HELP ME PLEASE - stuck in Android System Recovery <2e> screen - Captivate Q&A, Help & Troubleshooting

My bad mods, I should have posted here and not in the dev section....my problem below
So, I tried to put another kernel on my AT&T Captivate i9000 and it just bricked my phone. I read around for a while before I did it and thought I had the correct kernel for my captivate. For a minute I could get to the ClockworkMod Recovery menu by holding down the volume buttons and then going to download mode which is my ultimate goal.
I downloaded kernel-captivate-stock.tar.md5 which is the original kernel and I thought my Captivate would work, and boy was I wrong. I'm stuck on the Android system recovery <2e> screen with options reboot system now TRIED IT, reinstall packages TRIED IT, delete user data and delete cache data.
I have adb installed and I know how to use it but it's not recognizing my device when I'm in the correct folder and I have ALL the newest drivers. I thought it would be easier to do adb recovery download because at first it did recognize my device and now it won't, so I can't go the adb method. I turned off the device, took the battery out, the sim out and held down the volume keys plugged in the usb and I'm back to square one.
I also have Odin3 and also Odin One-Click Downloader downloaded. As for Odin3, I have the .pit file, the file for the PDA section, the PHONE, and the CSC section. I've looked at every single thing on the Internet today and I can't get my phone back into the download mode so I can flash it, it's stuck.
When I click reinstall packages I get the following error
"E: Error in /sdcard/update.zip
(Status 7)
Installation aborted.
E: Can't mount /dev/block/st111
(Invalid argument)
E: Can't mount /dev/block/st111
(Invalid argument).
I'm stuck on that screen and no matter how many times I hold down the vol. keys or do any combination, I'm still stuck there when the phones starts back up. Sorry for the long story but please help. I trust this community. help !!

If taking the battery out and then plugging in the USB cable and holding both volume buttons while inserting the battery doesn't work then you may need a jig. And in the future use the proper stock firmware so as not to disable your button combos (and use it sparingly, since flashing to stock is almost never necessary).

trae4nato said:
So, I tried to put another kernel on my AT&T Captivate i9000 and it just bricked my phone.
Click to expand...
Click to collapse
wait. do you have an i9000 or a captivate? there isnt a captivate i9000

the buttons work, the volume and power but i'm saying I'm stuck on that screen after I pick an option

captivate sir
Pirateghost said:
wait. do you have an i9000 or a captivate? there isnt a captivate i9000
Click to expand...
Click to collapse
I have a captivate. AT&T Captivate, my bad.

trae4nato said:
the buttons work, the volume and power but i'm saying I'm stuck on that screen after I pick an option
Click to expand...
Click to collapse
Sorry, I don't quite understand. Are you saying that once you're on the screen, you can scroll through the options but can't select anything with the power button? Or that selecting something just reboots your phone back into the recovery menu?

trae4nato said:
the buttons work, the volume and power but i'm saying I'm stuck on that screen after I pick an option
Click to expand...
Click to collapse
Are you sure power is working? I can't tell what you are saying, but it sounds like either the phone is freezing after you select something or the power button isn't working, preventing you from doing anything with the menu. The latter is a known issue with some kernels.

Related

[Q] Captivate With I9000 Firmware Stuck in Recovery Mode

There have been those that run into problems after installing the XXJP3I9000 update on the Samsung Captivate and attempt to reboot into recovery mode. The issue that they have is that since the Captivate has no physical home button to select an option like you can with the Galaxy S, you can't select an option, and therefore you can't reboot your device regularly. While I am in this same problem and have not figured out a solution, I have started this thread to post what knowledge I have about this issue so that others may help get this issue figured out. If anyone has information on how to fix this problem, please comment below. Let's fix this!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
First of all, the key combinations that standardly would work with the original captivate firmware will not work anymore. Pressing all three buttons (Vol+, Vol - and Power) will only power cycle the phone, that is, until you let up on the buttons. Pressing Vol+ and Vol- and then plugging your phone into the computer will also do nothing. (By nothing I mean will take you back to the recovery menu)
Every key combination will only take you back to the recovery menu, so key combinations seem to be out.
If you boot into recovery mode, take out the battery and put it back in, all the while keeping the phone plugged in to the computer, the phone will enter the "POWER RESET OR UNKNOWN UPLOAD MODE", which will show your device in windows as being a Samsung USB Composite Device and a Samsung Mobile Modem (gadget serial, Windows 7) While this may be helpful, you cannot run ODIN or ADB in this mode, nor does this allow disk access. If you have Samsung Kies installed, it will detect a device, but will never complete loading it.
Other information with this method: On the phone screen, as well as showing "POWER RESET OR UNKNOWN UPLOAD DEVICE" the screen will also show the following in red:
RST_STAT =0X1
PMIC_IRQ1 =0X0
PMIC_IRQ2 =0x0
PMIC_IRQ3 =0x4
PMIC_STATUS1 =0x40
PMIC_STATUS2 =0x2c
If this helps anybody, it was a pleasure
Another method I found briefly was that after installing Kies, and rebooting the phone into recovery mode (again) my computer detected four new devices, two of them being Samsung Android devices and one being a disk drive. Potentially, without freezing or error, the drivers that are included with the Kies software will detect and allow for disk management while the phone is in recovery mode. Three of the four devices installed without error for me, but the fourth, the actual Android device, continued to say "installing device" until I unplugged the phone out of frustration. It has since not detected those four devices again, and I have yet to figure out how to do that again. The nice thing about that was that although the adb.exe reboot download command did not work, adb.exe did detect the phone. if this is true then rebooting normally or into download mode should be easy.
The last thing I noticed is that button furthest to the left on the main screen on the captivate will close the recovery menu when pressed, and leave the background behind, and then will reopen the recovery menu when pressed again. This is showing me that the four touch buttons are operable, but not configured. If it were possible to reconfigure the actions that pressing these buttons do, then it would be easy to be able to reboot the device normally.
I have compiled information to the best of my ability, and here is a question to ask, that I think will help solve the problem. Can the captivate with I9000 2.2 software run adb in recovery mode?
Comments, Questions, and Most of all, answers would be appreciated for me, as well as for other users with the same problem as I. Hopefully, this thread can be the solving point for this problem.
Many Thanks,
TouchofDestiny
The n00b who isn't a n00b at all
An Update: The reason that the combinations don't work for me or either people is because they (and I) fail to install the captivate kernel, and that is making the volume power button controls useless.
same here i put froyo from the galaxy s i9000 and i cant change the rom or get into recoverymode because buttons dont work man this sucks and 3G or Edge doesnt work.....
You're problem is a little different. If you can't get into recovery mode, than that means you aren't in recovery mode, which means you can use ADB to enter download mode and use Odin to flash your phone. I have given up looking for a solution, and have sent my phone back to AT&T for a replacement. Since I'm still in my thirty day trial period, it doesn't matter if I used different firmware or not. Hopefully others won't get into the situation I had. For me, this thread is complete.
brandon9721 said:
same here i put froyo from the galaxy s i9000 and i cant change the rom or get into recoverymode because buttons dont work man this sucks and 3G or Edge doesnt work.....
Click to expand...
Click to collapse
hi,
I solved the same problem doing this:
start odin.
take out battery. plug in USB. press both volume buttons. insert battery while pressing those buttons.
Done. download mode should appear.
yep, same boat
I am in the same position here. I downloaded the froyo leak and installed it with odin, no problem there. Upon startup into froyo, all was good, except my phone was stuck in horizontal mode until I tilted it vertical, *then* it would go horizontal. So basically I am 90 degrees off kilter. I decided to look around for another rom to try, and in the process managed to get stuck in recovery mode. Couldn't tell ya what firmware I have, just what is on the endless recovery screen that I cannot get out of!
I have no external microSD card, only the SIM card, and no way to get it recognized on my XP or win 7 system.
Really, really stuck here, guys. I do have the androidsdk installed, if there is a way to get it to reboot. As it is, adb cannot see the device, so I am looking at a truly bricked phone.
And yes, this is a US phone, which is why the power button and home button are not mapped (I assume).
I am DESPERATE for some help here!
and while I am at it...
I WAS able to get into download mode with the shovel guy originally by using the 2 volume keys+power, usb (odin up), battery in, release power.
No more. No key combo works.
Totally bricked the Samsung, which is supposed to be impossible!
pkrouse said:
I WAS able to get into download mode with the shovel guy originally by using the 2 volume keys+power, usb (odin up), battery in, release power.
No more. No key combo works.
Totally bricked the Samsung, which is supposed to be impossible!
Click to expand...
Click to collapse
when you are on the i9000 rom the only button that will get you in download mode is the vol down
That's HUGE!
You, sir, are a gentleman, scholar, and all-round smart guy! How did I miss that? I coulda SWORN I was getting into download mode with both volume keys. I've never been so happy to see a little Dalek dude with a shovel in my LIFE. 2 minutes in the one-click installer and now I'm back in business!
Thanks for helping a terrified owner out, and preventing a trip to the AT&T store.
I cannot go to download mode
I have the same problem here. Stuck in the recovery mode after upgrade the froyo and had the orientation problem. How do you go into download mode or power reset or unknown upload mode? Any button combination doesnt seem to work for me.
How do I do?
Please HELP. I am struggling here
Thanks
xaga150 said:
I have the same problem here. Stuck in the recovery mode after upgrade the froyo and had the orientation problem. How do you go into download mode or power reset or unknown upload mode? Any button combination doesnt seem to work for me.
How do I do?
Please HELP. I am struggling here
Thanks
Click to expand...
Click to collapse
the key to the i9000 rom/kernel button combo is VOL DOWN + using the USB trick. do not press vol up + down, just the down while you are plugging in the usb cable
i too am stuck in recovery mode. the only way i can get into download mode is by using both volume buttons. just holding the down button just sends me to revoery mode as well. how can i fix my phone in download mode?
nevermind, reinstalled 2.2 and it works now.
Eureka I got it...I think
I installed froyo 2.2 i9000 on my captivate and got stuck in recovery mode...power button doesnt select and when I hold down the up and down vol buttons I couldnt get the downloading icon anymore either. Then I remembered something from another post....
Home + Vol Down + Power = Downloading Icon
It worked for me....let me know if this helped....I'm officially unbricked.
Hey. I'm in the same boat. My Captivate has I9000 firmware running it and it won't run properly. I can't access the settings to enable USB debugging in order to boot in either Recovery or Download using adb and no button combination works for me. I can't use button combos to boot into either Recovery or Download mode.
Does anybody have any idea what is going on and how to fix this?
JPBetley said:
Hey. I'm in the same boat. My Captivate has I9000 firmware running it and it won't run properly. I can't access the settings to enable USB debugging in order to boot in either Recovery or Download using adb and no button combination works for me. I can't use button combos to boot into either Recovery or Download mode.
Does anybody have any idea what is going on and how to fix this?
Click to expand...
Click to collapse
JPBentley-- Since the I9000 firmware is set to use physical buttons, and the Captivate doesn't contain any, once you get into recovery mode, you cannot get out. The standard Captivate key combinations to get into download mode do not work, as do the combinations to get into download mode via the I9000 firmware. Basically, you get to a dead end. Unless there is some way to flash the phone's ROM outside of download mode, which I doubt, your best bet is to return the phone for a replacement. After haggling around with AT&T for a while, they admitted that installing the I9000 ROM doesn't invalidate your warranty, so they should take it back. They did with mine, and now I'm running the official Froyo leak. Good luck with your new phone!
SOLUTION
For all those that are having this problem, Ive struggled with it & tried EVERY possible button combination & nothing worked.
The ONLY solutions I have found is to use a usb JIG. Take out the battery, sim card & sd card, plug in the Usb JIG & put the batter back in. Give it a couple of seconds & I'tll enter recovery mode without pushing any buttons. You dont even need to push the power button, it's that simple.
Here is an image of how to make one if you are electronically inclined, personally I am not so I found a local electronic parts store & they put on together for me.
1.bp.blogspot.com/_3KjgtwnRiWM/TNTyjkZGquI/AAAAAAAABL4/7NSmqrYmkmU/s640/i900.jpg
If you want, you can also buy one online, I cant post a link becuase Im a new member but just search for "samsung usb jig" on ebay.com & youll find plenty.
shop.ebay.com/?_from=R40&_trksid=p5197.m570.l1313&_nkw=samsung+usb+jig&_sacat=See-All-Categories
yes, i think you need to build a jig or buy one online if you want to play with custom rom. you may not need it now, but you may need it just in case.
http://cgi.ebay.com/ws/eBayISAPI.dl...47234&ssPageName=STRK:MESELX:IT#ht_511wt_1139
agustinpac said:
hi,
I solved the same problem doing this:
start odin.
take out battery. plug in USB. press both volume buttons. insert battery while pressing those buttons.
Done. download mode should appear.
Click to expand...
Click to collapse
OMG you saved my life
thx so much for your post
I have the same problem, i can get into recovery mode. I can also get to download mode but Odin doesnt see my phone and neither does adb. By pulling the battery with no buttons pushed it goes straight into recovery mode. Looks like I have a brick now. If anybody has any suggestions please let me know.
drowe24 said:
I have the same problem, i can get into recovery mode. I can also get to download mode but Odin doesnt see my phone and neither does adb. By pulling the battery with no buttons pushed it goes straight into recovery mode. Looks like I have a brick now. If anybody has any suggestions please let me know.
Click to expand...
Click to collapse
That's not even close to a brick. Are you using a usb port closest to the motherboard on your pc? Is your cable good? Make or buy a jig, that will put your phone into download mode.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro

Need Help with My Bricked Phone!!! Urgent!

Hey Guys I know there a lot of threads like the one I am about to start up but those do not apply to what I have done to my phone.
So to start off I know I do not have a lot of posts but that is because I usually find all of the information that I need by reading through the forums. I have experience with flashing various roms onto my captivate. Today I decided I would try out an I9000 rom on my Captivate. I was following the instructions provided by this link
http://forum.xda-developers.com/showthread.php?t=791366
I downloaded the files that the poster said to download. I got to step 2 where I flashed the JM8 PDA. I think this is where I messed up because I after I did this my phone boots directly into recovery and spits some information out. Which is the following (this is the text under the recovery menu options):
update media, please wait ...
update media, finished
# MANUAL MODE #
-- Appling Multi-CSC...
Installing Multi-CSC
mps_dat value: ATT
copy_multi_carrier from: ATT
multicsc : can not access to /system/csc/ATT/system/
copy_common_data
Thats the end of the information spit out by the recovery menu. My problem is that since I flashed some version of the I9000 kernel there is no way for me to enter the download menu so I can restore back to stock. Please Please guys I really need the communities help with this. I am screwed if I take the phone to AT&T because when the phone boots it has the I9000 splash screen that says galaxy s phone gt i9000.
The help will be greatly appreciated and I might even make a donation to the person that can help me!
Yank out battery, close Odin, Remove USB
Open Odin
Insert Battery
Hold Volume down (NO POWER)
Plug in USB
Phone should go into download mode - Start flash
Hey zilch I have tired that as well and I just keep going into the same recovery menu as before. Do you think it might be the fact that I do not have the galaxy s drivers on my computer???
If you can't get into download mode with the button combos (hell, I couldn't) you should still be able to use adb to reboot into download mode. So:
Plug in usb
Open Odin
type from a console in the android sdk tools directory "adb reboot download"
Use odin when you get into the download mode.
Also, Zilch, you've helped me out before, you're the man.
abezapata said:
Hey zilch I have tired that as well and I just keep going into the same recovery menu as before. Do you think it might be the fact that I do not have the galaxy s drivers on my computer???
Click to expand...
Click to collapse
You dont need separate drivers if you had the Captivate ones installed... it should work either way, but if you have no drivers at all, that could be an issue
Edit: If it's plugged into USB and you didnt hit power it shouldn't power on the phone to go into recovery menu... if you did the button combo wrong it should just show the battery
No i do have the captivate drivers installed. I was coming from cognition so maybe that is a problem??? I am really open to any suggestions!
abezapata said:
No i do have the captivate drivers installed. I was coming from cognition so maybe that is a problem??? I am really open to any suggestions!
Click to expand...
Click to collapse
Install the drivers!
I meant I do have the Captivate drivers installed but when the phone turns on and enters recovery mode my computer (windows 7 x64) notifies me it is searching for drivers and then fails.
To get into download mode:
1. Remove Battery, SIM, SD
2. Open Odin
3. hold volume up + down buttons
4. While holding them down, put the battery
5. still holding them(buttons) down, plug the usb cable.
Phone should go to download mode and Odin should detect it.
Zilch25 said:
You dont need separate drivers if you had the Captivate ones installed... it should work either way, but if you have no drivers at all, that could be an issue
Edit: If it's plugged into USB and you didnt hit power it shouldn't power on the phone to go into recovery menu... if you did the button combo wrong it should just show the battery
Click to expand...
Click to collapse
When I plug in the phone it shows the batter and the loading bars for a couple of seconds and then automatically enters the recovery menu. I have not touched any of the buttons the whole time this happens.
abezapata said:
When I plug in the phone it shows the batter and the loading bars for a couple of seconds and then automatically enters the recovery menu. I have not touched any of the buttons the whole time this happens.
Click to expand...
Click to collapse
So if you unplug the phone from USB while it's off, then hold volume down, and plug in USB nothing happens or does it do the battery thing?
Okay so through some miracle of god I got the adb to detect the phone and I sent it into download mode but odin wasnt open and now I am getting the mobile phone image/ warning image/ pc image!
abezapata said:
Okay so through some miracle of god I got the adb to detect the phone and I sent it into download mode but odin wasnt open and now I am getting the mobile phone image/ warning image/ pc image!
Click to expand...
Click to collapse
From that screen if you can't get your button combos to work you're pretty much toast =/
You can try:
USB
Unplug battery
Plug in battery
Hold both volume buttons + power
keep holding the buttons, the screen will turn off, then turn back on
As soon as the screen goes black again, release the power button and hope that you get the android digger
MY PHONE IS FIXED!!!!!!!!!!!! I think what did the trick is I installed Samsung Kies and that gave me all of the drivers for the samsung phone thus giving me the ability to use adb in recovery. Thanks guys! Your'e post encouraged me to keep trying and not cuddle up in the fetal position crying myself to sleep!
Zilch25 said:
From that screen if you can't get your button combos to work you're pretty much toast =/
You can try:
USB
Unplug battery
Plug in battery
Hold both volume buttons + power
keep holding the buttons, the screen will turn off, then turn back on
As soon as the screen goes black again, release the power button and hope that you get the android digger
Click to expand...
Click to collapse
Yeah thanks man once I saw those icons I knew I was good because I have seen them before. Thanks for the help!
abezapata said:
Yeah thanks man once I saw those icons I knew I was good because I have seen them before. Thanks for the help!
Click to expand...
Click to collapse
Whew... well I'm glad you got it back, we've had so many perma-fails lately with the OTA these days it's nice to see a miraculous recovery Improves morale around here!
this thread just saved my life. thank you to everyone that contributed
For future reference, since the button combos are different on the i9000 vs. the Captivate, I've found that I get into download mode every time on an i9000 ROM by yanking the battery, and then re-inserting it while holding volume down+power. I know you already got it resolved, but just keep that in mind, as it has never failed me. Only wish I knew about that combo back during the whole JPC fiasco!

[Q] HELP ME PLEASE - stuck in Android System Recovery <2e> screen

So, I tried to put another kernel on my AT&T Captivate i9000 and it just bricked my phone. I read around for a while before I did it and thought I had the correct kernel for my captivate. For a minute I could get to the ClockworkMod Recovery menu by holding down the volume buttons and then going to download mode which is my ultimate goal.
I downloaded kernel-captivate-stock.tar.md5 which is the original kernel and I thought my Captivate would work, and boy was I wrong. I'm stuck on the Android system recovery <2e> screen with options reboot system now TRIED IT, reinstall packages TRIED IT, delete user data and delete cache data.
I have adb installed and I know how to use it but it's not recognizing my device when I'm in the correct folder and I have ALL the newest drivers. I thought it would be easier to do adb recovery download because at first it did recognize my device and now it won't, so I can't go the adb method. I turned off the device, took the battery out, the sim out and held down the volume keys plugged in the usb and I'm back to square one.
I also have Odin3 and also Odin One-Click Downloader downloaded. As for Odin3, I have the .pit file, the file for the PDA section, the PHONE, and the CSC section. I've looked at every single thing on the Internet today and I can't get my phone back into the download mode so I can flash it, it's stuck.
When I click reinstall packages I get the following error
"E: Error in /sdcard/update.zip
(Status 7)
Installation aborted.
E: Can't mount /dev/block/st111
(Invalid argument)
E: Can't mount /dev/block/st111
(Invalid argument).
I'm stuck on that screen and no matter how many times I hold down the vol. keys or do any combination, I'm still stuck there when the phones starts back up. Sorry for the long story but please help. I trust this community. help !!
trae4nato said:
I'm stuck on that screen and no matter how many times I hold down the vol. keys or do any combination, I'm still stuck there when the phones starts back up. Sorry for the long story but please help. I trust this community. help !!
Click to expand...
Click to collapse
Have you tried:
Pull USB cable.
Open JF6 ODEN install I897UCJF6-final-OCD-REV0
Pull Battery
Put usb in
While holding both volume up/down insert battery
It should go into download.
Start Oden and the after reboot
Pull usb
select USB development
Reconnect usb
Master clear.
-- It has worked for me.
Hold Volume Down, Home, and Power on. Turn on odin(or heimdall), plug usb in phone, and then in computer. Correct order or you get spanked.
Also, if you download DG's stock odin package it only works once for me, after that i have to re-download it.
FTR: use Neldar's kernel flashing app, it works wonders.
Also, if you use odin and it fails you have to close odin, then re-open it. Same for Download mode, you can't flash 2 packages. Just use DG's One-Click, you have corrupted /data or /dbdata, whichever contains block st111.

[Q] Stuck in recovery <3e>

During attempting to flash my phone with this rom http://forum.xda-developers.com/showthread.php?t=1055622 Using Odin... It stopped in the middle of the process.. I attempted to re-enter Download mode but it keeps looping back into Android Recovery Mode.. No mattery what I do it just goes back into recovery mode.. It shows a bunch of info in red about E: not being able to mount or copy anything... and also has the following in YELLOW
Media Files Copy failed
# MANUAL MODE #
--applying Multi-CSC...
Installing Multi-CSC
Can't access to "/system/csc/att/system'.
Successfully applied multi-CSC
Thats pretty much all I see.
If someone can help me solve this issue I would really appreciate it
Did you go through the installation steps provided in the OP.
To get to download mode press Power+vol down or when phone is switched off insert usb while pressing ONLY vol down.
anishmahadikz said:
Did you go through the installation steps provided in the OP.
To get to download mode press Power+vol down or when phone is switched off insert usb while pressing ONLY vol down.
Click to expand...
Click to collapse
No it didnt finish the install process. I follow the steps correctly to get to download mode but it just sends me back to recovery mode
ahmada said:
No it didnt finish the install process. I follow the steps correctly to get to download mode but it just sends me back to recovery mode
Click to expand...
Click to collapse
can you please elaborate the steps, were you able to flash stock gb.
This very same thing happened to me... I finally started over from scratch, ie back to stock, odin for bootloaders, ect, and was finally able to flash GB.
anishmahadikz said:
can you please elaborate the steps, were you able to flash stock gb.
Click to expand...
Click to collapse
No it didn't finish. It showed the progress bar at approximatEly 10% for a few minutes and then it rebooted the phone and Odin Showed it as failed.
FridayJ said:
This very same thing happened to me... I finally started over from scratch, ie back to stock, odin for bootloaders, ect, and was finally able to flash GB.
Click to expand...
Click to collapse
But doesn't that require putting the phone into download mode? That is the step that isn't working for me.
ahmada said:
But doesn't that require putting the phone into download mode? That is the step that isn't working for me.
Click to expand...
Click to collapse
Try this, remove battery insert back, press both vol up+down and while pressing insert usb
anishmahadikz said:
Try this, remove battery insert back, press both vol up+down and while pressing insert usb
Click to expand...
Click to collapse
I appreciate ur help but ur stating the obvious and it isn't working. I know I need to put the phone into download mode but like I stated before; it's not letting me do that.
Micro usb jig...odin one click.
post questions in the q&a subforum...this is not development whatsoever.
ahmada said:
During attempting to flash my phone with this rom http://forum.xda-developers.com/showthread.php?t=1055622 Using Odin... It stopped in the middle of the process.. I attempted to re-enter Download mode but it keeps looping back into Android Recovery Mode.. No mattery what I do it just goes back into recovery mode.. It shows a bunch of info in red about E: not being able to mount or copy anything... and also has the following in YELLOW
Media Files Copy failed
# MANUAL MODE #
--applying Multi-CSC...
Installing Multi-CSC
Can't access to "/system/csc/att/system'.
Successfully applied multi-CSC
Thats pretty much all I see.
If someone can help me solve this issue I would really appreciate it
Click to expand...
Click to collapse
I am guessing you were able to flash the GB bootloaders. Try the GB bootloader combination to get into download mode
ahmada said:
I appreciate ur help but ur stating the obvious and it isn't working. I know I need to put the phone into download mode but like I stated before; it's not letting me do that.
Click to expand...
Click to collapse
Sorry that's all i can do to help, i don't know what you mean by this 'it's not letting me do that', is it a blank screen or is it rebooting to recovery again.
try different button combos, if nothing helps get a jig or if you can make 1 yourself there are lots of videos on youtube explaining that.
watsaa said:
I am guessing you were able to flash the GB bootloaders. Try the GB bootloader combination to get into download mode
Click to expand...
Click to collapse
I told him to do it in the 2nd post of the thread, but i guess it's not working for him.
anishmahadikz said:
I told him to do it in the 2nd post of the thread, but i guess it's not working for him.
Click to expand...
Click to collapse
Ur right Its not working..
What is a microusb jig one-click odin?
Should I just go to an AT&T store and swap the phone because it is still within coverage?
ahmada said:
Ur right Its not working..
What is a microusb jig one-click odin?
Should I just go to an AT&T store and swap the phone because it is still within coverage?
Click to expand...
Click to collapse
jig is just 3 parallel 100k resistors connected together with a mini usb, just plug it in the usb port of your phone (REMOVE BATTERY) and you will get to download mode. mobiletechvideos.com sells it, or as i said before if you can, make it yourself.
you can get resistors and mini usb in any radioshack.
If at&t replaces your phone nothing like it
http://www.youtube.com/watch?v=Rdn5GoRjhn0 this is a jig...if you cant manage to make it he sells them for like 8 bucks.
http://www.youtube.com/watch?v=UDtxnH4lFuk
thats how to use odin one click.
you REALLY should have known what both of these were before you ever touched your phone.
studacris said:
http://www.youtube.com/watch?v=Rdn5GoRjhn0 this is a jig...if you cant manage to make it he sells them for like 8 bucks.
http://www.youtube.com/watch?v=UDtxnH4lFuk
thats how to use odin one click.
you REALLY should have known what both of these were before you ever touched your phone.
Click to expand...
Click to collapse
This is actually the 4th rom I've installed on this phone and usually everything goes smoothly. I really wasnt expecting something like this to happen... But now I learned my lesson. I appreciate everybody's help.
General rule of thumb for...well life in general really:
Expect and plan for the worst.
Celebrate when things go right!
try ALL the combos for download mode... I have a feeling you CAN get into download mode but haven't tried all the combos. Not to state the Obvious
The three most common combos are
volume up + volume down
volume down + power
volume down + home + power

[q] help w/ captivate????

ok guys i'm definitely a noob at this but i think i messed up this morning downloading the gb drivers for my captivate. i was running serendipity 6.4 and i was trying to flash serendipity VII. i didn't flash back to stock 2.1 eclair with odin one click before i followed the instructions on downloading the new drivers for the gb. i went to the power menu on the 6.4 and hit download mode and plugged in the usb. it went halfway through the downloading process and stopped. my screen was blank without the downloading sign anymore and on odin it was at a halt. i waited for about 45 minutes for it to proceed and nothing so i unplugged it. when i did the factory recovery screen came up and i could use the volume up and down buttons to scroll through the menu choices but it wouldn't let me use the power button to make a selection at all like the power button wasn't working. i pulled the battery and put it back in after a while and now all i get is the galaxy s gt-i9000 samsung screen and nothing else. it wont let me back into recovery or download mode no matter what button combo i try. did i brick my phone and is there a way for me to fix this without having to buy another one? any help would be greatly appreciated.( guys, i realized i messed up shortly after it was done and messed up that i should've odin one clicked it back to factory before i did this,but by that time it was too late.)
When a problem comes along, you must jig it!
You might want to look into buying/making a jig to get you to a place where you can repair your phone.
ok guys,the phone will let me get back into the recovery menu and but won't let me make a selection out of the menu with the power button and i still get the galaxy s screen but nothing else.
Please use more descriptive thread titles. Your title is useless to anyone doing a search.
440hsp said:
ok guys,the phone will let me get back into the recovery menu and but won't let me make a selection out of the menu with the power button and i still get the galaxy s screen but nothing else.
Click to expand...
Click to collapse
Could you please quote/reply to these steps to getting into download mode?
From powered-off state, Hold V+/V-, insert USB cable
With battery out, Hold V+/V-, insert USB cable
From powered-off state, Hold V-, press & hold power button
If you haven't tried this combo yet, try using the home softkey in place of the power button with some of these combos - there have been reports of the power button getting remapped to the home softkey.
i apologize for the wrong topic but i have tried every way possible that is listed on xda and other forums to get into download mode with no luck. the only way i could is from the menu's on the roms that i had flashed before( cognition 4.5.3 and serendipity 6.4). i got it to work one time with the hold the vol. up and down buttons and the power button and inserting the battery and it never worked again. all i get is the charging symbol now,the galaxy s screen, or recovery screen. i did get it back into recovery and i tried the home soft button and nothing. then i hit the menu soft button and now it shows the android man and the exclamation point in the triangle. what can i do guys???
440hsp said:
i apologize for the wrong topic but i have tried every way possible that is listed on xda and other forums to get into download mode with no luck. the only way i could is from the menu's on the roms that i had flashed before( cognition 4.5.3 and serendipity 6.4). i got it to work one time with the hold the vol. up and down buttons and the power button and inserting the battery and it never worked again. all i get is the charging symbol now,the galaxy s screen, or recovery screen. i did get it back into recovery and i tried the home soft button and nothing. then i hit the menu soft button and now it shows the android man and the exclamation point in the triangle. what can i do guys???
Click to expand...
Click to collapse
Just out of curiosity, when you're at the android man/exclamation screen, if you have odin up already and plug in the phone, does it recognize that the phone's attached?
If so, you might be able to use the odin one-click to get back to stock eclair.
i will try that and get back to you. hopefully it will work.
no sir. i plugged it in and the computer lets me know that i plugged in the usb but nothing registers on odin or the phone.
440hsp said:
no sir. i plugged it in and the computer lets me know that i plugged in the usb but nothing registers on odin or the phone.
Click to expand...
Click to collapse
Hmm... I've reached the end of things I know to say to try. I'm assuming you've tried changing which port you're plugging your phone into on the computer?
Also, have you tried using adb to reboot to download? If not, get adb and use the "adb reboot download" command (I think...) to see if that gets you there. You may need to be in the recovery menu (if you can get back there), or the exclamation point / android guy might work, too.
Although, if you can get back to recovery, you might be able to mount your phone to the computer, drop a copy of CWM on there and reinstall that so you can have more options available to you.
Your best bet at this point might be to buy or build a jig. That should hopefully make the phone go into download mode so that you can get to where you need to be.
ok, now i'm a little confused. i've been sitting here with my phone in my pocket not messing with it. i pull it out of my pocket and it was off. i held the down volume button and the power button at the same time and it immediately started showing download mode. now i'm not near my computer with odin on it to flash it back to stock. lolol. this is depressing. now all i can hope is i can make it back to my computer before my battery runs out. i say this because my phone has always been hard to use the button combos to get it into download mode.
if i can get odin to flash it back to stock,i'll master clear it. question is should i root it again before flashing the GB bootloaders to install serendipity VII?
440hsp said:
if i can get odin to flash it back to stock,i'll master clear it. question is should i root it again before flashing the GB bootloaders to install serendipity VII?
Click to expand...
Click to collapse
Nope, root isn't needed to flash that ROM.
440hsp said:
ok, now i'm a little confused. i've been sitting here with my phone in my pocket not messing with it. i pull it out of my pocket and it was off. i held the down volume button and the power button at the same time and it immediately started showing download mode. now i'm not near my computer with odin on it to flash it back to stock. lolol. this is depressing. now all i can hope is i can make it back to my computer before my battery runs out. i say this because my phone has always been hard to use the button combos to get it into download mode.
Click to expand...
Click to collapse
Good to hear there's a glimmer of hope. If you do manage to get there, you might want to make an EFS backup before moving any further, just so you have one more tool in your arsenal of preventing phone problems.
After reading this whole thread I think your problem is that you now have gingerbread bootoaders and your button combos have changed and you don't know it.
Sent from my SAMSUNG-SGH-I897
i think you may be right about having the GB bootloaders. now first question is how to i manage to make an efs back up? secondly, if i have the GB bootloaders then what do i do to flash the complete serendiptiy VII onto the phone? the reason why i ask is because the phone just quit downloading the flash in the middle of the download and that's when all hell broke loose. lolol. but you guys are right. i might just have a glimmer of hope.
If you do have the GB bootloaders, you should (theoretically) be able to get to download mode with the volume - & power button combination. This may take a little fiddling to find a timing after you've started the phone to find out when you can get to it.
As far as flashing Serendipity, you could try, but my advice would be to try and get to stock Eclair first and then go forwards. You're in a place with a lot of variables, and stock Eclair would be as variable-free as you're likely to get.
As far as backing up the EFS, under the CWM recovery menu, there's an option to make a nandroid backup. That's step 1. Once you've made the backup, just copy it from the clockworkmod folder to a safe place.
well i've got an update now. got everything back to factory 2.1 eclair and then i did a master reset in the phone because now i can't get into the recovery menu or the download menu and one click root will not work on my phone now at all. it keeps saying failed.
440hsp said:
well i've got an update now. got everything back to factory 2.1 eclair and then i did a master reset in the phone because now i can't get into the recovery menu or the download menu and one click root will not work on my phone now at all. it keeps saying failed.
Click to expand...
Click to collapse
--------------------> delete
+1 on the jig...odin is very finicky and a jig will get you to download mode when you need it most...
buy or make one...worth every penny.

Categories

Resources