hi guys i have a problem with my phone (obviously)
when i try to get into recovery all i get is a scrambled screen, it used to be ok before i installed a new rom, will it be a case of un root then re root or is there an easier fix?
cheers
steve
Could you upload any image/photo about it?
I think is the bootloader. What is your actual rom? And what rom before flash?
---------
Well, I'm sure your. Problem is whit de bootloader, just flash gingerbread whit bootloader via Odin. look in the forum for gingerbread whit sbl, when you flash them you could install any cooked/modify rom shutout problems whit the screen
Enviado desde mi Motorola Startac....
Digo SGS
hi mate, done that and it worked a treat thanks but now when it boots up it gets to the main screen then reboots to splash screen then to main screen n then just keeps looping like that, and if i try to reflash my rom via recovery it says no space left on phone :/ any ideas at all?
cheers
steve57925 said:
hi mate, done that and it worked a treat thanks but now when it boots up it gets to the main screen then reboots to splash screen then to main screen n then just keeps looping like that, and if i try to reflash my rom via recovery it says no space left on phone :/ any ideas at all?
cheers
Click to expand...
Click to collapse
What rom are you trying to flash via recovery?
First. You need to enter in recovery and make wippe data and wippe cache, after that, You need to flash via Odin a clear rom.
Enviado desde mi Motorola Startac....
Digo SGSII
Related
Hi all
This problem that I have is pissing me off so much. I rooted my phone and then unrooted it, and then my Android Market icon was missing. Now, whenever I want to do a factory reset, the phone goes back to ClockworkMod Recovery every single time. I want to get rid of this CMR. Also, I've tried to stock original rom on my phone but it does not work at all. What is happening? My phone is LG Optimus 2x P990. But I always get this error where I can't apply the DLL file. This really annoying me right now. I've tried everything and NOTHING works. I regret rooting my device.
Please help me thanksss
Lena
Here's howto remove the ClockWork Recovery Mode:
http://forum.xda-developers.com/showthread.php?t=1021554
You can flash the original image using SmartFlash.
Get your original Firmware image from here. The instructions for SmartFlash are here
how to flash the zip
sorry I am completely new to this. How do I apply the zip? Do I boot into recovery mode and install zip from there? I have done this with other zip files before and it always ended with:
'installation aborted'
im trying it now, but its stuck at:
'Restoring stock recovery image'
smart flash
smart flash doesn't work for me. I always get this time out error.. I really don't know what to do now. The recovery stock file did install but then I chose 'reboot system now' in CWM and it got stuck with the LG logo. Now, it's back to ClockWork Recovery Mod again!! i don't understand. Please help.. Many thnks
what type of error?
your device-manager on your pc recognizes your 2x, when you connect it as described in the instructions?
THis is the error:
00:00.0 Sec ownload Start...
00:07.5 Sec :We can't communicate with specific port
and now, I can't start my phone. It gets stuck on LG logo. I tried the remove CWM method, it worked but when I rebooted my phone, my phone would not start at all. P. Please help.
yep it recognises it but it always gets this time out error... what should I do? Please help.. Many thanxx
Does the COM port get detected automatically when you plugin the phone ?
pinkdiva said:
yep it recognises it but it always gets this time out error... what should I do? Please help.. Many thanxx
Click to expand...
Click to collapse
Same with me. Go on trying at some point it will work. It happens with me everytime i flash with smartflash. Myself also waiting for a definite solution to this problem. i think the problem lies with usb drivers. I also tried with taking out card and sim but cannot pinpoint the problem. Any successful flasher may upload the drivers. Moreover i also disabled programmes like antivirus etc running in background. Waiting for a more definite problemfree flashing solution.
I think, install drivers to smartflash, no other drivers, and later smartflash.
Enviado desde mi Optimus 2X usando Tapatalk
stuck on SE log after rooting and flashing new rom ops lol
--------------------------------------------------------------------------------
hey, ok so now i dont know how to start but i will just say that i rooted my phone and i get to enter the Xrecovery. after that i tried to install custom rom and it installed well. then i turned of the phone and its just stuck on the white SE word. it gave me vibrate and its just stopped on SE!!!!! i left it for 3 min like that and its still!!!!! i cant get into recovery again and i cant do anything in the phone more than taking out the battery and putting it back again then power it on again and do that over and over ( because it doesnt pass the SE word)
HEEEEEEEEELLLLLLLLLLLLLLPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
any help pls??
thanks
You have soft bricked your phone. Use PC companion/ SE update service to reinstall stock 2.1
Sent from my X8 using XDA
Use the search button buddy, please!
Btw, what costum rom do you trying to install? Are you on stock kernel?
Sent from my X8 using xda premium
mahmoudsalem91 said:
stuck on SE log after rooting and flashing new rom ops lol
--------------------------------------------------------------------------------
hey, ok so now i dont know how to start but i will just say that i rooted my phone and i get to enter the Xrecovery. after that i tried to install custom rom and it installed well. then i turned of the phone and its just stuck on the white SE word. it gave me vibrate and its just stopped on SE!!!!! i left it for 3 min like that and its still!!!!! i cant get into recovery again and i cant do anything in the phone more than taking out the battery and putting it back again then power it on again and do that over and over ( because it doesnt pass the SE word)
HEEEEEEEEELLLLLLLLLLLLLLPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
any help pls??
thanks
Click to expand...
Click to collapse
here check this http://forum.xda-developers.com/showthread.php?t=1011071
always do a fullwipe from the recovery menu before flashing a custom rom
mahmoudsalem91 said:
stuck on SE log after rooting and flashing new rom ops lol
--------------------------------------------------------------------------------
hey, ok so now i dont know how to start but i will just say that i rooted my phone and i get to enter the Xrecovery. after that i tried to install custom rom and it installed well. then i turned of the phone and its just stuck on the white SE word. it gave me vibrate and its just stopped on SE!!!!! i left it for 3 min like that and its still!!!!! i cant get into recovery again and i cant do anything in the phone more than taking out the battery and putting it back again then power it on again and do that over and over ( because it doesnt pass the SE word)
HEEEEEEEEELLLLLLLLLLLLLLPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
any help pls??
thanks
Click to expand...
Click to collapse
u got two options :-
1) flash .ftf files using flashtool!
2) use wotan client !
if u want details on this... m ready to help !
anashiva said:
You have soft bricked your phone. Use PC companion/ SE update service to reinstall stock 2.1
Sent from my X8 using XDA
Click to expand...
Click to collapse
thanks alot.. i done that and its working great now ... i was tired so i flashed x10mini rom and not the x8 lol my bad ...
thanks everyone for your fast support . you all are the best
Seriously can someone please explain to me what the heck the above mean? I get the notion of a brick but what the heck is the difference between Super brick? Hard / Soft Brick? Finally, not really brick but what's Pixel Salad!?
Thanks!
altrstar said:
Seriously can someone please explain to me what the heck the above mean? I get the notion of a brick but what the heck is the difference between Super brick? Hard / Soft Brick? Finally, not really brick but what's Pixel Salad!?
Thanks!
Click to expand...
Click to collapse
Soft brick= a FAILURE of the device that can be reverted by the user
Hard brick= a FAILURE of the device that has to be reverted via external devices see jtag
Superbrick= a FAILURE of the device where the only solution the service center and a replacement of the component that malfunctions.
Pixel salad = a problem of the graphics unit or the screen to display correctly the image and put instead random colored pixels on some areas of the screen or the whole screen.
This is my interpretation of those issues everyone can correct it if he thinks that those expansions are incorrect.
Hope it helped you understanding few of those issues.
GL& HF
Sent from my GT-N7000 using Tapatalk 2
Braxos said:
Soft brick= a FAILURE of the device that can be reverted by the user
Hard brick= a FAILURE of the device that has to be reverted via external devices see jtag
Superbrick= a FAILURE of the device where the only solution the service center and a replacement of the component that malfunctions.
Pixel salad = a problem of the graphics unit or the screen to display correctly the image and put instead random colored pixels on some areas of the screen or the whole screen.
This is my interpretation of those issues everyone can correct it if he thinks that those expansions are incorrect.
Hope it helped you understanding few of those issues.
GL& HF
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
You are spot on!!
Hi, I flashed N7000ZSLPF ICS with bootloader and rooted afterwards. Everything was perfect until i decided to flash cm9 nigthly signed.zip and did a direct reboot. Now nothing happens when i try to turn the phone on
What kind of brick is this? Can somebody please tell me ?
Is there any possibilities to get the phone fixed?
Thank you all for your answers allready
Wish u all a nice day
Nefret90 said:
Hi, I flashed N7000ZSLPF ICS with bootloader and rooted afterwards. Everything was perfect until i decided to flash cm9 nigthly signed.zip and did a direct reboot. Now nothing happens when i try to turn the phone on
What kind of brick is this? Can somebody please tell me
Click to expand...
Click to collapse
I'm not 100% sure, but performing a flash under lpf isn't recommended. How did you root lpf after flashing? And when you say "did a direct reboot" what do you mean? Also when you say doesn't turn on at all, do you mean no display whatsoever or enters Samsung boot loop? Are you able to enter recovery or download mode?
Sent from my GT-N7000 using xda premium
Nefret90 said:
Hi, I flashed N7000ZSLPF ICS with bootloader and rooted afterwards. Everything was perfect until i decided to flash cm9 nigthly signed.zip and did a direct reboot. Now nothing happens when i try to turn the phone on
What kind of brick is this? Can somebody please tell me ?
Is there any possibilities to get the phone fixed?
Thank you all for your answers allready
Wish u all a nice day
Click to expand...
Click to collapse
You should have read the warning about LPx kernels (LP1, LP5, LP6, LPY, LPF)
Wiping or flashing in recovery will probably cause superbrick.
Sent from my GT-N7000 using XDA
Nefret90 said:
Hi, I flashed N7000ZSLPF ICS with bootloader and rooted afterwards. Everything was perfect until i decided to flash cm9 nigthly signed.zip and did a direct reboot. Now nothing happens when i try to turn the phone on
What kind of brick is this? Can somebody please tell me ?
Is there any possibilities to get the phone fixed?
Thank you all for your answers allready
Wish u all a nice day
Click to expand...
Click to collapse
The way to go from ANY non-CM9-based ICS Rom to a CM9-based Rom is via Gingerbread.
You should've first used PC Odin to go back to GB, root your Rom, then flash CM9.
You have most probably superbricked your phone.
SpyderTracks said:
I'm not 100% sure, but performing a flash under lpf isn't recommended. How did you root lpf after flashing? And when you say "did a direct reboot" what do you mean? Also when you say doesn't turn on at all, do you mean no display whatsoever or enters Samsung boot loop? Are you able to enter recovery or download mode?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Did root using cfs root trough Odin Pc. With a direct boot i mean that i just rebooted without doing the partiton thing just flashed the image and rebooted.
And when i say doesnt turn on at all i mean that absolutely nothing happens, no power at the screen no detection trough usb on pc no download mode or anything.
tryied to flash before and did just reboot, back then did just got the boot looop probem and did a recovery to ics. this last time i tried again to show a friend in a hurry and failed epicly
Nefret90 said:
Did root using cfs root trough Odin Pc. With a direct boot i mean that i just rebooted without doing the partiton thing just flashed the image and rebooted.
And when i say doesnt turn on at all i mean that absolutely nothing happens, no power at the screen no detection trough usb on pc no download mode or anything.
tryied to flash before and did just reboot, back then did just got the boot looop probem and did a recovery to ics. this last time i tried again to show a friend in a hurry and failed epicly
Click to expand...
Click to collapse
You are definitely bricked, I fear. Head to the nearest service centre.
I am from Kuwait ..
I purchased Samsung galaxy Note N7000 15 Days before
I have Installed King Droid ICS mania 2.1 later yesterday i updated to King droid ICS mania 3.0 and Samsung galaxy s3 Mod updated .. after that i restarted my NOTE but its not booting
i can go to Download mode and Recovery mode ..
even i can see the Install ZIP from SD card and all in CW ..when i Update it says
Can't Mount EMMC
I tried to Mount also But failure ..
I tried Stock rom of ICS official to Update Using ODIN 1.85 .. it stops at
<ID:0/008> factoryfs.img ..
I am worried I cant go for warranty Bcoz at Boot It says Binary count (5)
Please Help me Out
hi there my wife's mini s5570 + is suddenly stuck in a bootloop
she took it from loader this morning turned it on and stuck in loop
how do i solve this?
it is still on original gb 2.3.6
please help wife is desperate!!
ikkeenjij36 said:
hi there my wife's mini s5570 + is suddenly stuck in a bootloop
she took it from loader this morning turned it on and stuck in loop
how do i solve this?
it is still on original gb 2.3.6
please help wife is desperate!!
Click to expand...
Click to collapse
Already tried to wipe cache/data from recovery??
Inviato dal mio GT-S5570 con Tapatalk 2
no cant get into recovery only downloadmode?
ikkeenjij36 said:
no cant get into recovery only downloadmode?
Click to expand...
Click to collapse
Hmm... so try to reflash a stock rom with ODIN and after go into recovery and wipe data....
hi first of all thanx for your help.
but problem is its still on stock/origanal firmware out of the box.
so not rooted.
ikkeenjij36 said:
hi first of all thanx for your help.
but problem is its still on stock/origanal firmware out of the box.
so not rooted.
Click to expand...
Click to collapse
I Know.. but if you are able to flash a custom recovery like CWM i think you can wipe data and\or flash a custom rom instead a stock
ikkeenjij36 said:
hi first of all thanx for your help.
but problem is its still on stock/origanal firmware out of the box.
so not rooted.
Click to expand...
Click to collapse
you dont need root to flash 2.3.6 via ODIN. if only download mode works for u you only have few options. 1 if u have warranty send it back to samsung. 2 install clockworkmod recovery via odin multi downloader or reflash gingerbread 2.3.6 via odin while your phone is in download mode thats it!. easily sorted when u know how if download mode still works.
strange for a new phone to have bootloop.
hi there after coming home tried to flash the phone
but only thing i get is i hear on my pc that it is connected but not to be seen on my pc.
when i put it in download mode odin doesn't recognize the phone what is to be done with this.
can't get into recovery mode either
happend only once did recovery wipe data but then i got e:
can't mount data?
please help getting desperete to after flashing my sgs2 for over 20 times without any problem
i think the problem is yhat it's not in debug mopde but there is no way for me to get it there becaus cant get into the damn thing
please again how to solve before taking it back for warranty because its a long drive for me to get to the shop
Using already described methods of wipe and restore I cannot get it to work at all.
I get to DOWNLOADINg or even to ANdroid restore menu - but cannot get to log in
ODIN can only flash the OI firmware and not the OH nor OF.
Thats because the OI updates bootloader and you cant go back. Have to stick with latest update
Enviado desde mi SM-N920C mediante Tapatalk
@bighleo114312: Yeh right - I am stuck all right - it is stuck on logo screen . So why would I want stick to that?
123L said:
@bighleo114312: Yeh right - I am stuck all right - it is stuck on logo screen . So why would I want stick to that?
Click to expand...
Click to collapse
Also having this issue. My S6 randomly rebooted on me and is stuck on the logo screen. I'm on 5.1.1. I cannot access the recovery menu, only the download (Odin) menu. Attempting to flash the stock rom thru ODIN does nothing. Doing the emergency recovery via Smart Switch also does nothing. It goes thru the motions but does not solve the boot loop. Anyone have any other suggestions?