Dear Friends
Good Day To You all …
I have just bought a new pda2k I=mate and I was trying to be a smart person and update its rom and I think I messed up and now I’m getting a blank screen with a word serial on it and USB when I connect the sync cable. And I didn’t make any backup can some one help out im so sad about this thing
Thank you for your help in advance
Regards
Ati
Dont Panic
The first thing is... dont get panic with this.
Just do a soft reset,
put the device in the cradle with active sync on (dont worry of any message that comes on the PC),
double click on the ROM update file
Do the process again.
It will work now!!!
PDA2K upgrade problem
Dear friend,
Thank you for your fast reply yes I checked and did all of this but nothing is happening and always I get an error i tried all that has been posted but nothing happend it checks then it stops error I think 106 maybe I have the wrong update verssion how do I get the proper one ? and looking for any more advice, i'm very unhappy the first day I get it and see what happens.
Thank you all
Warm Regards
Ati
Re: PDA2K upgrade problem
ati said:
Dear friend,
Thank you for your fast reply yes I checked and did all of this but nothing is happening and always I get an error i tried all that has been posted but nothing happend it checks then it stops error I think 106 maybe I have the wrong update verssion how do I get the proper one ? and looking for any more advice, i'm very unhappy the first day I get it and see what happens.
Thank you all
Warm Regards
Ati
Click to expand...
Click to collapse
I dunno why ppl are doing the FIRST day a rom upgrade, firstly u should go over the upgrade posts and get familiar with the updates and how to do them. Sorry to say that mate but u deserved ur punishment.
Well since you can't play with your device try reading wiki.
I'd bought my htc p3600 pro (black, free from sim-lock & free from any carrier) from London.
As advised by TRINITYGUIDES.INFO site I tried to do HardSPL with all the three available HardSPL files, but of no avail.
When the HardSPL's progress bar comes(on pc) it gives a message on my phone " Enterbootloader.exe....This may harm your device...Do you want to continue.." I pressed yes & the process stopped & gave an error on pc "Error 246 Device not responding" & on phone screen showed the bootloader with
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
I did soft reset on my p3600 & its working as usual with it original spl infos.
I want to put official WM6 SEA version(ROM+RADIO) on my phone...Please help.
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
wingnutLP said:
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
Click to expand...
Click to collapse
Search is great function
http://trinityguides.info/index.php?option=com_content&task=view&id=37&Itemid=67
wingnutLP said:
Sorry!
I am an idiot.
Thanks
Click to expand...
Click to collapse
sorry I tried a Google search on the error message and came up with this thread!
wingnutLP said:
sorry I tried a Google search on the error message and came up with this thread!
Click to expand...
Click to collapse
Search more...
With this link:
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
if you search error 246 you will get the solution on 11th answer.
Search more...
Have the same [Error 246]! How can I definitly fix it?
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Some specifications....
Sorry.... I have a P3600 White with Olipro 1.20 and rom Elias 1.9 SE Lite...
Tompo81 said:
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Click to expand...
Click to collapse
Before flash manually enter bootloader. After start the rom update utility. (As www.trinityguides.info suggest). You will not get error 246 any more
thanks for answer
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Tompo81 said:
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Click to expand...
Click to collapse
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Ok, now I really understand
Ok, this is a very good anwser, short and clear... thanks...
Ciao
Tompo
fktsndr said:
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Click to expand...
Click to collapse
When i connect my touch hd to pc in active sync mode, then shutdown device an run in bootloader (volume down and power button at same time) i get the tricolor screen and after a while i get the progress bar on my phone and on pc. But i stays on 0% and says 'update error' after a while.
please help
I Have the Same Problem the Status bar Freeze On 0% and nothing happened
Until the Update Error Message Displayed
Please Advice
Thank You
Note: I Have HTC Diamond2 (Topaz) Without Sim Louk
Hi Me has the trinity 3600 as a VPA GPS vodafone branding, and i get the same error message trying to run the bootloader and entering tricolor screen, ---> error 246 aber manually starting into bootlaoder and restatrting the romupdateutil.exe same error 260 no connention...
So you guys have a working version of the updating ?
And please remove all the links which are not working, linking a solve for the 246 problem, there are nomore links available...
thanks
Dome
I found a way to solve the problem 246 go in you mobile device, -->start -> settings-> connections ->USB to PC open this. Remove the hook @ Advanced networksettings activation! ---> click OK--> close
try again the bootloader etc, then on the tricolore reboot screen is shown USB in the lower white field and the bootloader can do its routine complete.
Have Fun with flashing the phones!
Testet with original German Vodafone available ROM " vpa_comp_gps_RUU_Trinity_VF_DE_1_23_162_4_6275_1_29_00_01_13000_108_Ship.exe "
testet with ZackMcRofls superfast german rom " RUU_Trinity_GER_1.23.162.2_GPS_v3f_by_ZakMcRofl "
testet with
" htcp3600_RUU_Trinity_HTC_GER_1-23-407-2_103_6275_1-38-00-11_108 "
First was Zack´s rom, 2nd. was Original Rom, 3. was Trinitys rom, after trxing all, i flashed Zacks Rom again, it was the best in my view.
Thank you verymuch, bb
@Senior-Members
i've one HTC Kaiser Phone, problem is when i make call then there is no problem fone works fine but as soon as i recieve call the fone restarts itself. everytime this happend when i recieve the calls i try to do hard reset and soft reset but problem is still same. any solution or help will be appriciated.
Take Care
ENJOY
Software Solutions said:
@Senior-Members
i've one HTC Kaiser Phone, problem is when i make call then there is no problem fone works fine but as soon as i recieve call the fone restarts itself. everytime this happend when i recieve the calls i try to do hard reset and soft reset but problem is still same. any solution or help will be appriciated.
Take Care
ENJOY
Click to expand...
Click to collapse
try radio 27.17
bouaroudj said:
try radio 27.17
Click to expand...
Click to collapse
can u give me instruction and link to download radio 27.17, i'll be very thankfull to u.
Take Care
ENJOY
LMFAO!!!
WTF going on w/ you? You regged an ID as "Software Solutions" and couldn't find a way to radio 27.17? May I suggest that you use the "search" feature?
Nghiem said:
LMFAO!!!
WTF going on w/ you? You regged an ID as "Software Solutions" and couldn't find a way to radio 27.17? May I suggest that you use the "search" feature?
Click to expand...
Click to collapse
sir , i did search before i posted and asked about the radio link. there is not need to be angry.
and software solutions is the name of my office i'm providing these solutions which i've and i'm also searching for new solutions. this is first time i face a problem like this , that outgoing is working fine but when there is incoming call the fone restarts.
Take Care
ENJOY
Software Solutions said:
sir , i did search before i posted and asked about the radio link. there is not need to be angry.
and software solutions is the name of my office i'm providing these solutions which i've and i'm also searching for new solutions. this is first time i face a problem like this , that outgoing is working fine but when there is incoming call the fone restarts.
Take Care
ENJOY
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=349375
bouaroudj said:
http://forum.xda-developers.com/showthread.php?t=349375
Click to expand...
Click to collapse
i downloaded the file " KAIS_Radinly_1.27.14.09_CustomRUU " from the link u gave me but it gives me error after going in boot mode then showing progress bar it gives error on 0% fones is working fine. i try to hard reset as well but still no luck can u give me steps how can i flash this radio to the fone.??? my fone is HTC Kaiser AT&T.
Take Care
ENJOY
Software Solutions said:
i downloaded the file " KAIS_Radinly_1.27.14.09_CustomRUU " from the link u gave me but it gives me error after going in boot mode then showing progress bar it gives error on 0% fones is working fine. i try to hard reset as well but still no luck can u give me steps how can i flash this radio to the fone.??? my fone is HTC Kaiser AT&T.
Take Care
ENJOY
Click to expand...
Click to collapse
You need to use radio 1.27.12.17
and you need to cid unlock your phone before flashing the radio :
http://forum.xda-developers.com/showthread.php?t=334679
Hi , guys , im sorry if there is another one thread like that , but i cant decide what the problem exactly is.
Ive ttrying to install new ROM but during the installation there was some fault , i dont know what is it and the installation couldnt go ahead and the phone didnt responding.
after that i try to restart the phone but the only thing he is doing is to load some tiny blue things, like its loading his bios , but not even more.
the display is staying like that and nothing happened
i think , i f****d up my phone but i hope there is still hope
any ideas whats wrong and how to fix that ?
thanks in advance
I also had this but i fixed it!
first install the normal HardSPL, without changing any files.
after that install the rom again
It will work now
Jurre
Well i dont know if someone still reads this part of the forum... but its my last hope
I have a cute nice old HTC Kaiser... i dont know the CID cause i got it from ebay.. and i said one day that maybe i should update the rom... and i did.. with the orange rom.. all went ok.. but i wanted to test android on the phone.. so i came to this great forum.. installed hard spl 3.34.. got the atool and tested some android builds... all went ok till one day when the phone restarted...
so now the issue:...
on the bootloader it says security unlocked,kais***, SPL-3.32.000(not 3.34.!!!), CPLD-8 if i insert the uspb cable it changes from serial to usb... but every rom i tried to install always gets me the 294 error incorrect vendor id.. and when i try to update the rom via sd card... it freezes on "Loading" screen.
now for the last 4 days +... i read the forum... and ..: most mtty commands are wrong... so i couldnt find my phone's CID... and all the links for the htc site that gets your serial number/imei and gives you the original rom are broken... and now im kind of ... sad...the only good part is that the android os is booting ok
so if anyone has any ideea for me pls tell me... im out of