Hello
after some flashing i got and had to reinstall KK9 via Odin from the PC, now i'm on KL7 with root but i get everytime this error-messages:
logo_q1 draw failed
when im charging the note i get the message: charging_q1 draw failed.
how can i repair this?
The Charging_q1 should be the battery-picture which tells me that my Gnote is charging an the logo_q1 should be the Text which comes before the Samsung Boot Animation.
May it be possible to push the files back with adb?
Regards
Seelbreaker
same problems here. anyone can help us?
Did you use TriangleAway? Some who used it got the same issue (including me)
There is a "possible" solution in TriangleAway thread but it did not work for me, try it and see if it works for you
Related
Hello Guys
I have a challenging, near brick case.
I have an SGS I9000 I bought from a provider in Singapore. I had a row of misfortune with this device and it was DOA with receiver problem. It was sent twice to Samsung labs and eventually they replaced most of its internals.
When the device eventually returned from the labs it had a 2.1 ROM version of the local provider (IDEA) that was locked for the 3-button maneuver.
I have read all that was written about it, decided to get a decent JIG that work like magic and bring me easily back to DOWNLOAD mode. I decided to install an alternative ROM of my country that had a clear good installation instructions: PilotX 3.0. When this did not work I tired several others, all from ODIN only. In general what happens:
1) After the ODIN restarts the application the ROM goes up and gets stuck after the S opening screen. The device stays black with buttons light on and vibrates every few secs.
2) After the ODIN reset there are messages on the external environment that says E: cant mound /dev/block1st/st110 or 111 (invalid argument)
or: copy dbdata_media cant mound ... copy media content failed
3) I did manage to get to recovery mode despite the errors from the ODIN installation and managed to install from SD card ZIP files the PilotX ROM. It did not give any error messages but it got stuck the eventually the same way.
4) The only ROM I managed to install and actually get running was the local ORANGE ROM. This too did not recognize my SIM and did not solve the 3-button issue.
I am now with a semi bricked device, luckily returning to Download mode easily thanks to the JIG.
Any suggestions guys ?
Thanks
B
You need to flash a full rom in Odin (one with 3 files) and repartition checked. I normally use xxjpc for this purpose.
Sent from my GT-I9000 using XDA App
update
I managed to intall an ACLAIR 2.1 ROM with ODIN that actually works.
I think using a proper PIT did the trick. not sure.
Still:
1) I did get to see that when rebooting there was still a red error message saying something like: "can not access system syn ...."
2) I am still stuck with a phone that refuses to do the 3-button Recovery maneuver.
I guess I am back to square one, searching on the 3-button fix threads for a proper solution. Any good suggestions or boosts. I am after a sleepless night
Thanks
hi guys
IM using a Samsung Glaxy S Plus Gt-I9001.
I have only a little bit experience with android systems and tried to install PDroid or at least tried to solve the prequisites.
So after deodexing my data I put them via shell back and override the old files, just as told in tutorials thatfor.
My porblem is now, that i stuck in bootloop and odin stucks on "SetupConnections", because the download mode shows only its title screen, but I cannot acess by pressing volume up.
I have done a nandroid backup just after rooting it and stored it on my computer.
I hope anyone can help me.
meneken17
have a look here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
thankyou for your reply but nothing of it worked
I gave it back to the shop and hope for best =)
Hello guys,
I've bought a galaxy plus , it works perfectly at first but when I restart my samsung it goes directly to the standard setup again.
I tried fixing the boatloader using odin, but during the dowloading proces it stops. The phone says MBR read Failed I've tried the recovery clokward file and the custom I9001XXKQ1_I9001DBTKP1_DBT file.
I can't get into recovery mode.
At first i thought it was a software problem, but maybe it is the internal memory chip?
Does anyone know how to fix this problem, or has an answer?
hello
Di9001 said:
Hello guys,
I've bought a galaxy plus , it works perfectly at first but when I restart my samsung it goes directly to the standard setup again.
I tried fixing the boatloader using odin, but during the dowloading proces it stops. The phone says MBR read Failed I've tried the recovery clokward file and the custom I9001XXKQ1_I9001DBTKP1_DBT file.
I can't get into recovery mode.
At first i thought it was a software problem, but maybe it is the internal memory chip?
Does anyone know how to fix this problem, or has an answer?
Click to expand...
Click to collapse
hello, i have that same problem, i have no idea how to get out..... please tell me you are handled whit this
best
Hi,
I am sorry to post this topic but i badly need some experts to help me out with this. It would be very grateful if anyone of you could help me.
I have bricked my friend's samsung galaxy s i9000. Now i need to buy a new phone for her incase i dont get this one working.
I have searched on this forum and googled extensively, i tried almost every method on this forum to unbrick except the USB jig, all of them failed.
I have ordered USB jig online, and it is yet to be delivered to me. So that method is yet to be tested.
Meanwhile all i want now is some guidance, so that i could be self assured if what I am doing is right and i need some questions answered.
Please read the following to comprehend the entire problem.
1) The phone has froyo and it was working very slow, and i couldnt boot into download or recovery mode via 3 button combo. (why couldnt i boot into those modes?)
2) I connected the phone to samsung kies, and it said that there is an upgrade available. But the details for the upgrade were blank.
I went ahead and tried upgrading it, and it gave me 403 error. (why did it give null details of the upgrade firmware? and why did i get 403 forbidden access error? )
3) Next i connected to the phone via ADB, and i could successfully boot into download mode.
4) After booting into download mode, i connected it to odin. Then i tried flashing semaphore kernel v2.7.
I gave an error, write operation failed, and the flashing failed. (why did it happen?)
5) Next I couldnt boot the phone at all, I am stuck at the black screen of death aka bsod or the phone-!-computer screen.
6) I tried taking out battery, reinserting and tried severl combination of button to boot as explained at several places here, but none of them works. Neither am i able to connect it to odin, or adb.
WHAT SHOULD I DO NOW? IS IT HARD BRICKED OR SOFT BRICKED?
WHAT SHOULD I DO INCASE I AM ABLE TO BOOT INTO DOWNLOAD MODE USING USB JIG?
WHAT SHOULD I DO INCASE I AM NOT ABLE TO BOOT INTO DOWNLOAD MODE USING USB JIG?
Please help me, it will save me a new phone cost. I can hardly afford it.
http://forum.xda-developers.com/showthread.php?p=30415128 follow the link it may help
Sent from my GT-i9000 using xda premium
I have already tried all this.
can you answer my questions?
http://www.youtube.com/watch?v=1RoZU5ZPMS4&list=UUawwqTCK5egDfXdJe3EH0XQ&index=13
http://www.youtube.com/watch?v=pKS6zEkIydM&list=UUawwqTCK5egDfXdJe3EH0XQ&index=14
http://www.youtube.com/watch?v=PwHVm90HO1w&list=UUawwqTCK5egDfXdJe3EH0XQ&index=18
http://www.youtube.com/watch?v=6GJUcQl3wr8&list=UUawwqTCK5egDfXdJe3EH0XQ&index=16
if your still stuck check out darkyrom.firstaid
http://forum.xda-developers.com/showthread.php?t=819551 read this
a big thanks foe all above links..
I am still trying and waiting for the jig. i hope to get it working..
Was the phone rooted? I've had problems with rooted apps deleting system files.
Sent from my GT-S5830 using xda app-developers app
Hello guys,
First post here so, if it's in wrong session, sorry
I've tried to root and update my Samsung Galaxy Ace (GT-S5830C), apparently the root went fine but when I tried to add the ROM, I couldn't initialize anymore... well the screen lights up and the flash blinks once and I heard the turning on sound but it's not shown anything on the screen. Funny thing is that the Odin3-v1.85 recognizes when I plug my phone.
I've been trying to repair for 2 days now, but still couldn't find out one solution.
Please help me :crying:
Edit: I Figure out that I installed the wrong firmware... but I still couldn't install another
Go to the download mode and then install your Stock rom using ODIN. That should solve your problem.