ok so i was wondering (if you have the dust under the screen) if your hero will it select what you press and hit random things like when you press o it types something so off like x42 or something like that and im wondering because i want to know if its that or my touch screen going bad
That sounds pretty unlikely, since it is a capacitive touchscreen. Unless the dust is drawing away the charge around these areas, I'd say your touchscreen is knacked.
Have you tried doing a touchscreen calibration? (under language & keyboard, if I recall correctly)
Related
Hello all.
So, long story as short as possible:
My Tilt got run over, LCD screen was busted but I could still make and receive calls by sliding it open, hitting the call button and using the keyboard to dial and 'enter' to connect.
I was also still able to connect to the phone via bluetooth from my mac, as well as syncing it on my PC partition.
Eventually, I think I hit too many random buttons and turned the phone off or something as I could no longer get it to dial out this way. I was always getting the flashing green and blue lights though.
After some research (and un-won auctions on eBay) I decided to see if popping in a new LCD screen would fix my situation.
I installed the new LCD last night, and the machine is almost back to living, however, I now have the current problems:
When the phone boots into 'normal' mode, the screen is display is very truncated. It doesn't display the full HTC updated today screen and won't respond to touch. It says 'no service' but wi-fi seems to connect. If I slide it open, the keyboard lights up but doesn't respond, neither do the front keys. Also, I get only a solid orange light in the upper left LED.
If I boot the phone into 'Safe Mode' it responds to touch, connects to the AT&T network, connects to Wi-Fi, etc. The front keys still do not do anything, and when I slide it open the keyboard does not light up or respond. Also, I get both the green light in the upper right and blue in the upper left.
Another thing, when I slide the phone open and closed there's a slight ripple in the middle of the phone like something is 'pressing' on it from the back.
Sorry for the novel. Any help is appreciated. I'm considering 'clearing storage' and returning it to factory settings or flashing the ROM. I've taken it apart and put it together like four times now, checking, double checking and triple checking connections.
Thanks!
Sounds like one of the headers isnt fully seated in the display region. IIRC there are two that I had to deal with with my 10min LCD swap routine
Yeah, I think you're basically describing symptoms of having put the phone back together wrong except that it's interesting it responds in this 'Safe Mode' and interesting that it would happen after four retries
It's probably going to need a hard reset then! You might want to check nothing has been bent, warped mountings/plastic could be the cause of the screen ripple issue.
Were there any active components on the touch film for the display? (Assuming you have replaced that too with the LCD, or that they're one whole unit) if that is the case, they may be different, newer revisions? Really grasping at straws there though; at the end of the day, the poor phone has been mauled by a wheel... best of luck!!
Thanks for the thoughts! I guess I could try and break it down again. As far as I could tell, everything looked like the phone in the disassembly directions; nothing appeared unduly bent or mangled.
"Sounds like one of the headers isnt fully seated in the display region."
I'll google it, but what 'headers' are we talking about? The small metal bits that seem to touch the upper outside edge of the LCD screen?
Would an improperly seated header cause the other symptoms? Unresponsive other buttons (keyboard, front keys) and connectivity issues with the network?
"Were there any active components on the touch film for the display?"
I got a new LCD and digitizer (is that what you mean by other active components?).
Thanks again!!
AtillaDNun said:
Thanks for the thoughts! I guess I could try and break it down again. As far as I could tell, everything looked like the phone in the disassembly directions; nothing appeared unduly bent or mangled.
"Sounds like one of the headers isnt fully seated in the display region."
I'll google it, but what 'headers' are we talking about? The small metal bits that seem to touch the upper outside edge of the LCD screen?
Would an improperly seated header cause the other symptoms? Unresponsive other buttons (keyboard, front keys) and connectivity issues with the network?
"Were there any active components on the touch film for the display?"
I got a new LCD and digitizer (is that what you mean by other active components?).
Thanks again!!
Click to expand...
Click to collapse
Any cable that attaches to the circuit boards, re-seat every one you can find. One faulty connection can cause a lot of problems. I have a similar problem with a button on my PSP but im to lazy to fix it.
Instead of just making the bottom part where the capacitive buttons lay have their own sensors (or along the lines of something like this) why did HTC make all of the phone capable of touch? This small factor right here contributes to touch screen issues - for those whosr hands may need more room. If even one piece of skin is too close to the phone, it can result in aggravation.. though luckily I don't hold my phone like this.
Was this necessary?
Im sure plenty of you here know something about this..
Totally agree. It's a pain not being able to do simple tasks with one hand.
I recently purchased a Vogue off of ebay and tried out the SD Card version of Android running Incubus26Jc's Super FroYo 2.2. I wanted to do this before installing to NAND to try it out. After trying it out for a bit I noticed that the touchscreen is not that sensitive.
For example, if I try to swipe with my finger from left to right to get to the second home screen it requires me to swipe from the very edge of the device (if I don't do a swipe across the whole screen it doesn't work well) and push down hard (as compared to another newer device like the iPod Touch). Tapping the screen works fine. Other things I noticed about the screen is it isn't easy to view it at an angle and pressing down with my finger sometimes changes the color of the area immediately around the finger.
My question is whether the device is faulty (in which case I will try to return it to the seller) or is that just the nature of this older touch screen. Or maybe it has to do with the fact that it is installed to SD so it is slower to respond?
no there is nothing wrong with your phone.. the vogue uses a resistive touch screen witch requires a little more pressure than say the itouch or any new touch screen device... they have a capacitive touch screen witch uses electric currents i think.. i prefer a capacitive. but try the screen calibration app and press lightly that might fix your problem
and you shouldn't press very hard they could really mess up your screen
Try using your fingernail instead of pressing harder.
Sent from my European Vogue using XDA App
I am not sure whether it is my mind playing trick with me or not, but I feel like my phone is less sensitive after I did the hard reset (power+volume down). Sometimes I need to press 2-3 times because the first light tap was not detected.
So is there anyway to increase the sensitivity?
I have the same problem, but no idea that is the hardware or only software problem.....
Fresh owner of this Optimus 2X in France, in our community, frandroid.com, we encounter the same problem , I think this is a software issue.
Did someone already contact LG??
Maybe they should include this into the bug list thread.
May I know were you guys having this problem since it is out of the box? or after reset?
I have the same problem started from day 1 till now
I have the same issue and already thought I'd be the only one having this problem.
I would not say it's a problem with sensitivity, but it feels like the touchscreen goes into some kind of sleepmode where then you need to press a second time, to wake it up.
Continuous touching is no problem. (like when typing rapidly on the keyboard)
This video is not from me, but it shows the problem.
Have a look at 13:28 and 13:37. The reviewer tries to hit the "Ackermann" entry, but the touchscreen does not recognize the touch. At 13:37 the guy has to press another time to get the entry selected.
http://www.youtube.com/watch?v=VRid-Yhu7Gg&feature=player_embedded
Yes! The touchscreen is definitely less sensitive than my old HTC Hero, and gets quite frustrating sometimes when a scroll misses the first part of the movement or a click is missed.
Sent from my LG-P990 using XDA App
just in case, are you guys using 20110218 baseband too?
The same problem here. If I unlock the screen and then tap on any on screen apps, I need to touch again for it to open. Only the first time though, after that it function ok. I think this is a bug and needs to be fixed... I have my pc for double-click.
Yep, count me in. Same problem here. Sometimes screen taps aren't registered. Will do some research later on, but I think it's a software problem. (maybe you have to tap 2x as fast )
Hi,
same problem here!
Potentially a driver issue. A Nexus S user had a similar issue in this thread: http://forum.cyanogenmod.com/topic/18431-tuning-driver-to-deal-with-unresponsive-touchscreen/
He managed to tweak the driver and it works fine now. Need to know C++ (I think?) to understand though.
9mmBullet said:
Potentially a driver issue. A Nexus S user had a similar issue in this thread: http://forum.cyanogenmod.com/topic/18431-tuning-driver-to-deal-with-unresponsive-touchscreen/
He managed to tweak the driver and it works fine now. Need to know C++ (I think?) to understand though.
Click to expand...
Click to collapse
I see, then probably they will fix it on the next update/gingerbread?
Same issue here.
Correct me if I'm wrong, but the problem seems to be that the screen has zero tolerance when it comes to tapping and swiping together. If you tap and slide your finger a bit directly after the tap, the tap is ignored. In other words your tap has to be a steady tap when you click on a button or an app. Right on the spot and with no swiping or sliding afterwards. I can't reproduce this on any of my other devices.
Ergo, it seems that the natural tapping I'm used to isn't working on the x2. It seems like I have to adjust my tap. I think that this could in principle be solved with a setting somewhere, because clearly the x2 is capable of registering this in for example a web page.
The great thing of this is that you can safely tap and swipe in the app drawer to scroll up and down or left and right. The downside is that a tap with a little swipe isn't registered at all. I would say that LG has choosen here for a wrong setting.
My personal experience about screen sensivity.. can you confirm if it's the same for your device?
I noticed a strange touch response.. and after some tests, I can say that the touch screen and icons are influenced by the surface where the phone was put!
with the phone in my hands, it's all ok (only sometimes - rare - I need to tap more than once).
If I put the phone over a glass surface (like a glass table) without touching it with both hands, the touch and the icons not respond!! NEVER!
If I put the phone on my scanner the touch screen works ok, but the icons not (or only few and rare taps was detected).!
If I put the phone over my big Onkyo amplifier.. It works like in my hands.. or better!! even without touching with hands.. only with a finger!
Put it back on my glass table.. and all stop working again. If I put a aluminium foil under the phone (between phone and table).. the touch and the icons works again !!
If I put it on the bed.. it don't work.
LG support say that they have tested the phone about this issue after my report.. but no strange response was detected by them. I don't know if they really tested it..
Try it and let me know what you think about!
tested on glass surface, I can press and swipe through pages with a finger without problem.
it is true that my device is not so responsive, but aint reaching that level yet
i read about a similar behaviour on other devices because some devices need a proper grounding for the capacitive screen to work correctly. You can find this problem via google.
Some devices have problem in a car-mounting, for example.
But i think thats not the problem the thread-opener talked about?
Guys I'm looking to get this phone and after reading Engadgets review of the X2 where they mention that the screen is not as sensitive to the touch as other phones I got a bit worried and started googling which lead me here!
Is this true? The screen isn't very sensitive and you have to apply more pressure than other capacitive phones?
I know that the OP is talking about a different issue but I reckon LG will get that sorted out via software update, or at least hope so!
Please do post your experience about the screen sensitivity of the X2 as this is putting me off. I currently have the Motorola Milestone 2 which is very sensitive to the touch even with a screen protector on it.
Cheers
Well, I fixed my old broken G1 with new screen, touchscreen panel, case and keyboard.
Now I have 2 issue:
1) Sometimes my touchscreen goes grazy!! If I use the touch test application I see that sometimes when I touch the screen in an area there is another virtual touch in another zone of the screen. I read that it can depend from the current source when I charge the phone.. but I'm going crazy!! I opened my phone 10 times (I thought there was a problem in the cable that link TouchPanel to LCDPanel, because when I lock the cable with the clip it tends anyway to go out from the connector, now I put some scotch tape to fix but the problem is here.. so I think is another problem).
2) My volume rocker doesn't work!!
I bought 2 new keyboard to fix this problem, but no one of that fixed the problem. I thought the first new keyboard had volume keys broken, so I bought another one, but the problem persists!!
Now the Touch problem rarely happens, but the volume rocker is completely unusable..
Someone have experience about G1 assembling/repairing ?
Thanks and sorry for bad english
if you have put in multiple keypads have the same issue i would assume that it is the connection going to the motherboard. just a guess there but its either that or you have had a bunch of faulty keyboards.
only other thing would be a software problem
does the keypad work in recovery (let you go up down throughout the list) ?
as for the touch screen, probably need a new digitizer or flex cable, both are cheap and it sounds like you have the knowhow to replace them.
Ok, but digitizer is new!! screen also is new, and I have bought a total of 4 flex cable because I see that they are fragile (I broke the first I bought).
I tried to change flex cable but the problem remain the same.
The only thing that can be damaged is the LCD cable that links to the flex cable: it has a small cut where the cable have a curve, but the cut don't reaches the contacts (the cable is transparent). I also use some glue and scotch tape to mantein lock the cable.
The digitizer cable is connected to the LCD cable, and then they go to the flex cable that connect them to the motherboard.
The strange thing is that seems a software issue, because if I turn off and than turn on the screen, the problem is fixed for some seconds, minutes and sometimes hours...
Another strange thing is the possibility to control the screen with some metal objects from the moment that the virtual touch problem appear (I can control the screen also without touch it, with hand and piece of metal)
video:
have you tried a factory reset if you think it may be a software issue? if that dosent work you can try install a whole new rom.
really it sounds like it isnt the hardware since you appear to know what youre doing. i have a had a few phones that had screen (digitizer) issues and a new rom flashed cured it just fine
since you dont mind putting a few dollars into it, and your familiar with the inside, you can always try to pick up a cheap motherboard or spare phone from ebay or what have you, then swap the motherboard and you could then hopefully find out if it is the hardware or software
nagash91 said:
Another strange thing is the possibility to control the screen with some metal objects from the moment that the virtual touch problem appear (I can control the screen also without touch it, with hand and piece of metal)
Click to expand...
Click to collapse
Huh sounds like you got a cheap digitizer than. Most good digitizers use heat to touch. If it's literally touch, then sounds like its a fake/meh digitizer. i hate the digitizers that aren't heat, but press. I see them all the time in those first samsuck touchscreen phones. And they usually die in a bit. I had a Samsung behold with a screwed up digitizer
demkantor said:
have you tried a factory reset if you think it may be a software issue? if that dosent work you can try install a whole new rom.
Click to expand...
Click to collapse
Yes I flashed 3 or 4 roms after a wipe (I tried also super-wipe.zip), but the problem is here..
The digitizer works well some times, but sometimes get crazy (you can see in the video).
I don't that my new digitizer is fake, but I really don't know!
BTW I'm trying to repair my phone for fun (now I have desire z) and because I am fascinated by my old G1.
PS:
I see another strange issue--
If I touch the screen when the phone is on a table the screen digitizer is not very sensitive and can't take input from fingertips.
If I touch the screen when the phone is in my other hand, the screen digitizer is a lot more sensitive and it take input from fingertips.
My impression is that there is an electric field or something similar that disturbs the digitizer, and when I take the phone in my hand I discharge that field to ground. Also when I turn off the screen, seems that the electric field discharge so when I turn on the screen is ok, but after some seconds the field returns to disturbs the screen.
I really don't know, but is the impression that I have.. something that is not shielded.
Now I'll try to use my phone in airplain mode.
Thanks guys, I'm happy to see that this forum is still very active