Related
This is the most appropriate location I could find to post this, as I have three HTC devices (8525, TyTN 2, and Advantage) so I thought I would start here.
Issue:
I can no longer connect to my Slingbox on my home network when using my MediaNet (wap.cingular) connection on the TyTN 2 or the Advantage.
Error Message: Cannot connect using these settings. But email and web work from the MediaNet settings, so I am fairly certain the configuration is correct.
Facts:
- The connection works over Wifi on either HTC device, so I know my Slingplayer Mobile settings (Finder ID, etc.) are correct.
- The connection works using a Verzion Motorola Q. My corporate VPN connection also does not work with AT&T, but does on the Q through Verzion.
Conclusion:
AT&T has (or did) make changes to the proxy used which prevents services running on certain ports from working correctly.
Question:
Is anyone else having problems connecting to their Slingbox? If you can connect, what settings are you using?
Additionally, could someone please explain the differences between the wap.cingular and isp.cingular settings? Do you have to use isp.cingular to get VPN and other advanced services to work? If so, what is the minimum data plan you must subscribe to with AT&T to be able to do so?
Thanks in advance,
Rob
I cant say why you are having issues. My Slingbox connection works fine (actually much better than fine) via my Kaiser on AT&T with MediaNet. It works better than it ever did with my 8525. I do notice that I do have 2 separate Connections, one for MEdiaNet and the other called "My ISP" which both point to the same wap.cingular APN. Not sure why I have 2, but everything works fine. The MediaNet one is "hidden" and I can't change it. The My ISP one is visible, but I don't want to delete it since everything seems to work fine. It just switches between them (albeit unnecessarily) to make things work when needed.
Furthermore, I am using wap.cingular exclusively. If you do connect to a VPN, you must use isp.cingular. The normal MediaMax, MediaNet and smartphone plans give you wap.cingular. The PDA plans give you isp.cingular. Blackberry plans may give you neither (they go to blackberry.net).
Thanks
Can I ask what port # you are using for your Slingbox? I am using 5001 for one of mine. Did you have to make a rule entry in your router or firewall? I am just trying to determine why suddenly I cannot connect. I am going to pop my SIM card back into my 8525 when I get home and check it again. The last time I tried it on the 8525 it worked. The trouble is, there aren't a lot of changes to make. it's pretty much wap.cingular and the password.
Thanks, and if you think of anything else, please let me know.
Rob
my slingbox works just fine on att. WHen i had the isp.cingular it did not. i had to change it to wap.cingular to get it to work.
Hmmm, don't know th eport off hand, but I want to say i'm justusing the default.
Did you upgrade to the new Slingbox firmware the past couple of days?
I did and could not connect. I called Slingmedia and they told me they had some issus with the new firmware and UpnP settngs in some routers.
I had to go into the Slingbox settings on the desktop PC and manually open the port in the router. If you call them they will take you step by sep
I had the same problem it took me 10 hrs to finally find the answer. It has nothing to do with your port your finder ID at all. like the a previous stated you need to use a different connection setting to use slingbox. Use or create the my isp connection. the only difference is one use proxy settings and one does not. to be honest i just deleted the media net profile and used my isp exclusively. the only problem is medianet keeps showing up in my connection settings. the medianet setting can also screw with push email retrieval
Thanks so much NJXBEAN! I could NOT get Slingplayer to connect until I made that change in the modem settings. It works great now!
-Jerry
Proxy was blocking me...
After experimenting with mine further, I was FINALLY able to connect by unchecking the "use proxy server" setting on my unlocked Kaiser. I wonder if the AT&T "Tilt" build of the OS will even allow this?
AT&T Tilt and Slingbox
Right out of the box, Slingplayer worked on my Tilt. I made no changes to the proxy settings.
I have the media net unlimited plan.
It could be a firewall issue. If the connection you have is listed as "Connects to the Internet" it'll block some ports. If you have Connects to Work, it'll open all ports.
I just just want to say that you guys are great! I had a problem with sling, researched on it here, and found the problem without asking..People, u gotta love it!!!!!!
rtsrob said:
This is the most appropriate location I could find to post this, as I have three HTC devices (8525, TyTN 2, and Advantage) so I thought I would start here.
Issue:
I can no longer connect to my Slingbox on my home network when using my MediaNet (wap.cingular) connection on the TyTN 2 or the Advantage.
Error Message: Cannot connect using these settings. But email and web work from the MediaNet settings, so I am fairly certain the configuration is correct.
Facts:
- The connection works over Wifi on either HTC device, so I know my Slingplayer Mobile settings (Finder ID, etc.) are correct.
- The connection works using a Verzion Motorola Q. My corporate VPN connection also does not work with AT&T, but does on the Q through Verzion.
Conclusion:
AT&T has (or did) make changes to the proxy used which prevents services running on certain ports from working correctly.
Question:
Is anyone else having problems connecting to their Slingbox? If you can connect, what settings are you using?
Additionally, could someone please explain the differences between the wap.cingular and isp.cingular settings? Do you have to use isp.cingular to get VPN and other advanced services to work? If so, what is the minimum data plan you must subscribe to with AT&T to be able to do so?
Thanks in advance,
Rob
Click to expand...
Click to collapse
have you found a fix, i have the x7500 and my slingbox worked fine at first then after a couple of months it just stopped and i could not receive email either, i found a workaround for the email but i have not found a work around for the slingbox.
P.S. i recored myself talking to an at&t rep you should listen to what he says
http://www.youtube.com/watch?v=h40AMIyc_yM
Found a Fix
It cannot connect to isp.cingular, you need to ADD wap.cingular apn to your network settings.
hnada said:
It cannot connect to isp.cingular, you need to ADD wap.cingular apn to your network settings.
Click to expand...
Click to collapse
If you just make your default connection Media Net it's already going to be set for wap.cingular
isp.cingular is the default only if you have it set to use ATT ISP as your connection.
Wow, I want slingbox now. I didn't even think of it working on my Tilt....is the data transfer extreme????????
I come from the Verizon world, where you could not authenticate through tethering unless you paid the extra $15/month. (But PDANet did work just fine). I have seen posts (albeit older dates) that claim people were charged heavy data rates for tethering when they did not have a data plan that included it.
I am using a Tilt and have the $59.00 Tether data plan. I am able to tether using either APN: wap.cingular or isp.cingular.
My friend has a Tilt with the $49.00 data plan without tethering (but with SMS). I tested his phone and could only get it to connect using wap.cingular for tethering.
So my questions are:
1) Do I actually need the tethering plan or can I reduce my plan and use wap.cingular? (I know it works but it leads me to the next question)
2) If you use wap.cingular without the tethering plan will you get charged the outrageous data rates?
3) What is the actual difference between the two APN's?
Thanks for any info you can provide!
SC
#1 and #2. For tethering legally, yes, you must have laptop connect. With Internet Sharing on the newer phones, it makes it harder for AT&T to prevent you from doing this (without being charged), but they most likely will eventually get you.
For #2, see this thread, specfically the crumbfire post. He explains it excellently:
http://forums.wireless.att.com/cng/...thread.id=47397&view=by_date_ascending&page=2
Hi:
I have searched and searched with no luck. I am on an ATT Tilt, and would like to use PdaNet to connect PC to internet through phone. I have yet to be able to get it to work properly. I get dial up error=721 (state=8193). I used PdaNet on my Treo 750 (which I had prior to the Tilt), and it worked perfectly, so I'm just not sure what I'm doing wrong.
Any ideas what the problem could be?
I am on an unlimited pda plan, but don't want to incur additional charges (such as the tethering plan), for very minimal, occasional tethering use, so ideally I would like to connect in a way that I won't be "caught", lol.
Any help would really be appreciated!
I'm use Internet Sharing via Bluetooth or USB to connect my laptop via my phone for Internet access. This is without a tethering plan from AT&T. The plan I have is $39.99/month, however they have a cheaper plan - MediaNet w/unlimited Data and 200 TXT MSG. Others have been using this plan without any issues. I ma venture to try this soon.
cincy1020,
For your problem with dial-up, you're not adding a modem via your pc. Try it with the USB cable first -- go to Internet sharing on the phone and select USB and click Connect. Connect your USB cable to your laptop and it should detect a network card and get an IP address. No need for dialup. You will have to install Active Sync on your laptop (I find it easier).
I think you're trying to use a modem which will probably require a tethering plan and that's probably why you're having the dialup error.
cincy1020
Well here's the deal for GPRS. You do not need PDANet. So give your license to someone who is still on CDMA somewhere. You first need to install the driver for the HTC Kaiser/Tilt as a USB Modem. A few forum searches will find the inf to install in windows. Then you simply set up a DUN connection using that USB modem. The number should be *99# and make sure to add this line as extra init options:
ATZ+CGDCONT=1,"IP","ISP.CINGULAR"
For Bluetooth, first you need to install the latest Toshiba Bluetooth Stack for Windows. Don't use the microsoft one. Then just set up a BT Dun connection with the same settings.
Hope that helps...
i've seen a lot of posts about this subject and i'm clueless, now i read the thread form the link provided above and it helps a little, but were do look on my phone to find out what i have? also for at&t users, what's the difference between media max 200, the 19.99 plan and the data connect 39.99 plan, i know the text messaging etc and both are unlimited data, and you "can't" use media max w/a tilt even i've heard you can, but in terms of using the internet and surfing the web what's the difference. Thanks
eras2r said:
cincy1020
Well here's the deal for GPRS. You do not need PDANet. So give your license to someone who is still on CDMA somewhere. You first need to install the driver for the HTC Kaiser/Tilt as a USB Modem. A few forum searches will find the inf to install in windows. Then you simply set up a DUN connection using that USB modem. The number should be *99# and make sure to add this line as extra init options:
ATZ+CGDCONT=1,"IP","ISP.CINGULAR"
For Bluetooth, first you need to install the latest Toshiba Bluetooth Stack for Windows. Don't use the microsoft one. Then just set up a BT Dun connection with the same settings.
Hope that helps...
Click to expand...
Click to collapse
Hi:
Thanks for the reply. I already have WModem installed by default. Is this the same thing?
Thanks!
Just use internet sharing. No need to configure a dialup modem/etc.
brainlb,
There doesn't seem to be much difference between the two plans you mentioned. I spoke to AT&T about this and they told me since I have a PDA phone I need the PDA connect plans and according to their system the MediaMax 200 is not compatible with my phone. However, a few people in the forums said they are using the MediaMax 200 plan without any problems. I may try this one day but not sure as yet.
so were on my phone do i look to find out whether i have .wap or .isp, or something else? Thanks
SORRY TO THREAD JACK BUT,
I JUST WANT LIVE UPDATES ON MY PHONE, MOSTLY WEATHER ON MY BACKGROUND. WOULD I NEED THIS?
http://www.wireless.att.com/cell-ph....jsp?LOSGId=&skuId=sku950103&catId=cat1510009
OR COULD GET A SMALLER DATA PLAN AND UPDATE EVERYTHING WHEN I CONNECT. WHAT IS THE BEST PLAN WITHOUT TETHERING?
Technically its supposed to be a PDA plan for our phones, However, I added the following plan to my sons phone and its been fine .. He doesn't pull tons of data so it hasn't flagged anything. If you don't need text messaging included then I'd look at the following:
Smartphone Connect Unlimited $19.99
http://www.wireless.att.com/cell-ph...jsp?LOSGId=&skuId=sku1040059&catId=cat1510009
I chose that over the MEdiaNet plan as I figured it would cause less suspicion with the data being used.
PsyOpWarlord said:
Technically its supposed to be a PDA plan for our phones, However, I added the following plan to my sons phone and its been fine .. He doesn't pull tons of data so it hasn't flagged anything. If you don't need text messaging included then I'd look at the following:
Smartphone Connect Unlimited $19.99
http://www.wireless.att.com/cell-ph...jsp?LOSGId=&skuId=sku1040059&catId=cat1510009
I chose that over the MEdiaNet plan as I figured it would cause less suspicion with the data being used.
Click to expand...
Click to collapse
THAT PLAN SAYS YOU ARE CHARGED FOR THE DATA YOU SEND AND REVIEVE. WHAT IS MEANT BY DATA SENT AND REVIEVED?, DOES THAT MEAN DOWNLOAD, AS IN RINGTONES?
I JUST TALKED WITH A REP FROM AT&T. THEY TOLD ME THE SMARTPHONE CONNECT UNLIMITED ISN'T FOR THE TILT. ( <AS STATED BY WARLOARD, WHAT PHONE DOES YOU SON HAVE? )
CAN I GET THAT ON MY TILT ANYWAY, AND GET A FAMILY TEXTING PLAN
LIKE THIS, THEN I SHOULD HAVE UNLIMITED DATA AND MY WHOLE FAMILY HAS TEXTING.
http://www.wireless.att.com/cell-ph....jsp?LOSGId=&skuId=sku980095&catId=cat1470003
I have a Tilt and am on a unlimited data plan. Now there is a legal way to tether that Att doesn't tell you about. Current plans selling at the ATT stores have PDA MEdia Connect with messaging. Starting at 39.99 and goes up from there with some referring to tethering. if you do not have a tethering plan you cannot connect to isp.cingular or suppose to. I called up ATT about a issue I had with VOIP needing to access a full internet instead of a wap.cingular proxy internet cause I was on the PDA Media Conenct plan. That how I found out about another plan called PDA Connect Unlimited for 39.99 without messaging that allows wap.cingular and isp.cingular connections. The ATT rep stated as long as you are authorized to connect to isp.cingular you can tether.
Savage Life said:
I JUST TALKED WITH A REP FROM AT&T. THEY TOLD ME THE SMARTPHONE CONNECT UNLIMITED ISN'T FOR THE TILT. ( <AS STATED BY WARLOARD, WHAT PHONE DOES YOU SON HAVE? )
CAN I GET THAT ON MY TILT ANYWAY, AND GET A FAMILY TEXTING PLAN
LIKE THIS, THEN I SHOULD HAVE UNLIMITED DATA AND MY WHOLE FAMILY HAS TEXTING.
http://www.wireless.att.com/cell-ph....jsp?LOSGId=&skuId=sku980095&catId=cat1470003
Click to expand...
Click to collapse
Correct most Reps will not add it as they know its not the proper plan. However you can add it yourself in most instances without going thru CS by logging into your ATT online account manager and going to Phone/Device and Add/Remove Features.
potpeye said:
I have a Tilt and am on a unlimited data plan. Now there is a legal way to tether that Att doesn't tell you about. Current plans selling at the ATT stores have PDA MEdia Connect with messaging. Starting at 39.99 and goes up from there with some referring to tethering. if you do not have a tethering plan you cannot connect to isp.cingular or suppose to. I called up ATT about a issue I had with VOIP needing to access a full internet instead of a wap.cingular proxy internet cause I was on the PDA Media Conenct plan. That how I found out about another plan called PDA Connect Unlimited for 39.99 without messaging that allows wap.cingular and isp.cingular connections. The ATT rep stated as long as you are authorized to connect to isp.cingular you can tether.
Click to expand...
Click to collapse
The ATT Rep apparently doesn't seem to know what he was talking about which unfortunately happens a lot. They do need to train their CS reps better. Call 5 times and you'll get 4 answers.
First they wrongfully gave you help on VOIP as its against ATTs Wireless Data Services Terms and Conditions:
http://www.wireless.att.com/cell-phone-service/legal/plan-terms.jsp
PROHIBITED USES INCLUDE, BUT ARE NOT LIMITED TO, USING SERVICES: (I) WITH SERVER DEVICES OR WITH HOST COMPUTER APPLICATIONS, INCLUDING, WITHOUT LIMITATION, WEB CAMERA POSTS OR BROADCASTS, CONTINUOUS JPEG FILE TRANSFERS, AUTOMATIC DATA FEEDS, TELEMETRY APPLICATIONS, PEER-TO-PEER (P2P) FILE SHARING, AUTOMATED FUNCTIONS OR ANY OTHER MACHINE-TO-MACHINE APPLICATIONS; (II) AS SUBSTITUTE OR BACKUP FOR PRIVATE LINES OR DEDICATED DATA CONNECTIONS; (III) FOR VOICE OVER IP; .....<rest snipped for brevity>....
Click to expand...
Click to collapse
And for tethering:
FURTHERMORE, PLANS (UNLESS SPECIFICALLY DESIGNATED FOR TETHERING USAGE) CANNOT BE USED FOR ANY APPLICATIONS THAT TETHER THE DEVICE (THROUGH USE OF, INCLUDING WITHOUT LIMITATION, CONNECTION KITS, OTHER PHONE/PDA-TO-COMPUTER ACCESSORIES, BLUETOOTH® OR ANY OTHER WIRELESS TECHNOLOGY) TO LAPTOPS, PCS, OR OTHER EQUIPMENT FOR ANY PURPOSE.
Click to expand...
Click to collapse
The CS Rep was correct that if you tether with a handset your supposed to use the isp.cingular APN (or else you'll incur additional data charges) but just because your provisioned to use that APN doesn't automatically mean your authorized to tether without being on a tethering plan. For instance I have the PDA Connect Unlimited plan which include the isp.cingular APN (unlike the PDA Max plans) and I can tell you tethering is not allowed. I've been thru 3 levels of data services support (business/premier support is a lot more trained) on this subject confirming the differences in plans doing research for the ATT forums under the username "Planet-Ed" helping others and working with the moderators their.
Beat em at their own game
ecltech said:
Just use internet sharing. No need to configure a dialup modem/etc.
brainlb,
There doesn't seem to be much difference between the two plans you mentioned. I spoke to AT&T about this and they told me since I have a PDA phone I need the PDA connect plans and according to their system the MediaMax 200 is not compatible with my phone. However, a few people in the forums said they are using the MediaMax 200 plan without any problems. I may try this one day but not sure as yet.
Click to expand...
Click to collapse
Looking at a few of the posts here, just wanted to throw in my 2 cents...don't know anything about the tethering, no need for it. As far as the different plans go, if you get an answer u don't like, just call 'em right back up. After I originally got the tilt back in Oct, the cheapest was the bbconnect, which the rep signed me up for, then couldnt tell me how to set it up and ended up taking it off.
you CAN sign up for a couple of the media max/smartphone connect plans on their website, but run the risk of getting charged down the line because those aren't technically data plans, can't remember the exact wording they gave, but not legal for the tilt or other devices which have full keyboards (PDA)...anyways, after about the 3rd call into the reps to get info, one of their geniuses signed me up for the media max unlimited plan w/ 200 messages for $20...he wasn't educated enough to know that it isn't supposed to be used w/ the tilt. The way I see it, they can't go back and overcharge me for being on the wrong plan if THEY signed me up for it...just work the system and use their stupidity for your benefit
potpeye said:
I have a Tilt and am on a unlimited data plan. Now there is a legal way to tether that Att doesn't tell you about. Current plans selling at the ATT stores have PDA MEdia Connect with messaging. Starting at 39.99 and goes up from there with some referring to tethering. if you do not have a tethering plan you cannot connect to isp.cingular or suppose to. I called up ATT about a issue I had with VOIP needing to access a full internet instead of a wap.cingular proxy internet cause I was on the PDA Media Conenct plan. That how I found out about another plan called PDA Connect Unlimited for 39.99 without messaging that allows wap.cingular and isp.cingular connections. The ATT rep stated as long as you are authorized to connect to isp.cingular you can tether.
Click to expand...
Click to collapse
Hi:
I am on a PDA unlimited data plan. Can you please tell me what settings you used to setup isp.cingular?
Thanks!
PS: I have searched and searched for the settings, and although I'm sure they are on xda, my search results sure didn't lead me to them.
EDIT: Although I was unable to find the info on XDA. I did find it elsewhere, I haven't yet tried them to see if they work properly, but if not, I guess I will have to spend hours on the fount with tech support to get the correct ones, lol. I will post the settings here just in case anyone needs them:
Under settings/connections/connections:
Look for MY ISP and tap on "add a new modem connection"
Enter a Name for the connection: REAL ISP or something like that
Select a Modem: cellular line (GPRS) for 8125/ cellular line (GPRS 3G) for 8525
use the access point name isp.cingular
On the next page, enter either ISP.CINGULARGPRS.COM or [email protected] (either will work) for username and CINGULAR1 for password (make sure they are all in caps)
Leave Domain name blank
Under advanced, make sure the only things selected are "Use server assigned IP address" and "Use IP header compression" - leave everything else unselected.
Click ok and then finish
PsyOpWarlord said:
And for tethering:
The CS Rep was correct that if you tether with a handset your supposed to use the isp.cingular APN (or else you'll incur additional data charges) but just because your provisioned to use that APN doesn't automatically mean your authorized to tether without being on a tethering plan. For instance I have the PDA Connect Unlimited plan which include the isp.cingular APN (unlike the PDA Max plans) and I can tell you tethering is not allowed. I've been thru 3 levels of data services support (business/premier support is a lot more trained) on this subject confirming the differences in plans doing research for the ATT forums under the username "Planet-Ed" helping others and working with the moderators their.
Click to expand...
Click to collapse
So do you happen to know if there IS a plan where tethering is allowed? I also have the PDA Connect Unlimited, and can tether, but don't want to get dinged on my bill so I've been judicious with my use (i.e. emergency only)...
Myabe a better way to ask my question is - how do you get Laptop Connect, do you have to call? It doesn't show up on the website, as I have a family plan - does it need to be a business plan? ugh...
Can anyone point me to a guide to setting up a proxy server on my windows machine at home so that I can use that on my Tilt for free (relatively) internet?
Ive scowered forums, cant find a solid solution. Can you anyone help?
can anyone help?
How exactly would it be "free" internet? You are still going to need a data connection to access the proxy server.
it would be free because I would not be paying internet charges through my cellular provider using their wap server to access the internet, rather I would bundle the cost into my already home internet charges if I set up a home proxy and pointed my phone there.
It still would register as me making a call, but it would not register as me using the internet, hence 'free' internet.
Well technically that's what Opera Mini does. They have their "proxy" servers to feed you web pages. Guess what? AT&T doesn't care. Either way it's still data and I get charged for it (although I do have an unlimited data plan so that point is moot). They don't differentiate between web and any other kind of data access. It's all data and what you're proposing won't change the fact that you need a data plan to do it and will get charged for it.
Lidberg said:
Well technically that's what Opera Mini does. They have their "proxy" servers to feed you web pages. Guess what? AT&T doesn't care. Either way it's still data and I get charged for it (although I do have an unlimited data plan so that point is moot). They don't differentiate between web and any other kind of data access. It's all data and what you're proposing won't change the fact that you need a data plan to do it and will get charged for it.
Click to expand...
Click to collapse
if you redirect your proxy outside of AT&Ts MediaNET you will not get charged
OK, apparently you didn't read anything I typed. Let's look at it another way.
I have a Tilt. I can enable or disable AT&T's proxy server. Does it really matter? NO. Why? Because in both cases data is being transmitted over EDGE or HSDPA. It's bits and bytes traveling over the airwaves. Whether you are directly connected to the internet, using AT&T's proxy or your own proxy, it's all 1's and 0's to them. If they see those 1's and 0's being transmitted from your phone to the internet, you are getting charged for it.
If it was that easy to bypass AT&T's data plan, wouldn't you think everyone would be doing it? I know I would.
Prove me wrong.
In short: As long as you phone has to send a signal to the cellular towers that AT&T owns and operates, you will be charged data access. The Kaiser has built-in wi-fi, you can get around [most] of the associated issues with WAP by using that when you're at home; however, some programs require a WAP connection as opposed to a standard wi-fi connection, which would require you to send data over the air to AT&T's towers. It doesn't matter where the proxy itself is located, so long as you have to send data to the cellular towers, you're SOL.
mjhill said:
In short: As long as you phone has to send a signal to the cellular towers that AT&T owns and operates, you will be charged data access. The Kaiser has built-in wi-fi, you can get around [most] of the associated issues with WAP by using that when you're at home; however, some programs require a WAP connection as opposed to a standard wi-fi connection, which would require you to send data over the air to AT&T's towers. It doesn't matter where the proxy itself is located, so long as you have to send data to the cellular towers, you're SOL.
Click to expand...
Click to collapse
Good explanation
You need to turn off or disable the GPRS connection if you want to use WiFi without paying AT&T connection charges. There used to be a great program over at MoDaCo called NoData which when you ran it showed you the connections you had and let you disable the ones you wanted to have off. Then you could use Wifi without starting a GPRS connection. The program still exists, do a search for it hear or google it at MoDaCo. Only thing, I seem to recall that the creator of the program said it was only for WM5. I've seen people say that it works in WM6 but haven't tried it myself.
Short of that you could just go into DataComm and tap on the Data connection icon, to turn if off as you tap WLan to turn it on. Of course that will disable your data connection and push e-mail and you'll have to remember to start it up again afterwards if you want to get your push e-mail.
jspetrino said:
Can anyone point me to a guide to setting up a proxy server on my windows machine at home so that I can use that on my Tilt for free (relatively) internet?
Ive scowered forums, cant find a solid solution. Can you anyone help?
Click to expand...
Click to collapse
Did you happen to be a Verizon customer before you moved to ATT? Verizon tracks data usage through their proxy, so yes, you COULD get free internet with them. I did it all the time, and i miss it. ATT is a bit smarter about it. Instead of forcing you to pay for an unlimited plan or nothing... ATT lets you get on the internet whenever you want... they just charge you for it.
In short, AFAIK, there is no way to get free internet through ATTs network like i used to with verizon.
I had a similar question, which got no replies....
T-mobile puts you through it's proxies, so that pictures etc are compressed, which is a bit pants. That's one reason why you might want to do as described in the OP.
http://forum.xda-developers.com/showthread.php?t=345029
MHC48 said:
You need to turn off or disable the GPRS connection if you want to use WiFi without paying AT&T connection charges.
Click to expand...
Click to collapse
This simply isn't true. If you enable WiFi and you're passing traffic through GPRS, then you don't have your WiFi network configured correctly.
Go to Settings-Connections-WiFi and change the pull down for your adapter from "Work" to "The Internet. Associate with AP. Surf to your heart's content without using the cellular network.
You can shut off the phone connection if you like, but there's no need to do so.
Edit: Just for giggles, I fired up my WiFi configured as above and grabbed a 3MB file directly on the phone. GPRS Monitor recorded zero traffic increase.
while(!(linux)){wm} said:
Did you happen to be a Verizon customer before you moved to ATT? Verizon tracks data usage through their proxy, so yes, you COULD get free internet with them. I did it all the time, and i miss it. ATT is a bit smarter about it. Instead of forcing you to pay for an unlimited plan or nothing... ATT lets you get on the internet whenever you want... they just charge you for it.
In short, AFAIK, there is no way to get free internet through ATTs network like i used to with verizon.
Click to expand...
Click to collapse
yes I used to be Verizon never go back to them again! I used to use a quick fix on one of my LG phones redirecting to a proxy and i got free internet that way.
Has anyone used any tethering apps successfully? I downloaded Wifi Tethering for Root and have not been able to connect. Foxfi will not work on my current phone. Is there any way to change settings in the phones system folder to take advantage of it's built in hotspot capabilities. Well without big red knowing about it.
WiFi Hotspot - Options
Clarke33 said:
Has anyone used any tethering apps successfully? I downloaded Wifi Tethering for Root and have not been able to connect. Foxfi will not work on my current phone. Is there any way to change settings in the phones system folder to take advantage of it's built in hotspot capabilities. Well without big red knowing about it.
Click to expand...
Click to collapse
Clarke33,
Do you want to use the Kindle Fire 2 as a WiFi Hot Spot or Access Point? When you say Tether, do you want
to connect your phone to your computer through USB, this is called Tethering. When you use the phone as
a WiFi connection, this is called a Hot Spot or Access Point. What type of phone would you like to use as a Hot
Spot? There is a solid app called WiFi HotSpot / WiFi Tether. The for USB Tethering, there is WiFi HotSpot &
USB Tether Lite. Respond with a little more details.
prokennexusa said:
Clarke33,
Do you want to use the Kindle Fire 2 as a WiFi Hot Spot or Access Point? When you say Tether, do you want
to connect your phone to your computer through USB, this is called Tethering. When you use the phone as
a WiFi connection, this is called a Hot Spot or Access Point. What type of phone would you like to use as a Hot
Spot? There is a solid app called WiFi HotSpot / WiFi Tether. The for USB Tethering, there is WiFi HotSpot &
USB Tether Lite. Respond with a little more details.
Click to expand...
Click to collapse
I have a grandfathered unlimited data package through Verizon and I want to be able to use my phone to supply the wifi if I am not close to a public wifi. I ran wifi analyzer and have a strong signal from my phone but it is an ad hoc signal which I understand the K f doesn't recognize.
WiFi Hotspot - Options
Clarke33 said:
I have a grandfathered unlimited data package through Verizon and I want to be able to use my phone to supply the wifi if I am not close to a public wifi. I ran wifi analyzer and have a strong signal from my phone but it is an ad hoc signal which I understand the K f doesn't recognize.
Click to expand...
Click to collapse
Clarke33,
Now I understand! Yes, Ad Hoc is not supported by many devices. Change the settings from Ad Hoc
to Infrastructure in the WiFi Application. This will be in the Options or Settings of the WiFi Tethering
Application.
Ok, getting closer to something working. I downloaded Wifi Tether for Root and it has a bunch of device selections and different option but something is still not quite right. With generic ICS selected and startup method selected Netd (master) the KF recognizes the signal as infrastructure mode and will allow me to connect but when I try to access the web all I get is a white screen that never loads. Why?
I have answered my own question. I tried another app called Open Garden Wifi Tether and it works like a champ. I have it set on generic ICS and setup method as Netd (master). So far everything is working great. Before anyone thinks bad of tethering against the will of the big red V, I have a plan with 5 lines and 3 data packages (@$90/month) and I'll be danged if I am going to give them any more since I have unlimited data.
Kindle Fire HD and 2 Tethering
Clarke33 said:
I have answered my own question. I tried another app called Open Garden Wifi Tether and it works like a champ. I have it set on generic ICS and setup method as Netd (master). So far everything is working great. Before anyone thinks bad of tethering against the will of the big red V, I have a plan with 5 lines and 3 data packages (@$90/month) and I'll be danged if I am going to give them any more since I have unlimited data.
Click to expand...
Click to collapse
Clarke33,
I have no problem with Tethering. I believe that we pay enough in Service Fees and as long as
you are not sharing the connection with 5 neighbors with the motivation to make money, there
is no problem with personal use. I am happy to hear that you were able to make it work. Good
job Clarke33!
No, the only thing I tether from my phone is my KF. I have actually been also playing with a hotspot toggle and using the phone's native hotspot. So far this has also worked and has not activated the screen from Verizon saying I need to pay an additional amount.
Verizon Hot Spot
Clarke33 said:
No, the only thing I tether from my phone is my KF. I have actually been also playing with a hotspot toggle and using the phone's native hotspot. So far this has also worked and has not activated the screen from Verizon saying I need to pay an additional amount.
Click to expand...
Click to collapse
Clarke33,
I really believe it will not trigger the Verizon Firmware, you did it, enjoy the results.
any other good tethering apps? open garden isnt there any more and zt-180 doesnt work.
I have a Samsung Ativ S which I have been using as a WiFi hotspot to connect my laptop and Nexus 7 to while I am working away. Recently got a text to tell me if I carry on I will be cut off on my mobile contract. I have a sim only deal that gives me unlimited calls, text and 3G internet so I'm a bit brassed off. It took an hour of searching to find the no teathering in the conditions of use.
Any way what I want to know are there any Windows Phone apps that will hide the teathering from my supplier? I am hung off a T Mobile/ Orange network.
Daedalus1
ATIV S can use wired tethering (search the forum for it, I posted instructions and drivers sometime last year). Even though my plan supports tethering, it's data-limited and when I use the wired tethering they don't list the data usage for it so I'm guessing it's not detectable, or at least not easily.
There's also an app called TetherX or something like that, which will act as a SOCKS proxy server on the phone; you then set your PC to use the phone as its proxy server. Won't work for non-proxy-aware apps but otherwise should do the trick.
Of course, this all assumes they're checking whether or not you're using the phone's tethering feature somehow, rather than doing something more nefarious like deep packet inspection. If they're checking "are you using the 'Internet Sharing' feature?" then I would expect them to just limit its usage; the phone has the capability to test whether or not tethering is permitted on your plan, and does so test by default. If they're using DPI and noticing traffic to/from PC clients (based on user-agent strings or something) then you're in trouble unless you can route all your traffic over SSL, which mostly thwarts packet inspection.