[Q] No sound when charging or USB connected - Tilt, TyTN II, MDA Vario III General

Hi there!!
Thanks first of all for the great support you give around!! This is a very nice forum!!
I just flashed my Kaiser with this configuration:
T.I.R. v18K_D3D
ROM 3.65.65.10 ITA
Data ROM 10/12/2009
Radio 1.72.09.01
Protocollo 25.75.40.03.eMoW
The problem is that i get no sound at all when I'm charging it or it is connected to the USB.
Does anyone knows how to fix this bug??
Thanks!

i don't recall hearing a sound from my Kaiser when I plug in the USB cable...
did you check your settings to see if it's possible to assign a certain sound to the specfic "charge phone" action?
Otherwise you could try another rom (perhaps 1.71.09.01?) and see if that works.

Related

Diamond stalls after awhile when connected to car radio

Hi all, I want to use my Diamond as a USB stick to connect to my car radio, wich has an USB port. When I connect as diskdrive it seems to work fine, I can play songs from the 4GB internal mem. But when I leave a song on for a few minutes, it seems to lose connection, and then I need to unplug the USB to get it to work again. Ofcourse it doesn't continue where it left off, so it's pretty annoying. A friend of mine who has a Diamond and a USB car radio has the same problem. Does this sound familiar to anyone, and is there a fix for this? Many thanks.
did anyone find a solution for this?

Xperia Usb Connection and Charging Problem...

Hai..
iam new bie, i just newly purchased xperia xli. after using 4 month, iam now facing some problem, every time if i need to charge or connection for active sync i need to restart, and this repeats every time. and if i try to open task manager or Device information in settings it will give an error
"cannot open 'ctlpnl'. A critical conponent is either missing or cannot start because program memory is unavailable. Tap start> settings > system tab> task manager, stop programs that did not automatically stop and try again".
and i cannot even make screen off by pressing power button for that also i need to restart.
So please give me some information regarding this so that i can solve this problem.
Thank you
I would hardreset it
Thanks for reply
I had done it already, after hard reset first time i can charge and connect to active sync also, and if i disconnect it and try another time it wont work, again i have to hard reset to charge or to connect it to active sync. so pls give me solution for this,
for more information i will provide my device information
software version: R3AA003
ROM VERSION: 1.05.931.3 WWE
MODEL : XLI
xperia usb connection problem
i see no one is taking this matter seriously
i have googled for the past 4 weeks and it seams many people are having this problem with xperia/wm6 devices - its just that not many of them understand the problem and know how to express themselves (e.g. many belive it's a problem with the pc's usb ports)
i would suggest does interested in IT mysteries and things like that to look into this one. i can explain the problem here:
I've used xperia/windows mobile 6 device for about 6 months, syncing it daily or semi daily (or weekly..) all that time via USB connection and active sync installed on winxp.
one day i plugged the usb cord into my phone and - nothing. the phone has started charging as thou it's connected to a charger and not to a PC - one of the first things i noticed cause i specifically always have the "don't charge the device while connected to a pc" box ticked on.
what is very important to know is that NOTHING of the following didn't fix this problem:
changing cords
changing ports
changing pc's
soft reset via button on the back
hard reset
nudging the cable
usb hub pc connection
direct pc connection
updating windows mobile
toggling ANY option in the OS itself
charging/discharging the device
changing the chargin cable, then connecting
leaving it off without a battery for a long period of time (12+ hours)
---------all other idiotic suggestions that are being written all over the net by dumb asses who think they can shoot a guess and come of as smart guys---------
bear in mind that this happened after absolutely no physical damage to the device or any kind of extreme working conditions, exceeded cpu/memory use etc.
it would be great if someone could solve this mystery. activesync is still working via Bluetooth but it's just stupid to transfer files over the slow bluetooth connection whilst having a USB connection as one of the greatest advantages of this kind of a device
i kindly thank in advance to anyone having some kind of an idea about how it's possible for a USB connection to just stop working, for absolutely no reason.
bye&cheers!
Matija
Anyone has the solution for this problem? Like Matija said, it happened suddenly for no reason... My x1 has been facing this problem for 3 weeks
I cannot update my phone via my PC
I recently having problem with my X1 syncing with my home PC and charging from my Laptop
Now I found out that, those mini USB cable might be good enough to charge the phone, or even trying to sync, but then it gets error more and more often. So try getting some better quality cables (ie. those with "Magnetic Shield" near the end), see if that fix the problem
good luck
Flash another ROM?
rickysio said:
Flash another ROM?
Click to expand...
Click to collapse
I have done flash newest ROM by sd method... yet it's still not working
Changing the cable is the first thing I've ever done
up on this thread...
it's been sometime, I am having the same problem, tried all the above in vain..
any solutions?
Having the same problem here.. I faced it after I formatted it by clicking on (Clear Storage) under System tab.

Using usb port of car audio

Hi all,
I'm searching for the most ideal situating to play the music from my phone in my car.
My new idea was to use a car hifi system that has a USB port, the advantage of this is that I only have to connect 1 cable.
And when that's done, it automatically charges..
And I hope that the car player has good control for exporing the files on my SD card..
My question is, before ordering one, does it work good? Does someone have bad experience's with this?
Working slow, bad control of your audio files? Tips suggestions?
I had a car radio which had sd and usb input
if the device is set to usb storage mode then it should act
as a usbStick would and the radio would have
access to anything on the sdcard
it worked ok for me with normal sdcards but it was stolen before
i tried using it with my phone
The optimal setup is a bluetooth A2dp one, so that you never even need to take the phone out of your pocket. Use MS Voice Command, and you can even seek your tracks by voice.
As for USB, it won't work, unless you have a custom ROM with the HTC Mass Storage option.
are you sure mine comes with the option to work as mass storage under usb to pc in settings
but of cause haven't tried it with a car radio but it sure works as a usbstick in computers
First off al, in the standard roms, there is a option under connections, where you can switch from activesync to mass storage..
Bluethooth audio will be not as good as the original output of the phone, and, my most important thing, it won't charge..
But, i just orderd a very cheap radio with usb and a aux input..
( elta 7527 )
Will let you guys know when it's installed..
Yes, Xperia comes with Mass Storage option and many cabs available if your ROM doesn't have it.
I got a head unit with USB and as long as set as mass storage it's just like an SD card. For simplicity's sake after a while I got tired of hooking my phone up to the radio and just bought a 32gb usb stick for cheap at Office Max.
wallie-s said:
First off al, in the standard roms, there is a option under connections, where you can switch from activesync to mass storage..
Bluethooth audio will be not as good as the original output of the phone, and, my most important thing, it won't charge..
But, i just orderd a very cheap radio with usb and a aux input..
( elta 7527 )
Will let you guys know when it's installed..
Click to expand...
Click to collapse
Wow, I guess I learned something new, I just figured the Mass Storage option wasn't there, as it doesn't pop up like in the Touch Flo 3D ROMS.
As far as Stereo BT audio quality. You are right, but you'd be hard pressed to be able to discern ANY difference in quality in a car, and I'd call it impossible to discern while actually driving.

Mono Sound via USB adaptor

All,
Just flashed to Solace v3.1 (which I LOVE, btw). Getting an odd issue, hoping maybe someone else can point me in the right direction.
I have an adapter that plugs into the USB port (originally from my Titan) that allows me to plug in both USB power and a headset. From there, I have an adapter that converts to 3.5mm, and a wire which I then plug into the aux-in of my car stereo.
Previously, this set-up worked flawlessly. After flashing to Solace, however, I only get mono sound (right channel only).
I asked in the Solace thread also, but no one else seems to have this issue (or haven't noticed. Sorry for cross posting!). Hoping that someone might have seen this problem in general before, or have a place I might try looking for a possible solution. I searched the entire registry for things like "balance", "stereo", "mono"...even looked at every single entry for "usb" without finding much in the way of a fix. Missing entry perhaps?
Really appreciate anything anyone can do to help at this point!
Damaged mini usb port?
I had the same problem with my Tilt. Although it only had the stock 6.1 rom (fluff free), I'm guessing the pins on your port are misaligned or broken. You soon may discover that it won't sync with your computer and shortly thereafter will not charge anymore.

USB not responding when pluged-in to computer

I have a problem with my X1. Its not responding when pluged in laptop or any other computer...but charger is working properly...what is the problem,do i have to change and settings or???
thank you in advance!
cheers
use a two-plug USB cable (the type that comes with portable hard drives).
Maybe setting is wrong
Hi,
take a look at your settings. In the connection settings it might be set to the faster active sync mode which does not work most of the time.
If it is already disable I have no clue
Viper

Categories

Resources