First, many thanks for providing a way to upgrade the Galaxy S to Froyo.
It is much appreciated, despite the strange situation I am now in.
My first reason to get this phone was to have a good way to connect my laptop to the internet when I go abroad.
My Galaxy S is locked on T-Mobile. It came with Eclair and Mobile AP worked perfectly.
Since the update, it does not work. I am glad that it solved the missing Flash issue, which was frustrating. But Mobile AP was just as important to me.
Is there a known fix???
I also cannot get Kies to work on that laptop, so it means I cannot use USB tethering. But the one I really need is Mobile AP.
When I launch Kies on this computer it takes ages to start and there is an error message:
"Failed to initialize services: Retrieving the COM class factory for component with CLSID {7A1A13F5-B96B-492A-B591-D7526E0B3013} failed due to the following error: 80080005."
Then it cannot detect the phone. It works fine on my main (desktop) PC so it(s not due to te phone.
Still, Mobile AP is the big one.
And if I cannot fix that, what do I do to go back Eclair? It's a T-Mobile phone that was upgraded to Froyo using the Kies Registry Patcher.
Simple please? I am into technical stuff but phones are NOT my area at all, I am an AUDIO guy.
Related
HI there, I have the dreaded 'unable to scan networks' wifi problem- it started after I set up a mobile AP (I didn't turn the AP service off after I'd finished with it- I wonder if that's what caused it?)...
Anyway, I've since learned via this board that I can fix my wifi by 2 methods: 1) performing a reset (would rather not) and 2) editing a line somewhere, root access is required.
I do have a third option- waiting until the 2.2 OTA update comes through, which I understand will require (and perform) a reset anyway.
However, I'm sick of waiting for 2.2.
What I'd like to know is: If I root my phone & fix my Wifi, will I still receive the OTA update?
Anybody?
TIA.
the 2.2 froyo is not OTA
it is OTK (over the kies)
just turn off your phone, then turn it back on, that should reset your WiFi stuck i/o
some times the GPS does that too, just turn off the phone, turn it back on and they work right away.
in contrast to the HTC Windows Mobile phones, the SGS is much much much better, i barely have to do any restart of the phone with Android
with Windows Mobile it was at least 10 reboot a day
Restart doesn't fix it... Tried removing battery, etc. etc.
The 'unable to scan networks' problem is a known issue- at least to this board, If not to samsung.
Sent from my GT-I9000 using XDA App
Im in the same boat as you mate with my Samsung galaxy s, i have tried turning it on and off with alternate battery in and out methods, my wi-fi just wont work now, it turns on, comes up saying "Unable to scan networks" and turns the wifi off.
I have read on many posts about the issue and the best fix appears to be here:
hxxp://forum.xda-developers.com/showthread.php?p=8062313
*Sorry its not linked, this is my first post so i assume it wont let me post links until im roughly around the 25th post mark.
The issue i find with using this method is that in order to browse the phone at a root level to get to that file, you need to pay for the App in the android market to do it.
I have rooted my phone already and already applied the lag fix (boy did that change things), but im more contemplating doing the upgrade to 2.2 than buying the app just to fix a wifi issue. Im hoping this gets fixed in 2.2, or at least a more easier solution / fix.
My question is, if i did buy the app to browse the phones file system and i fix the wifi, does it fix it permanently or just until it happens again and i will have to follow the same process again... ?
did you both turn off Bluetooth when using WiFi?
you can't use BT when using WiFi
I've never had to turn off bluetooth to use wifi before...
However: PROBLEM IS NOW FIXED!!
Here's how I did it:
First, bluetooth was off.
Tried to upload a video shot on the phone to youtube. Got message along the lines of 'will only upload video over wifi'
Next message pops up: 'waiting for wifi'
THEN message box saying' signal strength excellent' & asking for my wifi password!
I've been without wifi for 2 weeks, this is brilliant. Give it a go, try uploading a video to youtube.
I reckon it overwrites the bad line, but who knows. Maybe its a bluetooth thing. I don't care, it worked for me.
Spread the news!
Sent from my GT-I9000 using XDA App- over wifi!
how would I go about updating, when 2.2 is official, without kies or rooting? I've lost patience with kies!
This was mentioned on another topic already but here it is again:
Heimdall, Odin, Rom Manager Clockwork just to name a few, there are many other ways to go about this even without Kies
AllGamer said:
This was mentioned on another topic already but here it is again:
Heimdall, Odin, Rom Manager Clockwork just to name a few, there are many other ways to go about this even without Kies
Click to expand...
Click to collapse
cool, cheers! I think I will try Odin!
Hi guys, I've had a look around the net and asked on other forums, but can't seem to find the answer to my problems, so someone recommended here.
Apologies, if this has already been covered, but I did have a search and couldn't find what I was looking for.
I think I have two problems, don't know if they are related, but don't think so.
Problem 1:
Got the Galaxy S for my daughter for Christmas. She has never been able to log in to the android marketplace. She was using the her google log in which wasn't a gmail account. Today I signed her up a gmail account, and tried again and got the following error message:
You don't have a network connection.
This could be a temporary problem or your phone may not be provisioned for data services. Please try again when connected to a mobile network, or connect to a wi-fi network. If the problem continues, call customer care.
Click to expand...
Click to collapse
The phone is definitely connected the net by wi-fi, which I have proved to be working correctly.
Problem 2:
To try and solve problem 1, I thought I would see if the firmware was up-to-date, however, I can't get the phone to connect to Kies. I have tried on two different laptops, one running Vista and one Windows 7. It seems to be saying it's some kind of driver problem. I have clicked on install drivers on Kies, but it makes no difference.
I have made sure the phone is selected Kies. I have also tried selecting mass storage and connecting through My Computer, but still it doesn't recognise the phone.
I believe the phone's firmware is out of date, as it is 2.1 update 1 and I believe 2.2 is available.
Apologies for the long post, can anybody help me to get Kies and marketplace working?
I am not interested in jailbreaking the phone, as it's for my daughter.
The phone is a contract phone, in the UK with orange. I have made sure orange safe guard is not active.
Thanks in advance, if you need anymore infor, i will try and supply it.
Any idea's?
Bump.
Can anybody help or is the best option to try a factory restore / take it back to the shop?
Well there is alot of tread that explain how you connect to kies.
If you can use internet then it should work.
Have you try to power of the phone and wait 5 minutes and then power it on?
**DamianGTO Steam kernel. 350MB Ram. 500HZ. ext2/jfs . js3 base**
I have got the market place working by doing a factory restore, but for the life of me, I can't get the phoned connected to Kies to do a firmware update.
I have tried on 4 different laptops.
1. Windows 7 Home Premium 64 bit.
2. Windows 7 Home Basic.
3. Windows Vista.
4. Windows XP.
and I can't get it to connect on any of them.
I have tried un-installing and re-installing Kies. I have tried using different usb wires and ports. Phone charges by usb when plugged in.
I have tried connecting the phone in both Kies mode and Mass Storage mode.
The error I keep getting seems to be a driver error:
Device Driver software was not successfully installed.
Please consult your device manufacturer for assistance in getting this device installed.
Bluetooth peripheral device - Driver not found
Click to expand...
Click to collapse
Looks like I'll need to take the phone back or ring Samsung.
just try to reconnect it
astralmaze05 said:
just try to reconnect it
Click to expand...
Click to collapse
Never thought of that.
p-2-b-a-a said:
Never thought of that.
Click to expand...
Click to collapse
tell me if that trick works
Are you using a USB hub? If so don't . Plug it straight into the rear USB of your computer.
Do you have Bluetooth active? Turn it off.
Are you using any other Home than the one it came with (the screen you see when you first turn it on)? Go back to the stock TW Launcher
In the Kies Tools menu click on Install Driver and then try again after it's finished.
Finally if it is still not connecting leave it plugged in and go into device manager. If the drivers show up there they should be listed as Samsung i9000 if I remember then right click and un-install drivers then unplug phone and plug it back in after a few moments.
Also use the cabel that did come with.the phone.
**DamianGTO Steam kernel. 350MB Ram. 500HZ. ext2/jfs . js3 base**
My Dell passed down from my father is ticking me off. My captivate 2.2 is rooted and TiBu froze the Teth Man 1.0 so I can tether my Laptop wirelessly and my Sony Vaio PC with the usb. No problems there. In comes this Dell, fast and pretty. Installed all the official drivers from Samsung, hooked up my phone, everything was going fine until i checked USB tethering.
As soon as i activate tethering, my phone is no longer recognized by the computer. In device manager everything works fine with the phone in debug. Drivers working properly and all that. Then i check USB tethering and the adb interface disappears, the android usb modem disappears... uncheck and everything goes back to normal. Doesn't happen on the other computers.
Does anyone have any clue what might be going on here? Is there a setting on this Dell I need to change? I'm running Windows XP pro 32 bit if that helps. Does anyone know what driver runs this feature? Because the device manager actually recognizes it as a samsung_android but can't seem to get the right driver to get it functional in tether mode.
Please don't send me a link to the Samsung website. Been there done that.
I would suggest you install PDAnet on both android and Dell laptop. PDAnet will install all the necessary drivers.
I have had similar problems.....I just flashed cappy to serendipity and went into settings...wireless and network....tethering. Just plug in the device to the computer and hit tether! Note: you may need to install drivers (kies mini
Sent from my SAMSUNG-SGH-I897 using XDA App
Bravo with the PDAnet suggestion. I've also been considering serendipity for some time and kies mini helped out a lot.
Updated problem: got all appropriate drivers with kies mini. Everything went fine. Installed an app called Masked Crusader to help with speed and performance. Ended up screwing up my phone to no end. Uninstalled and got internet function back on my device but am unable to tether. DNS issues. Can't seem to return phone to previous setting. PDAnet got me back online after the Masked Crusader fiasco, but only through usb. Mobile AP appears to be working but I can't connect my iPod, wii, or laptop... all from dns failure. You guys were more than handy getting my dell pc online, then I had to be greedy and screw things up for the hopes of increased upload speeds. Begging for redemption. I will stay on the right path from now on, I swear.
Samsung Captivate Froyo 2.2 (official)
what i do is use mobileap for laptop. Then connectify from laptop to all others. Works perfect.
Mobile ap isn't working for me any more. *sad face* The market app called Masqed Crusader screwed it up. Supposedly it only changed my dns from stock to goggle's dns. Unfortunately I think it may have changed other settings too because mobile ap will appear to connect but won't transmit any data. Need to know how to find my original settings so I can try to set it back.
Samsung Captivate Froyo 2.2 (official)
Would love to have a better answer but sounds like it's time for a "factory reset".
Try android wifi tether. Screw barnacle and that other crap.
Have you tried the mobile ap option?
boborone said:
what i do is use mobileap for laptop. Then connectify from laptop to all others. Works perfect.
Click to expand...
Click to collapse
i can vouch for connectify. i use it for home wifi cuz i dont have a wireless modem but i have a wifi antennae in the back of my pc. works perfectly.
silvertag said:
Would love to have a better answer but sounds like it's time for a "factory reset".
Click to expand...
Click to collapse
Noooooooooooooooooooooooooooooooooooooooooo! Dreaded that answer. To the other posts, yes I tried mobile ap. That's what no longer works. Used to be my favorite thing about this phone. Will try android tether first, then off to reset... *another sad face*
Samsung Captivate Froyo 2.2 (official)
Hi guys,
After many hours and days of searching google for a solution to this I'm still stumped.
I have a Galaxy S i9000 running Gingerbread 2.3.3 (had same problem with previous versions also) and I am trying to connect it to my Nokia 616 car kit in "hands free" mode, however, it keeps automatically connecting via "remote sim mode". I can confirm there is no way to disable rSAP (remote sim mode) through the nokia 616, nokia staff were not very helpful either.
There was an option in my old Samsung Jet (i think it was running touchwiz) bluetooth settings which allowed me to switch remote sim mode on and off. The only setting that exists on my SGS is after I connect to the nokia 616 i get the "Deactivate Remote Sim Mode?" option from the drop down bar... However, when I do so, the connection to the car kit is lost and upon reconnect it automatically connects using "Remote Sim Mode", regardless of how many times i try an "deactivate" it...
The only posts I could find about deactivating remote sim mode tell me to hit "Yes" to "Deactivate Remote Sim Mode", then to switch bluetooth off and then on. This does not solve my issue. Problem persists.
The only thing I can think of now is somehow finding perhaps a command line instruction that I can run from terminal to disable remote sim mode or even change a config file somewhere to deactivate it.
Does anybody have any idea how this can be done or maybe just give me a lead on where I can search next, I've hit a dead end with this now and im sure it can be done, somehow.
Thanks heaps for your help.
I'm sorry I cannot help you with this problem, but at least you're not the only one: I have exactly the same problem, but then with a Nokia 616 and a Galaxy S2.
I want it to connect with the normal HFP, so I do not loose the internet connectivity on my phone...
SOLVED Finally!
So after a while of searching then giving up, then contemplating ripping out my nokia 616 car kit and setting it on fire, I decided to revisit this issue and here is how I managed to disable/remove/deactivate remote sim mode or rsap... please note that I havnt really tested to see if this affects any other bluetooth functionality (i dont think it does though) so do at your own risk...
I ended up flashing my galaxy s with Darkys rom 10.2 extreme edition which gave me some nifty options of removing some stock bluetooth apps... I noticed there were a number of bluetooth related apps there, Bluetooth.apk , BluetoothOpp.apk, BluetoothPbap.apk, BluetoothTestMode.apk and the devil himself BrcmBluetoothServices.apk... at first i uninstalled them all except Bluetooth.apk, my phone starting throwing some bluetooth error which was expected, these errors disappeared after I rebooted the phone... I noticed that the 616 no longer connected using rSap (victory!), however, I was almost certain that not all of the apps i removed above would be causing the issue, and im sure that if anything having them removed would cause issues elsewhere so the process of elimination began... I reinstalled them all again, rebooted my phone, sure enough remote sim mode was back, then one by one i uninstalled, rebooted, tested, etc etc untill i came to the conclusion that the app responsible to rSap was in fact BrcmBluetoothServices.apk, after uninstalling it and rebooting Hands Free mode works a treat, I still get a "download error" when i try to download my contacts to the 616 but Im not to fussed about it, at least i can still use all the functionality of my phone in my car now, internet etc etc... as mentioned earlier I dont know if this will have any effect on the other uses for bluetooth so do be careful, not a huge issue because it can be easily reinstalled if nessecary using DarkysRom Tool...
Now I am sure this can be done on a stock firmware, you would most definitely need to root the phone and then find some sort of system app manager to hunt down BrcmBluetoothServices.apk and remove it...
Thats it! If anybody can work out how to successfully download contacts to the nokia 616 please post it here or pm me.
I just bought a Samsung G3 which was a store demo, the phone boots and works OK, but I'm fearing I might not be getting the full potential the phone has to offer and I also hate seeing "Retail Mode " in the menu. I was wondering if I could flash the unit from SM-R840X to the latest firmware for R840, this unit is not LTE, just BT
Thanks in advance
Regards
No risk no fun...
Try first Combination Firmware from SM-R840...
Then in second step Stock Firmware from SM-R840...
If out of luck...
You need USB cable... if your project fail...
Good Luck.
Best Regards
Are you referring these files?
Thanks for the help
I've flashed all the files, my 840 BT was XAR now is ITV. No update from BTG6 despite all around the world they are 2 or 3 different updates after that. Anyone with the R840XXU1BTK1 or more? I don't want to pay easyfirmware cause I have the hardware, I have the firmware, I assume is ridiculous to pay for an update Samsung should delivery to all of us.
So I'm trying to connect to ODIN3 without success, using running Win10, firewall /antivirus etc disabled, , ODIN3 launched as Admin, watch developer mode ON, debug mode ON, set watch to connect wireless, and I get CONNECTION FAIL: CONNECTION TIMED OUT (110) anyone care to guess what I'm doing wrong
Thank you
Have u set it up as WiFi Always in the Tizen connections menu ?
Does anyone have the firmware for this?
I do have a connection via NetOdin3!