
dbdata.rfs
factoryfs.rfs
hidden.rfs
modem.rfs
param.lfs
zImage
Click to expand...
Click to collapse
So Samsung won't notice that I have unlocked bootloaders when I send the tab to them? Where do I get a dbdata from?
Sent from my GT-P1000 using XDA Premium App
nope. they won't notice. but if you want it to have signed bootloaders, you could just add the dbdata.rfs to the TAR package.
i have attached the dbdata.rfs that i used. got it form GT-P1000-CSC-MULTI-OXXJK2.
noxxious said:
nope. they won't notice. but if you want it to have signed bootloaders, you could just add the dbdata.rfs to the TAR package.
i have attached the dbdata.rfs that i used. got it form GT-P1000-CSC-MULTI-OXXJK2.
Click to expand...
Click to collapse
Thanks for this. So you mean the reason why the rom won't boot after flashing because it lacks this file? What does it do exactly?
Sent from my GT-P1000 using XDA Premium App
i actually don't know.
but from my experience this solved my flashing problem when i tried to roll back to stock firmware.
when using heimdall it is listed with cache.rfs under CSC
May i ask why you are sending your tab to samsung for repair?
noxxious said:
i actually don't know.
but from my experience this solved my flashing problem when i tried to roll back to stock firmware.
when using heimdall it is listed with cache.rfs under CSC
Click to expand...
Click to collapse
I placed dbdata.rfs into the exact same rom that you used and it fails at dbdata.rfs flash. Odd.
That's weird. You extracted the dbdata.rfs from my zip right?
Sent from my GT-P1000 using Tapatalk
noxxious said:
That's weird. You extracted the dbdata.rfs from my zip right?
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Yes, I did. Then I stuffed it into the .tar.
If it's not too much of a bother maybe you could upload the working .tar that you used?
Sent from my GT-P1000 using XDA Premium App
ok. im currently uploading the tar i used. i removed boot.bin and sbl.bin from the tar and dbdata.rfs added.
noxxious said:
ok. im currently uploading the tar i used. i removed boot.bin and sbl.bin from the tar and dbdata.rfs added.
Click to expand...
Click to collapse
Thanks a lot dude!
Sent from my GT-P1000 using XDA Premium App
DL Link added.
P1000DXJK2
Flash with no .pit
btw, what's the prob with your tab that you are gonna return it for warranty?
noxxious said:
DL Link added.
P1000DXJK2
Flash with no .pit
btw, what's the prob with your tab that you are gonna return it for warranty?
Click to expand...
Click to collapse
Thanks! Will try it now.
Sent from my GT-P1000 using XDA Premium App
Dears.
i need to know how to flash a new stock ROM that consist only from single file.
i used to flash my phone many times successfully using ODIN with the common 3 files avaliable (PDA, Modem & CSC + Latona)
i have downloaded a new firmware (I9003JPKE1_OJPKC2_JXKA4)
when you extract this file, you can not find the files mentioned earliar (PDA, Modem & CSC )
the result of the extracting is (I9003JPKE1_JXKA4_OJPKC2_HOME.tar)
so how to flash single file???
thanks
Just flash it as pda. No other file its required.
Sent from my GT-I9003 using XDA Premium App
thanks for your replay
but the name of the file specify 3 names for 3 files.
so is it sure that PDA , Phone & CSC can be flashed as one file??
sorry for asking a confirmation.
Is the new arabic firm right? Flash it on pda like said..nor pit file nor re partition required
Sent from my GT-I9003 using Tapatalk
yes i had the same thing, but the first time i flashed it loading the pit file too
i dont know was that right or wrong :S
okay.. iw was a wrong thing to do and my phone was stuck at the samsung flashing srceen, i then flashed the gingerbread back and it worked well.. but i want to know how to flash froyo arabic since gingerbread doesnt support arabic yet .. any help appreciated
Single-file-flashing: just put into PDA. But don't use Re-Partition or PIT-file!!
You need a Froyo-ROM with bootloader cause you have Ginger running now.There should be three parts (CSC,PDA and Phone).You'll get it on samfirmware.com.
And wrong section, this thread should be in i9003-section...
Sent from my GT-I9000 using XDA Premium App