I have a Galaxy Note which has never been rooted and has the factory Gingerbread ROM running.
This morning it worked fine, then a couple of hours later the screen was black and I couldn't turn it on. So I removed and replaced the battery and turned the phone on. Ever since then, and no matter how many times I turn it off/on, it just freezes on the Samsung logo screen with the logo fading in/out.
What's the solution and what has gone wrong with it?
EViS said:
I have a Galaxy Note which has never been rooted and has the factory Gingerbread ROM running.
This morning it worked fine, then a couple of hours later the screen was black and I couldn't turn it on. So I removed and replaced the battery and turned the phone on. Ever since then, and no matter how many times I turn it off/on, it just freezes on the Samsung logo screen with the logo fading in/out.
What's the solution and what has gone wrong with it?
Click to expand...
Click to collapse
I would suggest booting into recovery and doing a factory reset. If that doesn't work use Odin to reflash the stock firmware, and see if that fixes things.
Sent from my SCH-I535 using xda premium
My phone is still in warranty. Am I right in thinking that using ODIN will void the warranty?
How do you boot into recovery on a factory ROM?
instal a stok rom with odin
EViS said:
My phone is still in warranty. Am I right in thinking that using ODIN will void the warranty?
How do you boot into recovery on a factory ROM?
Click to expand...
Click to collapse
Get a stock rom from dr. Ketan's thread in the original development. Press volume down+power+home buttons to boot into download mode then you can flash the rom you got using pc odin. It won't affect the warranty as it will not raise the counter and because you are flashing a stock rom
Sent from my GT-N7000 using xda app-developers app
What could have caused this crash? My only concern is that it could be a hardware memory fault, hence it would be worth sending it out to Samsung just in case.
Just flashed a stock UK ROM via PC Odin.
It showed Pass with the following Messages:
Code:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA6_N7000XXLA4_N7000XEULA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> cache.img
<ID:0/009> NAND Write Start!!
<ID:0/009> factoryfs.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009> zImage
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
However, upon booting the phone is still stuck on the Samsung logo . Any further suggestions?
EViS said:
Just flashed a stock UK ROM via PC Odin.
It showed Pass with the following Messages:
Code:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA6_N7000XXLA4_N7000XEULA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> cache.img
<ID:0/009> NAND Write Start!!
<ID:0/009> factoryfs.img
<ID:0/009> hidden.img
<ID:0/009> modem.bin
<ID:0/009> zImage
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
However, upon booting the phone is still stuck on the Samsung logo . Any further suggestions?
Click to expand...
Click to collapse
Now that you have flashed the stock image, boot into recovery and try a factory reset again.
A factory reset fixed it! Why did I have to do a factory reset AFTER installing the new ROM? Why didn't the new ROM installation work on its own? Looking for a technical answer here .
May be the battery went dead because of which the some data got corrupted.
If I am not wrong it was stuck at the Samsung glowing logo?
data corruption causes boot loops and a factory reset will solve it
the rom you installed was a non wipe rom which does not do a wipe and just upgrades the os to stock so the corrupted data still remained. thus required a reset
Thank you for the explanation .
nokiamodeln91 said:
May be the battery went dead because of which the some data got corrupted.
If I am not wrong it was stuck at the Samsung glowing logo?
data corruption causes boot loops and a factory reset will solve it
the rom you installed was a non wipe rom which does not do a wipe and just upgrades the os to stock so the corrupted data still remained. thus required a reset
Click to expand...
Click to collapse
good explanation:good:
Hi all,
Before I return this device back to Samsung i wanted to check here if anyone had similar Problems or can possibly help with this.
I've never had the Luxury of personally using this Device, the Original Owner bought it and during the OTA it appears something went wrong. Rather than returning it to Samsung directly (they have a notoriously bad reputation of turn around time here) she asked me to have a look at it
Originally it was stuck in a Bootloop of The Intro of the boy looking through the telescope and appearing with the Samsung logo in a recurring Bootloop. Kies (the terrible software it is) is stuck at the connecting screen and doesn't move further than that.
To the jist;
I cant enter Recovery Mode, it takes me directly to the "downloading" screen. I can however boot manually into the Downloading mode. I've tried reflashing the stock recovery with Odin but still won't allow me to get into it, it boots to download mode before I even get a chance to do anything else.
I've tried multiple full firmware's from samsung-updates/sammobile and all drop me back to the same screen (with Odin)
Naturally, I will turn this in to Samsung and wait the time that it takes to have it repaired/replaced for her. I just wanted to know if anyone had any great ideas i could go through before going ahead with this
Thanks in advance
kartoffelpower said:
Hi all,
Before I return this device back to Samsung i wanted to check here if anyone had similar Problems or can possibly help with this.
I've never had the Luxury of personally using this Device, the Original Owner bought it at Duty Free here in Dubai and during the OTA it appears something went wrong. Rather than returning it to Samsung directly (they have a notoriously bad reputation of turn around time here) she asked me to have a look at it
Originally it was stuck in a Bootloop of The Intro of the boy looking through the telescope and appearing with the Samsung logo in a recurring Bootloop. Kies (the terrible software it is) is stuck at the connecting screen and doesn't move further than that.
To the jist;
I cant enter Recovery Mode, it takes me directly to the "downloading" screen. I can however boot manually into the Downloading mode. I've tried reflashing the stock recovery with Odin but still won't allow me to get into it, it boots to download mode before I even get a chance to do anything else.
I've tried multiple full firmware's from samsung-updates/sammobile and all drop me back to the same screen (with Odin)
Naturally, I will turn this in to Samsung and wait the time that it takes to have it repaired/replaced for her. I just wanted to know if anyone had any great ideas i could go through before going ahead with this
Thanks in advance
Click to expand...
Click to collapse
What's the screen you get on Odin? What does it say?
robb13 said:
What's the screen you get on Odin? What does it say?
Click to expand...
Click to collapse
Hi Robb,
Thank you for the reply,
Odin is fine, it flashes without any issues but upon restarting without booting into any special mode, it comes up immediately with "downloading... do not turn of target!!"
When I flash with what i presume would be the correct firmware i get an error (it's bought in Dubai so i figured it was the XSG firmware)
When using the "official XSG" from samsung-updates (zip file EK-GC100_XSG_1_20121121162346) which extracts to GC100XXALK6_GC100OJVALK1_GC100XXALJG_HOME.tar i get this error;
Code:
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GC100XXALK6_GC100OJVALK1_GC100XXALJG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> system.img
<ID:0/016> NAND Write Start!!
<ID:0/016> boot.img
<ID:0/016> cache.img
<ID:0/016> hidden.img
<ID:0/016> recovery.img
<ID:0/016> modem.bin
<ID:0/016>
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
However if i flash with GC100XXALJF_GC100OXAALJF_GC100XXALJG_HOME.tar it is successful but after rebooting, its stuck in download mode,
here from Odin;
Code:
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GC100XXALJF_GC100OXAALJF_GC100XXALJG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> boot.img
<ID:0/016> NAND Write Start!!
<ID:0/016> cache.img
<ID:0/016> hidden.img
<ID:0/016> modem.bin
<ID:0/016> recovery.img
<ID:0/016> system.img
<ID:0/016> RQT_CLOSE !!
<ID:0/016> RES OK !!
<ID:0/016> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/016> Removed!!
<ID:0/016> Added!!
When i boot into download mode/recovery mode myself i'm presented with;
"Odin Mode"
Product Name: EK-GC100_EUR_XX
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Custom
kartoffelpower said:
Hi Robb,
Thank you for the reply,
Odin is fine, it flashes without any issues but upon restarting without booting into any special mode, it comes up immediately with "downloading... do not turn of target!!"
When I flash with what i presume would be the correct firmware i get an error (it's bought in Dubai so i figured it was the XSG firmware)
When using the "official XSG" from samsung-updates (zip file EK-GC100_XSG_1_20121121162346) which extracts to GC100XXALK6_GC100OJVALK1_GC100XXALJG_HOME.tar i get this error;
Code:
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GC100XXALK6_GC100OJVALK1_GC100XXALJG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> system.img
<ID:0/016> NAND Write Start!!
<ID:0/016> boot.img
<ID:0/016> cache.img
<ID:0/016> hidden.img
<ID:0/016> recovery.img
<ID:0/016> modem.bin
<ID:0/016>
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
However if i flash with GC100XXALJF_GC100OXAALJF_GC100XXALJG_HOME.tar it is successful but after rebooting, its stuck in download mode,
here from Odin;
Code:
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GC100XXALJF_GC100OXAALJF_GC100XXALJG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> boot.img
<ID:0/016> NAND Write Start!!
<ID:0/016> cache.img
<ID:0/016> hidden.img
<ID:0/016> modem.bin
<ID:0/016> recovery.img
<ID:0/016> system.img
<ID:0/016> RQT_CLOSE !!
<ID:0/016> RES OK !!
<ID:0/016> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/016> Removed!!
<ID:0/016> Added!!
When i boot into download mode/recovery mode myself i'm presented with;
"Odin Mode"
Product Name: EK-GC100_EUR_XX
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Custom
Click to expand...
Click to collapse
This might help (again, this is why my thread should be a sticky) http://forum.xda-developers.com/showthread.php?t=2086636
Flash the firmware that fails on modem.
Let it fail. Turn off and boot into download mode again.
Then root the camera via odin with the root method Adam gave us.
That flash should go all the way 100%
After this, the camera should work again.
Try it, let us know if it helped.
robb13 said:
This might help (again, this is why my thread should be a sticky) http://forum.xda-developers.com/showthread.php?t=2086636
Flash the firmware that fails on modem.
Let it fail. Turn off and boot into download mode again.
Then root the camera via odin with the root method Adam gave us.
That flash should go all the way 100%
After this, the camera should work again.
Try it, let us know if it helped.
Click to expand...
Click to collapse
Thanks Robb, i've given it a try but it reboots back into Download Mode again
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GC100XXALK6_GC100OJVALK1_GC100XXALJG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> system.img
<ID:0/016> NAND Write Start!!
<ID:0/016> boot.img
<ID:0/016> cache.img
<ID:0/016> hidden.img
<ID:0/016> recovery.img
<ID:0/016> modem.bin
<ID:0/016>
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/016> Removed!!
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-gd1-gd1xx-ekgc100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> recovery.img
<ID:0/016> NAND Write Start!!
<ID:0/016> cache.img
<ID:0/016> RQT_CLOSE !!
<ID:0/016> RES OK !!
<ID:0/016> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/016> Removed!!
<ID:0/016> Added!!
I even did a further step of removing modem.bin from the failed tar and repackaging it and reflashing, still returns back to downloading mode.
I do however now have Custom Binary Download: Yes
Downloading Adam's suggested JellyBean 4.1.1 build:GC100XXALK1 and will see if that works for me.
Have you tried getting into recovery?
Sent from my GT-N7100 using Tapatalk 2
RavenY2K3 said:
Have you tried getting into recovery?
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
I wish i could enter recovery but it no longer works, it takes me straight into downloading mode (even when using the Recovery mode combo when turning the camera on). This download mode is slightly different from the Download Mode launched with the combination, it only shows the Android Avatar + Downloading.... do not turn off target !!. (No odin, no flash counters, etc)
kartoffelpower said:
I wish i could enter recovery but it no longer works, it takes me straight into downloading mode (even when using the Recovery mode combo when turning the camera on). This download mode is slightly different from the Download Mode launched with the combination, it only shows the Android Avatar + Downloading.... do not turn off target !!. (No odin, no flash counters, etc)
Click to expand...
Click to collapse
What about trying to reflash just the recovery alone, stock that is and see if it kicks it into booting into it, to try a wipe perhaps, I've got the stock recovery if you want to give it a try?
Sent from my GT-N7100 using Tapatalk 2
RavenY2K3 said:
What about trying to reflash just the recovery alone, stock that is and see if it kicks it into booting into it, to try a wipe perhaps, I've got the stock recovery if you want to give it a try?
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
I tried the stock recovery recovery-stock-bll7-EKGC100 without any luck. Now after recent reflashing the camera boots to a white screen rather than downloading mode.I can still boot to download mode with the combination, the flashing counter has been reset but now also i can't flash ANYTHING onto it, got some new nifty error
Code:
<ID:0/017> Added!!
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017>
<ID:0/017> There is no PIT partition.
I tried using the PIT file from Adam over at thispost but it throws me
Code:
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017>
<ID:0/017> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Having some fun with this device, will return it after the weekend if nothing works out, happy to any suggestions though
Thanks to everyone for the help so far
Sounds completely FUBAR, how did you clear the counter or did it do on it's own/by accident? haha.
Sent from my GT-N7100 using Tapatalk 2
RavenY2K3 said:
Sounds completely FUBAR, how did you clear the counter or did it do on it's own/by accident? haha.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, now that i can't flash roms at all withotu a valid PIT this camera has definitely reached its point where I will be turning it in to the Service center after the weekend.
The Counter Reset itself, i'm guessing once the partitions disappeared it took the count with it too ;-P
kartoffelpower said:
The Counter Reset itself, i'm guessing once the partitions disappeared it took the count with it too ;-P
Click to expand...
Click to collapse
Well..... Every cloud and all that haha
Sent from my GT-P7500 using Tapatalk HD
My GC2 EK-GC200 has same issue
I cant flash any firmware on my GC2, odin alway failed on system.img ... Please give me PIT file of Samsung EK-GC200
Hi,
I recently bought my Galaxy s4 Active i9295.
After I had updated the phone with the newest software from android/google,I tried to install a custom rom.
I was'nt happy with it and wanted to get back to factory.
Unfortuneatly I can't manage to do it.
I went into CWM and cleared everthing, cache etc..I'm not sure what i pressed to be honest.
Now I'm panicing a little, afraid of my phone getting bricked.
When I boot my phone now it's stuck at the Samsun Galaxy screen with a red text im the top left corner which says
"KERNEL IS NOT SEANDROID ENFORING"
I can still go into recovery mode and download mode.
After this I have tried to install this file via ODIN (v3.07). It gives me this:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9295XXUBMK3_I9295TENBMK1_I9295XXUBMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I'm stuck now. With no idea what to do. I have done a custom rom on my s2 before and nothing went wrong when i tried to get it back to factory.
I have tried to read other threads but got nothing from them. There might be some I have'nt watched yet.
Is there anyone that has knowlede of what to do?
I appreciate any replys.
PS:
I'm not very experienced so please tell me if something seems weird in my explenation
And English is not my 1.st language.
Hey guys need a little help here, i just bought a motherboard for my girlfriends s5, the old one seemed to overheated and died, yeah seriously. was just sitting on the bed.
I just spent $100 to get an AT&T Mobo, cracked open the phone and installed it. (The LCD is really thin, but to my suprise is really strong)
Stock Android 5.0 L, tried to to downgrade to 4.4.4, realize i cant now because of locked bootloader. trying to just restore back to Android 5 now.
Recovery mode presents " Firmware upgrade encountered an issue, Please select recovery mode in kies"
Download mode presents " SW Rev Check Fail : [aboot] fused > 4 Binary 3 "
I suppose this is because i flashed 4.4.2 in Odin the following
AP, CP, CSC
BL was NOT flashed!
Currently tried to find BL, AP, CP and CSC for 5.0 L, figure it would solve the problem
However my google-fuu leads me no awnsers, Closest thing i could find was.
theandroidsoul dot com /att-galaxy-s5-lollipop-update-odin-firmware-80652/
looks like it will flash 5.0 software, but.
My odin fails everytime i try, I have tried this on two computers, Windows 7 & 8
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> One Click Downloader Mode
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003>
<ID:0/003>
<OSM> All threads completed. (succeed 0 / failed 1)
I really dont think its a driver issue., tried multiple cables.
Thanks
Hi,
I got myself a Samsung Galaxy SM-T900.
it originally would boot up into GREY battery icon and then apparently switch off although I could see the backlight was dimly on.
( So may have battery or USB charging port problems as well)
It was reporting a custom rom state so I thought I would put it back to stock and actually managed to flash it with Odin 3.10 ( which worked i.e. reported GREEN)
Rom file is T900XXSBPL3_T900OXABOH4_HOME.tar.md5 from Sam Mobile.
Although I got a GREEN light from Odin.... on tablet boot up, the tablet reported " Firmware upgrade encountered an issue...……….in Kies and try again"
Kies (2.6) would not connect to the tablet, nor could I do an emergency firmware recovery as no device comes up in the device list.
So I decided to reflash the stock rom with Odin 3.10 which was a bad move. For some unknown reason it stopped flashing at about halfway.
So I restarted the flash and now always get stuck on
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T900XXSBPL3_T900OXABOH4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin engine v(ID:3.1005)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> sboot.bin
<ID:0/013> NAND Write Start!!
<ID:0/013> FAIL!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Could someone please help... I am a casual ROM updater and just follow instructions , but now I am completely stuck.
Thanks
Hi,
Could someone please point me to the PIT file for this SM-T900 UK ROM i.e. BTU
T900XXSBPL3_T900OXABOH4_HOME.tar.md5 from SamMobile for SM-T900
I suspect its in there, but I think I may have corrupted my partitions, so need a PIT file...… I think?
Thanks