I am a bit cautious, I come from a brick bootloader locked.
I have put in care JM2, rooted and patched the bootloader with the patch XDA.
Can i installa CWR directly with ROM MANAGER?
Related
Hello.
So i've got a problem with my I9000.
I've upgraded it to froyo, official release, so i'm stuck with the 3e recovery.I recently flashed the voodoo lagfix kernel via Odin. I would like to get clockwork recovery to replace 3e, but I understand i have to flash it via Odin, too. My question is : Is clockwork's kernel going to replace voodoo? If so, how can i have them both?
Thanks a lot in advance.
if you upgrade offical froyo then u must first do a root..the root files can be find here http://forum.xda-developers.com/showthread.php?t=788108...download correct root for your firmwire phone...then flash it tru odin..when u done with that u must download a rom manager from market...and install it to get clockwork mode =)
I wouldn't follow the previous poster's advice.
If you're going to use cwm, why do you want stock firmware? Try flashing speedmod kernel to get cwm, which has built in root and lagfix accesable from recovery. Or just go to a custom fw like docrom kitchen.
Best procedure for going custom with the sgs is a single flash of speedmod w/ cwm from odin, and then flash anything else via cwm.
Sent from xda premium app on i9000m.
i insert a file named sgt-boatloader-patch-v1.00.apk to break my galaxy tab device protection but i regreted because after that i lost my recovery mood and can not go to recovery as when i tried the screen turns into longtudinal coloured lines,also kies not recognized, tried to remove the file but fail,.,.also i made usb format but no value.....all what i need is to return to recovery system to reboot and to format,,,,please dont ignore me
Can you get into download mode then install a rom via odin. I did something similar and this fixed it.
also got this problem, but now fixed. have a look here.
http://forum.xda-developers.com/showpost.php?p=23714736&postcount=7
That bootloader patch didn't cause those lines. They come from flashing a kernel that has unsigned bootloaders.
You need a complete flash with a .pit file and repartition. Go to teamovercome.net, downloads, stock safe gingerbread. Get the instructions guide while you are there also. After you repair your bootloader, you can flash any other rom you wish, or just stick with the stock gingerbread.
[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!
Odin doesnt care about whats currently on your phone . Just go to samfirmware. Com, find a nice stock rom (2.3.3) for i9000, and flash it with odin. If you dont know how to use odin: use the search button in the i9000 section ''how to use odin''. keep us updated / or if you have any other questions :thumbup:
Stoux
Edit: Check this thread out http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using xda premium
hey
when i screwed my sgs, odin + darky ressurection rom helped
i can't post a link , google "Darkys_v9.2_Resurrection_Edition.zip" ,though i can't remember if i used that version. some got removed, try to look for a sourceforge link. That still works
and see the reply above how to use odin
Hey,
There are also lots of tutorials on youtube, and other sites to show how to flash an original rom. I also screwed up my install of CM9. And then I followed this guide to get the original rom running again.
w w w.theandroidsoul.com/download-install-xxjvs-firmware-update-galaxy-s-i9000-to-android-2-3-5/
After that, use this link for rooting + CWM:
w w w.theandroidsoul.com/root-xxjvs/
Greets from Holland !
PS: can't link -_- so you have to copy and paste the URL.
Skeesicks said:
[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!
Click to expand...
Click to collapse
hmmm... i read from another site there are some custom rom that requires the phone to be in a rooted stock rom or another custom rom...
example:
to install Galaxy S GT I9000 with Orange Amestris v7.3 ROM Custom Firmware you need to be on stock XWJW1 or XXJVU Firmware since the baseband of "amestris" would be on xwjw1 or xxjvu or custom rom with the same baseband...
what stock rom/firmware the phone was in anyway?im guessing gingerbread stock rom? you still got a chance to update it right since you can access download mode...
from what i can remember, i updated my boyfrnd's s2 from gingerbread to official ics from "sammobile".com (remove quote)
then updated it to a custom rom...
well this might be irrelevant but this is how i updated my galaxy s:
well on my galaxy s i updated it from gingerbread stock rom rooted to gingerbread miui then to ics miui andy's version, since im on ics i have successfully tried different ics custom rom like darknight, slimics, elite etc...
hope this kinda help =]
Thanks a lot...I flashed the original firmware (it didn't start properly, but I don't care) and with this was able to flash the zImage again...then I was able to access bootloader and reinstall CM9
Guys,
i really need help....someone......please
I have the galaxy s i9000
It is on stock 2.1 update 1
i have rooted it....but the sad part is that it is the model that came with the bootloader locked....
I have, however, found a way to solve that.....
My question is:
I could unlock the bootloader..using the 3-button fix...which involves installing a tar file of the secondary bootloader using odin....
Then, i thought i can download the zip file for cwm for my device...and flash it using the recovery....
How can i do that??
Is it a viable option?
And lastly, can i install cm 7 on stock 2.1
If not, please please please help me out....it is really urgent...
Someone....please!!
Cheers
I think that you have to flash a JVU with Odin and get a CFROOT kernel. If you begin to this you should be able to flash other roms.
hello there xda users
i have recently bricked my phone and managed to reflash the firmware, but, i had to add the bootloader file with the split firmware package.
what i want to do is install the latest XXLD3 firmware on top of the current s5830ixxkk5/gingerbread.xxlk1 firmware package but im worried because i am thinking that the bootloader file has to be the same as the firmware if you know what i mean. can i install the xxld3 on the xxkk5 bootloader without bricking my phone again? any help would be appreciated. thanks
kierantheking said:
hello there xda users
i have recently bricked my phone and managed to reflash the firmware, but, i had to add the bootloader file with the split firmware package.
what i want to do is install the latest XXLD3 firmware on top of the current s5830ixxkk5/gingerbread.xxlk1 firmware package but im worried because i am thinking that the bootloader file has to be the same as the firmware if you know what i mean. can i install the xxld3 on the xxkk5 bootloader without bricking my phone again? any help would be appreciated. thanks
Click to expand...
Click to collapse
I think you can try by flashing complete (3 files package) of XXLD3 via odin & then flash only the bootloader file of XXKK5 via odin. I have not tried it before and i'm not sure but i think it should work. In worst case you can always revert to XXKK5 via odin, as long as you can access the download/odin mode :good: