Database Develop

[TWEAKS] Script for Speed/Battery/IO Scheduler and Governor changer

Hi everybody!
I've compiled a script with a few tweaks based on knzo post
This works on CM7, should work on stock also!
I've also added to the script a few lines to change the IO Scheduler and governor. You just have to edit the attachment (unzip it first ) and remove the "#" before the line you want to apply (I've just add the lines depending if you have CM7's stock kernel or huexxx kernel, but you can edit for any kernel, you just have to edit for the governor/io schedulers available or just leave that lines commented).
# change Governor
# Huexxx's kernel
# echo interactivex > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor;
# change IO Scheduler
# CM7's kernel
# echo "noop" > /sys/block/mmcblk0/queue/scheduler;
# Huexxx's kernel
# echo "sio" > /sys/block/mmcblk0/queue/scheduler;
.....​
After this, do this steps:
1 - Install SManager
2 - Open SManager and go to the script, I put it in /data/script
3 - Single click the script "74diogo" and check "Su" and "Boot" and then save.
4 - Just reboot.
Note: It could take a minute or two to change the governor in Cyanogenmod settings.
That is it!
Feel free to leave to give your feedback

By the way... When I changed the default governor via CM settings and applied at boot, the phone becomes very slow in the first minute after boot...
Changing the governor with this script, that slow performance disappears

Also, you can activate JIT, use 16 bit transparency and disable scrolling cache (force disable) for a little speed and smooth...

I get a lot of not found errors is that normal? And also a lot of permission denied.

a_alex_1993 said:
I get a lot of not found errors is that normal? And also a lot of permission denied.
Click to expand...
Click to collapse
Yeah. You should choose the option "boot" and "su" and reboot. The settings will apply.
You can't change some values while the system is running... that is why there are those errors.

Thank you for your help. I get it now. But can we use a other scripts like v6supercharger and should we expect any improvements from them if we already have this script?

a_alex_1993 said:
Thank you for your help. I get it now. But can we use a other scripts like v6supercharger and should we expect any improvements from them if we already have this script?
Click to expand...
Click to collapse
Yeah, it is possible. v6supercharger could change some values that this script change. Try both

I guess both at the same time won't work right?

a_alex_1993 said:
I guess both at the same time won't work right?
Click to expand...
Click to collapse
It should work. I don't see why not
Did you notice any difference using my script?

I did actually, Cm7 was already pretty smooth but at boot up after the script manager gets root permission it loads a lot faster than before, by this I mean that the starting lag lasts a lot less. As for general use it works great but it also worked great before so I can't really tell. I noticed an improved battery performance too.
So all in all it's great

a_alex_1993 said:
I did actually, Cm7 was already pretty smooth but at boot up after the script manager gets root permission it loads a lot faster than before, by this I mean that the starting lag lasts a lot less. As for general use it works great but it also worked great before so I can't really tell. I noticed an improved battery performance too.
So all in all it's great
Click to expand...
Click to collapse
That is great!

Topic is missleadinng.

dflt said:
Topic is missleadinng.
Click to expand...
Click to collapse
Why? Do you have any suggestion?

You can push that values in a file an add them to init.d folder and by this way removing the use of script manager. My two cents.
FDN

re4lsk said:
You can push that values in a file an add them to init.d folder and by this way removing the use of script manager. My two cents.
FDN
Click to expand...
Click to collapse
I tried that and it didn't work... at least in CM7

dcop7 said:
I tried that and it didn't work... at least in CM7
Click to expand...
Click to collapse
did you changed the permissions?

re4lsk said:
did you changed the permissions?
Click to expand...
Click to collapse
Yeah, or maybe I did something wrong. Did you manage to do that?

Works on Zeus 6.28n ?'
Sent from my LG-P970 using xda premium. If I Helped You Hit The Thank Boutton. Jizzz

Cedlad said:
Works on Zeus 6.28n ?'
Sent from my LG-P970 using xda premium. If I Helped You Hit The Thank Boutton. Jizzz
Click to expand...
Click to collapse
I should work!
Just have to edit (or don't use) the lines to change the governor and IO scheduler.
To edit, just put the name of the desired (and available) governor and IO Scheduler

MiniCM10 questions

Hi guys, I've just installed miniCM 4.0.2 on my friend's x8: this is great, you've made this old 2.2 crap run like hell! I really want to thank all devs for this great job. And I have 4 questions:
- In future releases will kernel be updated via MiniCM Updater or there'll always need to flash tft via flastool?
- Is there a way to flash new kernels with cwm and/or without a PC/mac?
- Reboot issues on 4.0.2 stable can depend on kernel?
- Are these just ram/too many bkgrd procs issues that I can solve using a mount partition?

Kernels cant be flashed via our phone presently...(it might be possible in the future)
sent from my phone using hands and brain...
---------- Post added at 04:44 PM ---------- Previous post was at 04:42 PM ----------
Also for other doubts you can post them in the minicm q&a thread or have a chat with them on irc.
I dint use minicm10 so cant help you presently...
sent from my phone using hands and brain...

no,no,no(oxoydo is same as naajb),maybe(dont use too much apps)
Sent from my E15i using xda app-developers app

Thanks I'll post there for minicm specific.
For now I'll stick with flash tool... Hope to see an integrated solution soon.

If you want a fast, stable, NO LAGS and NO reboots...
Do what I did.
I tested minicm for a month now.
Best solution for me is:
1. SWAP 128mb with swappiness 60
2. KSM on
3.Purging assets on
4. Zram off (zram for some reason, lags and crashes my system)
5. Limit backround processes to 4
6. Force 2d rendering on
7.Disable HW overlays on
8. OC to 748 mhz with smartass 2
9. surface improvement ONLY color banding (without blur effect)
10. 16 bit transaprency
11. Entropy seeder
12. A2SD with dalvik cache on sd
13. Sd cache --> 512 kbs
My antutu score is 3911
Best so far...

razgoth said:
Hello, on MiniCM10 (nightly - 31.12.2012) I have got 3924 points with similar configuration with some differences:
- 256 MB swap partition (swappiness 60);
- OC 768 MHz with Smartass v2 and undervolted;
- SD cache default (not changed).
Like above, no lags and reboots. Very fast.
Click to expand...
Click to collapse
how change swap size? And sd?

pauleee said:
how change swap size? And sd?
Click to expand...
Click to collapse
Better to use swap partition (create via pc "minitool partition home edition")
-swap partition is faster than swap file(a little bit)
-swappiness above 40~60 can decrease sdcard life.
-if u use swap so disable compcache in cyanogen settings(speeds up & make phone responsible.
-overclock more than 729mhz can harm our chipset
Sent from my ULTIMATE using Tapatalk 2

jay-z-s said:
-swappiness above 40~60 can decrease sdcard life.
Click to expand...
Click to collapse
what is 40~60?
it % ?

pauleee said:
what is 40~60?
it % ?
Click to expand...
Click to collapse
Yes percentage
For kernel Swappiness 100 means : no difference between ram & swap partition , so whole system will slow down
For kernel Swappiness 0 means : swap partition should not be used at all!
#higher swappiness means more active swap( effects SD life)
#app swapper2 is a good option to controll swap!
Sent from my ULTIMATE using Tapatalk 2

gocegi said:
If you want a fast, stable, NO LAGS and NO reboots...
Do what I did.
I tested minicm for a month now.
Best solution for me is:
1. SWAP 128mb with swappiness 60
2. KSM on
3.Purging assets on
4. Zram off (zram for some reason, lags and crashes my system)
5. Limit backround processes to 4
6. Force 2d rendering on
7.Disable HW overlays on
8. OC to 748 mhz with smartass 2
9. surface improvement ONLY color banding (without blur effect)
10. 16 bit transaprency
11. Entropy seeder
12. A2SD with dalvik cache on sd
13. Sd cache --> 512 kbs
My antutu score is 3911
Best so far...
Click to expand...
Click to collapse
Where do I set all these settings?
Is it all under performance section? Can't find all of them there.
Thanks for info anyway I'll try it out for shure.
Btw: is it a class 6 microSD enough? Tested with ubuntu is 5.7 mb/s writing and 19.8 mb/s reading

razgoth said:
Numbers 5,6 and 7 are in the Developers Settings or something called like that (in the System Settings). 5 and 7 you have to check after every reboot.
Number 13 You can use via third party apps (for example SD Speed Increase).
Number 11 at http://forum.xda-developers.com/showthread.php?t=1987032 and http://forum.xda-developers.com/showthread.php?t=2009217.
Swap and a2sd are native functions of ROM/kernel (numbers 1 and 12).
MicroSD class 6 is absolutely minimum for Swap, but it should works.
Click to expand...
Click to collapse
1. SWAP 128mb with swappiness 60
--- I had a 256 Mb swap partition but I haven't set any swappiness (where to set it BTW?)
2. KSM on
-- ok
3.Purging assets on
-- ok
4. Zram off (zram for some reason, lags and crashes my system)
-- ok
5. Limit backround processes to 4
-- left it default 'cause it's annoying to check every reboot
6. Force 2d rendering on
-- ok
7.Disable HW overlays on
-- left it off 'cause it's annoying to check every reboot
8. OC to 748 mhz with smartass 2
-- OC and UV just freeze my phone and forced reboots, so I left values to default.
9. surface improvement ONLY color banding (without blur effect)
-- ok
10. 16 bit transaprency
-- ok (default)
11. Entropy seeder
-- used this (new installation method) http://forum.xda-developers.com/showpost.php?p=36235699&postcount=462 and this was a real treat: this is by far the best improvement in performance ever (OC is nothing compared to this)
12. A2SD with dalvik cache on sd
-- dc2sd is working ok
13. Sd cache --> 512 kbs
-- the app permitted a minimum of 1024 as 1st step so I went for it and set on boot: ok
thanks for suggestions razgoth... especially entropy seeder (great)
can you tell me just one thing more: where to set swappiness?
I'll upgrade to a class10 sd asap, but for the moment is more than ok (coming from 2.1 stock **** now seems flying)

Your experiences with cocore8 and v6supercharger

Hey xda-community .
I'm new in rooting and have some questions ^^.
I have a S Advance i9070 (with JellyMod4) and want to know your experiences with the v6supercharger and cocore8.
Btw: is setcpu needed or is the script and cocore doing all it self ?
(And did someone got the aosp browser from 4.3 on the i9070 to work ?)
Greets, misterNewbee
Sent from my GT-I9070 using xda app-developers app

MisterNewbee said:
Hey xda-community .
I'm new in rooting and have some questions ^^.
I have a S Advance i9070 (with JellyMod4) and want to know your experiences with the v6supercharger and cocore8.
Btw: is setcpu needed or is the script and cocore doing all it self ?
(And did someone got the aosp browser from 4.3 on the i9070 to work ?)
Greets, misterNewbee
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I advice to you to flash harsh jelly 3.0 with cocore. Performance are awesome
You have to use set cpu or nofrills when you want to change the governors and I/O scheduler, if not, don't use them
For the browser..I think not

maurus1998 said:
I advice to you to flash harsh jelly 3.0 with cocore. Performance are awesome
You have to use set cpu or nofrills when you want to change the governors and I/O scheduler, if not, don't use them
For the browser..I think not
Click to expand...
Click to collapse
I remind to read somewhere that it is only possible to change the frequences with adb or terminal. Is this true or is it possible to change it with apps like setcpu (or no-frills) ?
And what does the harshjelly tweaker do ?
(How to understand tweaks ? :/)
Thank you for the answers :thumbup:

MisterNewbee said:
I remind to read somewhere that it is only possible to change the frequences with adb or terminal. Is this true or is it possible to change it with apps like setcpu or no-frills ?
To the governors and i/o sheduler, can you recommend me some ?
And what does the harshjelly tweaker do ?
(How to understand tweaks ? :/)
Thank you for the answers :thumbup:
Click to expand...
Click to collapse
Yes with set cpu you can only change gov and io and I prefer using pegasusq and sio as scheduler.
Harsh tweaker is an app that has some tweaks like disable or enable the crt effect, to enable or disable cache scrolling, enable logging, enable 360º rotation,enable the long press to kill and other tweaking
There is always in harsh jelly a command that you can write in the terminal emulator (typing harsh_controls) that can do some very useful things like zipalingn all the apps, vacuum and reindex you databases (it makes your phone less 'dirty' and so it makes the acces in the databases faster) ,enable or disable fsync (fsync off can improve performance but you ll have data loss if power goes out suddently, recomend to turn it on) and other little commands
Mr.harsh has done a very great work making this rom! Let's try it
Press thanks botton if i helped you:beer:
Inviato dal mio GT-I9070 con Tapatalk 2

MisterNewbee said:
I remind to read somewhere that it is only possible to change the frequences with adb or terminal. Is this true or is it possible to change it with apps like setcpu (or no-frills) ?
Click to expand...
Click to collapse
for me,i set the cpu using script.. load it at boot using script manager..

lawong said:
for me,i set the cpu using script.. load it at boot using script manager..
Click to expand...
Click to collapse
Good to know that this is possible too ;D. Are in the i9070 forum some scripts or have i to make them myself ? And do someone use the v6 supercharger script ?
Sent from my GT-I9070 using xda app-developers app

MisterNewbee said:
Good to know that this is possible too ;D. Are in the i9070 forum some scripts or have i to make them myself ? And do someone use the v6 supercharger script ?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
use the below script to
#to change the scheduler
echo "sio" > /sys/block/mmcblk0/queue/scheduler
#to change the governor
echo "ondemandq" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
don't use windows text editor like text pad.. insted use use notepad++ and the file should have no extension.
Create a new folder named 'init.d' in /system/etc
then push the file using a root explorere to the folder
Set the permission of init.d foler and the script file to 0777(rwxrwxrwx)
u can also search the forum for other commands which can be used to tweak the governor like the scaling frequency and other stuff
check http://forum.xda-developers.com/showthread.php?t=2198510

Butterfly S- GPU OC Stuck At 320MHz

cpu overclock auto restore to default
Im currently using GP's kernel 1.2.4 but when i oc cpu to 2.1ghz auto restore to 1,13ghz and the gpu oc is stuck at 320mhz it cant oc. Help me !
P/s : sorry for my english

What program for overclocking do you use?

danghuynh2001 said:
Im currently using GP's kernel 1.2.4 but when i oc cpu to 2.1ghz auto restore to 1,13ghz and the gpu oc is stuck at 320mhz it cant oc. Help me !
P/s : sorry for my english
Click to expand...
Click to collapse
You don't need any software, just add the following lines to one of your init.d scripts
Code:
echo 585000000 > /sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/max_gpuclk;
chmod 444 /sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/max_gpuclk;
for max performances.
Reference to CPU OverClock install 1.2.5, I removed HTC Perflock, set the values with SetCPU, they will be kept.
Slán!

foggydew88 said:
You don't need any software, just add the following lines to one of your init.d scripts
Code:
echo 585000000 > /sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/max_gpuclk;
chmod 444 /sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/max_gpuclk;
for max performances.
Reference to CPU OverClock install 1.2.5, I removed HTC Perflock, set the values with SetCPU, they will be kept.
Slán!
Click to expand...
Click to collapse
Hi, I'm also using your kernel 1.2.5 and Trickster Mod app to control it and I'm also face similar problem. The GPU OC is not stable, after every reboot it changes to 320 or 409. I do not want to set GPU to max freq all the time, I want to have an option to change it other way that editing init.d script every time. Is there any way you'll be so kind to come up with any other solution?

Singularitas said:
Hi, I'm also using your kernel 1.2.5 and Trickster Mod app to control it and I'm also face similar problem. The GPU OC is not stable, after every reboot it changes to 320 or 409. I do not want to set GPU to max freq all the time, I want to have an option to change it other way that editing init.d script every time. Is there any way you'll be so kind to come up with any other solution?
Click to expand...
Click to collapse
Any solution work in the same mode, they change that /sys value.
But if you use the "ondemand" governor it will change your current GPU clock frequency as your system need in that moment, you can set the max frequency and your phone will not always use it.

[CM 12.X/13.X/AOSP 5.X/6.X] Project Dark Booster

Source : http://forum.xda-developers.com/android/software-hacking/tweak-arkaynine-boost-script-v3-0-t3120404
Features -
>>> Performance boost script by @dark_optimistic
>>> Zipalign at each Boot for better performance
>>> Kernel Tweaks
>>> VM Tweaks
>>> PDB Profiler
>>> Multitasking, Balanced, Default & Gaming Profiles for Profiler
>>> Battery Tweaks
>>> SQ Lite Database Optimiser Tweaks
>>> Touch Pressure Adjustments
>>> I/O Tweaks
>>> New CPU Governor Tweaks
>>> SD Carf R/W Speed Tweaks
>>> Strict Minfree Tweaks
>>> Inbuilt Adblocker
>>> ABS Booster
>>> Sysctl.conf Tweaks For Kernel
>>> No Normalised Sleeper Tweaks
>>> Internet Speed Tweaks
>>> Fstrim Engine
>>> Enables Ditethering
>>> Improve video HW Decoder
>>> CPU Boost Scripts
>>> Lag reduction
>>> 60 FPS Unlocker
>>> Inbuilt Junk Cleaner
>>> Media Server Killer
>>> Faster Boot Tweaks
>>> Option To Disable Boot Animation For More Faster Boot
>>> Liquid Smooth UI
>>> Scrolling Speed Tweaks
>>> Flag Tuner by @DiamondBond
>>> Theme Engine For Terminal Menu (Thanks To @Paget96)
>>> In Call Speaker Quality Improvement Tweaks
>>> Various Build.prop Tweaks
>>> Increases Performance & Battery Life Drastically
>>> Increase scores in Benchmark Tests upto its best
>>> RAM Boost Scripts by @dark_optimistic
>>> Better HD Graphics rendering
>>> Smooth Gaming performance
>>> No Launcher withdraws
>>> Smooth & Lagfree Multitasking
>>> Enhances Graphics quality and Images output
>>> More Energy Efficient for long battery life
>>> Device Information
REQUIREMENTS
##Rooted Android Phone(Android 2.2+)
##Any Custom Recovery(CWM, TWRP, CTR, COT ,Philz)
##Kernel with init.d support
##Latest BusyBox Installed(Download From Play store)
##Terminal Emulator(Download From Play Store)
INSTALLATION
##Download Tweak and paste it in SD card.(To download check download section)
##Go to recovery
##Install zip from SD card
##Navigate to Zip & Flash it! (Do Not Wipe Anything)
##Now Reboot(First Boot Can Take 1-2 Minutes)
Inform me about AOSP ROMS
Hit thanks if you like my share
My preferance after installation of evrything :
Install busybox and install it from inside install terminal emulator and flash attached file and supersu 2.67 beta from official supersu site
Go to terminal type su
Type : ABS
Type : 2 ( PDB Zone)
type : 6 - and choose multitasking
Go back to main menu and enable 8-16 evrything again come back to main menu
Type : 5 ( build.prop tweaks ) enable evrything except 13 th ( boot time something)
Reebot device see the diffrence
SUPERSU ATTACHED IF YOU HAVE ROOT PERMISSIONS PROBLEM (WORKING WITH 6.0.1 CM/AOSP)
HIT THANKS IF YOU LIKE MY SHARE

Not working on CM13
I have done every process which you mentioned above.
H/W decoder not working..
Signal Tweak not working..
I don't see any changes in ROM.
Busybox v1.24.1 installed,SuperSU v2.67 installed

Koushik770056 said:
Not working on CM13
I have done every process which you mentioned above.
H/W decoder not working..
Signal Tweak not working..
I don't see any changes in ROM.
Busybox v1.24.1 installed,SuperSU v2.67 installed
Click to expand...
Click to collapse
It is for performance and smoothness just enable it

working good at CM 12.1 ..thank you brother

ramisuper said:
working good at CM 12.1 ..thank you brother
Click to expand...
Click to collapse
Thanks for your concern ?

Anybody tried it on aosp 6.0.1?

Hi hardik90 , Its working on AOSP 6.0.1 , No issues after 24 hours and battery darning also seemed to be resolved , thank you and good work.

Mj2789 said:
Anybody tried it on aosp 6.0.1?
Click to expand...
Click to collapse
Its working on AOSP as said by @jrkraj

jrkraj said:
Hi hardik90 , Its working on AOSP 6.0.1 , No issues after 24 hours and battery darning also seemed to be resolved , thank you and good work.
Click to expand...
Click to collapse
Thanks for checking it on AOSP

why is the 2nd. Attached file required

Should i also flash the 2nd attachment

nprajwal248 said:
Should i also flash the 2nd attachment
Click to expand...
Click to collapse
The 2nd attachment. Was a Uninstaller
Phone's performence surely improved. So thanks

nprajwal248 said:
why is the 2nd. Attached file required
Click to expand...
Click to collapse
If anything goes wrong it will uninstall the mod

nprajwal248 said:
why is the 2nd. Attached file required
Click to expand...
Click to collapse
that file is optional...In case if you want to uninstall this mod from ur mobile just flash that 2nd file

need for speed most wonted won't working good view in game menu but inside game very dark view
so i install that to improve
>>> Better HD Graphics rendering
>>> Smooth Gaming performance
but nothing changes
i'm on 6.0.1 rom
thanks for share

ehab.ali said:
need for speed most wonted won't working good view in game menu but inside game very dark view
so i install that to improve
>>> Better HD Graphics rendering
>>> Smooth Gaming performance
but nothing changes
i'm on 6.0.1 rom
thanks for share
Click to expand...
Click to collapse
DO A BACKUP OF TOUR ROM .
flash pure graphic see if its working . it should because its was working on lolipop 5.1 too i havent tested on 6.0 i dknt play games anymore.
Install the both apk's and configure Xtreme boost as Hard gaming while playjng games . and game booster as Ulta (insane fps fetcher)
Wehn u finish plating disable gamebooster and activate default in xtreme booster

hardik190 said:
DO A BACKUP OF TOUR ROM .
flash pure graphic see if its working . it should because its was working on lolipop 5.1 too i havent tested on 6.0 i dknt play games anymore.
Install the both apk's and configure Xtreme boost as Hard gaming while playjng games . and game booster as Ulta (insane fps fetcher)
Wehn u finish plating disable gamebooster and activate default in xtreme booster
Click to expand...
Click to collapse
ok i'll try but one question what is our device gt-i9082 gpu type
mali, adreno, tegra, powervr

ehab.ali said:
ok i'll try but one question what is our device gt-i9082 gpu type
mali, adreno, tegra, powervr
Click to expand...
Click to collapse
I use mega 5.8 but have a lot of work on grand . flash it i t supports games of all gpu
Sent from my GT-I9152 using Tapatalk

hardik190 said:
I use mega 5.8 but have a lot of work on grand . flash it i t supports games of all gpu
Sent from my GT-I9152 using Tapatalk
Click to expand...
Click to collapse
when downloading games data files what should i choose for our device
adreno
tegra
mali
powervr

ehab.ali said:
when downloading games data files what should i choose for our device
adreno
tegra
mali
powervr
Click to expand...
Click to collapse
powervr..I guess