Hello , i have a problem that started happening after I installed KD1 modem, i'm running Slim ICS 3.2 mnics-143 kernel ... I try to send SMS and always says sending failed... I tried installing stock modems like JVU , JVT but still same error happens ... Anyone with some experience that can help?
tyvm...
Have you tried clearing the data from the sms app? (This may delete your messages, use sms backup and restore to back them up)
You should have made a nandroid backup before flashing the modem, do this next time so you have a easy way to revert...
If the above does not work then you may have to reflash the rom...
First try clear cache and dalvik and see if that works if you haven't already. And if that doesn't then do the following,
Make a nandroid and back it up on your computer (just to be extra safe).
Flash with no wipe but this has caused further problems for me before where i started getting multiple apps force closing. At a slim possibility it may cause a boot loop. If any of this happens, then just do a wipe and flash, wipe cache and dalvik before flashing. (You may have to flash the rom twice (Not very likely).
I'we tried that reverted back to GB and still i cant send sms... anyone with any hint on why or what? i can receive sms no problem but fail to send em..
ahh i now see message centre not set think that is the issue ...
Related
Hi all,
So after I flash a new ROM (MIUI MGv2/RC8vC/MGv1) I always hang at the Galaxy S GT-I9000 screen - the first boot screen.
I am wondering what this means? is it a corrupt file, something wrong with my internal sdcard, ROM not installed properly?
Please help,
Thanks.
some times a wipe from recovery will help and goes back to normal boot
many issues may cause this problem for instance if framework.jar or android.policy.jar or... have some bugs , will happen like that
Hi,
By wipe you mean clearing the formatting system, data, cache, dalvik cache and a factory reset? I ask this because the MIUI roms are not are non-wipe and the instructions recommend you to format those places before install (which I did).
I mean wipe cache partition from recovery. just try it and ley us know if it works
Well I just tried again but it doesn't work because I can't access recovery mode. It hangs at the Galaxy S screen and doesn't move from there so I'm wondering why because if I can't fix the bad install then I can't access the recovery mode and can only flash.
if recovery dont work BUT download mode does,
start the whole process again, flash back to stock froyo with froyo bootloader.
did you come to MIUI from Gingerbread ??
Well i've done the process like 10 times, nearly every single time from froyo (JPU,JS5,Ezbase 2.0) and I also went from 2.1 to 2.2 and then to MIUI. The other times I have tried coming from CM7 as CM7 works.
well i have a similar issue but in my case i just wiped my data thru cwm on darky v8 xxjpy..
now i get boot loops,any idea what should i do??
i know this is not exactly the thread but if i get my answer it'll save me from starting a new one..
When I got bootloops i normally reflashed. If you don't have data it will probably work?
I assume you have data as your on Dark v8 when V9 is out?
i dont understand by have data??
i flashed v9.5 but went back to v 8 few months ago..
today i just wiped/factory reset my phone using cwm and it was succesful but now its bootloops and vibrations..
i never wiped my phone before and only have flashed using cwm,never used odin for flashing roms!!
OH I see, by data i meant personal data that you might want to back up...I'm not to most knowledgeable but I know how to flash roms. I reckon you should try to flash V8 it again if you can enter recovery.
I was trying some new roms on SGS i9000 and before doing so I made a nandroid backup with CWM. Now after flashing the new rom I find out I forgot to backup some contacts from the phone and I try to restore the old backup from CWM, it is able to restore system, cache but data (which is around 900 Mbytes in itself) it proceeds till a certain part and hangs there, the most I left it was 45 minutes without further progress then I remove the battery and reboot.
My question(s):
- has anyone else seen similar issue, I have searched around and it seems there is a similar issue for other devices due to limitation in yaffs maximum number of objects = 10000, while for some backups that number is exceeded, and some guys overcome this limitation in CWM by modifying the CWM package and changing the Max objects parameters and reflashing, has anyone done similar work for SGS I9000
- is there a way to open the backup images files and extract the contact information?
Appreciate your support
Gam
Have you tried to format data, datadata, system and wipe cache, i had a similar problem once and that worked for me for some reason
Sent from my Gt-i9000 running ics alpha4 from Xda premium
Hi pzayx,
yes I tried wiping everything before restoring but I get the same behavior.
restore works with previous "smaller" backup images but not the one that i need
Thanks anyway,
gam
have you tried to flash the same rom that you were on when you took the backup, ive read some threads about people trying to restore a backup for 2.3.3 on a 2.3.5 system and got problems with restoring data.
might be a long shot, but you could try to flash the same rom you took a backup of, and then try to restore?
Yes, I already tried that as well but same response, the data restore freezes at the same point and if I remove battery and power on only part of the data and apps are restored.
Sent from my HTC Desire using Tapatalk
Hi, im having problem with my o2x. Frirst phone started to behave strangely and every application has stop working. Error was
"uids on the system are inconsistent you need to wipe your data partition or your device will be unstable"
and then every time i restarted the phone it was the same error again so i decided to reinstall rom. Than error was gone but other problem appeared, now after 3 min of use phone get frozen and than i reinstall rom again and phone get frozen agan.
Please if someone can tell me what is the problem and how can i fix them.
You have mentioned reinstalling (reflashing?) the ROM but you haven't mentioned a factory reset so I have to ask... Have you tried a factory reset?
Should i do factory reset on rooted phone? if yes how can i do that. I read somewhere that factory reset should not be done on rooted phones. is that true?
In CWM, You always have to Wipe your Data,Cache,Dalvik Cache,Battery stats.
Optional : Format System.
For a rom to function well, else it will get all kind of problems, like you have.
Of course if you install a update for a ROM, you only have to wipe the cache/Dalvik Cache.
Remember to make a Backup of your apps with Titanium Backup.
I didnt wipe Dalvik Cache and Battery stats. I'll give it a try. What does Format System do?
The factory reset basically resets your phone to as it came from the factory. It erases all your settings and apps, and is recommended that you do that when you change from a stock ROM to a custom ROM.
Having root has nothing to do with it.
Me personally I like backing up my apps and doing a factory reset each time I change/update my ROM. This way I make sure I always have a clean system each time. Of course this might not be convenient if you like flashing a new ROM twice a week
Wipeing Dalvik Cache, Battery stats and factory reset didnt do the trick. I flashed cyanogenmode nightly now and its ok for now. Could it be problem with the rom?
"Factory reset" (/data wipe) doesn't wipe system apps. If you had on your old ROM some "broken" system app, you most likely still have it. First thing i would do is full device wipe (/data and /system partition wipe). If you dont know how to do this here is the script and how-to. Be aware of that this script can brick your phone (ofc then you can fix it with smartflash) is you won't follow instructions.
After that wipe and ofc flashing clean ROM (btw. which is it?), it still isn't working, it's most likely ROM's fault. It could be Baseband<->RIL problem eaither but i've never saw RIL problem which has influence of system stability.
Are you flashing back to stock or a custom ROM?
If you are flashing to a custom ROM, you need do all the wipe-steps and then do BacktoEXT3 before flashing the custom ROM,
http://forum.xda-developers.com/showthread.php?t=1021549
I'm currently running the latest CM9 on it with moboot... It seems like every time it boots up it pops up with that error message and literally won't go away and you have to reboot the device.. the only way I've found to temporarily fix it is to just wipe cache.... but it always comes back.
Is there any way to prevent this from popping up? It happened when I was on Classicnerd BUTTA too.
Wipe the system and caches, then reflash
I had this problem as well a while back. Wiping caches and reflashing the ROM worked for me.
And you guys didn't have the problem again, after that?
Help manually moving contacts and choosing a JB ROM.
If a pro could help me out I would appreciate it very much. I have been trying to move from a dangerous ICS build to JB and I am having this same problem.
My N7000 previously had this on it:
android 4.03
radio 19220zclp6
kernal version 3.0.15-i9220zclp1-cl131270 (bad ics kernal)
build number midnote 2.0 iml74k.zclp1
So I used ODIN to flash it to a GB rom but I got the com.android.process error and my phone would lock up.
So then I found this link http://forum.xda-developers.com/showthread.php?t=1424997 and flashed this ROM "N7000UBLR3 N7000UVOLR1 - Download - Argentina" from the bottom of the page. I wiped only the the cache (not the phone reset) and flashed it again but I still get the process error and phone locking up. I don't even know if this ROM is a safe ROM!!
Am I even on a safe kernal now? kernal n7000ublr3-cl890184 build imm76d.ublr3
What I need help doing is the following.
1. Before doing a full wipe, I need to either manually save my contacts to my PC or back them up. (no apps work but my pc can browse my phone) If I knew where my contacts were located, maybe I can manually copy them to my pc? So any help saving data from a partially unusable phone would help.
2. Flash to a safe GB rom, so I can then do the full wipes safely and then flash to a stable JB rom. (I have no clue which roms to choose here and need help).
Thanks for any help..
Hi Everyone,
I have a GT-N7000 - it's been working great since I bought it 9 months ago. I was running RocketRom on it for months. I've been using RR 11 (I didn't like 12) and haven't had a problem with it. The CWM that comes with it appears to be 6.0.1.2 and I kept the stock kernel (OneNote??). Lately, my sms messages were being sent sporadically and I kept getting this same SMS pop-up over and over (every time I sent an SMS). I know it's probably a carrier issue but I thought I would boot into recovery and wipe the cache and Dalvik. I've done this several times in the past without problems.
I first wiped the cache, then I did Dalvik. For Dalvik, I got the error E:\ unavailable (I recall seeing this in the past). I select "Reboot" and the phone booted back into CWM. I've tried removing the battery and same thing.
I ended up trying to flash back to the pre-rooted GB using Odin. The flash completes and the phone reboots but, yep you guess it, CWM comes up. It's the same version. So apparently this is not being updated by Odin??? I read somewhere that this is a CW bug that does not clear a flag to boot back into Android but the fix seems overly complex and worries me (I'm not afraid of doing it if it will fix it).
I'm entertaining the idea of using Kies to do a "Firmware Upgrade" which looks like it will install the latest ICS. It successfully downloads the new firmware then asks me to connect the phone. Before I do this, I wanted to check here to see if this is my only (best) option. Or if I should try something else? Also, Kies says system and data will be initialized so will my sms logs, photos, etc be deleted as well? Not a huge issue since I save the photos to the external sd. I just want to know if the USB storage will be wiped too.
[EDIT] I wanted to add that I TRIED to install Abyss from CWM and it hangs. Same ting with installing RR again. It appears that the file system is locked or something. Pretty much nothing works in CWM. I even tried mounting the various partitions then installing Abyss. It just hangs on "installing." I suspect the problem occured when I wiped the cache or Dalvik. I just don't know what
I appreciate any input.
Thanks!
dont use abyss... try other like hydracore or speedmod 3-15
Im a noob and im afraid i may have this also..
Try to download Philz kernel for your built number, and flash the philz zip file from recovery.
or if can't flash from recovery, try to download the ODIN file for philz kernel (TAR file).
It should re-injected the CWM.
Sent from the corner of this rounded earth.