Database Develop

please, help me switch sprint-diamond-6950 from MEID to ESN

my operator use huawei networks, and this system don't support MEID for EVDO registration.
i compare layes3 trace for both terminal, Sprint-Novatel-U727 and Sprint-HTC-Diamond-Touch.
and found problem in "Session Setup" phase.
when terminals send 1xEV Signaling Access Channel -- HardwareIDResponse:
Sprint-Novatel-U727 send hardware_id_type = 0x10000 + ESN - and network answer,
but Sprint-HTC-Diamond-Touch send hardware_id_type = 0xFFFF + MEID and network stop answer.
so, i think my operator don't support MEID, and need switch diamond from MEID to ESN.
i'm not programmer, but i looking for 7500 code, hdramp.c/hdramp.h
and found hdramp.session_info.session_hwid.type parameter
with HDRAMP_HARDWARE_ID_TYPE_ESN or HDRAMP_HARDWARE_ID_TYPE_MEID value.
i try sprint and telus radio, but always MEID.
also i use QXDM and set 1933 nv_hdramp_hardware_id_i parameter to 0x10000 (for ESN)
but always MEID in trace.
so, if anybody can do more, than looking for SPC, or change ESN/MEID and has any information - please help me.
i think need path firmware, it's easy at intel cpu, but for arm/qcom i haven't this skill, so, before try loking other way.
thanks.

bump
any update?
How do you do a layes3 trace ?
Does this help?
http://www.qualcomm.com/common/docu..._1xEV-DO_Session_Negotiation_Example_3-08.pdf

yes, i patch diamond phone firmware, and phone start working.
i write more detail at qmat support forum.
later i erase few memory in my diamond and wait jtag/jlink from ebay.

bump
Can you tell me how to do layer 3 trace? the pdf file in the previous messages does say the OUTPUT, but it doesn't say HOW the data was captured.
TIA

Data was captured via QXDM (Log view or, more usable, Filtered view), saved into .isf and parsed by the QCAT tool. Ask google for latest versions of this software.
BTW, you REALLY not need QCAT - the QXDM can give you same description of interesting packets (described in pdf (0x1077,0x1078,0x1079 etc.))
//WBR

Diamond meid solution
Hard SPL
Supercid
change radio to 1.0.0.8u
now you can ahnge scm to 2A or make meid 00000000000000 using dfs.

[Q] Secret menu codes for sony Z

Good day people
I know the one code for the service menu but am sure there is another code besides the *#*#7378423#*#* one!
Does anyone know the code or have a list of all the cods for the device?
Thanks

*#*#4636#*#* – Phone Information (allows you to change the SMS service centre number and more)
*2767*3855# – Factory Reset Phone
*#*#34971539#*#* – Shows completes information about the camera
*#*#7594#*#* – Changing the power button behavior – Enables direct power off
once the code enabled
*#*#273283*255*663282*#*#* – For a quick backup to all your media files
*#*#197328640#*#* – Enabling test mode for service activity
*#*#232339#*#* or *#*#526#*#* or *#*#528#*#* – Wireless LAN Tests
*#*#232338#*#* – Displays Wi-Fi Mac-address
*#*#1472365#*#* – For a quick GPS test
*#*#1575#*#* – A Different type GPS test
*#*#0283#*#* – Packet Loopback test
*#*#0*#*#* – LCD display test
*#*#0673#*#* or *#*#0289#*#* – Audio test
*#*#0842#*#* – Vibration and Backlight test
*#*#2663#*#* – Displays touch-screen version
*#*#2664#*#* – Touch-Screen test
*#*#0588#*#* – Proximity sensor test
*#*#3264#*#* – Ram version
*#*#232331#*#* – Bluetooth test
*#*#7262626#*#* – Field test
*#*#232337#*#* – Displays bluetooth device address
*#*#8255#*#* – For Google Talk service monitoring
*#*#4986*2650468#*#* – PDA, Phone, Hardware, RF Call Date firmware info
*#*#1234#*#* – PDA and Phone firmware info
*#*#1111#*#* – FTA Software version
*#*#2222#*#* – FTA Hardware verion
*#*#44336#*#* – Displays Build time and change list number
*#06# – Displays IMEI number
*#*#8351#*#* – Enables voice dialing logging mode
*#*#8350#*#* – Disables voice dialing logging mode
**05***# – Execute from Emergency dial screen to unlock PUK code
Source
Not all of them might be compatible with Xperia devices, they are all generic Android codes.

the last PUK code one
hey there hat **05***# doesn't work for me, when i enter all of that like **05*80063169*0000*0000#, this is what i typed in the emergency dialler and then it says.. "connection problem or invalid mmi code"
Well while entering puk code i don't get any tower (or should i? i don't know)
and swapping phones doesn't works as the sim is not detected by any other phone other than mine, please tell me how to overcome this problem

Hi every body. First none of those code work with my z except *#*#7378423#*#* and second when I make a call with my phone the lcd won't get dark. Please help me what to do. Thanks.

Please add *#*#4636#*#* to the list. Is a different test and information menu. Also there you can change the sms center number (this was my issue, since i am on a vodafone locked phone and changed the type of contract and had to change the sms center number also, but the number was grayed out in the phone`s settings).

DrKrFfXx said:
*#*#4636#*#* – Phone Information (allows you to change the SMS service centre number and more)
Not all of them might be compatible with Xperia devices, they are all generic Android codes.
Click to expand...
Click to collapse
Yet another useless "Samsung == Android" post.
4636 is pretty much the only generic Android code in there. Nearly all the rest are Samsung specific codes (except 06 which is a GSM code)

[Q] Using assisted dial in Sprint ROMs abroad

Hi everyone,
Wondering if someone could give me advice on using assisted dialing. I'm using Sprint HTC One abroad (in Ukraine) and I always used assisted dial on my CDMA phones. But recently I upgraded to HTC One and found that none of Sprint ROMs includes assisted dial feature. Actually similar feature is included as "north american dialing key" but it does not work the same way (it always assumes that home country is USA/CA). I looked inside Phone.apk (decompiled it to get smali files and readable xmls) and found that it still includes NBPCDUtility and AssistedDialingSettingV2 action but when I tried to launch them from shell (adb shell, am com.android.phone....) I receive a message that the Phone app has crashed. I also found that none of Sprint ROMs include HtcCdmaMccProvider.apk (contains db with country codes, IDD,NDD,etc), but Verizon ROMs still include this features (and HtcCdmaMccProvider). Then I tried to use Verizon apks but of course they didn't work (launching phone.apk writes to log "Failed to find provider info for com.htc.omadm" and then crashes).
So, I'm wondering if somebody (may be ROM makers ) knows if there is a way to override mCurrentCountry (com/android/phone/nbpcd/NBPCDUtility) (like it works in many Verizon phones) without recompiling phone.apk?

Lost Network setting G3 Samsung

Dreaded VM phone lost meid.
Service will not allow reactivation
I have serial and hex is there an app
To help edit or reenter the settings.
I noticed. In europe they have web pages about this. But for their countries system towers .
I realize swapping phones is not allowed but reinstalling your actual
# meid should fairly simple most likely a program converts your serial
Access code to generate all settings
On that unique phone hex generator.
Any thoughts are appreciated I noticed in CYn11 your settings were
Visible.
Thanks Doug

Dialer codes for Samsung Galaxy J3 Luna Pro Sm-S327vl Verizon variant for Straight Ta

Hey everyone I'm back with another dialer code tidbit for the Samsung Galaxy J3 Luna Pro model SM-S327VL Straight talk (Verizon variant) Android 6.0.1. I tried multiple dialer codes and I'm sure I may have missed one but I'm sure someone will post other working codes. I have a good majority of them her so please reply to this post if you find more that have been tested and are working. Some codes open a service menu but do nothing.I consider them as Does Not Function Properly or D.N.F.P.
Root is not necessary for these dialer codes to function!
Open your phone app and go to your dial pad and enter the codes exactly as posted. If your using a SM-S327VL the J3 Luna Pro for straight talk then they should give the same results as I got.
Dial...
*#0*# hardware module test
*#0011# D. N. F. P.
*#0283# Loopback settings
*#0808# USB settings
*#1106# Grip Sensor
*#1111# D. N. F. P.
*#1234# Software Version
*#12580*369# Main Version (AP, CP, CSC, RF Cal, HW Rev)
*#2222# D. N. F. P.
*#22558378# CABC test
*#22558463# reset call times
*#2663# Firmware Version
*#2683662# D. N. F. P.
*#34971539# Camera Firmware Standard Menu
*#35789# Device Keystring (displays START, PASS , FAIL)
*#66336# CP Debugging Level
*#7277# receiver call mode
*#7353# Hardware test
*#77467# Global IMS settings
*#87976633# dialer accepts the code but does not respond.
*#9090# D. N. F. P.
Well that's all I have cataloged all that I have found functioning/semi-functioning. Remember if you try these codes on a similar or different device model than the one I have listed (prior to writing the dialer codes) they may not function properly or work at all. Please let me know if you have any of the D. N. F. P. dialer codes do anything for you. All I see with them are a white service menu with 2 lines of data. Also if anyone has any dialer codes that I have left out or haven't listed here then please feel free to put them here. I hope this guide was useful to you. Thanks for viewing,
sosthenisRR

If you use es file explorer or another app that allows you to view the manifest each apk will have it's dialer codes listed. Not all will work. Remember that Verizon disables hidden menu so VL version will need to enable hiddenenu, likely why some of the codes open but go no further