Ok I ripped this from my Stock Alltel 6.1 TP Rom tracked down the files and reg entries and cab'd it all up.... I installed the cab on my TP now using SilenceMighty Rom and it functions perfectly.
I don't have or personally know anyone on another carrier to test it so I don't know if it will work on other carriers...
City ID, an application from Cequint, features information on more than 20,000cities in North America, providing enough detail to be useful identifying numbers calling from both across town and across the country
City ID service will automatically display the city and state where an incoming phone number is registered, providing additional information to help Verizon Wireless customers recognize unknown numbers
Installed on Verizon Samsung i760 w/ WM6.1. Programmed installed - I can look up numbers in the app, but it does not show location on incoming call or call history.
Ideas?
Ok, I will look into it on my friends Verizon Samsung i760. Give me a day or so
siacono said:
Ok, I will look into it on my friends Verizon Samsung i760. Give me a day or so
Click to expand...
Click to collapse
Any updates on this, I am interested as well.
Stiil woring on it I think it has something to do with the dialer
Post redacted.
ebayking90 said:
I have a Imagio and it comes with this program, but it is a trial version. Is there a way to bypass that or will the above mentioned cab work without a paid registration?
Click to expand...
Click to collapse
Never mind.
Hello,
If anyone happens to have an nTelos motorola milestone could you send me it's NV items with cdma workshop? Also if you could read the nam with qpst, save it and send it to me I would greatly appreciate it. I am trying to setup a moto droid x with this carrier and they refuse to give me the proper M.IP settings for the device and sadly the information can be different from phone to phone. Or if someone knows the M.IP information that would work too but I wanted to examine the nv items to see if I can make this easier for others on ntelos wanting to bring over a droidx.
Hi!
My name is Alain, and recently, I buy a Samsung Tab for replacing my Iphone.
I seaw on youtube that someone make call with is Tab, Cool!
I find your forum, and when I read, there some interegation make came into my eyes?????
Sorry for my poor english writing, but i'm a french person and I assure you that I do my Best!
My question is... which KIES software that I need?
(I install KIES_1.5.5.10092_58_8.exe but when I run this program, they said there was a new update and after That I update the software, I look at the version and it's said 1.0.0. on the Icon but in preferences option it said 2.0.0.11011_49)
which sequence firmware that I neek, there is a sequence or I just put the last one...
I get my new Firmware at Samfirmware dot com...wright
Here, can I put any of the Firmware that I need to make and to receive call like a cell phone?
In my Tab, the firmware that I found is P1000RUXJJ6...it's the real info?
Thanks you so much for your help, i'm appreciate!
Alain
Hi Alain,
Going out on a limb here, but are you in Canada and French is your native language?
If so, I presume you have a Rogers or Bell Tab that didn't come with voice functionality out of the box?
If that is the case, you should read the thread here. Note, if you have a CDMA Tab, don't do this!!!
If this isn't the case, you need to be a bit more specific about where you are, what carrier you are using, and the "type" of your Tab.
Regards,
Dave
Thanks Dave for your anwser!
And yes i'm with Roger, but I just dont know how to get my CDMA info?
I will look at your link...
But if I understand what you wright, I must dont have the hardware into my tab to make call and receive some...it's wright?
Alain
If you are on Rogers, you will have a GSM Tab capable of bring flashed to a ROM and radio combination that will allow voice, though obviously you will need a SIM with a voice plan.
The link I posted should be all you need to do this.
Regards,
Dave
I have already a voice plan. . . I'm updated again the Kies software and I wll download
Odin3 v1.31
P1000XWJJ4 & P1000XXJK5
and follow the instruction! !!
Step by step. . . I will win!!!!
Good News !!! all work! I can phone with my tab!
But I was surprise that my 3G connection was gone...what can I do?
expeditionboreale said:
Good News !!! all work! I can phone with my tab!
But I was surprise that my 3G connection was gone...what can I do?
Click to expand...
Click to collapse
Now everything is done, all you need to input is APN, which means settings for your 3G connection to work Check under "Wireless and network" > "Mobile networks" > "Access Point Names" > Are there any settings in here? If there aren't you will need to search for "Roger 3G APN" or go here for settings, report back here on your progress.
Hey you guys, you are so HOT!!!!!!
Thanks you very much for your help!
I was sure that I have to deal with no 3G data and I was very sad!
Thanks you!
Thanks You!
THANKS YOU!
Alain
expeditionboreale said:
Hey you guys, you are so HOT!!!!!!
Thanks you very much for your help!
I was sure that I have to deal with no 3G data and I was very sad!
Thanks you!
Thanks You!
THANKS YOU!
Alain
Click to expand...
Click to collapse
Glad its helpful
Sent from my GT-P1000 using XDA App
I posted on ppcgeeks, but I don't know if I will get a reply there or not, they aren't too active on the Tab forum. Anyways, I updated to GB, and I don't have my contacts program anymore, and I was wondering if anyone could assist me in getting it's return. I'm running the Sprint GT in case that matters. Thanks in advanced to anyone that does help. (I thought about looking for an .apk, but I didn't want to install it, and find out it's buried in the rom somewhere like the market place ordeal.)
Hey, I just upgraded to the new AT&T ICS ROM.
I'm trying to make the 3D Button work as a shutter.
I remember on GB that required modifying the region in the flex.xml file from US to USA.
FLEX_COUNTRY_CODE="US"
http://forum.xda-developers.com/showthread.php?t=1293947
But now I can't seem to find it on ICS...
It's not in /system/etc/flex/flex.xml. Any ideas?
Ever find anything? I'm also trying to get the button to act as the shutter, and Google'd myself into your thread. I haven't had any luck yet.
No luck. In the meantime I set the 3D_BUTTON to CAMERA so it at least opens the camera...
This can't just be a Thrill 4G issue. I'm guessing the structure changed in ICS of all devices? Maybe a code repository is a good place to check...
I found similar settings in
\etc\dcm_settings.xml
But changing the country of "US" to "USA" under operator="ATT" didn't work...