Related
Slowly, started to appear new Gengerbread ROMs. Someone who installed it, can cofirm, that temp root working? I asked, because i want to know it is possible to downgrade from Gingerbread to Froyo (psneuter and misc_ver method).
Good question, anyone installed them yet? It would be good to know if psneuter still works...
psneuter not work
So far this is what I have found:
You can downgrade but, my IS would not boot pass the HTC splash screen.
timbo007up said:
Hmm that's weird... It flashes but don't start... Have u tried a factory reset? before and/or after the update? But to be honest this is getting off topic, so please pm me about this, will update the guide as soon this is figured out.
Click to expand...
Click to collapse
I tried a factory reset before and after downgrading but, it still just loops back to the splash screen.
I was able to update back to a Gb rom.
I am going to try using the ruu instead of the rom.zip.
Update: The ruu did not work.
well my only guess can be is that there is a new bootloader, can you post the version number which is on there. (reboot in bootloader and give hboot version)
perhaps they changed some things, and that downgrading the hboot is making the conflict.
but for absolute clearance: You have a s-on device, upgraded with the goldcard method, and now trying to downgrade again with a goldcard.
And did you get any error messages during the downgrade? like red words or something like that?
timbo007up said:
well my only guess can be is that there is a new bootloader, can you post the version number which is on there. (reboot in bootloader and give hboot version)
HBOOT-1.13.0000
perhaps they changed some things, and that downgrading the hboot is making the conflict.
but for absolute clearance: You have a s-on device, upgraded with the goldcard method, and now trying to downgrade again with a goldcard.
Yes
And did you get any error messages during the downgrade? like red words or something like that?
No error message
Click to expand...
Click to collapse
Pics added.
touchpro247 said:
Pics added.
Click to expand...
Click to collapse
Look at 2nd pic, radio version number is same as in GB-seems that it did not downgraded! (Froyo-38.03.01.08_M; GB 3805.04.03.12_M!!)
Can u try to flash other Froyo ROM? Maybe it will work !!
Another suggestion, try to reflash again Froyo ROM (after first u have HBOOT 1-09-00000, and maybe, 2nd time will be downgrad the radio to 38.03.01.08_M)
Flashing a second time should do the trick than if its possible , I'm quite busy with a lot of things, so not much time for xda.
Let us know if it worked!
timbo007up said:
Flashing a second time should do the trick than if its possible , I'm quite busy with a lot of things, so not much time for xda.
Let us know if it worked!
Click to expand...
Click to collapse
Unfortunately, flashing a second time did not work.
Try This Guide:
http://forum.xda-developers.com/showthread.php?t=1003457
Before you guys jump on me, I would like to apologize for just being dumb. Even though that is the truth, may I have some help?
I didn't read the guide on turning the S-Off on my Vivid, I thought all I had to do was run the hason s-off and it would automatically do everything for me. Yeah, I didn't even know about a wire trick (I've already admitted the obvious). My Vivid just boots to the JoupunutBear screen and reboots after about 3 minutes to the same screen. I guess I've bricked my device!:crying:
Is it possible for HTC to remotely restore my Vivid, or do I have to take it to an authorized dealer that repair phones? If so, how much am I looking at? I wished I had left my phone alone, but doing some of the crazy wild and exciting stuff for phones is so cool! I wish I had read that I needed to pin mod something, or else I would not have tried to do S-Off! I just got my phone a few days ago in a trade for my HTC Shift.
I guess this will be an expensive lesson and hopefully I'll read and not think every procedure for different phones are the same.
I miss my Vivid!:crying:
Use flashtool and flash stock rom .....
Sent from my E15 using Tapatalk 2
bandarigoda123 said:
Use flashtool and flash stock rom .....
Sent from my E15 using Tapatalk 2
Click to expand...
Click to collapse
I thought as long as I had reovery image on my device, I had nothing to worry about. Boy was I wrong!
Any tips on which recovery I should use? Preferably with guide, my nerves are a bit tweaked right now.
OK, I just relocked...now what?
Downloaded AT&T stock ROM, downloaded AT&T PH39img. I guess now I'm suppose to place both files on SD card and use HBOOT?
Follow the guide in my signature titled "back to stock" (I think its step 6). Then if you want to re root or whatever follow the guide in my signature steps 1-4.
Sent from my HTC PH39100 using xda premium
Double post
slapshot30 said:
Follow the guide in my signature titled "back to stock" (I think its step 6). Then if you want to re root or whatever follow the guide in my signature steps 1-4.
Sent from my HTC PH39100 using xda premium
Click to expand...
Click to collapse
Following your guide now, I'll let you know how it goes.
I have to download the RUU and not use the AT&Tzip I've already have downloaded. Seems straight forward, I'll reply back, thanks!
Since I have some time before the RUU finishes downloading, I tried to reflash factory rom using the second method. When I reboot into recovery, it does load the PG file, but it doesn't give me an option to flash anything?
Just a heads up...for me ruu never worked with a unlocked bootloader so if it doesn't work relock your bootloader with the super tool thing in he dev section...just boot into fastboot from hboot and click relock bootloader, then boot back to fastboot and run the ruu
Sent from my HTC PH39100 using xda app-developers app
mg2195 said:
Just a heads up...for me ruu never worked with a unlocked bootloader so if it doesn't work relock your bootloader with the super tool thing in he dev section...just boot into fastboot from hboot and click relock bootloader, then boot back to fastboot and run the ruu
Sent from my HTC PH39100 using xda app-developers app
Click to expand...
Click to collapse
thats the easiest way to do it
kobe_24 said:
Since I have some time before the RUU finishes downloading, I tried to reflash factory rom using the second method. When I reboot into recovery, it does load the PG file, but it doesn't give me an option to flash anything?
Click to expand...
Click to collapse
The beginning of step 6 requires you to relock the bootloader. Otherwise, the RUU or PH zip will not work.
Sent from my HTC PH39100 using xda premium
Man this download is taking long, I still have 15 percent to go (6 minutes)!
I guess I have to have the RUU for any of this to work, so I'll stop playing around with it before I render the device useless. So I'll be patient since I have 5 minutes to go, then I should be able to perform any of the two methods found in the guide. I'm so glad there are so many here to help me, I love you guys! Don't be too flattered, I love my Vivid more! Once this is done, I'll thank each and every one of you!
OK all, I have to leave for right now. I started the RRU utility, but it stops at checking signatures.
ERROR (155) Unknown error
The ROM Update Utility cannot update your Android phone. Please get the correct ROM Update Utility and try again.
I have an AT&T Vivid, I thought the one for Holiday Cingular was the correct one? On the phone it says RUU update failed. So I'll look into it when I get back and try then. For some reason I can't update the HBOOT?
Bye for now!
I bet you can't update the bootloader while it is locked, LOL!
As said...I'll look into it when I get back.
kobe_24 said:
OK all, I have to leave for right now. I started the RRU utility, but it stops at checking signatures.
ERROR (155) Unknown error
The ROM Update Utility cannot update your Android phone. Please get the correct ROM Update Utility and try again.
I have an AT&T Vivid, I thought the one for Holiday Cingular was the correct one? On the phone it says RUU update failed. So I'll look into it when I get back and try then. For some reason I can't update the HBOOT?
Bye for now!
I bet you can't update the bootloader while it is locked, LOL!
As said...I'll look into it when I get back.
Click to expand...
Click to collapse
It should work if you re-locked your bootloader... So that isn't the problem. Maybe somewhere during you trying to S-OFF you still managed to change the HBOOT to the unofficial one. If so, then the RUU or PH zip will both probably not work. Somehow you need to get back to the stock HBOOT. You might need to ask in the Juoponut bear thread or contact them directly.
slapshot30 said:
It should work if you re-locked your bootloader... So that isn't the problem. Maybe somewhere during you trying to S-OFF you still managed to change the HBOOT to the unofficial one. If so, then the RUU or PH zip will both probably not work. Somehow you need to get back to the stock HBOOT. You might need to ask in the Juoponut bear thread or contact them directly.
Click to expand...
Click to collapse
It says I have HBOOT-1.85.0025. I'm back now, so I'll just keep trying.
Congratulations!
Your ROM update has been completed. Your Android phone is now ready for use.
Yup guys, just had to get the right RRU which is the htc_vivid_att_RUU_3.26.502.56_US.exe
Phone is back up and running and everyone is thanked!
Big thank you for all who stood by me during my time of sorrow.
I recently rooted my HTC one and a week later my top speaker crackles. I need to send it to Telstra but I need to remove the root. I've looked all over the place and I can't seem to find a ruu or even a nandroid. If some one could point me in the direction it will be greatly appreciated. Also will a nandroid work to unroot? Or do I need a ruu?
madman369 said:
I recently rooted my HTC one and a week later my top speaker crackles. I need to send it to Telstra but I need to remove the root. I've looked all over the place and I can't seem to find a ruu or even a nandroid. If some one could point me in the direction it will be greatly appreciated. Also will a nandroid work to unroot? Or do I need a ruu?
Click to expand...
Click to collapse
You can find the stock ruu at this topic http://forum.xda-developers.com/showthread.php?t=2224752
A nandroid of the original ROM will suffice, especially if you booted the bootloader and took the backup rather than flashing it.
If not, most bootloaders of the same primary version are equivalent.
What was your original software version?
fastboot getvar version-main
Or is that main-version?
Sorry I'm still kinda new to all of this. I used a recovery to root the phone ( team win) but I made the stupid mistake of not making a nandroid before hand. I need to make it look like I never rooted this phone so HTC can replace it. If I can't find something I might just "drop" it in water since I have insurance.
madman369 said:
Sorry I'm still kinda new to all of this. I used a recovery to root the phone ( team win) but I made the stupid mistake of not making a nandroid before hand. I need to make it look like I never rooted this phone so HTC can replace it. If I can't find something I might just "drop" it in water since I have insurance.
Click to expand...
Click to collapse
Did you check the thread that i sent?
dadrocker said:
Did you check the thread that i sent?
Click to expand...
Click to collapse
I did but I need a Telstra stock ruu. So I can unroot it.
The boot loader will say re-locked even if you flash your RUU, isn't that correct?
mfpreach said:
The boot loader will say re-locked even if you flash your RUU, isn't that correct?
Click to expand...
Click to collapse
Yes it will
ArmedandDangerous said:
Yes it will
Click to expand...
Click to collapse
So in other words HTC won't fix it?
madman369 said:
So in other words HTC won't fix it?
Click to expand...
Click to collapse
It depends if you're lucky or unlucky. I've heard of some that get their warranties applied, but also some where they got rejected. No harm trying, you'll get your phone back anyway
Hi fellas! I'm kinda scared and confused right now.
I just bought a 2nd hand HTC One M7
and I noticed that it is rooted something like ViperOne, wanted to change it back to stock.
So I did some things with fastboot and now I'm stuck and I don't know where to start.
Can anyone help me with this one? This is my first time with root things so kinda be patient with me
Should I post the information about fastboot getvar all?
Yeah, maybe with more info we can help you.
Remember to remove your imei and serialnum
Check also this thread @nkk71
Here is the thing showing when I turn on my phone
tobbzz said:
Hi fellas! I'm kinda scared and confused right now.
I just bought a 2nd hand HTC One M7
and I noticed that it is rooted something like ViperOne, wanted to change it back to stock.
So I did some things with fastboot and now I'm stuck and I don't know where to start.
Can anyone help me with this one? This is my first time with root things so kinda be patient with me
Should I post the information about fastboot getvar all?
Click to expand...
Click to collapse
What options do you have in the bootloader screen and what exactly have you done/tried?
Which guides did you follow on the attempt to go back to stock?
Do you know which custom recovery it has?
I have the options of
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
SHOW BARCODE
I tried doing the fastboot flash zip firmware.zip
I don't know what I was doing I was desperate
Kinda busy at work specially I work at night can't bring it to an expert or some sort.
tobbzz said:
Here is the thing showing when I turn on my phone
Click to expand...
Click to collapse
you have to do:
- Re-Unlock the device
- Flash a custom recovery
- Flash the guru zip for back to stock
- Relock the bootloader
Do someone has the patience to guide me in a step by step procedure and help me find the necessary tools. Should we do this with reply to this post?
I've downloaded alot of zip files almost went over my internet limit around 1gb per zip.
Thank you so much guys. Good thing there is XDA, active members :laugh:
tobbzz said:
Do someone has the patience to guide me in a step by step procedure and help me find the necessary tools. Should we do this with reply to this post?
I've downloaded alot of zip files almost went over my internet limit around 1gb per zip.
Thank you so much guys. Good thing there is XDA, active members :laugh:
Click to expand...
Click to collapse
You have to check this thread.
Is the best solution for back to stock.
If you want maintain the root is easier then
tobbzz said:
Do someone has the patience to guide me in a step by step procedure and help me find the necessary tools. Should we do this with reply to this post?
I've downloaded alot of zip files almost went over my internet limit around 1gb per zip.
Thank you so much guys. Good thing there is XDA, active members :laugh:
Click to expand...
Click to collapse
Start with this for unlocking: http://www.youtube.com/watch?v=QU7vi388dMk
Then I would go for this: http://teamw.in/project/twrp2/164
Edit; What Guich said =)
So right now I'm currently downloading rumrunner since in the guide I should go down to HBOOT 1.44 since I have 1.54 is that correct?
And how about the versions of cid modelid radio I don't have any idea about that
tobbzz said:
So right now I'm currently downloading rumrunner since in the guide I should go down to HBOOT 1.44 since I have 1.54 is that correct?
And how about the versions of cid modelid radio I don't have any idea about that
Click to expand...
Click to collapse
All this info are on the pic you've posted before, and in a fastboot getvar all output
Gotcha! Right now I'm following the video of QBking unlocking my bootloader just give me couple of minutes see if this will work.
On nkk71's guide it says i need to remove the tampered and relocked
But on QBking's video i need to unlock it?
Is it the same or it is for a different thing?
Huge amount of frustration with trying to deal with my phone
I soft bricked my HTC One M8 HK not too long ago, and had left it sitting in the dust for a while as I had no options of fixing it because I wiped the memory on accident (how I did, I don't know. Guess I'm dumb. That's not the point though). It's been sitting on my dresser for about 2 months being unused as I had no microSD cards in hand. All it had was an unlocked bootloader and working TWRP.
As of right now, I've tried to install 4 ROMs. All 4 did not work. I followed the instructions and unlocked my bootloader and did all other essential things. I installed ViperOneM8 before being ignorant that my WiFi wouldn't work. It was the only ROM I installed that actually booted properly. The only issue was that I had no WiFi. Had it worked, I wouldn't be making this thread. Then I got Android Revolution HD, installed it and it installed properly. I booted it into system, and it brought me to bootloader. This was the same issue I had while trying to install my first ROM, and still happens. Then I got CyanogenMod, and it didn't even install. TWRP told me it failed right off the bat. Same thing with whenever I tried to install a stock firmware recovery of the variant I have, HK Sprint.
Right now, I'm getting the 4.2.5 HK RUU in hopes that it works. I tried it previously, and it was a literal waste of time. I've been here for 5 hours trying different ROMs and to no success. I was very faithful I would get to use my phone again, although unless this RUU actually works, I don't have a lot of positive faith for my phone.
Are there any fixes for getting something like CyanogenMod to work? I actually really wanted this ROM after I remembered it, and was quite let down after it failed to work. Also, is there anything I should do with the phone before I go farther with anything?
Thanks for any help you all can give, I would greatly appreciate it. Sucks not having a phone, so I'll take any help I can get. Thanks once again!
EDIT: The RUU did not work. It failed to update. Waiting for answers I guess..
F0rZ3r0 said:
I soft bricked my HTC One M8 HK not too long ago, and had left it sitting in the dust for a while as I had no options of fixing it because I wiped the memory on accident (how I did, I don't know. Guess I'm dumb. That's not the point though). It's been sitting on my dresser for about 2 months being unused as I had no microSD cards in hand. All it had was an unlocked bootloader and working TWRP.
As of right now, I've tried to install 4 ROMs. All 4 did not work. I followed the instructions and unlocked my bootloader and did all other essential things. I installed ViperOneM8 before being ignorant that my WiFi wouldn't work. It was the only ROM I installed that actually booted properly. The only issue was that I had no WiFi. Had it worked, I wouldn't be making this thread. Then I got Android Revolution HD, installed it and it installed properly. I booted it into system, and it brought me to bootloader. This was the same issue I had while trying to install my first ROM, and still happens. Then I got CyanogenMod, and it didn't even install. TWRP told me it failed right off the bat. Same thing with whenever I tried to install a stock firmware recovery of the variant I have, HK Sprint.
Right now, I'm getting the 4.2.5 HK RUU in hopes that it works. I tried it previously, and it was a literal waste of time. I've been here for 5 hours trying different ROMs and to no success. I was very faithful I would get to use my phone again, although unless this RUU actually works, I don't have a lot of positive faith for my phone.
Are there any fixes for getting something like CyanogenMod to work? I actually really wanted this ROM after I remembered it, and was quite let down after it failed to work. Also, is there anything I should do with the phone before I go farther with anything?
Thanks for any help you all can give, I would greatly appreciate it. Sucks not having a phone, so I'll take any help I can get. Thanks once again!
EDIT: The RUU did not work. It failed to update. Waiting for answers I guess..
Click to expand...
Click to collapse
Flashing RUU requires locked bootloader.
Alright, I'm seriously about to just throw this thing in the dumpster. I've been here another 2 hours trying to get Cyanogen to work, and I figured out the issue with it. The updater script file wasn't accepting m8_whl. I'm still unaware how in the Mod Edit I'm supposed to put m8_whl into the script for it to be accepted.
To be more specific, the actual updater script has m8whl, while my phone recognizes as m8_whl. It denies it.
I thought I put it into the script correctly, although it is not accepting it. I found a quote not saying the location, and I assumed in the latest release of Cyanogen 12 for M8s, it was in /META-INF/google/android/updater-script
Please, someone help me before I have an anger episode. This thing has literally wasted my whole Mod Edit day.
F0rZ3r0 said:
Alright, I'm seriously about to just throw this thing in the dumpster. I've been here another 2 hours trying to get Cyanogen to work, and I figured out the issue with it. The updater script file wasn't accepting m8_whl. I'm still unaware how in the Mod Edit I'm supposed to put m8_whl into the script for it to be accepted.
To be more specific, the actual updater script has m8whl, while my phone recognizes as m8_whl. It denies it.
I thought I put it into the script correctly, although it is not accepting it. I found a quote not saying the location, and I assumed in the latest release of Cyanogen 12 for M8s, it was in /META-INF/google/android/updater-script
Please, someone help me before I have an anger episode. This thing has literally wasted my whole Mod Edit day.
Click to expand...
Click to collapse
Don't toss it, it's still worth something, even if not to you. But as @popthosegaskets said, you need to relock the bootloader to flash the RUU. If it's been sitting for awhile, what version of firmware and hboot was it on prior to not working? Perhaps the issue is that it's older, also try flashing the newest version of TWRP if you still want to install a custom OS.
If you want to RUU, just use the fastboot command "fastboot oem lock" while in fastboot and then run the RUU. I think it reboots after locking.
dopy25 said:
Don't toss it, it's still worth something, even if not to you. But as @popthosegaskets said, you need to relock the bootloader to flash the RUU. If it's been sitting for awhile, what version of firmware and hboot was it on prior to not working? Perhaps the issue is that it's older, also try flashing the newest version of TWRP if you still want to install a custom OS.
If you want to RUU, just use the fastboot command "fastboot oem lock" while in fastboot and then run the RUU. I think it reboots after locking.
Click to expand...
Click to collapse
Alright, doing this now. I'm a lot calmer today, so I can do this.
dopy25 said:
Don't toss it, it's still worth something, even if not to you. But as @popthosegaskets said, you need to relock the bootloader to flash the RUU. If it's been sitting for awhile, what version of firmware and hboot was it on prior to not working? Perhaps the issue is that it's older, also try flashing the newest version of TWRP if you still want to install a custom OS.
If you want to RUU, just use the fastboot command "fastboot oem lock" while in fastboot and then run the RUU. I think it reboots after locking.
Click to expand...
Click to collapse
Didn't work, the RUU gave me the same error as last time, it tells me its the wrong RUU. Got both the stock RUUs just to see if I got it wrong about HK, both failed. Please help...
F0rZ3r0 said:
Didn't work, the RUU gave me the same error as last time, it tells me its the wrong RUU. Got both the stock RUUs just to see if I got it wrong about HK, both failed. Please help...
Click to expand...
Click to collapse
[Mod hat on] I know it can be frustrating at times but please take it easy with the swearing. [/Mod hat off]
You might try flashing the Full firmware that matches the RUU that you are trying to flash, the past couple updates require hboots to match on both your device and the RUU or you will get an error.
Sloth said:
[Mod hat on] I know it can be frustrating at times but please take it easy with the swearing. [/Mod hat off]
You might try flashing the Full firmware that matches the RUU that you are trying to flash, the past couple updates require hboots to match on both your device and the RUU or you will get an error.
Click to expand...
Click to collapse
My apologies for the swearing, was angry at the time.
Also, my hboot version seems to be 3.18. Not sure what to do in order to be able to flash firmware. My OS version seems to be 2.16.651.4 as well if that helps.
What would I have to do in order to install a ROM and how?
If you are not flashing the full firmware to begin with, that's the issue. From your OP it looks like you only have an unlocked BL and had TWRP.
You must relock the BL and then run the full RUU, you can get it in the thread here, or get it from HTC. Either way you need the full one, it flashes the FW and Software as well as bootloader and radios.
HTC: http://dl3.htc.com.s3.amazonaws.com..._NV_SPCS_1.52_003_release_446220_signed_2.exe
Thread with all and modified FW
http://forum.xda-developers.com/showthread.php?t=2729173
Are you S-Off or On? If you are running the *.651* then that's the non HK version. It's ok if you flashed a modified stock, but if you got that from an RUU, that would be what the issue is. I think
dopy25 said:
If you are not flashing the full firmware to begin with, that's the issue. From your OP it looks like you only have an unlocked BL and had TWRP.
You must relock the BL and then run the full RUU, you can get it in the thread here, or get it from HTC. Either way you need the full one, it flashes the FW and Software as well as bootloader and radios.
HTC: http://dl3.htc.com.s3.amazonaws.com..._NV_SPCS_1.52_003_release_446220_signed_2.exe
Thread with all and modified FW
http://forum.xda-developers.com/showthread.php?t=2729173
Are you S-Off or On? If you are running the *.651* then that's the non HK version. It's ok if you flashed a modified stock, but if you got that from an RUU, that would be what the issue is. I think
Click to expand...
Click to collapse
I believe I'm S-OFF.
F0rZ3r0 said:
I believe I'm S-OFF.
Click to expand...
Click to collapse
look in bootloader it will tell you if you are s-off or s-on.
Sloth said:
look in bootloader it will tell you if you are s-off or s-on.
Click to expand...
Click to collapse
Never mind, S-ON.
F0rZ3r0 said:
Never mind, S-ON.
Click to expand...
Click to collapse
Ok re-lock your bootloader if you have not already.
Flash this for Non HK 4.25.651.18 Full Firmware
Flash this for HK 4.25.654.18 Full Firmware
Instructions:
-rename firmware to firmware.zip
-copy firmware.zip to your sdk folder
-boot into bootloader
-plug in usb
-select fastboot option (screen should say fastboot usb)
-type fastboot oem rebootRUU
-when u see the black screen w/ HTC, type fastboot flash zip firmware.zip
-when it's done, type fastboot reboot
Once done flash the latest Non HK or HK RUU found here... http://forum.xda-developers.com/showthread.php?t=2729173
Then unlock your bootloader again using the unlock code you got from HTC.
Re-flash the latest TWRP found here... https://dl.twrp.me/m8/
This will give you a fresh start then you can try to flash the rom you want.
Sloth said:
Ok re-lock your bootloader if you have not already.
Flash this for Non HK 4.25.651.18 Full Firmware
Flash this for HK 4.25.654.18 Full Firmware
Instructions:
-rename firmware to firmware.zip
-copy firmware.zip to your sdk folder
-boot into bootloader
-plug in usb
-select fastboot option (screen should say fastboot usb)
-type fastboot oem rebootRUU
-when u see the black screen w/ HTC, type fastboot flash zip firmware.zip
-when it's done, type fastboot reboot
Once done flash the latest Non HK or HK RUU found here... http://forum.xda-developers.com/showthread.php?t=2729173
Then unlock your bootloader again using the unlock code you got from HTC.
Re-flash the latest TWRP found here... https://dl.twrp.me/m8/
This will give you a fresh start then you can try to flash the rom you want.
Click to expand...
Click to collapse
Umm...I don't have anything called SDK :/
What do I do then?
F0rZ3r0 said:
Umm...I don't have anything called SDK :/
What do I do then?
Click to expand...
Click to collapse
If you have a platform-tools you can use that or use the folder attached.
Unzip it and copy the files to a folder.
Sloth said:
If you have a platform-tools you can use that or use the folder attached.
Unzip it and copy the files to a folder.
Click to expand...
Click to collapse
Alright, I did it all, but it doesn't seem to be changing once I send over the zip. Is it meant to take a while or is there something wrong?
EDIT: 20 minutes later and still at the sending. Something probably went wrong.
EDIT 2: 30 minutes later, still sending.
F0rZ3r0 said:
Alright, I did it all, but it doesn't seem to be changing once I send over the zip. Is it meant to take a while or is there something wrong?
EDIT: 20 minutes later and still at the sending. Something probably went wrong.
EDIT 2: 30 minutes later, still sending.
Click to expand...
Click to collapse
Should only be a few seconds.
Sloth said:
Should only be a few seconds.
Click to expand...
Click to collapse
Not sure what the issue here is then. As I write this, it is still sending. I'm not sure what the issue is...
Check PM.