No signal after kernel upgrade? - Galaxy S I9000 Q&A, Help & Troubleshooting

I flashed a new kernel through Odin, after the reboot, there was no signal.
This also happens for all other kernels I flashed after that.
The signal would only appear if I used a ROM without a flashing a different kernel.
Any idea why?
On a side note, I'm still getting previous ROM stuff ( Apps, data, wallpapers ) even after I repartioned everything and reverted back to stock. Any idea why too?

No signal = not set up APN for network .
jje

Related

Strange problems after CM7 RC2 GB flash

thought id try out GB but after flashing i started getting 3g/H problems where as i couldn't get a signal but could use 2g
so after reverting back to my nand back-up which was the latest MIUI rom but no i still have the same problem which is no 3G.
so after that i did a full wipe along with SD card format and did a fresh install of the MIUI rom but the problem is still there no 3g or internet...
currently on
RA v2.2.1 recovery
5.08.00.04 radio
stock kernel
any ideas guys?
Are you connecting to the correct cell network? And are your APN settings correct for internet access?
checked but nothing has changed
deleted,reset and tried manually entering but nothing so far, been searching around but haven't really found a solution

[Q] Need help connecting to data!

Im new to flashing roms, so bare with me. I flashed my first rom last week, using Andromeda3 and Ursa Minor #2 kernel, everything worked great except, i couldnt connect to 3G/H, even though it showed up on notification bar, tried looking for answers, i ended up flashing different modems to no avail. So, i flashed back to stock eclair, used kies mini to upgrade to Froyo 2.2 UCKB1, Data worked. I then flashed UCKB2 rom, data didnt worked) i tried wiping cache and all that, still no data connection, btw, wfi worked. So i flashed back to UCKB1, again, everything worked perfectly. The other day, i flashed Fusion XI and GB bootloaders, i must say i like this rom very much, but again still couldnt connect to 3G/H, everything else worked, although i havent tested the GPS yet, i am getting amazing DL/UL speeds through wifi. Anyway, i searched XDA for any answers i could find and pretty much tried them all, seems like only KB1 3G will work, but any custom rom out there, data hasnt worked even though i see it in notification area, i'd use market and browser, but would say could not connect. Am i doing something wrong/ missing a step?? I really like Fusion XI and dont want to flash back to stock. Any help would be appreciated.
Didnt know where else to post this, seems like other people dont have the data connection issue :/
That's weird.
Try flashing the kb1 modem on fusion.
I did try flashing the KB1 modem, but that too, didnt work. it only works if i go back to stock KB1 for some reason.
where do you live? what Carrier are you with?
have you checked your APN settings?
fill in your location and carrier/ device info in your signature/ xda user information.
I Live in Southeastern Pennsylvania. And currently have AT&T as my carrier. I tried APN settings, but not sure what to set it too, i have used APN Manager from the Market.
Try resetting ur apn settings to default. Then reboot.
Sent by XDA Premium App
how do u reset apn settings?
Settings, wireless and networks, mobile networks, access point names. Now hit the menu key and reset default apn well be on the bottom left...
Ok, tried that, still a no go connecting to data. I just flashed stock 2.1 then 2.2 update through Kies mini, i no longer have data connection even on official stock roms could this be a hardware issue??? gps sucks. ran a gps test using the app from market. other than that, everything else is working. what did i do wrong?

[Q] unable to get data connection

Hi guys,
I'm being annoyed by my SGS about his data connection. Hope someone could help me!
Few days ago I flashed MIUI Mintberry 2.1.20 and everything was working like a charm, but this morning data connection switch failed several times.
I've tried to wipe everything, re-flash Mintberry and even to flash JVU stock with Odin, but I still can't switch on my data connection.
I can't even see any icon on the status bar.
Any idea? Is my phone broken?
kpaolo said:
Hi guys,
I'm being annoyed by my SGS about his data connection. Hope someone could help me!
Few days ago I flashed MIUI Mintberry 2.1.20 and everything was working like a charm, but this morning data connection switch failed several times.
I've tried to wipe everything, re-flash Mintberry and even to flash JVU stock with Odin, but I still can't switch on my data connection.
I can't even see any icon on the status bar.
Any idea? Is my phone broken?
Click to expand...
Click to collapse
Hmm this is strange, so you turned data on but theres no symbol, right? Have you tried installing another kernel (maybe also applying the Kernel Cleaning Script)?
I' ve tried everything with Odin, and at the moment I have a beautiful black screen of death.
Odin cannot recognize my phone... I'm very frustrated
EDIT: Upgrading Kies'drivers, I managed to connect the phone with Odin again, so I've flashed the lastest official stock firmware to check my antennas. In the worst case, I'll be able to go to the shop for assistance without problems.
Have u tried typin ur apn maually?
Sent from my GT-I9000 using xda premium
Sounds like a settings issue. Never heard of anyone have this problem before - I've flashed every version of mintberry including betas.
I just had this issue
I just had this and figured out what is wrong, its a easy fix too! Just go to settings and wireless and change the access point for your mobile connection. I had 2 access points and just switched it to the other one and my data started working again!
Hope I could help
Hi guys! thank you for all these answers!
I've tried to set APN manually, to change custom ROM and custom kernels and coming back to stock too, but still no data connection icon (neither data connection itself).
At the moment, I'm on JVO, the latest official italian firmware, everything is fine but 3g data connection.
Other ideas? Shall i need of Samsung customer service (I hope no!)?
Solved...
MIUI default settings fault: SMS notification has ran out my money and my provider has blocked 3g connection.
My phone is safe!

[Q] Bootloop, can't edit APN and random reset problem

I have a problem with this phone. I got it locked to a network so i rooted it and changed bootloader to new bootloader and instaled kowalski kernel ((alpha) now I'm on M1 and the problems are still here)), after that I tried many different ROMs but I get the same problem all the time. First problem is that my phone finds a network and I can recieve calls and messages but no data connection and I can't save an APN (I fill in everything and when I click save it just brings me to APN settings without the APN iI tried to create. Second is the random reboots, it just happens when I do stuff (doesn't matter what). And the last is bootloop which happens and then I leave it just to turn it on later without problems.
Could you please help me and tell me what kernel, ROM, bootloader, baseband and everything to install to make it work. I don't care about the data that will get erased. I just want it to work (even on stock ROM and kernel which I can't find) THANK YOU IN ADVANCE GUYS

Signal drop

while on custom roms after 10-15 minutes of booting up the signaofl sim1l drops and hd(volte) icon is gone but on the ui it shows full signal and when i open settings there is no option to search signals can'tuse volte and stuff had to reboot and same problem occurs after 10-15 minutes
while on stock/stock based roms the signal or sim2 drops and in ui its also shown and it come back after a while
treid nougat roms , freedom os , stock , sultan cm13 , custom kernels still same problem occurs tried using different firmware , and also tried to restore efs of stock based rom on custom roms but it broke the dialer i.e call doesn't connects
please help me can't use nougat as daily driver
sorry for my bad English
on freedom 1.7

Categories

Resources