Related
Hi there, I installed "RUU_Rhodium_HTC_ARA_1.19.415.1_Radio_Rhodium_3.44.25.27_Signed_Ship" on my phone, and now it is stuck on the reboot screen, and it keeps rebooting constantly. it won't boot anymore.
I tried to install a different Rom, and it still won't boot.
I tried the hot fix rhodium radio 3.46.
I tyried SPL loader. no luck
Any help is greately appreciated.
Do you have Hard SPL?
Have you tried re-flashing the stock ROM for your device, not just "another" ROM?
Dave
yes I have, I tried both.
How I got it to work, is by using rollback SPL.
But now I can not load the Arabic ROM anymore
Because I used my 1 trial.
Is there any way for me to install the Arabic ROM?
ericsson12 said:
yes I have, I tried both.
How I got it to work, is by using rollback SPL.
But now I can not load the Arabic ROM anymore
Because I used my 1 trial.
Is there any way for me to install the Arabic ROM?
Click to expand...
Click to collapse
Can you boot Windows Mobile? If not, can you re-flash your carrier's ROM (hopefully they have a Ship Exe) whilst in the bootloader (see the Rhodium wiki pages)?
Ta
Dave
Have you tried Mtty?
Mine got stuck at bootloader a couple of days ago, because my computer hang in the flashing.
Second time Mtty saves me
I am able to boot into windows now, but i am unable to load the Arabic ROm.
Help please
I've had something similar.
But my phone kept reinstalling itself every time it booted.
Now I know this was a diamond, but I think it might help.
Maybe someone else could look at this as well and give his opinion about it.
The thread about this case is here http://forum.xda-developers.com/showthread.php?t=493131
Hope that helps
i had this problem.. the only way that seemed to work with me is flash stock spl then flash rom.. once the rom is flashed succ run the arabic localization.. finish it n the re-flash hspl.. thats is the only way around it.. i think there's a conflict between the ara setup n hspl.. dont know if it'll work with u, but did with me since my device accepted the rom in stock spl.. hope it works for u ;-)
DarkForcesTeam SSPL for HTC Photon (Mini)
SSPL allows you to flash custom [not-signed] OS or/and ignore CID check.
How safe is it?
We disabled SPL and Radio flashing, so it can only flash Splashes and OS images.
(To all hackers out there... don’t enable it! else you will BRICK your device)
Worst case is that you destroy your OS partition, in that case you must flash a ship ROM using the original SPL (Vol down on boot run ruu from PC )
We did our best to make it save, else we would not release it for public testing, but anyway, all on your own risk!
How to use it:
Download the SSPL_RUU.exe and put it into an empty folder
Add the RUU_signed.nbh that you want to flash to your device into the same folder
Connect the device to the PC, device must be running WM, not show the 3 color screen
Run SSPL_RUU.exe
Troubleshooting:
If you don’t see USB at the bottom of the device screen and the ruu showed a connection error, disconnect the device and connect it again... USB should be there now.
Then just run the SSPL_RUU.exe again, flashing will start now
If the flashing breaks before 100%, stay cool! ... Reset the device and go to Boot loader, then flash a ship rom to the device (Must be the right rom, with the right CID)
Don’t forget to report that it happened... after you flashed the original ROM back, you can try again.
It is possible, that sometimes the screen stays black for 15sec or more before the SSPL 3 color screen shows, if it takes too long, do reset and try again and please report that!!!!
"Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center", !!! Problem NOT related to this SSPL !!! ... this means that you flashed a region protected rom... flash back to a ship ROM for your device and stick to ROMs with your region ID... or patch them
(You might have to remove the battery after flashing back, else it might not boot up)
Disclaimer:
This product is free to use, but at your own risk. We take no
responsibility for any conflict, fault, or damage caused by
this unlocking procedure. No warranties of any kind are given.
We have tested our product on several devices and have not
found any problems with it.
What about HSPL? HSPL will be soon
DFT team 2010.
well done bro
Tom
Excellent news! Thank you for the work and dedication.
Best Regards,
Xavier Soares
Thanks a lot for the work you've done, now I have my Mini with the last 1.32 ROM in English
Cheers
No problems during flashing btw, everything went fast and smooth. I did it under Windows 7 Ultimate x64 while I was browsing the internet and listening to some music
Thank you for the work.
Best Regards, 100-40
Thanks alot for the good work im flashing it now & its on 15% & everything is going well thanks alot guys for the god work you've done
nice job
wow! thanks a lot, will do so tomorrow!
Thank you very much for your sharing!
I hope HSPL coming soon!
SSPL
Very good job !!!!
Cotulla said:
DarkForcesTeam SSPL for HTC Photon (Mini)
SSPL allows you to flash custom [not-signed] OS or/and ignore CID check.....etc...etc
What about HSPL? HSPL will be soon
DFT team 2010.
Click to expand...
Click to collapse
This is a great news!!!
...not bad the SSPL
NitroNitrous said:
Thanks a lot for the work you've done, now I have my Mini with the last 1.32 ROM in English
Cheers
No problems during flashing btw, everything went fast and smooth. I did it under Windows 7 Ultimate x64 while I was browsing the internet and listening to some music
Click to expand...
Click to collapse
Have you generated the gold card with? Do I need it right?
rigo007 said:
Have you generated the gold card with? Do I need it right?
Click to expand...
Click to collapse
No, you don't need a gold car with this method. Just follow the instructions and everything will be fine
If this sspl allow us to flash custom roms, then what will the hspl allow us to do?
one hint: i think you need admin rights. i normally work without and ran into connection troubles. but this is no issue on sspl since i ran into connection troubles with the official ringtone update as well.
running the sspl with admin-rights worked very well for me. Thanks a lot!
N3XuS.eXe said:
If this sspl allow us to flash custom roms, then what will the hspl allow us to do?
Click to expand...
Click to collapse
To flash custom radios
Thank you very much!
I flashed my italian (1.07.408.1) HTC Hd mini with the European version (1.32.401.2).
Following the instructions I wasn't able but I've tried several time (even with the 3 color screen and without the SSPL was able to get the current ROM) and i had success. Cheers.
Open file Error
the zip file only contains a file: "DFT_SSPL_MINI.exe", and I have error of "Can not open the requested file ..."
need I also download something else to run with this exe?
thanks
hi all,
works perfectly, thanks
greatz,
Rudie
zengyee said:
the zip file only contains a file: "DFT_SSPL_MINI.exe", and I have error of "Can not open the requested file ..."
need I also download something else to run with this exe?
Click to expand...
Click to collapse
you need download the rom file (*.nbh), and put it into the same dir as "dft_sspl_mini.exe".
i saw this thread http://forum.xda-developers.com/showthread.php?t=625200 and they figured out how to get it working. im new to the x1 and isntead of searching everything it would be easier just to ask
1. are there devs still working on the x1 and android?
2. is it possible to run android as a primary..is there a chance?
thanks. mods can delete after
forget it! it will never be any android rom ... All devs bought X10
ilgreco112 said:
forget it! it will never be any android rom ... All devs bought X10
Click to expand...
Click to collapse
that sucks..from reading a few threads it looked like it was going somewhere
Come on people, let's have hope. I think that there will be an android rom soon.
deflex_ said:
Come on people, let's have hope. I think that there will be an android rom soon.
Click to expand...
Click to collapse
I agree, also, how does it matter if its a ROM...what matters is that the phone heating/battery eating issue and Wifi...
In my case, i want the GPRS to be used for the weather..but that too isnt happening...i can use GPRS in the internet browser, but NOT in the weather update and Marketplace and app store....is there a way i can get this to work..
My understanding is that we cannot currently boot from NAND as there is no code to start the LCD panel, thus the need to start with HaRET.
A quick look in the the Blackstone forum suggests they won't do it until all functions (gps camera etc) are fully working.
in current state there is no point to run droid as primary system. battery runs out in few hours and functionality lefts much to be desired. do not let excitement to get you, first impression maybe good but whole thing is not so usable just jet. play whit it some days and you see it yourself.
well,camera and gps in android cannot work under most htc devices.so,if just for fun,these are not big problems.as for the heat,if in nand,it may not as hot as it is when all needed have to be found in sdcard,and probably faster.i think what is most important is that the chefs have had x10 and dont pay much attention to xperiod.
It seems that there is a WMKernel that is only 5MB large,If it works,Android may work in ROM,I ever tried to place and run it in rom,and finally failed because there will be a img file that contains files of Android will be storaged,a file about 256 MB ,For Orginall rom,The ROM space if not enough
howerver,I'll have hope about it
nerfg002 said:
It seems that there is a WMKernel that is only 5MB large,If it works,Android may work in ROM,I ever tried to place and run it in rom,and finally failed because there will be a img file that contains files of Android will be storaged,a file about 256 MB ,For Orginall rom,The ROM space if not enough
howerver,I'll have hope about it
Click to expand...
Click to collapse
so basically itll load the windows kernel (to recognize all the hardware) and then straight away get into the android kernel THROUGH wm kernel without installing the full wm OS?
that seems almost perfect because we wouldnt have to rely on the SD card as much..as long as we can have a stable android build that doesnt destroy the battery
I think putting android on flash is real ROM and nothing else.
I can't see point in having ROM that will just run haret from SD card. Then i rather just have WinMobile and launch haret manually.
Please not that this is my first guide on here and I'll make it as easy to understand as much as possible.
This has been tested on a Vodaphone branded HD Mini. Please reply to this post if this has worked on a different branded phone.
This is to help people to Unbrand their HD Mini's.
Have you managed to flash it to the latest ROM? If not you need to do the following:
•Download the SSPL_RUU.exe and put it into an empty folder (http://forum.xda-developers.com/showthread.php?t=694409)
•Add the RUU_signed.nbh that you want to flash to your device into the same folder (http://shipped-roms.com/shipped/Pho...adio_Signed_32.2803.05.06_0.63.05.36_Ship.exe) Assuming you want Western Europe ROM. You can use a different ROM if you want
•Connect your HD Mini to your PC. Making sure you use ActiveSync
•Run SSPL_RUU.exe and following the onscreen propmts.
Once done your phone will reboot. Next is to flash a Radio ROM.
•Move your ROM from the folder which contains the SSPL_RUU.exe
•Using the ROM that you just used Extract it to a location of your choice by using winRAR. Look for
Radio_32.2806.05.06_0.63.05.40 and rename it to PHOTIMG.nbh
•Place PHOTIMG.nbh into the same folder as SSPL_RUU.exe and flash once again
•Once done you will have a unbranded HD Mini as if you bought it like that. This worked on my Vodaphone
branded HD Mini and worked a charm.
I'd like to thank DarkForcesTeam for the SSPL_RUU.exe and the rest of the developers that have made
this possible. Without them we would be stuck with these branded phones.
Could the Admins place this as a sticky please. Many Thanks
The phone hard-resets after radio flash ? I want to flash only the radio.
Thanks for your guide, wardy. Great explanation.
But it doesn't work with my HD mini.
It stays at 0% for quite a long time. Afterwards, there's an error saying something about a wrong ID.
I'm afraid I'll have to wait for a HD mini hardspl
ci6i said:
The phone hard-resets after radio flash ? I want to flash only the radio.
Click to expand...
Click to collapse
As long as you are using the SSPL_RUU.exe to flash only the radio & renaming then you can flash it. Yes after the flash the phone does hard-reset.
Which part does it stay on? Please list the error exactly as it appears so that I can help you further.
If its ''Error 294, Invalid Vendor ID'' then download PHO03693.exe over to your device and install it then try to flash the radio again.
wardy_uk1 said:
Which part does it stay on? Please list the error exactly as it appears so that I can help you further.
If its ''Error 294, Invalid Vendor ID'' then download PHO03693.exe over to your device and install it then try to flash the radio again.
Click to expand...
Click to collapse
Thanks, I installed PHO03693.exe now. What happened afterwards:
-The error I get when I try to install any ROM via “DFT_SSPL_MINI” is “[202] Connection error”.
-If I enter boot mode via my endkey app and install via “DFT_SSPL_MINI” after that, it ends with “Error [262]: Update error”. When I click “view document”, it says: “dummy file”.
-If I try to install official HTC ROM “RUU_Photon_HTC_Europe_1.36.401.1_Radio_Signed_32.2803.05.06_0.63.05.36_Ship”, I get “Error [294] invalid vender ID”
Not sure about that error code. Have you tried doing a hard-reset first then trying to flash the ROM. If your using Windows Vista or Windows 7 then try running SSPL_RUU.exe as Administrator. Hope this helps
wardy_uk1 said:
Not sure about that error code. Have you tried doing a hard-reset first then trying to flash the ROM. If your using Windows Vista or Windows 7 then try running SSPL_RUU.exe as Administrator. Hope this helps
Click to expand...
Click to collapse
I tried both Windows 7 and XP as administrator.
When I'm doing hard-reset, I have to install PHO03693.exe afterwards again. So I did.
It has confused me now mate :$ You'll be better waiting for the HSPL instead. Hopefully it won't be too long now for it.
I have a cracked hd mini with vodafone branding..........i wanted to install the latest official rom......but i'm unable to do so........also i'm new to all this stuff can anybody please help me with this.........thanks
Hi, I just extracted the ROM "RUU_Photon_hTC_Asia_WWE_1.36.707.3_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe" with WINRAR, but I don't seem to find the Radio file inside, I only see the "RUU_signed.nbh" file which I intend to update, am I looking at the right place?
Thanks
rfung said:
Hi, I just extracted the ROM "RUU_Photon_hTC_Asia_WWE_1.36.707.3_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe" with WINRAR, but I don't seem to find the Radio file inside, I only see the "RUU_signed.nbh" file which I intend to update, am I looking at the right place?
Thanks
Click to expand...
Click to collapse
Likewise I see no Radio file....
[edit]
Found the file now, download the latest HTC update http://www.htc.com/uk/SupportDownload.aspx?p_id=314&cat=0&dl_id=1024 & you can extract the file from there.
Can anyone confirm if flashing the Radio rom is safe? - the DarkForcesTeam original link warns against it! > http://forum.xda-developers.com/showthread.php?t=694409
Im using an O2 UK HD MINI but have upgraded the ROM to the latest just the radio has remained at 0.63.05.18
I flashed with east europen ROM and now (and before flashing) I don't have GSM signal on phone, strange is that signal show up sometimes 1/5 and disapear again after few seconds but nothing else.
I have one phone with original Spanish language and have same problem with signal. dunno why that happen.
can anyone send me the steps in german? i dont really understand it xD
sorry but my english ist not perfect
Managed to carry out the Radio ROM update with an O2 branded phone.
However the Radio rom listed is still the old one (0.63.05.18)
The update process appeared to take but the radio ROM has remained the same. So take from that what you will?!
help
Please help me guys! I think i've done exactly like u said but when i want to flash the RADIO (PHOTIMG.nbh) after i've flashed the RUU i get this message: the update utility cannot be used for your PDA Phone. Please get newer Update Utility
I downloaded the Radio from HTC site, it was 2 files dont know why? 1 small for like 700kb and the other 12mb....
Hi i ran task 29 w/ 4.49.25.95 (AT&T) because of the invalid model id. then i flashed kalhimeo SuperLite 2.0 w/ msd. and when it boots up i see the htc splash then a orange boot screen and then once the rom loads its not rom i flashed or its partially loaded. when i tried the custom rom update utility the current version is 2. something and i tried flashing it it finishes and the phone boots and still gives me the same result so i tried it with another rom and the version was the same so i flashed it look like it worked untill i notice cabs dont work and the comm manger to turn off 3g wasnt there. any ideas? thanks i spent 2 hours tryna look up this problem
You didnt mention is you had hard spl'd the device, unsure if task 29 would enable you to be able to psuedo flash a rom like that....
WC
the phone has been hard spl-ed and i dont really understand what you just said there
its fixed i think it had somthing to do with radios not matching