It's pretty annoying how the exposure changes depending on what the camera is focused on. I can't even take a picture of inside my house in the day time because I have windows causing backlight everywhere. Are there any tweaks or anything that I can do to disable this?
Related
I was wondering if there was any sort of camera driver for download yet, ive been looking all over the site and have yet to find one, and ive looked throughout the internet for one, but Im finding old websites not updated since january....pleeease anybody?
Is this what you are looking for?
http://forum.xda-developers.com/showthread.php?t=355587&highlight=camera
that version is still slow videorendering...
Thanks, it seemed to help out alot in brighter areas but the dark places are still slow... its no problem to me ill just use a dig camera if I need a dark pic... thank you =D
A trick I picked up here with the "new" driver was to turn the camera on. After it comes up, press the power button to put the phone in "sleep" mode. Hold your hand over the camera lens, wake up the phone with the power button, wait 5 seconds and see if the frame rate is a little faster. Goofy trick, but it seems to work.
p51d007 said:
A trick I picked up here with the "new" driver was to turn the camera on. After it comes up, press the power button to put the phone in "sleep" mode. Hold your hand over the camera lens, wake up the phone with the power button, wait 5 seconds and see if the frame rate is a little faster. Goofy trick, but it seems to work.
Click to expand...
Click to collapse
i found this trick a long while ago. it does seem to work but i dont think it has anything to do with the htc-ca or omnia drivers so even if you dont have them installed, it will work.
I'm using the Laurentius26 V10 ( http://forum.xda-developers.com/showthread.php?t=416278 ) cooked ROM with the HTCA drivers ( see http://www.htcclassaction.org ) and the camera is performing extremely well. There is no evidence of any lag when there is sufficient light available, it seems to still take a performance hit when it has to compensate.
Rob
ps. that trick that p51d007 suggested is completely bizarre! Even the lag with close up or darkness goes away.
i am using the hyperdragon iiir lite rom with the (recomended) radio 1.65.24.36
and the omnia 3d driver installed in it
and video acceleration is perfect!!
a small improovement i have see also in camera
From my point of view... the camera gets SLOW whenever it has to increase exposure to compensate for the dark areas. The power button somehow fixes te exposure... or disables it.
Point is.. although being 3.0 MP...camera quality is nothing like a 3.0 real photographic camera. So... my question is...
Would picture quality get that worse... if the camera would always shoot with a fixed (lets say 1.0) exposure... and then increase the brightness of the picture via software ?
And to be REALLY bold... and please realize that i'm sugesting with virtually or really NO KNOWLEDGE ... 3D graphics can have its gamma controled... at least in a normal computer... how about showing the camera image on a D3D or OGLES texture... and increasing it "exposure" via gamma control ?
(Am i nuts?)
Yeah that trick works, but the picture is darker and a lot grainier. Also if you point the camera to a bright light source, it "resets" and then when you point at dark areas again, it lags. That trick seems to "initalize" the camera to a dark setting, for lack of a better phrase.
hambola said:
Yeah that trick works, but the picture is darker and a lot grainier. Also if you point the camera to a bright light source, it "resets" and then when you point at dark areas again, it lags. That trick seems to "initalize" the camera to a dark setting, for lack of a better phrase.
Click to expand...
Click to collapse
Damn, you're right, it resets when you point it at a bright source...I was all excited for a minute, too...
I wonder if there is a way to make the camera behave that way all the time? I snapped a picture with the trick active and it came out pretty good.
Here's my question, is there a way, to make the camera flash to use the normal light, and not the bright, when taking a picture, but in the same time, if a select it, to use the bright. It'll be usefull, because the bright flash makes things blurry or too bright when shooting from a close distance. If a want to take a picture of a business card (for OCR) I have to use separate light source, because the flash is too bright and makes it unreadable, and the normal flash is enaugh for the purpouse.
I too was interested in this idea about a month back. It would be very useful to take the photo with the standard flash light rather than the super bright flash. As it is this level that you focus the photo and expect it to be at, only to sadly recieve a horribly over flashed photo.
agreed...^^
What would really be awesome with the camera would be the ability to disable the light sensor. That way, in low light the FPS doesnt go to crap leaving us with blurry pictures. Also, the flash doing what a real flash does, being flash instead of stay on...
As for the normal light and not bright, hTorch has a toggle to go between both, we just need to see if there is a reg key or something to just enable the light without it going to bright mode for the actual shot.
There are a few other threads that talk about the camera reg settings, i just forget where.
Hi,
Almost every camera in the world has a halfway-click that focuses, measures the light and then takes the picture when you press the shutter button all the way.
On other phones (iPhone), where there isn't a halfway -setting, this is done by taking the picture when the user releases the button, which gives much greater control over exactly when the picture is taken.
Do you know of any program (camerazoom, snapshotpro etc?) that works this way? The stock camera app doesn't and it's quite detrimental to the quality of pictures you can take.
This means the camera needs to auto focus when I press the trackball button down and then take the picture within a split second when I let go of the button, since it no longer needs to measure light or focus. I would really love this feature.
Hi ,
Go to my thread http://forum.xda-developers.com/showthread.php?t=551904 the program I mentioned has this option also .
Thanks! Will check it out!
There is a workaround that i use that is effective on my mT3G. I turn auto focus off. That makes the camera focus at infinity. With these tiny lenses, infinity can start at less than three feet. So anything farther away than that is in focus if you turn off auto focus. I use SnapPhoto Pro to turn off the autofocus.
If you use SnapPhoto Pro autofocus, you touch the screen to focus and let go to take the photo. That works well. It also has a continuous focus feature which works very well but drains the battery.
Hi there!
First my question - Is there a way to prevent the Note 8 from entering the RED area of the screen brightness slider when in Auto Brightness mode?
Now my reasons for this question, should you care of course
I am a quite devoted Pokemon Go player for over a year now, which has lead to a significant screen burn-in on my previous S7 Edge. Now with Note 8 I am more careful in how I play the game. I have started by making the game run is immersive mode, I tend to deliberately switch between apps to prevent same game elements stay on for too long and finally, I am using the phone with the screen as dim, as possible without causing me difficulties to see it.
HOWEVER, I would like to use Auto Brightness as it actually learns my preferences quite well with one exception - whenever it sees a direct sun beam, it automatically boosts into the red zone, even is the bright light has been there for a second. OK, I admit that the screen brightness is amazing in direct sunlight, staying saturated and crisp and also the system's reaction to a spray of bright light is really fast, except for the fact that...I don't want it.
It's not about saving my battery, I have a 20 000 mAh battery pack always with me. I only want to prevent my screen from burn in and overall degrading faster than normally.
Thanks
I'd like to know this as well.
Same!
i suppose there is memory function, when u drag the slider back to the illumination level of ur choice, it remembers the next time and limits the brightness. some amount of patience is needed till the system 'learns'
snakez23 said:
i suppose there is memory function, when u drag the slider back to the illumination level of ur choice, it remembers the next time and limits the brightness. some amount of patience is needed till the system 'learns'
Click to expand...
Click to collapse
Yes indeed, some time is needed for the system to fully learn the preferences
I am experiencing automatic dimming of my screen when set to maximum. The big thing is Adaptative Brightness is Off. I also set Power Mode to High Performance to make sure power management would not dim. I even bought an app that supposedly cranck up brightness beyond system limits (did not work)
I first noticed this when taking pictures of my garden in bright daylight, the screen was dim and even going over the orange marker on the dial I still struggled to view the screen (sun was almost 90 degree angle).
However when I placed my hand over the screen I could see well but then I noticed a sensible dim. At first I thought it was some king of optical trick, so I tried to repeat the experiment in different conditions to the point that I would simply crank up brightness and have a strong light over my phone then I used a black sheet of paper just above sensors. If I take the sheet off the brightness ramp up a bit, if I put the sheet over the screen dims. And again no auto Adaptative Brightness is turned on neither Power Mode in save.
I guess this wasn't supposed to happen, if I want to ramp up brightness as much as I want I should be allowed and the system should not interfere with my preference? I don't need to justify my use to anyone but as a courtesy to those that are inclined to help me, here it is: I work a lot with gardening and construction all day, including strong daylight, and I need to take a lot of pictures for my work.
What can I do to squeeze this bit more brightness from my Note 9?
Thanks a lot.
felcas said:
I am experiencing automatic dimming of my screen when set to maximum. The big thing is Adaptative Brightness is Off. I also set Power Mode to High Performance to make sure power management would not dim. I even bought an app that supposedly cranck up brightness beyond system limits (did not work)
I first noticed this when taking pictures of my garden in bright daylight, the screen was dim and even going over the orange marker on the dial I still struggled to view the screen (sun was almost 90 degree angle).
However when I placed my hand over the screen I could see well but then I noticed a sensible dim. At first I thought it was some king of optical trick, so I tried to repeat the experiment in different conditions to the point that I would simply crank up brightness and have a strong light over my phone then I used a black sheet of paper just above sensors. If I take the sheet off the brightness ramp up a bit, if I put the sheet over the screen dims. And again no auto Adaptative Brightness is turned on neither Power Mode in save.
I guess this wasn't supposed to happen, if I want to ramp up brightness as much as I want I should be allowed and the system should not interfere with my preference? I don't need to justify my use to anyone but as a courtesy to those that are inclined to help me, here it is: I work a lot with gardening and construction all day, including strong daylight, and I need to take a lot of pictures for my work.
What can I do to squeeze this bit more brightness from my Note 9?
Thanks a lot.
Click to expand...
Click to collapse
Try the the twilight blue app filter. It works wonders with the bulb features on your phone
jd14771 said:
Do you have a screen protector? Could something be obstructing the sensor on top?
Click to expand...
Click to collapse
no screen protection at all