i want to extract the PDA, Modem and the CSC files from one tar rom file..
beacouse some of the I9000 roms are in one tar file.
and i want to flash woth different modem file.
regards
english??? do you know it?
u058515 said:
i want to extract the PDA, Modem and the CSC files from one tar rom file..
beacouse some of the I9000 roms are in one tar file.
and i want to flash woth different modem file.
regards
Click to expand...
Click to collapse
I want you to post this on the RIGHT FORUM this is Development only.
Thanks!
Related
This may be a dumb question, and I've looked around the forums, but can't find an answer.
I've downloaded KC1 for my Galaxy S, and the file I downloaded is I9000UGKC1_homebinary.tar
I looked inside the tar file and there is cache.rfs, factoryfs.rfs, modem.bin, param.lfs, etc
How do I flash these with Odin?
Thanks
what is the file used for? is it a modem? kernel ?
Well, I downloaded the firmware file for KC1 for the i9000 from samfirmware.com
I was wondering how to upgrade my phone to that, but it only had the one TAR file (and not the PHONE, PDA and MODEM files that other firmwares have).
So i'm not sure how I'm suppose to flash it.
oh!
well you place the file in the PDA tab in odin, and flash away (while repartition is UNCHECKED)
As per the instructions on Samfirmware in regard to flashing with odin .
jje
suppressor said:
oh!
well you place the file in the PDA tab in odin, and flash away (while repartition is UNCHECKED)
Click to expand...
Click to collapse
Thank You! I got stuck on that single file as well.
i am looking for completely stock .tar files to flash through odin
i bricked my tablets and i need to revert to stock. I have the stock recovery file but i can't find a stock rom or a .pit file
You can find it here,
http://forum.xda-developers.com/showthread.php?t=1582943
and make sure you got the correct stock rom for your tab version.
Installation guide is there too.
also when using odin, make sure KIES is not running on tray
(for windows: [ctrl + alt + del] > Processes tab > terminate KiesTrayAgent.exe)
it doesn't have the US model listed
It doesn't really matter,As long as it has english language.
Because you're only going to use it to get the recovery back working to flash another rom.
Just grab the latest firmware for the 8.9 wifi only model, P7310XWKI2
one last question? any idea where i can get the .pit file?
There isn't a need in using .pit file.
and i don't know where to get it.
The *.tar.md5 file you found after unzipping it will just do.
load is to the PDA in odin3.
MrHome said:
There isn't a need in using .pit file.
and i don't know where to get it.
The *.tar.md5 file you found after unzipping it will just do.
load is to the PDA in odin3.
Click to expand...
Click to collapse
Someone help me out.... when I unzip, I don't have a .tar or a .md5 file.
to many stock roms...
http://www.sammobile.com/firmware/
best regards
gerickt said:
to many stock roms...
http://www.sammobile.com/firmware/
best regards
Click to expand...
Click to collapse
No help at all.
SmittyRN said:
No help at all.
Click to expand...
Click to collapse
There is a thread for that. Redownload your desired firmware.
Hi all! Need help: i update firmware for my SG Note from stock GB 2.3.6 to stock 4.0.3 Indian , now i cant write any symbols cuz then i try phone show me "null" . USSD *#1234# - CSC Unknown. How i can fix it? Cant find anywhere CSC SER region.
Thx for help!
sry for english )
How did you update? PC Odin? If so then the CSC would be inside that zip, it's the cache.img, flash it with PC Odin and it should solve your null issue
rename the tar.md5 to tar then open in winrar or 7 zip etc and get the cache image
ie N7000DDLP8_N7000ODDLP5_N7000DDLP4_HOME.tar
matius44 said:
How did you update? PC Odin? If so then the CSC would be inside that zip, it's the cache.img, flash it with PC Odin and it should solve your null issue
Click to expand...
Click to collapse
Yep by Odin 1.87. i already tried flash cache.img but Odin wants *.tar files and dosnt support *.img (or iam doing something wrong) . Btw, how flash CRC correct by PDA or by CSC field?
Shurey said:
Yep by Odin 1.87. i already tried flash cache.img but Odin wants *.tar files and dosnt support *.img (or iam doing something wrong) . Btw, how flash CRC correct by PDA or by CSC field?
Click to expand...
Click to collapse
Try with Mobile Odin, I believe it supports .img file since it has a cache field..
Copy the cache.img file to your sd card, open Mobile Odin and tap on cache and then navigate to where you copied the cache.img file. It should read it without issues
EDIT: Do you have root? Obviously you need root to use Mobile Odin but seeing you flashed a stock ROM I doubt you have root..
Try to find any ROM for your country that is not one file, there should be one that contains multiple .tar files, you'll find CSC.tar there. Sorry not helping very much here
Long story but I need to downgrade my i9000 from CM10 (currently on c-rom bean v2.3) back to stock 2.3.6 and couldnt find anything specific to the i9000 on to how to do it. Can I just get the stock firmware (ie PDA, CSC, Phone) and then flash through Odin? But I read on XDA (http://forum.xda-developers.com/showthread.php?t=1729458) that I may also need PIT and Bootloader? If so, where can I download these files??? Any help greatly appreciated!!!!
blion said:
Long story but I need to downgrade my i9000 from CM10 (currently on c-rom bean v2.3) back to stock 2.3.6 and couldnt find anything specific to the i9000 on to how to do it. Can I just get the stock firmware (ie PDA, CSC, Phone) and then flash through Odin? But I read on XDA (http://forum.xda-developers.com/showthread.php?t=1729458) that I may also need PIT and Bootloader? If so, where can I download these files??? Any help greatly appreciated!!!!
Click to expand...
Click to collapse
You have to download any 3 files stock ROM (I suggest you JVS, as JW versions can damage your IMEI), then select PDA, CSC and Phone
in ODIN. You don't have to have bootloader, as it is already in PDA, and yes, you have to have PIT file, it is usually within archive with ROM.
Just flash it and you're done. For download go to this thread: http://forum.xda-developers.com/showthread.php?t=1837223 and you'll find
there any ROM you want. Hope it will help you.
--
Leszek
twinsen.net said:
You have to download any 3 files stock ROM (I suggest you JVS, as JW versions can damage your IMEI), then select PDA, CSC and Phone
in ODIN. You don't have to have bootloader, as it is already in PDA, and yes, you have to have PIT file, it is usually within archive with ROM.
Just flash it and you're done. For download go to this thread: http://forum.xda-developers.com/showthread.php?t=1837223 and you'll find
there any ROM you want. Hope it will help you.
--
Leszek
Click to expand...
Click to collapse
Thanks for your prompt response. I am looking to go back to stock GB and last time I downloaded them from here (http://forum.xda-developers.com/showthread.php?t=1102881&page=1). I chose XWJW8/XWJW1/VAUJV9/Sbl (CSC: VAU (Vodafone)) as I live in Australia and my provider is Vodafone. But how do I extract the PIT file??
Also out of curiosity, what if I chose the stock rom of another network provider? Does it make a difference??
blion said:
But how do I extract the PIT file??
Also out of curiosity, what if I chose the stock rom of another network provider? Does it make a difference??
Click to expand...
Click to collapse
you cannot extract a PIT File, you can download a 512 PIT file from My Android Collections
If you use telstra , it will not work for vodafone and vice versa as they are branded
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
xsenman said:
you cannot extract a PIT File, you can download a 512 PIT file from My Android Collections
If you use telstra , it will not work for vodafone and vice versa as they are branded
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
Click to expand...
Click to collapse
Ok. So I take the 512 pit file from your link and also the official GB firmware from Ramad's thread. Then flash using Odin with only PIT, PDA, Phone and CSC. Also "re-partition", "Auto reboot" and "F Reset Time" needs to be ticked. Sorry about being so padantic but just wanted to make sure I get the steps right the first time. Thanks!!!
blion said:
Ok. So I take the 512 pit file from your link and also the official GB firmware from Ramad's thread. Then flash using Odin with only PIT, PDA, Phone and CSC. Also "re-partition", "Auto reboot" and "F Reset Time" needs to be ticked. Sorry about being so padantic but just wanted to make sure I get the steps right the first time. Thanks!!!
Click to expand...
Click to collapse
yup, that should do it mate.
friends
I need a Rom i9305 with separate files (boot, pda, modem, Csc).
To use as Odin
To try to repair a recovered i9305 dead boot
Now he just goes into Download Mode
grateful
Download a stock rom for your area from SamMobile then flash with Odin and reboot
Raistlin1158 said:
Download a stock rom for your area from SamMobile then flash with Odin and reboot
Click to expand...
Click to collapse
More Stock which rom?
Already downloaded over 10 and have not found a partitioned.
All are now up single file
Unzip , then unzip again to get the various components of the rom or go here: http://forum.xda-developers.com/gal...305/index-samsung-galaxy-s3-lte-roms-t2206898
Raistlin1158 said:
Unzip , then unzip again to get the various components of the rom or go here: http://forum.xda-developers.com/gal...305/index-samsung-galaxy-s3-lte-roms-t2206898
Click to expand...
Click to collapse
Thank Intent
Any more of them are Separate.
I need a Rom with the files (boot, pda, modem, Csc). separate