I just bricked my I9000
my I9000 had the 3B problem and last day i decided to unlock it.so i connect it to my PC and use odin to flash "Aries_P-SBL.tar.md5".everything went right before i click the "start"
but when i clicked "start",it began flashing and stucked at "downloading SBL.ini",it was strange because it can download BOOT.ini normally.so i had to disconnect and when i power on i saw phone-!-PC.
i tried connect 301K resister between microUSB's 4 and 5th pin and it worked well,the phone succeed into the DLM.
BUT...it still cant flash the second file "SBL.ini" into the phone,it just stucked!
then i tried to flash a ROM into the phone and obviously,it stucked at the second file,i forget what the file was.
when the last time try to unlock my phone,i didnt select "bootloader update",
SO.....now i have a perfect brick,with no response,no logo ,no phone-!-PC,just a BRICK
what i wanna know is:why my phone always stucks at flashing the 2ND file.
CAN ANYBODY LET ME KNOW THAT???
THX...
Related
I was trying to flash a GPS fix, this one..
http://forum.xda-developers.com/showpost.php?p=10389365&postcount=18622
I forgot to read the instructions and went ahead and flashed it through CWM, now its stuck at the Samsung logo screen and I cant get into recovery, it just loops, I can get into download mode, but I`ve never used it, some help.....please
mloc33 said:
I was trying to flash a GPS fix, this one..
http://forum.xda-developers.com/showpost.php?p=10389365&postcount=18622
I forgot to read the instructions and went ahead and flashed it through CWM, now its stuck at the Samsung logo screen and I cant get into recovery, it just loops, I can get into download mode, but I`ve never used it, some help.....please
Click to expand...
Click to collapse
This procedure will get you back to stock JPU ROM via Odin and Download Mode.
http://forum.xda-developers.com/showpost.php?p=10449932&postcount=7
Then once your phone is working again you can go ahead and flash to a custom ROM which I'm guessing you know how to do. Let me know!
Ok dude I`m doing it now, fingers kriss crossed!!!
Ok this happened....
I took usb out, restarted pc, then phone went into recovery mode, I did a factory/data wipe, same with cache, was about to restart phone, now there`s a white box with an orange arrow comming out of it and a little green android man?
I pressed menu button, it brought up recovery, I restarted, went passed the white logo screen to swirling S logo screen, also played music, now at black screen....
Still in black screen but every 20 or so seconds it vibrates once then 3 quick times???
After sometimes it is required to do a factory reset to get it working.If your flash was succesfull try to factory reset it in recovery mode.
Tried Odin again and got the same error, so when I get into recovery mode I should factory reset everything?
Tried to get back into recovery from download mode and got the bricked screen!!! Its hopeless now is`nt it
I can still get into download mode.....
I dont really get what you are trying to do.
Can you get in recovery mode and do a factory reset???
I was in recovery and did that and it got to the swirling S logo screen then screen went black, vibrated once then 3 short ones every 30 or so seconds and thats it, it did`nt go any further.....
I keep getting a FAIL when I try to flash using Odin
I notice when I`m putting in the info in to PDA PHONE CSC areas, I dont see where I`m supposed to use this..
MODEM_I9000XXJPU.tar.md5
I followed it all step by step, or i dont see it in the steps
Hmm i had that screen many times but always able to flash with Odin.Are you sure you got the drivers on your pc?Make sure that you havent Kies running,on try or in backround,or any other program that is used to connect your phone.Also its always good to use a free USB port on your pc,and by saying free i also mean that it not one of the front panel USB cuz those ones sometimes are shared.
Start at the beginning .
Available
Download mode yes or no
Recovery mode yes or no
PC sees phone Odin first box is yellow yes or no
jje
mloc33 said:
I was in recovery and did that and it got to the swirling S logo screen then screen went black, vibrated once then 3 short ones every 30 or so seconds and thats it, it did`nt go any further.....
I keep getting a FAIL when I try to flash using Odin
I notice when I`m putting in the info in to PDA PHONE CSC areas, I dont see where I`m supposed to use this..
MODEM_I9000XXJPU.tar.md5
I followed it all step by step, or i dont see it in the steps
Click to expand...
Click to collapse
Modem = phone
gtg2 said:
Modem = phone
Click to expand...
Click to collapse
Still though,he should be able to flash even without modem file...
I m wondering if he clicked repartition or not.My guess is he didnt,so its stuck untill he does repartion.
JJEgan said:
Start at the beginning .
Available
Download mode yes or no
Recovery mode yes or no
PC sees phone Odin first box is yellow yes or no
jje
Click to expand...
Click to collapse
Yes
No
Yes
tackygr said:
Still though,he should be able to flash even without modem file...
I m wondering if he clicked repartition or not.My guess is he didnt,so its stuck untill he does repartion.
Click to expand...
Click to collapse
Repartition was checked, should I put the modem one in the phone section?
2. Open Odin AS the Man said .
Download here: http://db.tt/QuA1G6s
That is a sure working Odin. The one I use. Extract that and run Odin3 v1.3.exe
3. In Odin:
check Re-Partition
Click PIT and select s1_odin_20100512.pit
Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Do not touch any of the other options. Leave them the way they are.
3. Exit Kies (make sure it is not running AT ALL).
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
5. Click START in Odin... if Odin gets stuck for a LONG time (progress bar isn't moving at all in both phone and Odin).. unplug phone, pull battery, restart computer and repeat from step 2.
6. Once Odin says it succeeded wait for phone to reboot.
I`m still getting a FAIL on it.
I download that Odin, reinstalled the Samsung drivers and disabled anything related to the phone.
I tried it even without the sim car and sd card in cause I read one post that had tried it and it worked.
From the instructions it looks like I`m using 3 of the 4 files download, remember that modem one.
I definitely have to use that same file twice for PDA and phone?
I followed these instructions to the letter...
file:///C:/Users/Colm/Desktop/xda-developers%20-%20View%20Single%20Post%20-%20[Q]%20i9000%20can%20not%20boot.htm
I`m not sure which one is the right Odin to use, but I tried the both of them and still the same results.
There both v1.30, the gt-p1000 is the one from the previous post..
I`m even trying different USB ports...
Ya fuppin BEAUTY, I did it, I put into the phone section in Odin that modem file and here`s what I got...
NoW I have fireware 2.2.1
Baseband jpu
Kernel 2.6.32.9
[email protected] #1
Build
Froyo.xxjpu
Is this the new froyo?
Will I be able to go back to Darky`s 8.0?
Would this also mean I`ve 3E instead of 2E?
Is this the new froyo?
Says Froyo
Will I be able to go back to Darky`s 8.0?
On your own head be it all i have done for a week is answer borked post all using this rom .
Would this also mean I`ve 3E instead of 2E?
Probably flash via Odin you will need to search i dont have a link .
CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
Its probably on Darkys front page as is Clockwork .
Install sd card update zip CWM twice to get to 2e .
jje
Ok first of all I want to thank the 2 of ya`s for all your help, I really appreciate it!!!
Now that I`m up and going for some reason my pc does`nt see my phone even tough it says I`m connected on my phone?
I restarted my pc, reconnected phone nothing...
If its not one problem its another...
i was trying to get back from ics to jvu i started odni did every thing right but nothing happend stucked alot on the step setup connection then i unpluged the device and tryed to open but has gave me th phone to triangle icon what can i do now help plzzz fast
donmedo said:
i was trying to get back from ics to jvu i started odni did every thing right but nothing happend stucked alot on the step setup connection then i unpluged the device and tryed to open but has gave me th phone to triangle icon what can i do now help plzzz fast
Click to expand...
Click to collapse
Pull battery, replace, boot into d/l mode, and Reflash, making sure the firmware you are using has a pit file
listen brother, you need to flash a three parts official rom via odin with re-partition checked that's if you can get into download mode but if you cant you have to use a jig to get you into download mode and if it cant either then tell me to give you another method .... by the way I'm Arabian too
Here's my recovery kit, unzip , read the .txt
http://db.tt/MOGZx01S
My device stop in a bootloader. I've tryed to flash with a odin(1.85, 3.07). And nothing. It is don't go to download mode.Only with a jig. The normal mode don't works. When a plug the micro usb, appear in the lcd a incomplete freeze circle. But, one time, the cell starts and works well. I don't know what is happen...
have a read here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
Tanks!!
slow--welder59 said:
have a read here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
Click to expand...
Click to collapse
I'll see :laugh:
My device
i didn't solve the problem with the fix that say to me. I found in in forum, it is probable a oxidation. I'll try to fix. Anyone have a same problem?
My device is Brick
I didn't find a solution for my device. Please, help me!
What rom were you trying to flash and what exactly do you see on boot up? Some roms disable the three button combination.
My device is Brick
slow--welder59 said:
What rom were you trying to flash and what exactly do you see on boot up? Some roms disable the three button combination.
Click to expand...
Click to collapse
I try to flash some roms, the last one is the brazilian rom (zto 2.3.3). The cell phone stuck ins boot up ( where apears samsung galaxy s i9000b). I left for hours and nothing. The three button combination works perfect, but don't enter in recovery mod. Only one time, the cell starts, and works perfect, but when i reboot, stuck in a logo... I don't know whats happen with my cell phone...
Try this
First
Connect in download mode
Open ODIN
Re-Partition CHECKED
PIT: s1_odin_20100512.pit
PDA: I9000B_JH4_JI3_JH2_JH4_VJ_ARO.tar
Start
on finish Close ODIN and disconnect the phone
Power Off
Second
Connect in download mode
Open ODIN
Re-Partition UNCHECKED
PDA: I9000B-JV3_2_3_3_ARO.tar
on finish Close ODIN
andrewmilli said:
I try to flash some roms, the last one is the brazilian rom (zto 2.3.3). The cell phone stuck ins boot up ( where apears samsung galaxy s i9000b). I left for hours and nothing. The three button combination works perfect, but don't enter in recovery mod. Only one time, the cell starts, and works perfect, but when i reboot, stuck in a logo... I don't know whats happen with my cell phone...
Click to expand...
Click to collapse
Hello
I have a mini S3 and went to install CyanogenMod on it but the ODIN stopped in the middle of the installation, causing the Android stay corrupted and whenever I called this message appeared: "firmware upgrade encountered an issue. Please select recovery mode in kies and try again "
So I downloaded the original S3 mini according to my country and everything and I install ROM, well, the installation took place correctly but leave it stuck in boot start screen showing the phone model, then I install the ROM again but the ODIN stopped again and there came the problem ...
it does not turn on the power switch and the only way to 'make it light up the screen' is connecting the USB, but when I plug the cable it gets on and off the screen repeatedly at the "firmware upgrade encountered an issue. Please select recovery mode in kies and try again " until I remove the cable and the phone turns off completely.
I hope you guys understand my problem and can help me please.
Already grateful : )! (sorry my english)
Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu
Can't power on and enter on recovery menu
JanniekM00 said:
Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu
Click to expand...
Click to collapse
I can't do wipe/factory reset in the recovery menu because i can't power on at all. It keeps only blinks (on and off) all the time when its plugged on PC or charger.
Thanks very much for your support!
Did you see the s3 mini logo if you turn on the phone. If you see this works download mode then? if not then your phone is bricked....
When you try and turn the phone on does it display the phone name? Or does nothing happen? If you get nothing then I'm afraid it's bricked. I'd try a different computer, different lead and possibly a different windows os. Then try and flash a stock rom using odin and be 100% sure it's for the model of the phone you have as there's loads of variants of the s3. Other than that, I can't help you any further
Hi everyone,
At first sorry for my english. I`m Dawid from Poland
OK, so i have gt-i8190N and when i trying to turn it on i see only white screen. Screen is ok because i can run phone in download mode.
Of course everyone says " so try to flash rom by odin" but i can`t because in odin i have error "FAIL Get PIT for mapping There is no PIT partition". I was try to flash rom with PIT file (to i8190N and i8190) but without succes.
Are anyone have the same problem?
I was try OneClick also.
Thanks for any answer.
Hello,
I have recently encountered a random shutdown in my Galaxy A5 (A510y) after installing a custom rom (https://forum.xda-developers.com/sa...rience-os-v1-0-updated-02-09-2017-t3666774).I have Used this ROM for about 2 days till the random shutdown, After that i wasn't able to turn my device on also had no access to recovery mode every thing was removed .... OS .. BOOT.. Samsung logo also not showing when i held the power button, And when i plug my usb cable in the phone there is no sign of the battery image.. So i thought to myself my phone is FK*d but i thought about entering download mode which seemed to work .. I continued with the process of installing a new firmware with odin everything passed , but still no OS or Boot Or recovery installed
Can someone please help me as i have no ideas and will take no further step in trying to fix it myself as i will just make things even worst
Thanks much help will be appreciated :good:
JaayTee said:
Hello,
I have recently encountered a random shutdown in my Galaxy A5 (A510y) after installing a custom rom (https://forum.xda-developers.com/sa...rience-os-v1-0-updated-02-09-2017-t3666774).I have Used this ROM for about 2 days till the random shutdown, After that i wasn't able to turn my device on also had no access to recovery mode every thing was removed .... OS .. BOOT.. Samsung logo also not showing when i held the power button, And when i plug my usb cable in the phone there is no sign of the battery image.. So i thought to myself my phone is FK*d but i thought about entering download mode which seemed to work .. I continued with the process of installing a new firmware with odin everything passed , but still no OS or Boot Or recovery installed
Can someone please help me as i have no ideas and will take no further step in trying to fix it myself as i will just make things even worst
Thanks much help will be appreciated :good:
Click to expand...
Click to collapse
Did you, while flashing, thick "re-partition"? If you are, that is reason.
On your place, I will change computer and USB cable and try again.
If nothing helps, then find PIT files for your phone model and flash it with PIT file (re-partition) and stock firmware.
At first I unticked re-partition and ticked Auto reboot and f.reset time , I then flashed the firmware which had no luck, Secondly I flashed with re-partiion Ticked with no luck aswell ! I also unticked all except for Nand erase Still no luck , I flashed my model PIT file with the original firmware same thing NO luck ... So maybe it's an hardware problem , I have attempted to do this on another computer and still no luck with re-partition unticked.
Hmmm... U already try all available options...
Maybe try with older version of Odin, go on SamFirmware site find your model and look at version of Odin...
Otherwise, u make brick