[Q] my i9000 is not booting no power - Galaxy S I9000 Q&A, Help & Troubleshooting

my i9000 not booting & it has no power & no display.. i flashed a wrong rom.... 3 button fix is not woring.. jig is not working... any solutions out there.. thanx

No power = charge battery or us a new battery
No 3 Button No jig so you cannot turn it on any other way .
Otherwise Samsung service centre and hope they dont charge to much .
jje

i9000 not turn
I have the same problem.
my i9000 I do not care, I changed the battery and nothing. no picture on the screen.
Can someone help me?

i9000 not turn not booting
I'm having the same problem.
The phone will not turn. Totally dead.
Anyone got any solutions?
Good luck to me!

Related

[q] no power no display no lights on

my galaxy s i9000 do not have power or any thin battary is fully charged. tried using dc power connected. it happn whn i flashed 3-button combo fix.. thanx in advance ^_^ any way to fix..
take the battery out then do the 3 button combo whilst putting the battery back in. if your phone shows no sign of life.... there probably isnt... you could try a jig but i dont think that will work unless the device powers up...
Maybe a trip down to samsung repair centre is in order.
wooow thanx man.. now is downloading mod now wt
i didnt understand that.... is download mode working now ??
your last hope is samsung repair center if its totaly dead
yah its woring & have installed a rom now thanx

[Q] unbrick galaxy mini?

so i rooted my phone installed rom manager and flashed something like colckwork rom of hawai mini i switched of my mobile.Today in morning when i tried to tun it on it wont only a black screen no sound no logo no vibration I even tried to remove and insert battery but no luck.I think its a hard brick i got this mobile on 28 feb 2011 and it is still under 1 year warrenty of samsung so can i get a new mobile in place of it or just recover it.(I have the UK system here noot of USA)
can you tell me any way to unbrick it any any one
I have done something similar to my Samsung Vibrant. Rooted and was in process of installing new ROM when on restart got a screen that has Vibrant at the top of screen and Samsung on the bottom of screen then a blank black screen and then goen into a vibrating loop of single vibrate and then another single vibrate and then a triple vibrate and then it starts the loop over again. The only thing I can do is pull the battery to stop it. Anyone know of any thing I can do to correct this or to revert the ROM or anything?
Thank you
Larry
Take it to T-Mobile and say when you turned it on it was like this and they might send it off to be replaced.
i hate those people who wanna pay their insurance for their silly things and fails!
i hope, tmobile won't take it back.
let's see..it's really hard to brick a phone though.
had some problems with my further hd2 as well..yeah, you get really annoyed but if you chill out, in 99% of the cases you'll find a solution.
DN41
so guys i live in india here it is called galaxy pop i went to samsung service center and there they replaced my motherboard for free cause it was still in warranty .I will get it next tuesday
I have this model, too. But it is called GT-S5570. It works fine, but i bought it network lock. Have you succeded unlock it?
Had the same, the solution is simple:
Download the newest firmware at samfirmware.com
Use Odin Multi Downloader to upload the firmware to your mobile
(mobile needs to be in download mode, this should still work. Try volume down + home + power)
Just upload the clean firmware and it should be done. The complete guide is placed on the same website on the download page.
OfficialDenzil said:
Had the same, the solution is simple:
Download the newest firmware at samfirmware.com
Use Odin Multi Downloader to upload the firmware to your mobile
(mobile needs to be in download mode, this should still work. Try volume down + home + power)
Just upload the clean firmware and it should be done. The complete guide is placed on the same website on the download page.
Click to expand...
Click to collapse
download mode is not available while is bricked, changing the firmware is NOT an option.
hi
yeah same thing happen to me
even the samsung survice centre is lame they tell me that it will cost me
so i bring ma set back and do that jig method and it works more than charm i install ma new cyanogen mod and it is working greatly .if u want to find jig method type unbricking galaxy s jig.
it also works for my mini
Just a little german ?!
DN41 said:
i hate those people who wanna pay their insurance for their silly things and fails!
i hope, tmobile won't take it back.
let's see..it's really hard to brick a phone though.
had some problems with my further hd2 as well..yeah, you get really annoyed but if you chill out, in 99% of the cases you'll find a solution.
DN41
Click to expand...
Click to collapse
(I don't have this problem, but...)
And I, I hate little brained guys who says f***king silly things like you. You're not just a little german, you're also a big sucker.
I swear you will have a problem with your phone, and no solution. Really I wish you that.
For other people who has this problem, don't worry, your phone is frozen, so they can't diagnose it. Just say you was syncronizing with Kies, and it happend the phone turned off and that's impossible to restart it. They'll just give you a new one or repair it.
HI
try these ways
it works with my galaxy s
Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
If this does not work, open odin. Then connect your usb cable to your phone and computer. While the USB is plugged in and Odin running press and hold volume down + Home + Power. Once the black screen comes (flashes) release the Power Button. It should get into download mode.
Additionally it is possible to get into the Download Mode using a kind of micro-usb connector,
the last thing u can try is the jigs
ilazially said:
HI
try these ways
it works with my galaxy s
Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
If this does not work, open odin. Then connect your usb cable to your phone and computer. While the USB is plugged in and Odin running press and hold volume down + Home + Power. Once the black screen comes (flashes) release the Power Button. It should get into download mode.
Additionally it is possible to get into the Download Mode using a kind of micro-usb connector,
the last thing u can try is the jigs
Click to expand...
Click to collapse
Man that volume up and down doesn't support if you have a completely hard bricked phone .
And the jig does works but why use your penny if xda developed a unbricker wich really works for free
I prefer xda undricker the best
Sent from my GT-S5570 using xda premium
Hello guys.I have a galaxy mini and i tried to root it.Everything went fine.Then i saw that an application "Rom manager" would be helpful for my phone.
So i installed it(like an idiot).
Then i tried to install clockwork mode (smthg like that from rom manager) and boom!Everything went black.
I tried to go into recovery mode,download mode NOTHING.
I tried to a lot of things but nothing is working.
Odin recognises my phone when i use volume up+home+end!But it stucks on setup.Again tried to do it in that way but still nothing.
Last i tried that jig thing.I bought 3x100k ohm resistors and do it like he says(that video from youtube) BUT STILL NOTHING.
I dont know what to do!
I would be gratefull if some1 could give me an advice to make it to turn on!
Tyyy.
This is exactly what happened to me too. Did Service centre repair it for free ? What did you tell them ? Please help. ITs urgent/ Bricked black screen.
sahilg009 said:
so i rooted my phone installed rom manager and flashed something like colckwork rom of hawai mini i switched of my mobile.Today in morning when i tried to tun it on it wont only a black screen no sound no logo no vibration I even tried to remove and insert battery but no luck.I think its a hard brick i got this mobile on 28 feb 2011 and it is still under 1 year warrenty of samsung so can i get a new mobile in place of it or just recover it.(I have the UK system here noot of USA)
can you tell me any way to unbrick it any any one
Click to expand...
Click to collapse
Swanks
Guys trust me ROM manager sux bigtym i tried all the cures bt didnt work. Handed it ova to samsung guys n they replaced my motherboard!
sopree said:
Hello guys.I have a galaxy mini and i tried to root it.Everything went fine.Then i saw that an application "Rom manager" would be helpful for my phone.
So i installed it(like an idiot).
Then i tried to install clockwork mode (smthg like that from rom manager) and boom!Everything went black.
I tried to go into recovery mode,download mode NOTHING.
I tried to a lot of things but nothing is working.
Odin recognises my phone when i use volume up+home+end!But it stucks on setup.Again tried to do it in that way but still nothing.
Last i tried that jig thing.I bought 3x100k ohm resistors and do it like he says(that video from youtube) BUT STILL NOTHING.
I dont know what to do!
I would be gratefull if some1 could give me an advice to make it to turn on!
Tyyy.
Click to expand...
Click to collapse
This!!!
rooted phone!! installed Titanium Backup pro, rom-manager (though i didnt use it).
First i removed yahoofinance.apk thingy... it went black but recovered to charging mode (battery charging screen)... odd i thought.. and (like a idiot) booted up and removed livebackground forest thingy... now!
Pitch black, no state of recovery.
Just thist:
Vol up, home and power button. makes it visible to windows and odin.. KIES failes to connect it...
Its almost like... i got one first warning.. and then samsung decided to **** me!
is it somekind of "security lock"?, its not like i removed the kernel.
EDIT: so.. im messing around... The only thing that one really gets comunication with is the modem circuits, so it looks that way... But then what do i know...
ODIN connects to the same com-port as the samsung modem reports having in device manager!, so i asume this is unit it uses to when transfering the data, flashing.
Other: i get some different behaviors... etc, i would use "volup, home and power" to make it visible in win and then i could just use the power button to get the connection on and off (or rather reset! since i just one time got it to actually stay disconnected).
Now on the other hand i cant use the just the "Vol up" button combo, i have to press both Vol up and down with pwr and home to get it to connect with drivers and show up in ODIN etc..
In some cases u have to have battery unpluged and show it in while holding button combo and sometimes u dont..
I cant make out anything out of this, but maby some of u guys can!?
Rom Manager screwed your phone. Not uninstalling forest wallpaper.
I got my phone hard bricked because of ROM manager. I have given it to the service center. Waiting for them to fix it.
chemicalrage said:
Rom Manager screwed your phone. Not uninstalling forest wallpaper.
I got my phone hard bricked because of ROM manager. I have given it to the service center. Waiting for them to fix it.
Click to expand...
Click to collapse
Is there any other option before we go to the service center??
I mean to fix it alone...
sopree said:
Is there any other option before we go to the service center??
I mean to fix it alone...
Click to expand...
Click to collapse
If the phone is hard bricked (no download mode, no battery charge indicator when power plugged in), you really do not have a choice.
While people claim to be able to use jtag / USB jig (see the only thread started by me in the accesories section of this miniforum), I do not have clear answers in that thread.
genieass said:
If the phone is hard bricked (no download mode, no battery charge indicator when power plugged in), you really do not have a choice.
While people claim to be able to use jtag / USB jig (see the only thread started by me in the accesories section of this miniforum), I do not have clear answers in that thread.
Click to expand...
Click to collapse
That jig thing doesnt work..pfff

[Q] stuck on 'Samsung' screen after using odin

heya guy's
I tried to use Odin for the first time
and it went wrong.
i got a Samsung Galaxy s i9000 .
and i think i used the right pit and pda
but it failed
so now im stuck on the louding screen..
loading screen = the letters 'SAMSUNG'..
i cant go to Download mode anymore for some reason
can anyone help me out pls i want my old fone back
greeting Laurens.v
try this hold the download mode buttons take out battery (Whilst holding power volume down and home button) and put back in should hopefully boot into download mode or buy a jigg from ebay or make one
TechKidTarek said:
try this hold the download mode buttons take out battery (Whilst holding power volume down and home button) and put back in should hopefully boot into download mode or buy a jigg from ebay or make one
Click to expand...
Click to collapse
Download mode buttens ,, what happened on the screen,, the teskt 'samsung' kept on Flickering,, removing the battery also didn't worked out.
and whats a jigg?
aint there another option that i dont have to pay for ?
Laurens.v said:
Download mode buttens ,, what happened on the screen,, the teskt 'samsung' kept on Flickering,, removing the battery also didn't worked out.
and whats a jigg?
FAQ one must read post .
http://forum.xda-developers.com/showthread.php?t=819551
aint there another option that i dont have to pay for ?
Click to expand...
Click to collapse
Yes give phone to a poor person .
Go to service centre and they charge you for breaking warranty .
poor persons scrape enough money to make or buy jig fix phone join xda read FAQs become top dev in no time at all .
jje
The jig is a connector you plug into the usb port with a 301k resistor between two of the pins. I did exactly the same as you and had to make one. This forces download mode. The holding down buttons trick doesnt work for some phones
Sent from my GT-I9000 using XDA App

[Q] Charging but not opening??

Hello everyone..
I broke my phone (i9000) screen flex.. and ordered a brand new screen.. i wait about 2 month to have got the new screen..
as soon as it arrived i replace the old one.. screen working without any problem.. but i couldn't manage to open the phone..
power button appears to not working.. if i connect to the charger i can see the battery icon, but i cant wake up the phone..
please help me..
I would suggest that you open the phone again...take the battery out and pull the rear- or middle cover away again (unscrew that 6 or 8 screws). Then insert battery again and try to start the phone by pushing direct onto the inside "powerbutton". I got this managed with my fingernails but perhaps a small tool will help for example a pencil or something like that.
If its starting then, you just have to adjust the inner powerbutton better to that small frame, so that the external powerbutton does it meet better by pressing it.
Fisrt of all, thank you for the reply..
The phone is separated to the parts.. i try your suggestion.. nothing happened..
i try to link the two base pin of the power switch with a cable.. still nothing happend..
something strange is happening but i can't understand..
update..
I start up the phone..
But the power key isn't working.. I can't take to the sleep mod with power key..
How can i boot it up.. I made a jig with 300k ohm.. then pluged in to the phone.. than it opened to the download mode..
I try to flash a new rom, but computer said "device don't connected".. I give up than unplug the jig.. Suddenly phone powered up..
So i don't know how i powered it up.. but it is working..
I still have an issue.. Please help me about non working power key..
I don't think your power key problem is software or rom related....there should be something mechanical or electrical wrong.
I made the same experience when i unplugged the usb jig...phone starts automatically (sometimes), think this unplugging causes a sort of electrical bridge between the contacts and so the phone starts.
To get in recovery mode there is an app in play store, called: reboot to recovery (root). With that you will get in CWM...i do not know anymore whether it also has an option: reboot to download mode, but therefore you will have your jig, if necessary.
I'm already using a cm rom.. So i can boot to recovery easily.. Updated to the lastest nightly..
I agree with you about the problem source.. But i don't know how to fix this..
I can open the phone with this jig methot.. but this is not working every attempt.. I need to fix problem..

Strange issue

My phone is stuck in bootloop. Phone is not getting switched off. When I remove the battery and insert after couple of minutes it gets Switch On automatically and reboots again after CynagogenMod's Logo. I can't enter custom recovery because of it. I tried every button combination but nothing seems to be working. LG L90 ( i changed my battery too ) 2 phones with same issue .. i dont know how to fix it.. i thought its power button issue .. even i gave service center too .. that center service man also checked and said power button is good only then he told i too dont know the problem.. i got confused.. cant find exactly what is the prob is .
Any solutions?
Try this below.
https://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479

Categories

Resources