Related
hi to all again
I've just been looking at some more rom's for my sgs but i'm haveing some trouble trying to find the right way to get Simply Honey 3.8 Revolution on my phone.
I am currently running:
Firmware: 2.2.2
Baseband: I9000XXJVE
Kernel: 2.6.32.9
[email protected]#22
Build: Darky's v9.5.XWJS8
So if you could please point me in the right direction.
Cheers madant2011
1- Disable lagfix if you are using it, backup EFS, etc.
2- Flash stock JVP via ODIN
3- Flash CFroot kernel via Odin
4- Flash GingerHoney via CWM
Thanks for your help, I'm all done now exeped for which is the best kerrnel to run and were to get it from.
cheers again
madant
Im usin dark core 2.7.3 as my kernel waitin for more stable ones to comeout before changin bt im not sure if dark core wrks for ur rom
Sent from my GT-I9000 using XDA Premium App
Press Thanks If This Helped!
I have a question about kernel. Now i'm running cf root kernel...btw i want to change bootanimation so i have to change kernel too. If i change kernel, do i lose root access? what about applications i have installed? Before flashing new kernel do i have to remove lagfix/ext4 or can i leave it?
Thanks for help
Sent from my GT-I9000 using XDA App
Drollo85 said:
I have a question about kernel. Now i'm running cf root kernel...btw i want to change bootanimation so i have to change kernel too. If i change kernel, do i lose root access? what about applications i have installed? Before flashing new kernel do i have to remove lagfix/ext4 or can i leave it?
Thanks for help
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Changing of bootanimation does not require u to change ur kernel.Changing of kernel will not make u lose ur root access.Only changing of roms make u lose ur apps unless u install (no wipe) roms.Before changing kernel u need to disable lagfix before changin kernel to prevent problems appearing
Sent from my GT-I9000 using XDA Premium App
Press Thanks If This Helped!
Are you sure is not required? i've seen everywhere that only some kernels supports changing of bootanimation. How can i change bootanim w/o flashing new kernel?
Sent from my GT-I9000 using XDA App
Not all kernels support changing the bootanimation.
Sent from my GT-I9000 using XDA Premium App
Drollo85 said:
Are you sure is not required? i've seen everywhere that only some kernels supports changing of bootanimation. How can i change bootanim w/o flashing new kernel?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Hmm bootanimations just need to be stored somewhere in ur phone bt some kenels read different names not bootanimations.zip.
Sent from my GT-I9000 using XDA Premium App
Press Thanks If This Helped!
Try absolute system tools for great interface with previews and massive choice of boot animations
Is that an app available on market?
Sent from my GT-I9000 using XDA App
Anyway the problem is not where/how to place .zip file... The problem is that lot of kernels don't recognize .zip bootanimations, but just .qmg boots.
Sent from my GT-I9000 using XDA App
Drollo85 said:
Anyway the problem is not where/how to place .zip file... The problem is that lot of kernels don't recognize .zip bootanimations, but just .qmg boots.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Only some kernel recognise them u can ask in their thread.
Sent from my GT-I9000 using XDA Premium App
Press Thanks If This Helped!
I have Galaxy Tab (GT-P1000) with Android 2.3.6 (stock rom) altready rooted.
I want to install ClockWorkMod Recovery...
I think I have to flash a kernel with CWM... So I want to install this kernel...
http://forum.xda-developers.com/showthread.php?t=943669
I have Odin... What I have to do?
Thanks!
You may try this
http://forum.xda-developers.com/showthread.php?t=1460327
Sent from my GT-P1000 using XDA Premium App
Beforecyou upgrade to cwm5 make sure you have the rom and kernal already on your sd card.it will make it easier for you.trust me I lewdned the hardway.just savjng you the headache
Sent from my SCH-I800 using XDA App
hambalos said:
You may try this
http://forum.xda-developers.com/showthread.php?t=1460327
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
It work!
Thank you very much!
For others 'n00b' that want to install only a custom kernel...
Use Odin, flash kernel (a .tar file with inside "zImage") use PDA.
After reboot, wait a long.
I just bought a captivate. I rooted and unlocked it ( now t- mobile) . When I go to rom manager to make a recovery it doesn't recognize my device. Only gives option for i9000, epic, fascinate. What do I need to do to make a backup/ recovery?
Sent from my SGH-T959 using xda premium
Unfortunately there isn't an official clockworkmod recovery for the captivate. You'll need to either flash a kernel with cwm already embedded, or manually load up cwm on your SD card. What stock ROM are you on atm?
Sent from my AOKP icy-glitched Captivate via Tapatalk 2
Sorry you sorta wrong on some things. There isn't official CWM for GB or Froyo. But there is for Eclair. Sounds like he is on GB at the moment. You are correct about having to flash a kernel with CWM in it.
I stand corrected...but yes unless your still on eclair or restore back to eclair, there isn't an official cwm
Sent from my AOKP icy-glitched Captivate via Tapatalk 2
Yea, I am on GB 2.3.5 baseband UCKK4. I also have a vibrant.I am really surprised at how different the two phones are. I would like to put a custom rom on the cappy. What rom would you suggest? Kernel?
Sent from my SGH-T959 using xda premium
Suggesting ROMs ins't allow because you will most likely get arguing. Flash Corn Kernel and try out some custom stock ROMs if you don't know what you're doing. If you have an idea. I suggest ANY of the ICS ROMs
I would like a stable ICS rom. PM me with any suggestions.
Sent from my SGH-T959 using xda premium
Going through files in root browser I found a clockwork mod file. Also a zip vcremoveboot-CWM.zip. Not sure what it is? Ideas....
Sent from my SGH-T959 using xda premium
samsgun357 said:
Going through files in root browser I found a clockwork mod file. Also a zip vcremoveboot-CWM.zip. Not sure what it is? Ideas....
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
vcremoveboot is the revert zip for voltage control, in case you have unstable settings applied at boot.
OMG i did a mistake..
Please tell me is this able to fix or not???
Sure. Mentioned many times, this is another download mode.
Just fully charge your tablet, like 8hrs.
Connect and launch Odin.
Once Odin detect it, quickly flash away with stock Rom.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Sure. Mentioned many times, this is another download mode.
Just fully charge your tablet, like 8hrs.
Connect and launch Odin.
Once Odin detect it, quickly flash away with stock Rom.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Happy to know that...
Wish me luck mate
can u provide me a link to CWM installer?
I make a mistake by flash via odin CWM for tab 10.1 p7510 wifi tablet into p1000
then odin stuck and i removed the cable
Good luck.
Btw is this a P1000 you have? If so, I would recommend restock using overcome gb stock safe v5.
Link is in my signature. Get the pdf guide and start at page 7.
Once the restock is done, you can flash overcome kernel using Odin, also in the guide.
After that you will have cwm recovery.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Good luck.
Btw is this a P1000 you have? If so, I would recommend restock using overcome gb stock safe v5.
Link is in my signature. Get the pdf guide and start at page 7.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
i'd downloaded from here
and wanna flash it via odin..
another request link for the cwm (flashable via odin)
Read my edited reply above regarding cwm
Sent from my GT-I9300 using xda app-developers app
thanx mate... just reply whatever...wanna give thank meter for you
Please search on xda before asking questions.
gogol1996 said:
Please search on xda before asking questions.
Click to expand...
Click to collapse
searched before and find a bit complicated p1000<->p1010
sometimes when u come to a new place, u need someone to guide u
Hi everyone. Just bought new galaxy note basebrand N7000XXLRB, build number IMM76D.XXLRI, 11.july, v4.0.4and i want to root to start using custom ROM. Any clear guide? I found no thread related to my device.
Sent from my GT-N7000 using xda app-developers app
hoursenghong said:
Hi everyone. Just bought new galaxy note basebrand N7000XXLRB, build number IMM76D.XXLRI, 11.july, v4.0.4and i want to root to start using custom ROM. Any clear guide? I found no thread related to my device.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1329360
^^ Is a good place to start, I would say the easiest way would be to download philz kernel for your version (LRB) and flash it through the stock recovery, this will give you root and CWM and from there on the limits are endless.
or you can use philz ODIN version or even HydraCore ODIN version and flash them using ODIN (obviously ) but this will give you yellow triangle (easily removed with triangle away app)
Flash philz kernel, then use pc odin or mobile odin to flash your custom rom.
Anyway you can use the search functions to get more in deep information.
Sent from my GT-N7000 using xda app-developers app
feartheanonymity said:
http://forum.xda-developers.com/showthread.php?t=1329360
^^ Is a good place to start, I would say the easiest way would be to download philz kernel for your version (LRB) and flash it through the stock recovery, this will give you root and CWM and from there on the limits are endless.
or you can use philz ODIN version or even HydraCore ODIN version and flash them using ODIN (obviously ) but this will give you yellow triangle (easily removed with triangle away app)
Click to expand...
Click to collapse
too heavy for me, please give me an easy method(u recommend) include download link, and one more thing is i dont have credit card for mobile ODIN.
hoursenghong said:
Hi everyone. Just bought new galaxy note basebrand N7000XXLRB, build number IMM76D.XXLRI, 11.july, v4.0.4and i want to root to start using custom ROM. Any clear guide? I found no thread related to my device.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
-Download This
http://www.mediafire.com/?kesmwbjbnux4i1p
and copy to ext SD card
-reboot to recovery
-select install/update zip from ext SD
-choose zip (file you have copied)
-Flash
done
This s short procedure but though i recommend to read above said thread to get detail information.
Hey bro. I dont have ext sd card. Can i use it with my usb storage?
Sent from my GT-N7000 using xda app-developers app
no.. stock recovery only flashes from external storage.. use the exynos exploit app by chainfire to root .. then use mobile odin to install Philz or speedmod or hydracore.. then you are set to flash custom roms
its the 0.Root with apk procedure in the thread mentioned by Dr ketan
This is much harder than my old infuse 4g. M so confuse... Now u mean i need to root using exynos blabla then install file(mediafire link above) using odin? I dont have credit card for mobile odin, but i have pc odin.
Sent from my GT-N7000 using xda app-developers app
not the above link but you need to use tar.md5 file version of kernel.. as mobile odin wont recognize that,,
here link to MO by its Dev
http://forum.xda-developers.com/showthread.php?t=1347899
You can use pc odin but that will increase the counter and cause yellow triangle at boot
Rooted using exynos already. Installing MO and mobileODIN flashkernel N7000 already. Then what?
Sent from my GT-N7000 using xda app-developers app
?
What kernel did you flash using mo?
OP said if i install MO lite i need to install flashkernel N7000 v3.0.apk i didnt flash anything yet
Sent from my GT-N7000 using xda app-developers app
First install the mo kernel and then open mo again. Then flash the custom kernel of your choice.
Can u give me kernel link for my device?
Sent from my GT-N7000 using xda app-developers app
Got philz now... 2question:
1. If i want to install custom rom, what m gonna do? Do i need right one like " for XXLRI blabla"?
2. Where can i get stock 4.0.4 without root?
Sent from my GT-N7000 using xda app-developers app
hoursenghong said:
Got philz now... 2question:
1. If i want to install custom rom, what m gonna do? Do i need right one like " for XXLRI blabla"?
2. Where can i get stock 4.0.4 without root?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
if u already have a rooted and philz installed...just download the custom RoM of ur choice in the Development sector and use the recovery to flash it.
and if u want stock 4.0.4 ..use this thread http://forum.xda-developers.com/showthread.php?t=1424997