Database Develop

PROBLEME Recovery 3e to the recovery 2e how this

hello
excuse me for my English
good I read and reread every tutorial I found but I'm blocking
Here is my configuration sgs
Version 2.2
I9000BUJP5
2.6.32.9.root @ SE-S611 # 1
FROYO.BUJP8
Phone rooter
recovery ok
download ok (natively on this)
PDA: I9000BUJP8
PHONE: I9000BUJP5
CSC: I9000GSFRJP4
The recovery mode is the third recovery
by reading the tutorial from some site, it does not have to go in JPY recovery but it must be second
and the second recovery must be in JPY
So my question (which is probably very stupid)
How to place 3rd in the recovery recovery for the second update to a rom with newest show a custom rom
because I'm looking on the forums that I know I can not find, or I'm a big spot comprehension question will know
has the support
Thank you

Just flash another ROM with odin like JM8
(link=> http://www.multiupload.com/FCYKST8QBO)

if I understand it enough to flash using odin with official rom so that I spend in recovery 2?????
si je comprend bien il suffit de flasher en utilisant odin avec une rom officielle pour que je passe en recovey 2e????

Follow darkys 9.2 resurrection . Its video will show u
Sent from my GT-I9000 using XDA App

[Q] International P-1000

Hello,
I picked up a GT-P1000 from a friend who got this in China (GSM version) and I'm a bit confused when I read here on these forums as to which version of this tab I really have. It seems like I have the the "latin" version but this model was bought in China and when factory reset, all text is in Chinese font. I'm in the US btw, California
Back of the phone/tab model reads:
MODELO: GT-P1000N SSN: -P1000NGSMH
FCC ID: A3LGTP1000L
HECHO EN COREA POR SAMSUNG
The About Phone reads:
Model Number
GT-P1000
Firmware
2.2
Baseband Version
T959UVKA5 (Vibrant Modem???)
Kernel Version
2.6.32.9
[email protected] #1
Build number
FROYO.ZHKA1
Sooo...I'm familiar with rooting, flashing, odining vibrants as I've done this for a few years now. This tab's version just has me baffled and I'm trying to avoid bricking. I've achieved root and it's Stock Froyo right now. Kies doesn't support this device when connected so there's no way I can upgrade to stock GB with that method.
My bootloaders are signed and the only .apk that works (thanks chainfire&rotohammer) is:
SGT-Bootloader-Patch-v1.00.apk <-----------this one works
Bootloaders- Signed
Signed: PBL, SBL_Backup, Kernel
Not signed: SBL
Assessment Can only flash SIGNED firmwares
Ready to patch bootloaders...
SGT-Bootloader-Patch-v1.00-P1000_L_N_LATIN.apk <-------Doesn't work
(Your Device [GT-P1000] is not supported)
Sorry this is a lot to read, but I'm trying to be thorough and show my steps. After I patch this, should I use go through Overcome's guide by:
ODINing
"gt-p1000_mr.pit"
"GB_Stock_Safe_v5.tar"
"modem file according to your region" which one do I use? JPZ OR JK3? I still want to be able to make calls on Tmo/Att network
DO I HAVE EURO OR LATIN??? Anyone with a little insight that can point me in the right direction would be very helpful. Thank you again!!!

suchavibrantthang said:
Hello,
I picked up a GT-P1000 from a friend who got this in China (GSM version) and I'm a bit confused when I read here on these forums as to which version of this tab I really have. It seems like I have the the "latin" version but this model was bought in China and when factory reset, all text is in Chinese font. I'm in the US btw, California
Back of the phone/tab model reads:
MODELO: GT-P1000N SSN: -P1000NGSMH
FCC ID: A3LGTP1000L
HECHO EN COREA POR SAMSUNG
The About Phone reads:
Model Number
GT-P1000
Firmware
2.2
Baseband Version
T959UVKA5 (Vibrant Modem???)
Kernel Version
2.6.32.9
[email protected] #1
Build number
FROYO.ZHKA1
Sooo...I'm familiar with rooting, flashing, odining vibrants as I've done this for a few years now. This tab's version just has me baffled and I'm trying to avoid bricking. I've achieved root and it's Stock Froyo right now. Kies doesn't support this device when connected so there's no way I can upgrade to stock GB with that method.
My bootloaders are signed and the only .apk that works (thanks chainfire&rotohammer) is:
SGT-Bootloader-Patch-v1.00.apk <-----------this one works
Bootloaders- Signed
Signed: PBL, SBL_Backup, Kernel
Not signed: SBL
Assessment Can only flash SIGNED firmwares
Ready to patch bootloaders...
SGT-Bootloader-Patch-v1.00-P1000_L_N_LATIN.apk <-------Doesn't work
(Your Device [GT-P1000] is not supported)
Sorry this is a lot to read, but I'm trying to be thorough and show my steps. After I patch this, should I use go through Overcome's guide by:
ODINing
"gt-p1000_mr.pit"
"GB_Stock_Safe_v5.tar"
"modem file according to your region" which one do I use? JPZ OR JK3? I still want to be able to make calls on Tmo/Att network
DO I HAVE EURO OR LATIN??? Anyone with a little insight that can point me in the right direction would be very helpful. Thank you again!!!
Click to expand...
Click to collapse
Hi,
Take a look at this http://welectronics.com/gsm/Samsung/SAMSUNG-P1000N-GALAXY-TABLET-US-3G.HTML
Cheers

Thanks for the specs!
Does this mean I have a Latin Version with US 3G support?
Is it safe to say I don't have to Euro/Asia/International version, even though it's default font is Chinese?
How did the T959 Vibrant modem get in there?

suchavibrantthang said:
Thanks for the specs!
Does this mean I have a Latin Version with US 3G support?
Is it safe to say I don't have to Euro/Asia/International version, even though it's default font is Chinese?
How did the T959 Vibrant modem get in there?
Click to expand...
Click to collapse
I really dont know, mexico uses the p1000L and brasil something else, it seems to be a US AT&T one but i am not sure, it also seems if you have a kernel for your version je can flash p1000 euro version ones, take alook at the dev threads maybe you can find a thread especially for your version. a quick look i found one http://forum.xda-developers.com/showthread.php?t=974408
Cheers

Mobile Network Not Available

I have a problem with my ACE...when I try to call someone I see "Mobile Network Not Available" ... i changed ROM and flashed stock with Odin but still same problem.
How can i solve this ?

take it to Samsung Service Centre.

Remove SIM and re-insert again.

flash modem of your country
Modem Collection

HELP s5830L
I have a problem my phone is a s5830L ace, but install a rom and now I get 55830, I have no signal, the telephone says "mobile network unavailable", I flash the moden s5830lubkp7 odin, but still no signal, try to flash a stock rom to odin, but remains in bootlogo, thanks for the help I can give, i apologize for my English

santiago1104 said:
I have a problem my phone is a s5830L ace, but install a rom and now I get 55830, I have no signal, the telephone says "mobile network unavailable", I flash the moden s5830lubkp7 odin, but still no signal, try to flash a stock rom to odin, but remains in bootlogo, thanks for the help I can give, i apologize for my English
Click to expand...
Click to collapse
Where u from?
Sent from my GT-S5830 using XDA

xSkArx said:
Where u from?
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
soy de colombia, ya instale una rom stock de un operador local y ademas le flashe el moden correcto , el de latinoamerica, pero sigue sin darme señal de ningun tipo, solo dice RED MOVIL NO DISPONIBLE, en colombia mi operador es MOVISTAR y trabaja en banda 850.

I m also facing this annoying problem with my ace running mirracle v4 with 3g sim cards only.... I don't face this problem everytime but sometimes it says no service... dnt knw wht prob is that.....
Sent from my GT-S5830 using xda premium

[Q] S3 III mini SM-G730W8 4.2.2 anyone try to root it?

Hi, I just buy an S3 mini model SM-G730W8 Android 4.2.2 from Fido in Canada. I can't find anything on the web about rooting this phone.
Is any expert here try to root it??
Bonjour, je viens de mettre la main sur un S3 mini SM-G730W8 Android 4.2.2 de Fido au Canada. J'ai beau chercher, je n'ai rien trouvé pour rooté ce téléphone. Est-ce qu'un expert ici à essayé??

I'm pretty sure this works. http://forum.xda-developers.com/showthread.php?t=2469413

not a good idea
It will chage all the response message to chinese !
I install "supersu" after from Google play in order to get my english(or french) message back.
Also, it does not unlock the phone.

Banshee1971 said:
It will chage all the response message to chinese !
I install "supersu" after from Google play in order to get my english(or french) message back.
Also, it does not unlock the phone.
Click to expand...
Click to collapse
He's right didnt work for me either

Get English version here
http://www.mgyun.com/en/GetVRoot
this worked for my mini then deleted the Chinese Supersu and re-installed the English Supersu
now rooted

s3 mini sm-g730w8 mts wireless canada
Hi there I just want to know how to root and install custom ROM on my s3 mini I got it on MTS wireless plan on Brandon MB Canada
Model number: SM-G730W8 android 4.2.2
Baseband version: G730W8VLUAMK1
Build number: JDQ39.G730W8VLUAMK1
Pls. Help me I just want to install the best custom ROM for my S3 Mini
Thank you so much! Have a good day!

bgvillones said:
Hi there I just want to know how to root and install custom ROM on my s3 mini I got it on MTS wireless plan on Brandon MB Canada
Model number: SM-G730W8 android 4.2.2
Baseband version: G730W8VLUAMK1
Build number: JDQ39.G730W8VLUAMK1
Pls. Help me I just want to install the best custom ROM for my S3 Mini
Thank you so much! Have a good day!
Click to expand...
Click to collapse
See what I wrote in your other thread

use towelroot
go to your browser and go to the "towelroot" website and download the app on your phone. run the app and click root. it will root it in seconds. best way!

Hard Bricked or Soft Bricked

Hi to all,
I'm dumpling year.
When the output of the 4 .3 I was eager to try the shot, I put it and I go to Warrant Knox 0X01
There are some days, I thought I'll try a rom customn in 4.4.
Except that interests me more. I redownload a stock rom 4.3 ... except that I forget more than knox we can downgrade.
I am forced to make a custom rom in 4.3, no worries except to install. It must be gold during installation of, 4.3 stock ROM recovery mode, I had a FAIL of odin and the phone displays FIRMWARE upgrade me Encountered year end
I try to restore it with kies, it crashes at the end of the download.
So, I have access to download mode, no recovery. So I can not install a custom rom.
I try to install CF AUTO ROOT, except that I think I got the wrong file and suddenly the phone will not turn.
Only the Samsung Galaxy SIII 4G logo lights up when I plug in charge.
Should I buy a USB JIG?
Should I take it in for repair?
Should I put it in the trash?
Thank you for all your help
:fingers-crossed:

You don't have an i9300 so have posted in the wrong forum, report your own post and ask a moderator to move it for you.

Valbuena72 said:
Hi to all,
I'm dumpling year.
When the output of the 4 .3 I was eager to try the shot, I put it and I go to Warrant Knox 0X01
There are some days, I thought I'll try a rom customn in 4.4.
Except that interests me more. I redownload a stock rom 4.3 ... except that I forget more than knox we can downgrade.
I am forced to make a custom rom in 4.3, no worries except to install. It must be gold during installation of, 4.3 stock ROM recovery mode, I had a FAIL of odin and the phone displays FIRMWARE upgrade me Encountered year end
I try to restore it with kies, it crashes at the end of the download.
So, I have access to download mode, no recovery. So I can not install a custom rom.
I try to install CF AUTO ROOT, except that I think I got the wrong file and suddenly the phone will not turn.
Only the Samsung Galaxy SIII 4G logo lights up when I plug in charge.
Should I buy a USB JIG?
Should I take it in for repair?
Should I put it in the trash?
Thank you for all your help
:fingers-crossed:
Click to expand...
Click to collapse
your english is so bad i can't understand anything....read a few words think i understood, read next two i realize i don't understand anything

spiderman07 said:
your english is so bad i can't understand anything....read a few words think i understood, read next two i realize i don't understand anything
Click to expand...
Click to collapse
I'm really sorry, I'm French.
I repeated.
I was on stock 4.2 rom at first, then I updated to 4.3 with odin.
Everything functioned very well, and I had the urge to try android 4.4. So I put a custom rom on my S3. This rom not like me, I wanted to return to 4.3 but odin shows me an error message: FAIL!
So I try with mobile odin pro and this is where I reboot the phone and I have the message FIRMWARE UPGRADE AN ISSUE Encountered. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN
I had access to the download mode.
I try KIES emergency mode, kies closes at the end of the download.
I wanted, flash a recovery and I am wrong file.
Now the phone will not turn and when I plug to recharge.
The Samsung logo stuck.
The download mode, recovery is no longer available.

I think i understood your problem,
In summary you flashed a wrong recovery which isn't for your phone and now you can't access both recovery and download mode.
Try buying a usb jig or make one yourself http://forum.xda-developers.com/galaxy-s2/help/guide-how-to-make-usb-jig-reset-binary-t1604707. Maybe it will work.
When you got an error while trying to flash your firmware, you should have tried another one, maybe the one you downloaded was corrupted.
If the usb jig works download another firmware, don't flash the one you got an error with.
Next time you post, post your question in both english and french. There are some people on XDA (including me) who understand french also.

A big thank you Lucas.
I buy this cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=251538206893 (add in front!)
I hope it will work.
By cons, after that. The phone is in download mode.
What do I do next? I can not flash custom rom ... must use a recovery
If I flash a recovery with odin, he will walk you think?
------------ FRENCH POST -------------
Un grand merci Lucas.
J'ai acheter ceci cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=251538206893 (ajouter devant ! )
J'espère que ça fonctionnera.
Par contre, après ça. Le téléphone est en mode download.
Je fais quoi après ? je peux pas flasher de rom custom...faut utiliser un recovery
Si je flash un recovery avec odin, il marchera tu crois ?
Après dans le recovery je flasherai une rom custom 4.3.
Je crois qu'il n'est plus possible d'avoir une rom officielle à cause de Knox.

Valbuena72 said:
A big thank you Lucas.
I buy this cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=251538206893 (add in front!)
I hope it will work.
By cons, after that. The phone is in download mode.
What do I do next? I can not flash custom rom ... must use a recovery
If I flash a recovery with odin, he will walk you think?
------------ FRENCH POST -------------
Un grand merci Lucas.
J'ai acheter ceci cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=251538206893 (ajouter devant ! )
J'espère que ça fonctionnera.
Par contre, après ça. Le téléphone est en mode download.
Je fais quoi après ? je peux pas flasher de rom custom...faut utiliser un recovery
Si je flash un recovery avec odin, il marchera tu crois ?
Après dans le recovery je flasherai une rom custom 4.3.
Je crois qu'il n'est plus possible d'avoir une rom officielle à cause de Knox.
Click to expand...
Click to collapse
If the jig works, your phone will be in download mode, don't flash any custom rom, download an official 4.3 firmware from Sammobile http://www.sammobile.com/firmwares/ for your phone, and use odin to flash it. your phone should work fine after that.

No, that's what I did the first time!
Odin shows me FAIL when flashing, is not it because of Knox?
c'est ce que j'ai fait la première fois !
Odin m'affiche FAIL lors du flashage, n'est ce pas à cause de Knox ?

Valbuena72 said:
No, that's what I did the first time!
Odin shows me FAIL when flashing, is not it because of Knox?
c'est ce que j'ai fait la première fois !
Odin m'affiche FAIL lors du flashage, n'est ce pas à cause de Knox ?
Click to expand...
Click to collapse
I don't think it's due to knox, maybe the firmware you downloaded was corrupted... try downloading another one and flash it.
I haven't updated my phone to any custom 4.4.2 rom. I'm on stock 4.3, maybe someone who has tried it can tell you if it is possible to downgrade to stock 4.3 while having custom 4.4.2 with knox bootloader.

when I do a search for the rom I download I get a 4.1.2: o
I am very surprised.
Thank you, I expected to receive the jig usb! I'll try this one http://www.sammobile.com/firmwares/3/?download=24005

No it isn't
Confirm download
Model: GT-I9305
Model name: GALAXY S III
Country: France
PDA: I9305XXUEMKC
Click to expand...
Click to collapse
I9305XXUEMKC is 4.3
Model: GT-I9305
Model name: GALAXY S III
Country: France
Version: Android 4.3
Changelist: 2051278
Build date: Thu, 28 Nov 2013 04:17:40 +0000
Product Code: XEF
PDA: I9305XXUEMKC
CSC: I9305XEFEMK1
MODEM: I9305XXUEMK1
Click to expand...
Click to collapse
Confirmation

Valbuena72 said:
when I do a search for the rom I download I get a 4.1.2: o
I am very surprised.
Thank you, I expected to receive the jig usb! I'll try this one http://www.sammobile.com/firmwares/3/?download=24005
Click to expand...
Click to collapse
The link you posted is a 4.3 firmware not 4.1.2. You can also try searching a specific 4.3 firmware modified by your carrier.
Good luck in trying to revive your phone :fingers-crossed:

hi,
jig usb does not work unfortunately.
The screen remains blank and only when I plug the charger, samsung galaxy logo appears but remains blocked.
More great solution is not it?
JIG USB ne fonctionne pas malheureusement.
L'écran reste éteint et seulement lorsque je branche le chargeur, le logo samsung galaxy apparait mais reste bloqué.
Plus beaucoup de solution n'est ce pas ?

Valbuena72 said:
hi,
jig usb does not work unfortunately.
The screen remains blank and only when I plug the charger, samsung galaxy logo appears but remains blocked.
More great solution is not it?
JIG USB ne fonctionne pas malheureusement.
L'écran reste éteint et seulement lorsque je branche le chargeur, le logo samsung galaxy apparait mais reste bloqué.
Plus beaucoup de solution n'est ce pas ?
Click to expand...
Click to collapse
As far as I know Jig's don't work with knox-enabled bootloaders. thats what I heard anyway.
This may not work but is worth a try - Remove battery and re-insert, hold home, volume down and power while plugging the phone in to the charger.
I heard some phones still enter download mode with the jig but the screen remains blank, try and do the jig method again and see if your computer recognizes it
If that doesn't work I'm sorry but I think you would have to replace the motherboard