I have a bell galaxy s i9000m and I was using JPO rom for more than a month. I installed lcd density today from the market and after choosing a new screen density restarted my phone. The phone rebooted with the new density but TWlauncher did not start and gave force close erros. I took the battery out and restarted the phone but it kept cycling through the GT 19000m logo and was even unable to get into recovery mode. Then I re flashed to a 2.1rom( JH2) and phone would go past the "S" logo screen with sound and then froze at the black screen.
With any 2.1 firmware flashed I can get into recovery mode but if I try 2.2 (like JPO) it keeps looping the GT19000m logo.
Help that results in a fix will be rewarded
Thanks
Did u flash a lagfix ?
Btw, wrong section and keep ur donation to urself.
Im in the helping mood so come on here
Sorry about the wrong section. Admin can you move it to the right one?
I am on the chat
Flash it with jg8 rom, 512pit, repartition. Then flash with 813pit, and froyo, no repartition.
Sent from my GT-I9000 using XDA App
does not work with this combo
you could try jm1 512 pit + re partition. after install enter recovery wipe cache partition + dalvic cache reboot see if phone will go. if not back into recovery and format internal memory + do factory reset hopefully it boots.
How about:
1) try to get into CWM recovery
2) instal another launcher (adw/launcher pro) via CWM
3) if it works - install lcd density from market and change your density to default level
Related
I am having a problem with my Galaxy S GT-I9000. I bought it from Bell Canada, which means it is a vibrant. And due to the lag and freeze of the Bell's system, i decided to flash my phone to Froyo 2.2. It was really sucessful when I was doing my flash.
Here is some info about the firmware I use:
I used Odin 1.3, PIT: s1_odin_20100513
firmware:
CODE_I9000XXJPC.tar
MODEM_I9000XXJPC.tar
CSC_I9000OXAJPC.tar
I have no idea what version it is, I just followed a guide from Internet, but it said it is a European pack.
Here comes the Problem, the phone is working very vell for the first 10 days, no freeze issue anymore. But suddently one day, the screen went to black( I was not using the phone at that time, and when I started my random check of the phone, the screen turns off).
After I start up the phone again, the loading screen is still there, and there is sound, too. But after the big "S", the screen turns black again.
And when I pressed the home button, the Menu and ESC key turned bright, after this I think the phone is freezed, but I can still hold the Power key for a while to turn off the phone.
I tried to flash my Galaxy with other firmware, but it all show the same problem---
loading screen, startup sound, but the screen turn black after that.
If any of you could help me with this problem I will be really appreciate!!
And by the way, the 3-key combo is still working on my phone.
So I can still enter the recovery mode or the downloading screen...
And I tried everything on the recovery mode screen, factory reset, wipe, formate SD...everything, but no luck
Really need help..!
Try flashing to JM9 using the 512.pit with re-partition and do a factory reset and wipe cache when done: http://forum.xda-developers.com/showthread.php?t=802909
Then try flashing to JPM using 803.pit and tar file as PDA only and no repartition, do a factory reset and wipe cache when done: http://forum.xda-developers.com/showthread.php?t=807886
You used the 513.pit file in your previous flash, I think that it is old and not used any more.
I tried everything u said, step by step, but still not working, dunno why,
and after I flash JM9 with 512, the phone wont go into recovery mode anymore
and there is no loading screen anymore, just a logo of the Galaxy S GT-I9000 Samsung and the phone turns off.
So I decided to ignore this and flash JPM with 803 as you said , and the problem is still there, loading screen and sound, then nothing happen.
I had exactly the same problem and i have done exactly the same steps then i realized someone took out the Sdcard.
Have you check the SDcard. if in there try to format first in other phone or computer.
You fried the internal sd card, I did the same, I'm not covered through samsung or bell cuz I'm unlocked on rogers, I took it to a cell phone repair place, cost me 65 bucks to get a new motherboard, no more flashing roms for me
Sent from my GT-I9000M using XDA App
Try going in to recovery mode and post any errors that appear at the bottom of the recovery screen. it would help us find put what is really wrong with the phone.
find out what firmware bell originally had on your phone rather than JM9.
Sent from my GT-I9000 using the XDA mobile application powered by Tapatalk
if you plug in an external sd card, you will be able to access recovery mode again. i was in the same boat, and it is a corrupted/fried sdcard. i gave up after flashing 30 different roms and sent mine in for repair.
i updated my phone via kies and it got stuck at the galaxy s boot screen...
im able to enter download mode,but even after flashing the phone with the firmware i get an error in recovery saying 'unable to prepare storage, use ui menu for format and reboot'...
what do i do??? somebody please help
use buttuns Vol UP+Home+Power on/off
join recovery mode
wipe cache
Factory/data reset
. then again into download mode
make sure Kies isnot running / use to pc CTR+ALT+DEL and check about it
before plug in phone
run Odin v X.X loads 3 files from ur rom wanted to flash (becarfur if u wanna go to 2.3.3 and u never been before u must download rom with bootloader , check Ramads Post in General section )
try those and after post again what going on
Ok thanks...I'll try it as soon as possible and give you the feedback
Sent from my GT-I5800 using Tapatalk
if u cant access recovery mode, pull out the battery wait for 1 min or so
than hold the volume up+home button and insert the battery...
than apply Factory/data reset
Iflashed the phone with the 2.1 firmware ddjg4...
The phone worked...
After that I flashed 2.2 rom ddjp6...but when the phone booted all the apps started to force close...what should I do to get 2.2 on my phone?? Have I done anything wrong? Should I use a different firmware?? Pls help
Sent from my GT-I5800 using Tapatalk
Flash with repartition and pit
Sent from Miui powered SGS
i tried flashing with repartition and pit but still all the apps are force closing... by apps i mean the apps which come preloaded on the phone
I put my phone into manual recovery mode via Clockwork because I flashed a Cyanogen Nightly and didn't like it... I was going to go back to my Darky v10 ROM (which was draining my battery like a biyotch, hence the Cyanogen install)
My phone's now stuck; it turns off and on again, only getting as far as the Samsung Galaxy splash screen
This has happened before but I just popped into into recovery (via the 3 buttons) and reflashed the Darky zip.
Now I can only get it into download (which is useless to me because I don't have access to a PC)
I don't mind losing everything or going back to stock... I just want my phone to turn on
What are my options? Please help?
To flash away from cm7, your only option is a pc: you need odin to flash a samsung stock rom, with pit and repartition.
Sent from my GT-I9000 using XDA App
hey guys .
I am a new user of samsung captivate ..and i flashed my rom from fasty iii v1.3 to dlev v5 rom ..
it installed successfully ..but aftr rebooting ,my phone is not starting ..plz help .i am very tnsd
Did u disable the lag fix that was with Fasty before flashing Dlev ?
Can u get into Recovery to do this now if u did not before. If so do it, then wipe data, wipe cache, wipe dalvik cache, then reflash the Dlev Rom.
And if all of that fails, can u get into download mode ? If so, U may have to Odin to a stock Gingerbread with no bootloaders.
i am sry but i didnt knw that i have to remove the lag fix..
but the prb is ..i cant get in download or recovery mode..whenevr i press the power button..it shows "at&t" .then "galaxy s " and this keeps on repeating ..i am unable to do anything
You can use the button combo to get into recovery or download. --- Pull the battery, replace it and cover, hold down both volume up and down and power at the same time and then release when you see the at&t screen. That should boot u into recovery if you have i897 gingerbread bootloaders. I9000 gingerbread bootloaders is volume up + power button to get into recovery. Volume down + power to get into download.
I897 gingerbread bootloaders for download is phone off, hold volume +/- and insert micro usb into phone with usb end already connected to computer.
thanks a lot sir ..i have got into recovery mode ..can u plz xplain me in detail ..wat to do now..
Use the volume +/- to navigate up and down in the recovery and power button to select. Is there a "Disable lagfix" ??
no there is no option like "disable lagfix".
these are the options
*reboot
*apply update from sd card
*wipe data
*wipe cache partition
*install zip from sd card
*backup and restore
*mounts and storage
*advanced
*voodoo
*power off
Select voodoo, then u should be taken to more choices. Voodoo is the lagfix.
ok sir ..i have disabled lagfix in the voodoo menu ..
now ,wat i hav to do ??
select wipe data, wipe cache, then go to advanced and then wipe dalvik cache, then try reinstalling the dlev rom.
thanks a lot ..i wil just do that
it worked ..thanks a lot sir ..i am so grateful to u for ur help
Glad to help and glad you got it going. Have a good night.
gudnite ..tk care
Cappy stuck in boot loop
I tried installing gingerbread boot-loaders and everything seemed to go smoothly. Except for the fact that my phone is stuck in boot loop at the AT&T screen. I bought a jig and was able to get into download mode. I tried flashing to stock with Odin but it does not do anything and is still stuck in boot loop. I would greatly appreciate any help that would get my phone working again.
Chuckd8605 said:
I tried installing gingerbread boot-loaders and everything seemed to go smoothly. Except for the fact that my phone is stuck in boot loop at the AT&T screen. I bought a jig and was able to get into download mode. I tried flashing to stock with Odin but it does not do anything and is still stuck in boot loop. I would greatly appreciate any help that would get my phone working again.
Click to expand...
Click to collapse
Are you saying you successfully flashed stock back but its still looping?
It seemed to flash successfully but once it rebooted I thought it would make it past the AT&T logo but it did not.
Chuckd8605 said:
It seemed to flash successfully but once it rebooted I thought it would make it past the AT&T logo but it did not.
Click to expand...
Click to collapse
what version of stock did you try?
beast534 said:
what version of stock did you try?
Click to expand...
Click to collapse
I use this one here:
http://forum.xda-developers.com/showthread.php?t=731989
What it's the build number on your phone? It's located under the battery. Should be a number like 1007, 1012 1101
I'm facing a problem due to flashing my GT-S5830 (ACE)
I tried New release Cyanogen MOD 9 and didn't like it.. (Still many bugs, and FC! >.<)
So I went back to recovery mode in CMW5, and do..
1. Wipe Data+System+Dalvik
2. Restore my backup (Samsung Stock ROM, Gingerbread 2.3.3)
3. Reboot
But, then my ACE stuck in GT-S5830 Screen for a long time, till it's black screen blank.
I've tried the ODIN v4.38, ODin 3 v1.83
Download the ACE Stock package..
Start... And stuck at setup connection line..
Anyone can help me? I need my phone back.. :'(
Biboltz said:
I'm facing a problem due to flashing my GT-S5830 (ACE)
I tried New release Cyanogen MOD 9 and didn't like it.. (Still many bugs, and FC! >.<)
So I went back to recovery mode in CMW5, and do..
1. Wipe Data+System+Dalvik
2. Restore my backup (Samsung Stock ROM, Gingerbread 2.3.3)
3. Reboot
But, then my ACE stuck in GT-S5830 Screen for a long time, till it's black screen blank.
I've tried the ODIN v4.38, ODin 3 v1.83
Download the ACE Stock package..
Start... And stuck at setup connection line..
Anyone can help me? I need my phone back.. :'(
Click to expand...
Click to collapse
try to download and do not perform a backup
if didn't help try force download by :
pull out the battery
hold the power button+home+vol down
then insert the battery while holding " nedd some one assistance"
Biboltz said:
I'm facing a problem due to flashing my GT-S5830 (ACE)
I tried New release Cyanogen MOD 9 and didn't like it.. (Still many bugs, and FC! >.<)
So I went back to recovery mode in CMW5, and do..
1. Wipe Data+System+Dalvik
2. Restore my backup (Samsung Stock ROM, Gingerbread 2.3.3)
3. Reboot
But, then my ACE stuck in GT-S5830 Screen for a long time, till it's black screen blank.
I've tried the ODIN v4.38, ODin 3 v1.83
Download the ACE Stock package..
Start... And stuck at setup connection line..
Anyone can help me? I need my phone back.. :'(
Click to expand...
Click to collapse
Hey
Try removing the battery a couple of minutes, then put it in Download Mode and flash. Run Odin as Administrator.
If it doesn't work, try removing the SIM and SD Card.
If not, try doing it very quickly. I exolain, it seems that if you let the phone connected during a lot of time it won't work with Odin. Put it in Download Mode connect it to the PC and flash.
If it still doesn't work, turn off the Firewall and Antivirus.
Finally, if not, download Odin 4.42:
http://www.mediafire.com/?s5b38cc3qeeaj19
and Odin 4.43:
https://rs305p6.rapidshare.com/files/2608670876/Odin_Multi_Downloader_v4.43.rar
Put the device in Download Mode, and try flashing with Odin 4.42, if it stucks at Setuo connection, close it and open Odin 4.43 and flash.
If not, sorry :
Hit the Thanks button if helped
Sent from my GT-S5830 using xda app-developers app
First u need to enter in recovery menu and wipe data/cache/dalvin
Then flash stock rom
When it's done, MUST enter in recovery menu again and wipe data and cache
Now it's work !
100% :silly:
Only after this flash custom recovery and restore backup !