USB-Debugging is enabled. ADB worked fine until after update was installed. Now it lists my device as offline. I've read every thread I could find about this error, but I haven't found anything that applies to my Droid 3. I'm running OSX, and I've tried it on several different systems. Same issue..."device offline". Anyone else having this problem? Solutions? =/
Did you try reinstalling the drivers? That works sometimes, it seems everything we do on this phone requires a different set of drivers. I have the basic phone drivers, adb drivers, and rsdlite drivers for this device installed, and removing one or more of them and reinstalling happens frequently around here
Droid 1 Rooted (ChevyNo1 0.9MV Kernel, LGB2.6)
Droid 3 Rooted (Stock Kernel, Custom lite De-bloat)
I'm having the same problem. My phone was working in ADB before, but I never really use it much, so I just realized that it's showing offline in ADB. I've reinstalled all the drivers for the phone, cleared my computers registry of all the errors, and nothing has helped yet, still shows offline. Anyone have any suggestions?
I having the same issue.
Do you have any custom themes applied?
I can get mine to work by cycleing between PC mode and charging then turning debug off and back on. It always works after a couple trys.
Related
sorry if this clutters up the forum for a bit, i promise to delete it when it dies.
i've recently started using adb when i flashed over to 5.0.2h. i followed the instructions in the tutorial and was able to use adb. 2 nights ago, i began doing more complicated commands (for me) and tried to push a .apk into /system/app.
i wasn't immediately successful but i eventually got it in there and decided to reboot my phone. after this reboot, however, i lost the use of adb. i tried upgrading to the usb drivers haykuro posted, uninstalling them and re-trying the old one, rebooting the computer, rebooting my phone and none of it works. i've since wiped my phone and flashed it with the latest h build from haykuro (thanks haykuro!) but that didn't work either. now i'm trying to see if the 1.5 sdk will work.
i was wondering if anyone would have an idea about what i should do next. should i reinstall adb? try it on another computer? another cable? it's not the worst loss in the world, my phone is fine and my usb cable still works in the conventional way. i even checked to see if i somehow lost root and i was able to get su on the terminal emulator. but i still want the use of adb for nandroid, if nothing else.
thanks in advance!
I had the same problem after flashing to the G rom. I couldn't get ADB to work but fastboot recognized my phone and I was able to flash back to my backup. First time I did a complete wipe before flashing, second time, no wipe, made no difference in either case for me
When you plug Dream into your computer, does it show up in the Device Manager list? What is the entry? Hopefully it says HTC Dream Composite ADB Interface
I just had the same problem, I had to update the driver and it is working fine now.
Which driver did you use? I downloaded the one on the saphire port project page, but couldn't find a way to install it. When I open device manager, there is no ADB interface listed.
zer0day said:
Which driver did you use? I downloaded the one on the saphire port project page, but couldn't find a way to install it. When I open device manager, there is no ADB interface listed.
Click to expand...
Click to collapse
Give me a few minutes I will find you a link for it.
jordanjf86 said:
Give me a few minutes I will find you a link for it.
Click to expand...
Click to collapse
Here it is. http://dl.google.com/android/android_usb_windows.zip after downloading this when you go to update your driver in device manager make sure to use this. Hopefully this will help it worked for me.
jashsu said:
When you plug Dream into your computer, does it show up in the Device Manager list? What is the entry? Hopefully it says HTC Dream Composite ADB Interface
Click to expand...
Click to collapse
yes, that's what it comes up as. and i've tried the usb drivers from haykuro's page and they didn't work before and after rebooting my computer.
i'm on vista and it wont accept the updated drivers. it downloads the standard removable memory drivers and wont let me update to anything else. anybody have any ideas
just installed the 1.5 apk and adb and it works again. for people running haykuro builds, i would suggest trying this if you have adb problems. just intall the 1.5 sdk as normal, copy adb.exe and AdbWinApi.dll into \system32 and you should be good.
unless requested i will delete this thread in two days. thanks everyone!
Hmm... i tried that and its still not working ):
Ive tried like 10 different USB drivers from various sites including this one, downloaded the 1.5 SDK and installed it, wen through several reboots and it always says either that the driver is for the wrong platform, the most up to date one is ALREADY installed (HTC Bootloader), or that Windows couldn't find any drivers.
Under ADB Interface in device manager is "%USB\VID_0BB4&PID0FFF.DeviceDescRelease%"
did you try and update the driver through the device manager? i've heard that it's the only way to update it for some people.
I had already Posted & Solved This Issue here : http://forum.xda-developers.com/showthread.php?t=493703
Go Check It, It ll work for sure....
90% of the time the problem is with the drivers etc. Use this tutorial to fix that : http://goo.gl/OS3Vi
If you still encounter the problem then you can use ADBwireless available at google play to wirelessly connect your device to the computer
Hope it helps :highfive:
Hi
I actually replying about the bible quote you have mentioned? you into theology?
I have 2 Nexus One's. The first was rooted and I had the ADB USB driver (v3) installed on my Windows XP Pro SP3 desktop and all worked fine.
I now have a second Nexus One. I rooted it, and after turning on "USB debugging" and wanting to use it with ADB, the driver USB installed again. But now I get constant "Found New Hardware Wizard" install loops, for both phones with "USB debugging" turned on.
Every time I plug either phone in, or reboot, Windows wants to reinstall the ADB driver. Right after it completes a driver install it wants to do it again.
Solutions I've tried; I have rebooted after install, uninstalled the drivers from Device Manager, deleted the drivers manually from the registry, removed any possibly associated hidden drivers that were marked error in Device Manager, and combinations of the above in various order.
I know that USB driver install loops on Windows can happen to any type of device, not just the Nexus, but in my case it's only on the ADB driver for Nexus One.
Can anyone suggest what I can do other than what I listed to stop the ADB driver endless install loop, or what is causing it?
Thank you.
ever find a resolution for this? im having the exact same issue.
my phone was purchased used, already rooted and bootloader unlocked...
if i hit cancel on one of the multiple install attempts it seems to stop until i unplug then plug back inthe phone...
i can see the phone through ADB thou....
ive not tried to run any commands not knowing the actual state of the install, dont want a brick...
johng75 said:
ever find a resolution for this? im having the exact same issue.
my phone was purchased used, already rooted and bootloader unlocked...
if i hit cancel on one of the multiple install attempts it seems to stop until i unplug then plug back inthe phone...
i can see the phone through ADB thou....
ive not tried to run any commands not knowing the actual state of the install, dont want a brick...
Click to expand...
Click to collapse
No, I haven't found a solution to this yet. And you are the only person here that has replied.
I did contact Google and HTC and asked for their help. But since the phone is rooted I got the expected replies from both, that rooting violates warranty so they refused to help. I was expecting that, but have heard that the occasional tech support person at Google will still offer support within reason. But not in my case.
If and when I figure this out, I'll post it here to help you out.
johng75 said:
ever find a resolution for this? im having the exact same issue.
my phone was purchased used, already rooted and bootloader unlocked...
if i hit cancel on one of the multiple install attempts it seems to stop until i unplug then plug back inthe phone...
i can see the phone through ADB thou....
ive not tried to run any commands not knowing the actual state of the install, dont want a brick...
Click to expand...
Click to collapse
Hi JohnG75,
Just wanted to let you know my constant ADB driver reinstalls have stopped. But unfortunately I have nothing constructive to point out as a solution. I spent hours online researching for a possible solution, and found nothing worthwhile yet. I've posted in several places and got no helpful replies other than trying System Restore and going back to a point before this happened. Of course that's hardly a guaranteed fix, plus you loose any other updates and installs you have made since then.
In my case, I left "USB debugging" turned off on my phone since I wrote you last, and the only thing that has changed system wise for me, is I have installed 2 unrelated device drivers since, and MS has pushed out a security update. So today when I turned "USB debugging" back on in the phone, it did a single device install, and it didn't repeat. So hopefully this resolves it for me.
If I were to take a guess as to what appears to have solved it in my case, I would say it was the new unrelated device driver installs. Perhaps it cleared whatever was wrong in the device driver system. So maybe if you were to install some new device driver you need, or uninstall an existing one, reboot and then reinstall that same device driver, perhaps it will clear whatever is messed up in your device drivers.
Sorry I can't be of more help, and my suggestion is only a guess based on my only recent system changes.
There is very little documented solutions to this problem out there, only lots of people that have complained about the same type of problem, with every sort of device you can think of. And the solutions documented are always specific to those exact devices.
Ok I'm having some issues.
So Last night, ADB was working perfect. it detect my device and everything. Then I was testing the webtop hack and i flashed unleashed 1.3 and it was still working. I got the webtop hack working on it.
So now i wanted to see if i could get it on a liberty alpha build. Everything went smoothly, and then on liberty when i try to get my device in adb it detected it but said it was offline, So i was unable to do what i needed.
So this morning I thought maybe something i messed up. So I FXZ my Bionic. i uninstalled the drivers and installed them back, I reinstalled adb.
I tried it unrooted still didn't work but didn't give the offline device something different ill explain soon.
So i rooted and tried same as when i wasn't rooted,
So i installed unleashed 1.3 again and it does this see picture below.
It detects it before i go into adb shell. but after im in adb shell. nothing. I'm still unable to do what i need.Started to do this after FXZ, on unrooted, rooted, unleashed.
EDIT: I GOT IT SAYING DEVICE IS OFFLINE AGAIN :/
Any help with this would be really appreciated.
Thanks guys
Aaron
Well I will start by saying generally you want to post this kind of question in the Q&A section and not the Development section. Anyhow, this may sound like an insulting question but you do have USB Debugging on correct? Usually ADB will say a device is "offline" when it knows a device is connected but there is a setting on the phones end preventing it from connecting. Once you say yes or no to USB debugging we can continue to diagnose.
Eh, I didn't think about that sorry.
and yes i have usb debugging on. i have tryed it on and off.
Help!
My optimus 2x is not detected when I plug it to my laptop via USB.
Turn on mass storage" in the phone does not appear, it's like I'm just plugging in into a wall charger.
It could connect just a few days before, same laptop, same drivers (LG mobile united drivers)
Have tried it with 3 different laptops, still can't connect (drivers are installed)
A google search reveals other people having the problem as well and unable to solve it.
Can't return it yet for warranty because superuser app is still there.
Originally, I rooted it using superoneclick. Can't unroot it in superoneclick since not detected in USB.
So i unrooted it using z4root (without a pc). It's now unrooted, however superuser app is still in the app drawer.
Any advice?
Hi, I have the same problem and I posted question here: http://forum.xda-developers.com/showthread.php?t=1274379
Maybe some answers can help You but in my case nothing helped until one day it suddenly started to work again.
Well it was working both on my home and business laptop until few days ago when it stopped. I can+t make it to work again, and I've tried last advice there to remove battery for about 20 min.
I think problem is in the phone, because one day when it started ti work again on my business laptop it was also working on my home laptop without any action taken.
Please help!
P.S. I can hope that when GB will be available through OTA (I can't count on update tools because my phone is not detected), it will solve the problem
Thanks. Will try those suggestions. Not sure if i can update to gingerbread OTA. Theres no OTA update in my menu.
Hi,
I have the same problem as well. Nothing shows up in Device Manager, no notification when I plug in the phone. Just charging.
It was working just fine right out of the box, even before I installed any LG drivers, but it's suddenly just stopped being detected by the computer. Mass storage only or usb debugging makes no difference.
The problem is not with any of my USB ports, as other devices work just fine when plugged in (my iPod pops right up in Device Manager). I've reset the phone to factory stats, tried with other computers, downloaded the most recent drivers as well as the LG Mobile Support Tool.
I've googled extensively, only to find that a lot of other people have the same problem, but no working solutions.
I appreciate any and all suggestions.
Same issue.
Even on cwm and i can't make software update (power + vol- = reboot loop).
So i use adb tcpip...
I think i should try a stock/modaco before send it to after sales service
Thanks michoux.
Can you point me to instructions on flashing via adb tcpip?
edit:
Just did some googling. it seems device needs to be rooted for adb via tcp ip to work right?
Unless there's a way to root without pc then I can't do anything. (z4root doesn't work).
Damn, first mistake i did was to unroot.
do you already have installed the driver?? if already install remove it first and then reinstall the driver
check out this link maybe can help
Code:
http://forum.xda-developers.com/showthread.php?t=1304934&page=2
MODERATOR MESSAGE
A similar thread is open here http://forum.xda-developers.com/showthread.php?t=1274379
THREAD CLOSED!
I just wanted to relay my experience for anyone who might run across the same problem. There are so many solutions (some good, some bad) that I thought I'd try and help someone else out that was in one of these situations. Keep in mind, the solutions are all here at XDA, I just had to dig and try a few things.
This Captivate was on a Ginger Clone rom (2.2) from about a year ago and I wanted to go to Cyanogenmod. I personally run Cyanogenmod7 (181), and was trying to replicate that.
[Boot-Loop]
I Attempted to clear caches and go straight to Cyanogenmod. This may have been an inexperienced guess that I might be able to do this, but I know a few other folks that manage to do this. I ended up in a boot loop
[Getting to Download mode]
Can be frustrating, but seems to be if you have the usb unplugged, battery out, sim out, put the sim in, battery in, usb in (phone will turn on, so you have to move fairly quickly) and then hit the up and down volume buttons it will go into download mode.
[Go back to Factory]
I tried using the Odin 1 click solution. I believe there are more than 1 versions of this, but it would just get stuck at "Do not turn off target". I decided to try something else. The Java based Hemidal 1.3 aka "SamsungCaptivate-SGHi897-UCKB2-Rooted-One-Click.jar" seems like it is very well written and very easy. It has you update a driver in the mix and it works fantastically.
[Now I'm at Stock 2.2, rooted]
Need to turn on USB debugging, and I was expecting to be able to put
on the rom manager by copying over a file, naming it update.zip but it won't run due to some signing restriction.
[Unable to run any scripts or update.zip]
http://forum.xda-developers.com/showthread.php?t=833423
Basically, you need to turn off signing
[Went off the tracks, bricked the phone]
I decided I would try and apply the Cyanogenmod rom a different way. I went to their wiki and tried to use their Hemidal 1.1.1 update suite and script. I ended up with a brick. I didn't panic, I used the below url and it worked to get me back into download mode. I then used the previously successful Hemidal one click to fix it.
http://www.traemcneely.com/2011/05/...e-possibly-vibrant-kernel-error-black-screen/
I went back to the 3e recovery installer, ran that script, it worked and let me run unsigned code, I installed rom manager via update.zip, and from rom manager I was able to apply Cyanodenmod 7-v181 and then the Google apps and I was happy. Took about 2 1/2 hours to go through all that. Kind-of a pain... happy now.
Rich
Wish I had your kind of luck
I have a Captivate that isn't "bricked" per say but when I plug it into my computer when it's in download mode I only ever get "unknown device". Forcing a driver install causes a code 10 which makes it unusable as well. I have tried 4 different cables and 3 different computers now and tried all of the USB ports on each of the computers I tried at and always get unknown device even with the correct drivers installed. The 3 button trick doesn't work to put it in download mode but using a jig does. I have tried every operating system combo as well heimdall in OSX and Linux says no device connected, and in Windows 7 32 bit and 64 bit I get the unknown device error, also tried Windows XP and get the same error. I have tried 4 different usb cables now as well in each situation with the same unkown device/no device connected error (2 motorola cables, 1 samsung oem cable, and one no-name cable). I was going to gift this to my Dad because he's been missing Android since he gave his HD2 away and went back to a Blackberry.