i connect my phone to my pc
usb notification pops up
i click the turn on usb debugging that pops up
my heroc reboots.
it was working before but now its rebooting and i dont know why.
on my pc under device android phone shows up with no yellow !
my phone charges fine with this cable on the pc
never mind i figured it out
The theme i was using for cm7, called ics for mdpi devices, was making it reboot for some reason.
I changed the theme to cyanbread and tried again and voila usb debugging works again.
Related
Hi everyone- I think I broke my phone, but any suggestions would be appreciated. I had cog3 and wanted to upgrade to cog4. I started by disabling voodoo lagfix, but it hung up there for about an hour. I powdered down and now nothing works. I see a screen with a phone and computer and an exclamation poit. I am able to get to d/l mode, but odin doesn't recognize it. Tried reinstalling usb drivers, but windows thin ks im plugging in a gadget serial, whatever that is. Not sure where to go from here. Thanks again for any help
Make sure you have usb debugging enabled.
Menu> Settings> Applications> Development> USB Debugging
Connect phone to computer and hit usb connect. Android shouls turn from green to orange.
Sent from my SAMSUNG-SGH-I897 using XDA App
usb debugging
I can't turn the phone on to do that. I can't believe I forgot to turn usb debugging on before I started! Is there a way to turn it on without being able to turn the phone on?
Might want to try a couple of other USB ports on the computer. I know that it does not see my phone unless I plug it into a port on the back of the computer.
Tried different usb ports, even different computers, no luck. I failed to mention that I used an i9000 kernel. Do I need the i9000usb drivers?
Just an update : had to uninstall mini kies, reinstall, load the drivers per the ofgicial froyo upgrade instructions, then odin finally saw the phone and I was able to flash back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
3 days ago i flashed my sgs with Ultibread v1.3
Today i decided to flash back 2.2.1 firmware, but all of my 3 computers (10 usb ports) couldn't recognize my phone.
Try to search any solve of this problem, but no one tutorial has not helped.
What did i do?
uninstall all of samsung usb drivers
clean register of all garbage with "samsung"
reboot my computer 3 times
download latest samsung usb drivers v1.3.2000.0 (25.jan.2011)
get out battery for 15 minutes
try plug in other usb port
take computer, wich never connected my phone, install latest drivers (see previous step) and connect sgs to him...
In all cases, the result is one: Unknown USB Device.
System can load and "debug mode" switched on.
Please, help me...
My PC forgets my SGS on a regular basis. When I plug the USB into my phone it is usually a good 50/50 if it recognizes it.
I have found the best way to deal with it is to reboot the phone while it is still connected by USB to the PC. When the phone comes back up with the USB connected, the PC always discovers it right away.
Also avoid connected through a USB hub if possible, that always gives me trouble.
Omg! Solved.
Ultibread v1.3 and, maybe, 1.4 got issue with check in debug usb mode.
And without this check - windows can't recognize phone.
Solution:
turn on debug usb mode in settings, then put out battery when phone is ON.
Then you can get in download mode.
Case closed
Hi all,
I have a huge problem. I dont have USB mode anymore. When I plug the phone to my PC, it doesnt ask me if I want to connect it as a storage mass. It is only charging; windows doesnt recognize a new device too, so I cant use nvflash.
Besides, I dont have the recovery mode, I cant use it to install an previous rom...
Can you help me please ?
I have the same problem on my G2x after flashing ClockWorkMod...
I had the same problem. I asked the retailer for an exchange. However, just before I returned it, the phone was plugged in to my laptop USB for charging and all of a sudden there was a notification saying that USB was connected. I had done a factory reset before this but it hadn't helped.
You could try enabling Hidden Menus and then in Port Settings try changing from AP USB to CP USB and see if it helps.
Also, try reinstalling the drivers on your computer.
Hi all,
Please help me.
when i connect my LG P970 using USB cable to laptop, its not detecting.
I installed drivers many times. I restarted pc, phone many times, even i formatted(reset my phone to factory settings).
Noting is working.
I wanna root my mobile, but without connecting to pc via USB its not possible. ( itried Ginger break also, not working).
Thanks in advance.
musicking said:
Hi all,
Please help me.
when i connect my LG P970 using USB cable to laptop, its not detecting.
I installed drivers many times. I restarted pc, phone many times, even i formatted(reset my phone to factory settings).
Noting is working.
I wanna root my mobile, but without connecting to pc via USB its not possible. ( itried Ginger break also, not working).
Thanks in advance.
Click to expand...
Click to collapse
Make sure the cable is properly connected. Check for dust that might prevent it going in properly. Try a different cable. What OS are you using? I found where bootloader is dmg or incomplete Windows fails to detect it. Linux on the other hand detects it. Can't use it but you can detect it.
Can you connect to SW Update Mode? Battery out and plug into PC while holding vol up button.
If nothing works try taking it into the shop.
Sent From Optimus Black
xonar_ said:
Make sure the cable is properly connected. Check for dust that might prevent it going in properly. Try a different cable. What OS are you using? I found where bootloader is dmg or incomplete Windows fails to detect it. Linux on the other hand detects it. Can't use it but you can detect it.
Can you connect to SW Update Mode? Battery out and plug into PC while holding vol up button.
If nothing works try taking it into the shop.
Sent From Optimus Black
Click to expand...
Click to collapse
I connected it properly. Tried with different cable too.
Windows 7
I can connect to SW Update mode
musicking said:
I connected it properly. Tried with different cable too.
Windows 7
I can connect to SW Update mode
Click to expand...
Click to collapse
You can root your phone from there. If you have SW Update. I recommend taking it into the shop if you are still under warranty, If you don't have warranty then you can go ahead and root. Just install a patched bin and fls with Smart Flash Tool. It's one of the stickies (How to unbrick, I think)
hi
new to Android nation
I have the same issue when connecting to USB...
And I managed to flash with custom firmware (latest ZEUS version) and I rooted but the issue with USB connection is still there...
Anyway, I wiil try connecting it to Linux to check if that would work with USB connecting
UPDATE:
OK after some digging, I managed to (at least temporally) solve the issue... After fresh installing official 2.3.4 firmware I booted to recovery and from there formatted the system folder and then installed Zeus v7 firmware... anyway, USB connection and charging indicator work fine at first booting to system... As soon as I reboot the OS USB connection (and charging) get unstable, and after third reboot it completely goes away and the device does not recognize anything: if I connect USB cable it does not show any sing (charging indicator does not show battery charging, nor the device offers me to connect in mass storage, windows recognizes only modem but not the USB storage) and when I connect charger, battery indicator does not flash as charging... Battery monitor tool shows that "battery is discharging" even though the battery capacity seems to increase (according to growing percentage of battery capacity)... Is there a some kind of USB server... I am a total noob to Androiid OS (used to be Symibian from its beggining )so I hope you won`t mind if I used wrong terms in my explanation/comment...
I hope my explanation is not confusing
Cheers
UPDATE 2:
After installing Zeus v7.01 update, battery charging recognition got fixed using both USB cable and wall charger...
Anyway, USB recognition by PC problem still exists... But when in recovery mode I can successfully mount SD card to PC in Mass storage mode...
Will keep you updated... :victory:
Hello everyone,
Yesterday I installed CM13 and it is very good. I haven't found any problem as of now in my phone but I am getting BSOD everytime when I connect the mobile to my PC through USB. I tried everything from changing the cord to changing the usb port, even uninstalled LG drivers but still getting BSOD.
Can anyone help me to understand and solve this. Right now my only option is to take SD card out and connect it using Card Reader. Phone is working smoothly. No issues so far. Its just this problem is bugging me. Appreciate if you guys can help me out. Thank You.
Okay so I am getting BSOD only when I am enabling the USB Debugging. By disabling USB Debugging I am able to connect the phone to PC but it is only in the charging mode. I am not able to access any files. It is showing blank. So what should I do now?
kernel.debugger said:
Okay so I am getting BSOD only when I am enabling the USB Debugging. By disabling USB Debugging I am able to connect the phone to PC but it is only in the charging mode. I am not able to access any files. It is showing blank. So what should I do now?
Click to expand...
Click to collapse
1st: The USB Debugging problem only occurs on Windows, Linux distros are fine
2nd:Just pull out the status bar and click on the charging one. You'll be given 3 options: charging, MTP and PTP. (Sorry if I misspelled the names, it's been a long time since I've done this)
Hyoretsu said:
1st: The USB Debugging problem only occurs on Windows, Linux distros are fine
2nd:Just pull out the status bar and click on the charging one. You'll be given 3 options: charging, MTP and PTP. (Sorry if I misspelled the names, it's been a long time since I've done this)
Click to expand...
Click to collapse
Thank You. I can now access the files.
Yes I am on Windows 10. USB Debugging BSOD is still an issue. So is it okay to keep USB debugging off? I always keep that option enabled cause I thought its an important option if you happen to brick the device. So what is the solution? is this happening for everyone who are on custom rom?
Thanks once again.
kernel.debugger said:
Thank You. I can now access the files.
Yes I am on Windows 10. USB Debugging BSOD is still an issue. So is it okay to keep USB debugging off? I always keep that option enabled cause I thought its an important option if you happen to brick the device. So what is the solution? is this happening for everyone who are on custom rom?
Thanks once again.
Click to expand...
Click to collapse
It's okay to leave it off. If you happen to brick your device, it won't boot, meaning no USB debugging.
Hyoretsu said:
It's okay to leave it off. If you happen to brick your device, it won't boot, meaning no USB debugging.
Click to expand...
Click to collapse
Yes, Never bricked the device Thanks to XDA members who are always there to help novice like me from every situation. Thank You.
Someone post answer in cm13 thread - some issues with drivers from LG with cm roms compilations or something like that. Just UNINSTAL driver from PC and u good to go connect l90 via MTP
You mast UNINSTALL driver from PC and reboot PC.
Then install this drivers and reboot PC:
https://yadi.sk/d/8iKJQLio33FusS
L90 with 5.0.2 stok ROM or CM13 works correctly.
uns8816 said:
You mast UNINSTALL driver from PC and reboot PC.
Then install this drivers and reboot PC:
https://yadi.sk/d/8iKJQLio33FusS
L90 with 5.0.2 stok ROM or CM13 works correctly.
Click to expand...
Click to collapse
so with these drivers no BSOD when u put phone via mtp connection ?
EDIT: i test this so with drivers 4.0.4 there IS NO BSOD in Windows 7