Well, i decided that i would attempt to boot android on my pure. The process went great. Finally it boots, and the screen is responsive when u go up and down to change screens but when you try to select the show all apps its unresponsive. I locked it and the lockscreen is unresponsive. What do I do? I can't figure out what is wrong with it. Please help me!
Go back to WM and delete the file called ts-calibration. run haret and at one point it'll ask you to do the screen calibration again. then it should work. also, use SpareParts to have the end/power button mapping fixed..
** oh yeah, next time post in the android section if you want a reply..
Related
When I first got my g1 I loved it. Then the cupcake update happened. Everyone was overjoyed - except me. My phone went much slower and juddery, and loads of little errors happened. Now these are the 2 problems i need help with:
Rotating. The phone stays in either portrait or landscape mode and won't rotate to the correct mode with the keyboard sliding in or out.
And
Messaging. Whenever I send an sms message i get a force error as soon as the text is sent through.
PLEASE HELP ME :'( :'( before i go to t-mobile and cancel my phone - it has got that bad ((((((((((((((((((((((
If you need anymore info just ask thanks,
Ross.
You might want to try re-flashing the cupcake update, if your phone is rooted then you can search around and find out how to do it easily. If not you need to find the official tmobile cupcake update, I dont have any link for it but I am sure if you search here or google you will find it. You then need to plug your g1 into the usb on your pc and mount the sd card, if it is a .nbh file name it DREAMIMG.nbh, if its a .zip name it update.zip and copy it over. Then reboot into spl by holding camera+power and follow onscreen instructions. Good luck.
Try doing a wipe and see if that fixes your problems.
If wiping doesnt fix your problem id hit t mobile up for a replacement
i will try to be as detailed as possible. im coming from the kaiser community so go easy on me
when i had recieved the phone it would turn on go past the tmobile g1 screen and go into the recovery console. the console read. JF 1.41.
after reading around the best option i got was reverting everything back to factory settings.....and so i did. i installed the factory spl went back to rc29....then updated to rc 30 and installed the new cupcake.
everything was fine except for i couldnt get the phone activated given im an AT&T user.
this morning i finally recieved the unlock code from tmobile and when i turn the phone on with the att simcard, it gave me the triangle with the exclamation screen.
so i hit alt +l then alt w and after a reboot it would bring me back to the same screen. Also this recovery screen is diff from the jf 1.41 (im guessing this is the factory console).
now im out of ideas as to how to get this phone back in order. i would love flashing the DREAIMG.NBH but sadly my phone refuses to go in bootloader.
ive been trying to hold camera+ power and its jsut loads up the tmobile g1 screen.
any and all advice/helps are appreciated.
-thank you
so this is totally weird. i leave the phone unplugged with the battery out for about 3 hours. came back to work on it....turned it on and well it loaded and got me to the home screen ( no sim card ).
so i powered off the phone and inserted the AT&T simcard turn it on and it shows me the same screen again with the triangle and exclamation point.
how do u explain that ?!
pressed power for 3 seconds and then let go and held down the back key. it flashed the bootloader tricolor screen and then said ""everything will be reset to factory defaults .press send to reset"" and when i did that there was no change........nothing happened. ended up pulling the battery out..
Same problem..
I have very similar problem.. but mine takes much more than 3 hrs to come back.. and even then , the task manger keeps popping up from time to time in the home screen ,, so i guessed my home button was stuck or something...
After i found your "problem Sovled" post in another theread on 11th oct ..i thought i better take your suggestion before taking phone apart..
I was on 1.5 version and 2.22.19.26I radio. also i do not know whether i'm in RC29,30,33 ..
i'm really confused about all this radio,firmware ,recovery things....
Please Guide me ..
well first you need to get in your ph to find out if u have rc29. if you are able to get to home screen just hit menu - setting - about phone - all the way down it'll tell you what you are running.
i followed this guide to help me flash it to the cyanogenmod rom
http://forum.xda-developers.com/showthread.php?t=563679
hopefully it helps. but if you are able to get into bootloader unlike me then jsut flash the rc29 hopefully it will solve your problem.
my home key acted like it was stuck but now everything is working fine.
Thanks for Replying so quickly ..
I managed to go to the bootloader screen(tricolor) ..actually it went without even pressing the camera button(any idea why??) after leaving the phone without battery for about 5 hours.. and i flashed the Dreaimg-RC29 file .
Since then i'm Stuck in recovery mode again.. but this time the recovery utility is different (yellow letters)..i.e hopefully RC29 is succefully installed.
I wanted to complete doing your suggested guide before asking any more questions, but now i unable to so what shud i do now?
IS the task manger popping up involuntarily sometimes for you in the cM builds?
Can it be that you had a hardware button issue, which somehow rectified itself when going to Cyanogen..
I really appreciate your taking time to answer my questions ..
well sounds like jsut what had happened to me.
make sure you have tmobile simcard on you with a dataplan.
you're going to have to leave your phone off without the battery or just turned off for a while. from here on out it was trial and error. i kept trying to turn the phone on hoping it would go past the recovery screen once it did i activated the phone and finally completed the root process.
as for the cyanogen mod rom i think you are right. though on my initial flash i had a bunch of force closing apps but it all fixed itself upon a restart. ever since then i haven't seen the recovery mode every time i boot it.
PS: that reocvery mode that you see is the stock recovery meaning yes u have flashed RC29 sucessfully.
so i jsut flashed to CM 4.2.3.1. and well im back to square one. im booting into the recovery by default. obviously confirming my doubts about the hardware problem.
im going to try and leave the phone off for a while and see if i can get it to load up. usually that solves my problem.
Oh..
Thats depressing.. Anyways... Lets do it together then I have kept my phone unsed for about 16hrs now.. hope it works ..
Have you tried the HTC Diagonistic program for g1 (DREADIAG.nbh) ?.. I am yet to try it out as i cannot go to the bootloader..
http://www.megaupload.com/?d=7NRX7H40
which version of cyanogen were you using before this happened?
i have not tried diagnostic. iw as going to use ADB to push the recovery on there but it went into bootloader.
i was using cyanogenmod rom 4.1.9999. now i have updated to 4.2.3.1.
actually iw as working on it last night. i re did that whole guide except for downloaded the new rom and flashed it.
so as of now once again that hardware flaw is gone and the phone is working fine.
mtkhalid said:
i have not tried diagnostic. iw as going to use ADB to push the recovery on there but it went into bootloader.
i was using cyanogenmod rom 4.1.9999. now i have updated to 4.2.3.1.
actually iw as working on it last night. i re did that whole guide except for downloaded the new rom and flashed it.
so as of now once again that hardware flaw is gone and the phone is working fine.
Click to expand...
Click to collapse
Did you update from 4.1.9999 straight into 4.2.3.1? If so, that's the problem (maybe).. I suggest you install the HTC 1.6 ADP Rom (link in the cyanogen 4.2.3.1 post) then upgrade to 4.2.3.1. Make sure everything is updated.... rom, recovery & spl (before you upgrade SPL make sure you have the most recent radio version first! or you'll brick the phone). then give it a try and see what happens...
you are right. the first time i just flashed the new rom. the second time around i followed the guide except for i flashed the latest cyanogen rom.
I'm not able to make it go to the home screen even after so many attempts..
i could only manage to go to the bootloader screen once and flashed the RC29 and i'm stuck there
Can you elaborate on how you got to the Home screen , like how long you keep it off or press which buttons to start ?
I'm not in the US , and have bought this phone from Ebay (new, never used) from a seller with good feedback for G1 (wanted this phone very badly). I was using the phone for barely 3 days when i did a factory reset from the phone and this problem started occurring .
IS there anything else i can do..?
Thanks for Helping..
Still waiting for your answer
SaiSantoshD said:
I'm not able to make it go to the home screen even after so many attempts..
i could only manage to go to the bootloader screen once and flashed the RC29 and i'm stuck there
Can you elaborate on how you got to the Home screen , like how long you keep it off or press which buttons to start ?
I'm not in the US , and have bought this phone from Ebay (new, never used) from a seller with good feedback for G1 (wanted this phone very badly). I was using the phone for barely 3 days when i did a factory reset from the phone and this problem started occurring .
IS there anything else i can do..?
Thanks for Helping..
Click to expand...
Click to collapse
how did you flash the RC29? after pressing the power button
did it give you any errors? once its flashed, reboot by pressing home and back (or w/e the SPL tells you to)
it should boot into the rom
Home button problem (repaired/solved)
Firstly, thanks for responding ..
I had flashed RC29 when it had gone to the tricolor bootloader screen on its own
but after that it would not go anywhere other than recovery(exclamantion mark)
Now good news
4 hours back i opened the phone again(third time) , and took a safety pin and started scraping(gently) the non shiny parts of the connector ( daughter board to main board) .
I think it was previously shorted near that area , so by scraping removed the shorted metal joints .. and now the phone booted up to RC29 (just like that) and i even installed the cyanogen mod ..
Many thanks to u all .. hope this Comes UP in google search for people with similar problems(and there are many)...
KEYwords: Home button stuck on recovery no booting
Ah wow didnt think of that lol.. glad to see you got it to work
Hello,
A friend of mines recently gave me her HTC Legend because it was stuck on some loading screen.
It's isn't rooted.
She tried the OTA update for her device and since she did so, when the phone start, it doesn't ask for her pin code or what so ever, sense boot up, and then it keeps getting stuck on the loading screen when sense should appears.
Then after a few secondes it says : com.android.phone couldn't boot. Do you want to wait, force close, or send report.
I can handle my HTC hero but her legend seems different.. + without custom recovery I don't even now how to wipe or anything.
Anyway, could you FIRST tell me if there is a way, to try to re-apply the update (OTA not possible anymore since sense doesn t boot..).. or is there any chance not to wipe the phone ( cause she hasn t saved her contacts, messages etc)..
And if not.. how can I hard reset her phone (step by step please)
Thanks in advance guys!!
Use a search in the forums for the appropriate RUU.
Also, do not post questions in the development section.
Sent from my HTC Legend using XDA App
Oups sorry, can a moderator move the thread?
Once i have the official RUU.. how can i flash it without a custom recovery?
I get exactly the same thing pull your sim car out start the phone up and complete all of the set up screens once you are into android turn phone off put sim back in it should work fine, but you will get a message about the sim being chanmged press clear if you press to change settings you will get another error and dont go into the apn settings or things get a little bit messy
To flash your carriers RUU, you may need a "goldcard" but turn off your phone and press the back button and power on the phone,to get to the fastboot screen, connect the phone to your pc and run the RUU.
Sent from my HTC Legend using XDA App
If she recently updated to 2.2, then that's the problem. Plenty of people (me included) had this issue. No need to re-apply the OTA update or (re-)flash a ROM, just sync her contacts/calendar/mail to Google and backup apps via Astro.
Then do a factory reset and re-sync/install from backup. That's all it takes. Works like a charm after! ;-)
Hey guys
I managed to root my device with the first guide (oneclick) and uninstalled alot of LG crap, same time i uninstalled the LG launcer. - Today i got a problem with my device. I couldnt ring and hear people when i manged to get in contact.
I decided to factory reset the phone, but my problem is that i dont have any launcher now. When i do the hard reset thing (vol down + home and power on) i can get to the screen where i can type in pin code, but after that there is black screen cause there is no launcher. The search function dont work but the notification bar is working. so i cant get to the market and install. Mostly it just shows the LG logo when the phone is turned on and the touch screen is working cause it makes the click sound. But nothing else.
Does some one have an idea to how i can get a launcher installed ??
thanks in advance
Please use search function. This problem is already discussed here. You have to use ADB.
Sent from my LG-P990 using XDA Premium App
Sorry the other threads i found was about how to get other launchers. But i will try read deeper into to threads then ;(
nafaikon said:
Hey guys
I managed to root my device with the first guide (oneclick) and uninstalled alot of LG crap, same time i uninstalled the LG launcer. - Today i got a problem with my device. I couldnt ring and hear people when i manged to get in contact.
I decided to factory reset the phone, but my problem is that i dont have any launcher now. When i do the hard reset thing (vol down + home and power on) i can get to the screen where i can type in pin code, but after that there is black screen cause there is no launcher. The search function dont work but the notification bar is working. so i cant get to the market and install. Mostly it just shows the LG logo when the phone is turned on and the touch screen is working cause it makes the click sound. But nothing else.
Does some one have an idea to how i can get a launcher installed ??
thanks in advance
Click to expand...
Click to collapse
Hello my fren.. Did u in the 1st place had made backup or ur rom via nandroid before removing stuff from ur rom? If yes then its too bad.. But there is always an alternative..
1. Download a custom available here and place it in ur mmc card.
2. I presume that u have paulobrien 3.0.1.4 r1 - ClockworkMod Recovery for the LG Optimus 2X installed then flash it via clockwork.
3. Enjoy ur new fast phone!!
naah i did not backup.. thought i would never need it.. but i was wrong..
so here is what i did.
When the nortification bar was working i went into the musicplayer from there, in there i managed to get the search funtion in albums wich gave me the opportunity to search on the internet via the browser (wich i could not open or find cause no launcher ).
I went to 4shared from there and found a launcher but i could not install it because the installing from other source funtions was disabled. Fortunately it gave me the option so i could enable it and i did.. AND YEEEHA i manged to install a launcher and retsarted and it dos work !!!
Before when i pressed the home button it just restarted the phone i could do nothing ! only black screen with logo.. so i reset it and tried the above...
it seems that my phone is still rooted, cause i have the "superuser" thing but when i get time i will unroot it and sell this crap of a device and get back my old Nokia N8 again
Don't just root your phone without learning how to actually use the powers it gives you. If you remove anything from /system you will not be able to restore it with factory reset, because factory reset relies on what is in /system. But I guess you figured that out the hard way.
Learn to use ADB and nvflash, nvflash being the easiest based on the guides at 2x.modaco.com. ADB can get you out of most trouble by editing/replacing single files and nvflash will enable you to overwrite all partitions, i.e. with a stock ROM.
Everything you need is in these forums or in the wiki.
yea the hardway was more fun ;-) (actually not )
I was trying the ADB way, but my computer didn regonize the phone so it was difficult
Now i just need the stock apps and launcher so i can unroot it again
start off with this page:
http://android.modaco.com/content/l...rom-release-v10b-dated-1300166062-15-03-2011/
once you have restored the stock rom you can now delete the clockwork recovery by using this:
http://forum.xda-developers.com/showthread.php?t=1021554
after that unroot in superoneclick and your all done.
nafaikon said:
naah i did not backup.. thought i would never need it.. but i was wrong..
so here is what i did.
When the nortification bar was working i went into the musicplayer from there, in there i managed to get the search funtion in albums wich gave me the opportunity to search on the internet via the browser (wich i could not open or find cause no launcher ).
I went to 4shared from there and found a launcher but i could not install it because the installing from other source funtions was disabled. Fortunately it gave me the option so i could enable it and i did.. AND YEEEHA i manged to install a launcher and retsarted and it dos work !!!
Before when i pressed the home button it just restarted the phone i could do nothing ! only black screen with logo.. so i reset it and tried the above...
it seems that my phone is still rooted, cause i have the "superuser" thing but when i get time i will unroot it and sell this crap of a device and get back my old Nokia N8 again
Click to expand...
Click to collapse
What do you want for the phone - lol?
Funny how when ever some user messes up something - then its the device that is crap
Ehmm the deivce is crap... the sounds is terrible.. and the reason why i messed up was i had problems with the device. When i call some one they cant hear me and i cant hear them.. same with income.. but i can text msg.. and its not my carrier or other stuff.. it is the ceappy device ;-)
[Q] Perpetual "System UI has stopped working" message after changing boot animation
After changing the boot animation on my Moto X by using Matthew Pierces program Mbat my phone perpetually receives the message "unfortunately, the process com.android.systemui has stopped" on startup. If I select Ok the message reappears shortly and prevents me from using my phone for more than a few seconds. When I tried to revert to stock boot animation using the program, the program tells me rm failed for /data/moodle/bootanimation.zip Any help on how to fix this???? Thanks
indecisivewhippet said:
After changing the boot animation on my Moto X by using Matthew Pierces program Mbat my phone perpetually receives the message "unfortunately, the process com.android.systemui has stopped" on startup. If I select Ok the message reappears shortly and prevents me from using my phone for more than a few seconds. When I tried to revert to stock boot animation using the program, the program tells me rm failed for /data/moodle/bootanimation.zip Any help on how to fix this???? Thanks
Click to expand...
Click to collapse
I have some questions for you before i can help you out
What Carrier is your Moto X
Is your Bootloader unlocked
what version of Android are you on
Moving on....
OK next what ever program you used stay away from it uninstall it asap.
Next i would download this program for locked bootloaders. to change boot animations
http://forum.xda-developers.com/showthread.php?t=2590034
read the Whole first post before you do anything at all. that way you know how the app works and what to do.
Next lets get you a Bootiescreen from this thread.
http://forum.xda-developers.com/showthread.php?t=2417961
i know these ones work correctly.
so get everything installed and install your new BootieScreen and see if that stops the system-UI error.
If not we are going to move on to more drastic options
If you have a nandroid backup then this would be your next option if the above dose not fix your error.
if you don't have a nandroid back up then i would do a factory Reset or reinstall your firmware via RSD Lite or Bootloader/fastboot method and i know that will fix the issues.
Good luck i hope the first option fixes the issues so you dont have to start from scratch
dray_jr said:
I have some questions for you before i can help you out
What Carrier is your Moto X
Is your Bootloader unlocked
what version of Android are you on
Moving on....
OK next what ever program you used stay away from it uninstall it asap.
Next i would download this program for locked bootloaders. to change boot animations
http://forum.xda-developers.com/showthread.php?t=2590034
read the Whole first post before you do anything at all. that way you know how the app works and what to do.
Next lets get you a Bootiescreen from this thread.
http://forum.xda-developers.com/showthread.php?t=2417961
i know these ones work correctly.
so get everything installed and install your new BootieScreen and see if that stops the system-UI error.
If not we are going to move on to more drastic options
If you have a nandroid backup then this would be your next option if the above dose not fix your error.
if you don't have a nandroid back up then i would do a factory Reset or reinstall your firmware via RSD Lite or Bootloader/fastboot method and i know that will fix the issues.
Good luck i hope the first option fixes the issues so you dont have to start from scratch
Click to expand...
Click to collapse
Hello!
Thank for the really detailed response and all the help, but I just figured it out. It turns out that it was a problem with one of the modules I downloaded for the Xposed Framework. The module I downloaded wasn't compatible with my device but I didn't realize this until I rebooted my device to change the boot animation. Once I figured this out I was able to flash the Xposed-Disabler.zip and return to stock with no problems. Thanks again for all the help and I will definitely use those provided links to change my boot animation.