Hi,
After playing around with CyanogenMod and MIUI, I'm getting a "Welcome to Milestone" screen loop: every-time I reboot, I get the "setup wizard" one usually gets when the phone is turned on for the first time.
So I get a factory reset on every reboot... And I just noticed that it's only working properly on first boot: if I reboot, I get a whole bunch of process errors about random processes including android.process.acore in addition to welcome screen.
To get rid of these, I have to do a factory reset from recovery.
Here are the different steps I tried to recover:
Wipe cache, dalvik, factory reset
Re-applying the CyanogenMod and MIUI update.zip (not at the same time obviously)
Format SDcard
Re-flash GOT's Froyo sbf (using RSD Lite)
Downgrade to Stock 2.1 (using RSD Lite)
Re-flash bootloader (90.78)
Downgrade to stock 2.01 (I modified the sbf file to replace the bootloader with my version, as I found out bootloader is not downgradable)
Apply 2.1update1 OTA update
Boot without SDcard
And I'm stuck at the same point and running out of ideas on how to fix this.
So basically my phone is usable, as long as it doesn't reboot.
Any help would be really appreciated!
Thanks in advance
EDIT: After some testing it appears that data partition may be messed up (root explorer can't access it, and every app using storage in /data forces close).
Is there a way to recover it?
Related
First of all I hope this is in the right place: I did do a search but still couldn't find any help.
Here's my problem:
After getting a (delicious) taste for customisation after rooting and lagfixing, I decided to give custom ROMs a go. Hours of indecision passed and ultimately I settled on Doc and Stefunel's magical ROM. Due to currently being on 2.1, I chose to follow the set of instructions provided on the page for doing so.
All was well up until the very final step. When rebooting the phone through ClockworkMod Recovery, instead passing the Samsung boot screen into the Android system, the phone boots into CWM recovery. I've tried doing another factory reset, and reinstalling the ROM to no avail. I've also tried mounting "/mnt/sdcard" in order to place another ROM to flash from, but I keep getting a message telling me to insert a disk (what happens when you don't mount).
That's pretty much all there is to it. I'd be massively grateful for any help!
-anti
If you have made a backup of your apps then flash the JPY with Odin and then make factory reset in recovery mode. Then root with CF Root 1.3 (Or something like that) and flash CWM Recovery. That's what I would do.
Sent from my GT-I9000 using XDA App
from the recovery menu try wipe cache and dalvik, and reboot
This concerns my galaxy note n7000. I had a rooted checkrom v4 working on my note. I tried to install criskelorom v2 and got bootloops. I then tried to go back to stock via odin and flashed stock N7000 KL3 ROM which i had earlier used, I had to go to stock because after bootloop even recovery was not working. now after flashing stock i am getting a strange problem of the phone getting stuck at the welcome to gt-n7000 screen . "touch the android to begin" . nothing is happening after touching the android on the screen although i can change the language etc and even the pull down notification is also working but the phone is stuck at the initial stage. I have a nandroid backup of my initial checkrom in my internal sd card but cannot restore it before installing a rom with root and cwm. Kindly help . Thanks.
I'm having the exact problem. I'm hoping we can create a soft brick sticky thread. I walked away from my phone last night because I was getting frustrated.
My attempts to flash stock ROM via Odin resulted in the "not responding" message in windows. I can get to both CWM and download mode, however any ROM flashed via CWM results in the behavior described by the OP. fortunately I have access to another Samsung phone, so I can double check driver installation (although it worked for flashing previously).
I'm continuing a search through the forums to find some alternate methods for unbricking. Hope someone has an idea.
Thanks!
It seems that the stock roms i was trying to flash were nonwipe ones so i flashed xxla3 which is a wipe rom and was able to boot . I then flashed the earlier kl3 rom over this rom because kl3 is rootable. I then rooted and installed cwm booted into recovery and restored my earlier nandroid backup. I think the situation arises because the nonwipe rom was unable to clear the cache , user data etc
Thank you for the information. I had exactly the same problem. What did you use to root KL3 ?
Just wipe both cash and user data, and reboot.
reboot to recovery mode -> mount and storage -> format system, format cache, format data.
and do a factory reset and wipe cache.
problem should be solved cause that's what i did
Flo1389 said:
Just wipe both cash and user data, and reboot.
Click to expand...
Click to collapse
Thanks
liewkingyan said:
reboot to recovery mode -> mount and storage -> format system, format cache, format data.
And do a factory reset and wipe cache.
Problem should be solved cause that's what i did
Click to expand...
Click to collapse
daaamnnn!!! I'm scared to dead because of this!! Thanks dude!!!, no more **** ass ics
I had an issue like this once or twice.
http://www.youtube.com/watch?v=L5XjF6sPef4
This skips the that screen. then I cleared some things like google framework and it all was peachy
But its not wroking for me
So I just got this phone, and I've been trying to get it up to ICS. I've gone through and was able to complete the ICS update the first time completely, installed Safestrap, etc. Now this is where the issues came in. I did a backup, and then I started restoring some apps from titanium, from an old phone. This is where I started getting constant force closes. Tried fix permissions, went through again, same issue. So I wiped the phone, and went to restore with safestrap - it failed. Now on bootup, it refuses to even boot into safestrap anymore. All I can get is either a blank screen, or motorola recovery menu. By the fact that I can get into the motorola recovery menu, I presume it's not fully bricked, but I know there can be issues with installing on top of Safestrap.
Long story short, my question: In this condition, will flashing the same file I did during the ICS leak installation through Moto Recovery allow the phone to boot? Or will that cause a brick like downgrading from ICS does?
So, just to be sure, you installed one of the ICS leaks correct? Then you installed safestrap 2.0?
Sent from my Droid 4
Yes, that's exactly what I did. Was able to boot up into Safestrap (2.0) and restore through Safestrap, but after wiping /data I got errors with restoring a backup, and after rebooting to attempt it again, Safestrap splash screen no longer appears for me. It has the initial splash, and where the Safestrap splash should be, it just stays blank screen.
Not sure what would have caused this. I don't think you'll be able to flash the zip again since it looks for a .219 system build. Might be worth a shot though. You could also try booting into recovery and doing a factory reset. If neither of those work, try following the instructions for upgrading from one leak build to another.
Sent from my Droid 4
Tried Factory reset already, and attempted just flashing the update anyways - got an error saying build.prop file was invalid/missing?
Now I'm going through the tool steps to swap between ICS builds. At least I'll hopefully get something working.
Though I did do a step I forgot to mention, if that explains why it happened. After the Safestrap restore failed, I tried to do a partial restore of /system and /data. /system restored fine, when I went to do /data it said it was restoring /system in the log - could that have been an issue? A possible mistake in safestrap that overwrote the wrong folder? Or just an issue with the menu?
Doing the ICS switch got it working for me. Now to attempt round 2 and see if I can get into CM9, and Safestrap works right.
More research, root cause : Forgot to install busy box when doing the initial root.
Glad you got it working!
Sent from my Droid 4
Hi all, my name is Daniel.
I am using a motorola Milestone A853 for the past one year and never faced any issue while rooting or installing custom roms right upto cm10.
from last two months the milestone has not been working properly. It so happened i had installed CM 9.0.1d and everything worked fine. but once the battery died the phone did not boot up and was stuck on moto boot logo and kept restarting from there. I tried to go into open recovery (fufu minimod) using the X+power key and it goes into recovery but after loading recovery it did not display any options and the other text was red in color and it showed the error failed to load menu.init. I replaced the update.zip file along with the open recovery folder, but still nothing worked. I then tried another open recovery but still open recovery never loaded. Then i SBF'ed the device and went back to stock and was able to use my phone again. But then when i try to root the device again i am not able to root using vulnerable SBF as it does not install though RSDLite shows pass. Then i used superoneclick to root and that did the trick. But still open recovery never installed or load. Luckily androidiani recovery which displayed an error cannot mount but still created the menu and i was able to install custom OS but only cm 7.2.4e and not cm9 nor cm10. I cannot reboot the phone as the phone never starts up. only after clearing dalvik and wiping cache phone boots up. After a certain time now i still cannot install cm7.2.4e as it does not load and gets stuck on custom bootscreen, so i installed MIUI rom which works and starts up but i still can never reboot my phone.
Errors Seen E: cant mount /cache/recovery/command
Kindly help as the phone is just barely working.
Your phone has some serious issues...
How stable it is with stock rom? Maybe You should flash a stock 2.2 and see if you have any issues.
If not, then flash vulnerable recovery and so on, step-by-step.
Maybe it will be easier to locate the source of the problem this way.
Tried Everything
Erovia said:
Your phone has some serious issues...
How stable it is with stock rom? Maybe You should flash a stock 2.2 and see if you have any issues.
If not, then flash vulnerable recovery and so on, step-by-step.
Maybe it will be easier to locate the source of the problem this way.
Click to expand...
Click to collapse
Thank you for your reply. I have tried flashing stock 2.2 and still I cannot reboot the phone without wiping cache and using the reset factory option in stock recovery. Using superoneclick I can root it and install androidiani recovery but I cannot use cm10 or cm 9. after installing cm9 the phone just restarts after cm9 boot screen and after installing cm10 the phone shows the stock android boot screen. cm 7.2.4e installs as well as miui but if battery dies or if I have to restart the phone if it gets sluggish and slow then I cannot...everytime for the phone to boot I have to wipe dalvik and cache for custom roms and for stock roms I have to wipe cache and factory reset.
SO basically I am stuck...have tried changing the sd card, repartitioning the sd card, but nothing worked
Open recovery cannot be used only andoidiani works after popping up some errors.
Kindly help.
I have Xperia Z3c 5.1.1 rooted with locked bootloader. It is on wifi only. Yesterday I've turned wifi on and suddenly have got device off. I tried to reboot. I see the Xperia logo and bluish Xperia start screen with waving elements. However, the home screen and apps are not appeared, have just black screen. The battery is fully charged (green led). I tried several times reboot today as well with the same result. I believe the phone is soft bricked.
The phone is rooted with NDR Utils and TeamWin Recovery (TWRP). I also have Titanium backup.
After reading this forum I found several ways to unbrick the phone:
1. Soft reset (Power + VolUP) up to 1 vibration.
2. Hard reset (Power + VolUP) up to 3 vibrations.
3.Use flashtool (flashmode) and flash ftf file. Should I flash Kernel as well?
4. Use phone System recovery (Power + VolDown).
Which method I should try first? Can I save root and my current Lollipop firmware or I should go and start from the scratch with rooting and flashing 5.1 again?
Thank you for your suggestions.
Try soft reset and hard reset. This don't break your phone but it is worth a try. If this will not work do NAND backup (full backup of phone) in recovery. Now you can try clear cache in TWRP (wipe -> advanced wipe -> check cache -> swipe to wipe). If this don't work try clear dalvik/art cache.
If this metods didn't work flash same rom (if rom was't pre-rooted root after flash). If system starts you can restore NAND backup without system partition and cache.
If system don't start after restore backup the last chance is clear rom flash.
I don't know where the problem is but in my place I would do that
Thank you krzysiek546 for your help.
I have tried soft and hard reset, both unsuccesful. I made backup and wiped cache and dalvik from within TWRP. The phone after apps optimization has started the system (there was black screen but I was able to see home and Back buttons, which were non-functional, i.e non-responsive.) The screen became black again after a few secs and did not return to the life then.
I think I'm going to flash the Rom. My question is there is any chance to get brick again in case I will restore from the TWRP backup (if there was a virus or something?). May be I should wipe data, cache and dalvik and only then made a backup?
Also, when you saying "a clear rom flash" as a last chance do you mean factory reset?
Thank you.
Don't wipe data before backup. This is like doing backup after format system. It doesn't make sense.
Have you tried this metod with flash with nand backup and flash same rom (zip from twrp or ftf from flashtool) and restoring data without system partition (it's important)? In this i mean something corrupted system files. In this metod you can save your data. You just reinstall system and restore data from nand backup.
When I sayed "a clear rom flash" i mean wiping all data in recovery and flash rom from flashtool or twrp without restoring anything. You can do it first. I think now it's beter because you can check did that fixed your problem and if this "clear rom flash" repair your problem you can restore data from backup.
As to your question. Yes you can get brick from restoring data from twrp but in my opinion this virus or something must have root permissions to do this.
After installing the newest supersu, I also get this bootloop. Is there a chance to undo this without wiping data?
Edit: ok, after hard reset, flashing SU, cleaning caches etc. (which all did not help) I reflashed the ROM, now it works again. Pheeew.
firox said:
After installing the newest supersu, I also get this bootloop. Is there a chance to undo this without wiping data?
Click to expand...
Click to collapse
Try to install SuperSU v2.81 - author apologized for inconvenience caused regarding 2.80 update. I got this bootloop too and solved it by installing SuperSU v2.81.
MATPOC said:
Try to install SuperSU v2.81 - author apologized for inconvenience caused regarding 2.80 update. I got this bootloop too and solved it by installing SuperSU v2.81.
Click to expand...
Click to collapse
When I had that error, it was still V2.80 and no update round the corner.
Thank you for the link. Worked great for me. Installed per TWRP.
Well, in my case I didn't updated SuperSU, just have turned on wifi. I think the problem may be in Wallpaper app I have installed previously. It changes wallpaper every day, but I noticed sometimes the background of my home screen where all apps are became black.
Anyway, only "clear rom flash" with wiping cache, dalvik and data helped me. I then installed pre-rooted Lollipop ROM I made before and restored all custom apps from the Titanium backup. BTW, don't try to restore system apps from the Titanium, I've got the error with Xperia keyboard and have to make a restore whole system from TWRP.
Thank you krzysiek546 very much for your help.
MATPOC said:
Try to install SuperSU v2.81 - author apologized for inconvenience caused regarding 2.80 update. I got this bootloop too and solved it by installing SuperSU v2.81.
Click to expand...
Click to collapse
I also got bootloop after installing latest SuperSU from Google Play.
How can I install 2.81 (or 2.79) when phone is in bootloop?