Database Develop

[Q] odin successful but stuck on boot

hi XDA members ..
am kinda new on this stuff "noob".
i bought my sgs (GT I9000) from KSA with (and am not sure) I9000JPJG8 frimware.
the whole story is that i tried to upgrade to froyo but the process didn't when well and odin was stuck. so i ignorantly pulled the usb out, and had that phone->attention-> pc sign. but i was able to get to download mode. later i noticed that i used a I9000M froyo firmware.
anyway, i read through threads about semi-bricked sgs and found that i must reflash again my stock firmware, and that's what i did.
the odin flash is successful and the phone shows the galaxy s startup screen and then that loading sign and the loop starts ( loading sign appears - disappears -appear again ..etc) i pulled out the battery and powered it on to have a Galaxy s startup screen loop also.
i can't get to recovery mode, and here the names of the firmware i used to flash:
I9000JPJG8
I9000JPJPG
I9000JVJPF
I9000UGJH2
i need the firmware to have arabic support so that's why those above where my choices, but i wouldn't mind losing arabic for z sake of my new sgs
sorry if my english is bad
suggestions???!! and thanx in advance

have you been flashing these firmwares with PIT file ??
i think thats whats needed,
try to flash stock eclair 2.2 or froyo 2.2.1 with all 3 files and 512 pit.

i tried all .pit files to no avail...
and what do u mean by eclair 2.2 , isn't it 2.1 ??! and do u mean pit512 , 513 , 803 by the 3 files or what?
thx for replying
edit:
do u recommend certain odin version because i don't know which to use exactly ?

yea sorry i mean eclair 2.1
whenever i have trouble like you, i flash JM1 in all 3 files (phone pda csc ) and 512 pit, with the repartition box in odin checked.
works a treat everytime

i tried it but it stopped in z middle and odin said (FAIL)

have you made sure KIES is closed, even in the icon tray ??
Are you using odin 1.7 ??
also try to connect your phone direct to the motherboard
if it still fails, post me a screenshot of what odin looks like before you press start

oh my .. kies was closed in icon tray but there were some kies related stuff running when i opened the tasked manager. but unfortnately nothing happened , same things are still there.
here z pic , doing the method u mentioned before
h*tp://imageshack.us/photo/my-images/696/odink.png/

right the problem is you are using a firmware compressed into 1 .tar file
remove the pit file - uncheck re partition
remove phone
remove CSC
all you want is OJP_JG9.tar loaded into PDA.

A MAJOR UPDATE ..
while waiting for replies i tried this method in this post using eugene froyo :
http://forum.xda-developers.com/showpost.php?p=10498057&postcount=14
suprisingly my phone now changed to vibrant on start-up and has z following :
froyo 2.2
baseband T959UVJK2
kernel 2.6.32.9
now that it is alive .. can i shift to z froyo 2.2 with arabic support or do u suggest that i stick to it ?

i think i'll change since everything is messed up ..
vol. buttons are reversed .. music is not played through speaker unless head-phones are used .. numerous apps crashing ..
man am soo confused

you have flashed samsung vibrant on your samsung galaxy
that is why you have these problems !
did you download a GALAXY I9000 ROM ?? if not do so now.
Flash it in odin.
If it comes in 3 files (PDA, Phone, CSC) add 512 PIT and select re-partition
If it comes in 1 .tar file. Load it into PDA and DO NOT USE PIT OR REPARTITION
hit start and done, its so simple.
you really ought to read instructions before you go flashing ROMs.

i really did but it looks like i didn't pay attention to GT I9000/M thing ..
ok thanx for z help and i'll reply back when done with z ROM

i hate to be demanding but can u give me links cause am sick of downloading wrong files ((

www.samfirmware.com
http://forum.xda-developers.com/showthread.php?t=846913

so now my phone powers off when connected with usb ... what shall i do ????

can you boot into recovery ? if so do a full factory reset and try again. and try to flash a rom in recovery (if you have 2e)
i have no idea why the phone powers off with usb.
does it do this in download mode too ??
did you flash a stock rom ?? if so what rom did you choose

i flashed eugene froyo
should i use I9000 method or vibrant method for recovery ??
i got into recovery when i flshed the vibrant rom back then .. :s
edit: a question , have i lost z root thing when i flashed the vibrant or not ?

first of all enter download mode . Try this method ( press home and volume down and insert the usb conected at pc ) , and flash darky resurection 9.2 or ezrom 2.2.1 , i think both have bootloaders , I prefer ezrom ( saved my phone after CM7 or miui )

rooting s6500 100% working

WARNING: FLASH AT YOUR OWN RISK.THIS METHOD VOIDS WARRANTY!​
1st method
this is a boot.img modified by cdesai and FULL CREDIT goes to him!
if you want to thank someone,its him!i just share his work
to flash :
1 plug in a fully charged s6500D in download mode
2 start up odin
3 rename the cdboot.img to boot.img
4 put the boot.img in a full rom and flash it
link to boot.img
give your feedback here plz
2nd method!noob friendly
full credit goes to mb-14
if you want to thank someone,its him!i just share his work moddified for us
tested by me and works FULLY
recovery is s7500 but who cares??
so...
first download files from here
cwm recovery
doomlord's kit
boot phone in download mode by pressing vol down+home key+power button
open odin3 1.85
click the PDA button on the midle right and then select clockworkmod-5.0.2.8.tar.md5 that you downloaded
click start.
w8 for it to say pass with green background
now the phone will boot normally
shut it down again and press vol up+down+home+power to go to recovery
it will show gt-s7500 but it doesnt matter!
Now close Odin
when it gives you a menu go to your pc to the rootme.zip that you downloaded
extract everything in desktop
run the runme.bat (my first time failed so repeat)
w8 for it to finish
press the home button (it should be on the first choise of the menu "reboot system" )
you are done!
ENJOY ROOTED S6500 AND s6500D
3rd method-similar to 2nd by bahek332 ,not tested by me
1. open folder "odin", attach phone to pc, enable usb debugging, make screen timeot 10 minutes(that's just to prevent screen switching off, when you run exploit), go to bootloader(volume down+home+power on), turn off all antiviruses! click PDA, select root.tar, click START.
2. phone reboots with firmware from another phone, open "DooMLoRD_v4_ROOT_zergRush_busybox_su", run runme.bat, phone reboots.
3. take off battery, go to bootloader again(volume down+home+power on), run ODIN, click PDA, select S6500DXXLC4, click START. you can flash your region firmware of course. download at sammobile.com
4. well done
http://forum.xda-developers.com/atta...3&d=1340552704

Untested by me, flash it as your own risk.

@cdesai - a bit more informations about this img file?

reaper7md said:
@cdesai - a bit more informations about this img file?
Click to expand...
Click to collapse
stock XXLC4 with root

i dont understand. Does it root my SGM2?

Could you detail how must we do?
If we work with odin, what are files we put into Phone, PDA and CSC

The ustrugg
I think You must have a onefile firmware package (tar.md5),
then untar it, replace boot.img and tar again.
Probably you must remove md5 and leave only tar extension
because odin give you error with bad md5 checksum
In odin select "onefile" package (PDA)

how to extract one package (in linux)
extract one package:
tar xfv firmware.tar.md5
pack image:
tar -H ustar -c system.img.ext4 boot.img recovery.img fat.bin cache.img.ext4 hidden.img.ext4 > firmware.tar
add md5 sum:
md5sum –t firmware.tar >> firmware.tar
rename firmware.tar to firmware.tar.md5
mv firmware.tar firmware.tar.md5
my advice when flashing use a laptop with battery at 100% turn off everything antivirus ..... phone battery @ 100%
make sure you turn off power saving features off on laptop
before flashing modified boot.img flash unchanged image to check if everything is ok

anyone has try it..plese report it..
too worried for beginners even they ever do odin in other gadget..
thanks for sharing,,nice...

Im yoo nooby i will wait for noobfriendly guide
Sent from my GT-6500D using Tapatalk

Zedd247 said:
Im yoo nooby i will wait for noobfriendly guide
Sent from my GT-6500D using Tapatalk
Click to expand...
Click to collapse
I think me too.
Sent from my GT-S6500 using XDA

Have a go.
I don't have Mini 2.
I have not tested this boot.img by cdesai.
I've made it into an odin flashable package.
Select it in PDA.
select ur .pit
flash. (in download mode obviously)
Then download Superuser app from Play Store.
For S6500D
http://www.mediafire.com/?ryr0y7z1tavrhm1
DWYOR. This will not brick ur phone but if it's a mess head to samfirmware n flash to stock

HELP
can but if you know the backup stock boot.img .. I will do this .. please update me an easy way to root this s6500 .. THANKS

RangerCrew89 said:
can but if you know the backup stock boot.img .. I will do this .. please update me an easy way to root this s6500 .. THANKS
Click to expand...
Click to collapse
There is always samfirmware to get stock firmware/boot.img so y the need to back it up...

OK OK
because I just bought this s6500 For 2Days ago .. I am afraid there is no Stock s6500 firmware for this so if there was child's play to ROOT SGM2? If you know how to backup all STOCK FIRMWARE, I will use this boot.img ok ?
---------- Post added at 02:13 PM ---------- Previous post was at 02:07 PM ----------
roofrider said:
There is always samfirmware to get stock firmware/boot.img so y the need to back it up...
Click to expand...
Click to collapse
now i will update...then you gve me this Stock boot.img S6500DXLD1
[karnel version]
2.6.38.6
[email protected]#1
OK :good:

RangerCrew89 said:
because I just bought this s6500 For 2Days ago .. I am afraid there is no Stock s6500 firmware for this so if there was child's play to ROOT SGM2? If you know how to backup all STOCK FIRMWARE, I will use this boot.img ok ?
Click to expand...
Click to collapse
No, cant backup.
Are s6500 and s6500d both the same?
I see only firmware for s6500d at samfirmware, safe to assume both are same? i dont know.
This boot.img is for s6500d so maybe u should wait for some1 with that model to test it.
It'll not result in a brick, i cant say the same for different phone models.

RangerCrew89 said:
because I just bought this s6500 For 2Days ago .. I am afraid there is no Stock s6500 firmware for this so if there was child's play to ROOT SGM2? If you know how to backup all STOCK FIRMWARE, I will use this boot.img ok ?
---------- Post added at 02:13 PM ---------- Previous post was at 02:07 PM ----------
now i will update...then you gve me this Stock boot.img S6500DXLD1
[karnel version]
2.6.38.6
[email protected]#1
OK :good:
Click to expand...
Click to collapse
you got s6500 or s6500D?
sammobile has only for s6500D
the only s6500 i found was this http://www.tsar3000.com/Joomla/inde...xy-mini2-firmwares&catid=55:samsung&Itemid=82
which is actually exactly what i have for stock

HELP
roofrider said:
No, cant backup.
Are s6500 and s6500d both the same?
I see only firmware for s6500d at samfirmware, safe to assume both are same? i dont know.
This boot.img is for s6500d so maybe u should wait for some1 with that model to test it.
It'll not result in a brick, i cant say the same for different phone models.
Click to expand...
Click to collapse
is not the same .. s6500 with other s6500d karnel so when I switch to the stock s6500 XXLA1 DXLD1 not the same as if I update the firmware so this boot.img my s6500 will damage it, I hope you understand :angel: :crying: :crying:

RangerCrew89 said:
is not the same .. s6500 with other s6500d karnel so when I switch to the stock s6500 XXLA1 DXLD1 not the same as if I update the firmware so this boot.img my s6500 will damage it, I hope you understand :angel: :crying: :crying:
Click to expand...
Click to collapse
yes, since it's a new phone u'll have to wait.
Those with s6500d can try that, it'll not brick.
If something is messed up there is samfirmware.

RangerCrew89 said:
is not the same .. s6500 with other s6500d karnel so when I switch to the stock s6500 XXLA1 DXLD1 not the same as if I update the firmware so this boot.img my s6500 will damage it, I hope you understand :angel: :crying: :crying:
Click to expand...
Click to collapse
well we(s6500) need someone that can edit .smd.tar from tha link i gave above...
you can try what you want and then flash what i gave above to return to stock...

Restore Galaxy S I9000 as stock.

Hello everyone,yesterday i got my new galaxy S i9000 and i did install latest CM9.
I was wondering,how do i get back the STOCK firmware with its original kernel(obiviously locked bootloader) and without root? Thanks to everyone who will help me!

Hi there,
you just have to install the galaxy S divers on your computer and use odin to reinstall the stock ROM. Go on samfirmware to choose the Stock ROM you prefer...
I can't find the official thread here on XDA, but you should be alright with samfirmware (look it up on google).
(tick repartition!!!)

Wolf80 said:
Hello everyone,yesterday i got my new galaxy S i9000 and i did install latest CM9.
I was wondering,how do i get back the STOCK firmware with its original kernel(obiviously locked bootloader) and without root? Thanks to everyone who will help me!
Click to expand...
Click to collapse
you need to download 3 file odin from here http://hotfile.com/dl/146501544/03b0f87/I9000XXJVU_I9000OXAJVU_OXA.zip.html
and flash via odin
and post in q&a forum

Will flashing a Stock ROM lock the bootloader again?

512 pit file n reparation tick... right?
Sent from my GT-I9000

Wolf80 said:
Hello everyone,yesterday i got my new galaxy S i9000 and i did install latest CM9.
I was wondering,how do i get back the STOCK firmware with its original kernel(obiviously locked bootloader) and without root? Thanks to everyone who will help me!
Click to expand...
Click to collapse
just wanted to know that which method you used to root your phone and switched to cm9..?

When you are flashing a 3-file ROM (with PIT, yes, 512), TICK Re-Partition, when you are flashing a 1-file ROM (e.g. from samfirmware) do NOT tick Re-Partition

Ajoslaf said:
When you are flashing a 3-file ROM (with PIT, yes, 512), TICK Re-Partition, when you are flashing a 1-file ROM (e.g. from samfirmware) do NOT tick Re-Partition
Click to expand...
Click to collapse
Thank you very much bro... and what about boot loader ?? Tick or untick..??. sorry for noob questions
Sent from my GT-I9000 using xda premium

u.bindal said:
just wanted to know that which method you used to root your phone and switched to cm9..?
Click to expand...
Click to collapse
I flashed Semaphore 2.5.0 kernel with Odin,then i downloaded CM7,installed,configured,and installed CM9

Downloaded now the firmware from samfirmware! I have to tick repartion or not?? And,where should i insert the zip in odin??

I am using Android 2.3.3 on my Galaxy S i9000.... can i root it using 'Super-one-click'.....??

Guys,got a little problem...i flashed the STOCK firmware,but all i get is bootloop! I flashed latest version (2.3.6)

Will you root best cf-root kernel version of your firmware .. otherwise superoneclick must be on the GB.
---------- Post added at 07:37 PM ---------- Previous post was at 07:36 PM ----------
Wolf80 said:
Guys,got a little problem...i flashed the STOCK firmware,but all i get is bootloop! I flashed latest version (2.3.6)
Click to expand...
Click to collapse
It fw.pro samsung galaxy, you have a signature in a different model?

Now that i remember,before installing CM9,I had Gingerbread 2.3.6 and when the phone was booting up i had vodafone logo..

Wolf80 said:
Now that i remember,before installing CM9,I had Gingerbread 2.3.6 and when the phone was booting up i had vodafone logo..
Click to expand...
Click to collapse
After this, I recommend flash stock 3 fw.s pit.512 file and re-partition.

Flashing with 3 files now,i'll let you know!

misacek said:
After this, I recommend flash stock 3 fw.s pit.512 file and re-partition.
Click to expand...
Click to collapse
Maybe XXJVP 2.3.4, pda, modem, csc, and re-pit512 partition.Je version of it that helped me ..

Wolf80 said:
Flashing with 3 files now,i'll let you know!
Click to expand...
Click to collapse
3-files (PDA, Phone, CSC) & re-partition (w/ 512.pit) is mandatory when coming from CM7/9/10, since those are using different flash layout (MTD vs. BML). So just grab some stock rom (JW4 for example) and flash it.
Only tick re-partition (leave other settings as they were) (SGS bootloaders aint locked so no need to worry about those..)
You should be fine with these instructions..I have flashed my phone several times like this (back from CM9 etc..)
Edit: btw, this topic should be in Q&A..

Why is everyone is replying ?Wrong section ..This is not a Q/A Section ..Please don't reply

Before i also mention that you posted in the wrong section:
You need to flash a PIT file and not only tick repartition, how should the partition layout gets changed if you don't choose one to change to??
Now that you know it:
WRONG SECTION!

help my phone would not boot up

hi all..when power on my phone it stuck at galaxy s wording and would not boot up..try flash original gingerbread firmware with bootloader using odin result still the same.. anyone can help me please..

did u use 3 file GB with pit and re-partition? if u used only 1 file ROM that could be not enough

[Q] Re-Partition operation failed!!

I am trying to downgrade my sgsa from jb to gb and my mobile is from hongkong
i use the three combo files phone csc and pit files
but whenever i start to flash odin gives me error re-partition operaion failed
and in download mode i see "Custom pit binary!!" in red lines
I have searched a lot but no solution
i have tried many odin versions as well but all were same
i even used heimdall but it didnt flashed too
right now i can just use jellybean i can flash any jb roms stock or custom but cannot downgrade to gb
anyone has the solution for this

ManzzaShahi said:
I am trying to downgrade my sgsa from jb to gb and my mobile is from hongkong
i use the three combo files phone csc and pit files
but whenever i start to flash odin gives me error re-partition operaion failed
and in download mode i see "Custom pit binary!!" in red lines
I have searched a lot but no solution
i have tried many odin versions as well but all were same
i even used heimdall but it didnt flashed too
right now i can just use jellybean i can flash any jb roms stock or custom but cannot downgrade to gb
anyone has the solution for this
Click to expand...
Click to collapse
maybe u chose the wrong pit file... i would advise you to use 1 single md5 file instead of using parts file.

Patlcs said:
maybe u chose the wrong pit file... i would advise you to use 1 single md5 file instead of using parts file.
Click to expand...
Click to collapse
i have tested and downloaded 2 times and same problem
and i am not the only 1 there are other ppl also who are facing this issue
there is no any solution i find until now

Hi dowload this
http:/ /d-h. st/sA3 (delete spaces)
And then flash in odin v3 1.85 only
PIT*: GT-I9070_EUR_XX_8G.pitPDA*: CODE_GT-I9070_I9070DXLD1_CL1068093_REV00_user_SEC_KEY_LD1_ 8G.tar.md5CSC*: CSC_GT-I9070-MULTI-CSC-OLBLD1_SEC_KEY_8G.tar.md5
Congratulations
I recomend that whipe all
Sent from my GT-I9070 using xda premium

Gabboxxx said:
Hi dowload this
http:/ /d-h. st/sA3 (delete spaces)
And then flash in odin v3 1.85 only
PIT*: GT-I9070_EUR_XX_8G.pitPDA*: CODE_GT-I9070_I9070DXLD1_CL1068093_REV00_user_SEC_KEY_LD1_ 8G.tar.md5CSC*: CSC_GT-I9070-MULTI-CSC-OLBLD1_SEC_KEY_8G.tar.md5
Congratulations
I recomend that whipe all
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
i am using those files bro but not working
maybe problem because of a hongkong variant

Broswe in samfirmaware a ROM of honkong
Sent from my GT-I9070 using xda premium

me too only can hongkong rom flash but i want persian language
cannot flash any rom
pit repartition error
jvbmd1 have mor file as other stock md5 file
---------- Post added at 08:55 PM ---------- Previous post was at 08:54 PM ----------
me too only can hongkong rom flash but i want persian language
cannot flash any rom
pit repartition error
hongkong have mor file as other stock md5 file

can you fix re partition error when flash ?
ManzzaShahi said:
i am using those files bro but not working
maybe problem because of a hongkong variant
Click to expand...
Click to collapse
hello
can you fix your phone ?
re partition error when flash ?
only hon Kong ROM worked and flashed for me

zakaria9 said:
hello
can you fix your phone ?
re partition error when flash ?
only hon Kong ROM worked and flashed for me
Click to expand...
Click to collapse
ya can be fixed bro :laugh::laugh::laugh:
you first root and install root explorer then copy "tee" folder to your sdcard
now download firmware of other region and flash it any jellybean
then root again and replace the "tee" folder with the one you saved before
if you want to downgrade to gb download files and just flash pda file and after success boot and then flash hongkong region firmware