[Q] AbyssNote flashed, but CWM recovery not working properly... - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

I rooted my phone with a stock rooted Rom last week, and have just yesterday flashed [AbyssNote][v4.2 Final] to my device.
Because it comes with CWM recovery on it, and it seems the best option for safe restoring etc...
(as i am not able to post a reply to the direct thread of the AbyssNote][v4.2 Final] post)
However my problem is this ...
... when I press power+volume up+home i get the CWM screen showing the version and the options, however i cant press any buttons. Nothing happens except the screen blinks and shows the same screen.
When i press volume down to select a different option, the highlight bar moves, but then the screen blinks black, and comes back up with the initial CWM screen. Any button is the same. Home button doesn't select the option it also makes the screen go black, then the CWM screen flashes back up.
I tried flashing the Kernel again, but same problem.
Another problem is that if i game for an hour the temperature gets to 45 degrees and the device freezes... I can underclock it and that helps but temps still get quite high..
If nothing can be done to solve these issues, can someone recommend a different Kernel to flash?

hamdogg said:
I rooted my phone with a stock rooted Rom last week, and have just yesterday flashed [AbyssNote][v4.2 Final] to my device.
Because it comes with CWM recovery on it, and it seems the best option for safe restoring etc...
(as i am not able to post a reply to the direct thread of the AbyssNote][v4.2 Final] post)
However my problem is this ...
... when I press power+volume up+home i get the CWM screen showing the version and the options, however i cant press any buttons. Nothing happens except the screen blinks and shows the same screen.
When i press volume down to select a different option, the highlight bar moves, but then the screen blinks black, and comes back up with the initial CWM screen. Any button is the same. Home button doesn't select the option it also makes the screen go black, then the CWM screen flashes back up.
I tried flashing the Kernel again, but same problem.
Another problem is that if i game for an hour the temperature gets to 45 degrees and the device freezes... I can underclock it and that helps but temps still get quite high..
If nothing can be done to solve these issues, can someone recommend a different Kernel to flash?
Click to expand...
Click to collapse
Abyss 4.2 kernel has touch recovery. Pressing buttons wont help. You have to touch the buttons given on the screen bottom. Back arrow , Up, Down and enter/select.
The touch button calibration are little off meaning if you touch directly over the enter/select key it still takes the command of down....so touch a little towards the right side of enter key and it will work the function as desired.
Hope this helps!

Thanks...
Well... that made me feel like a dork!
Thanks for the reply. It certainly solved my CWM issue. Making a backup now...
- Is the temperature supposed to get high on this Kernel? I keep putting it in the fridge just before i charge it, as i dont want anything above 38 degrees/ 100 degrees FH

hamdogg said:
Well... that made me feel like a dork!
Thanks for the reply. It certainly solved my CWM issue. Making a backup now...
- Is the temperature supposed to get high on this Kernel? I keep putting it in the fridge just before i charge it, as i dont want anything above 38 degrees/ 100 degrees FH
Click to expand...
Click to collapse
No problem mate!! Everyone is learning here
Also this is generic with Note. While charging or while playing games or while watching some movie the note will get heated. Nothing can be done apart from not doing the said activities. but mine doesn't freeze up as you stated. And also i would say don't keep in fridge......might do more harm then doing good. Let it cool by itself. Heating and rapidly cooling might crack open some connections and then you will have to run for the service center!!

Different Kernel??
Phone froze again a few mins ago, and kept freezing immediately after 20 seconds of booting. Left phone as the back felt real hot! After 10 mins booted fine, but was 32 degrees.
I think im going to have to go to a different kernel. Any recommendations?
I want to overclock to 1700mhz (ish) so... anything that could do that and is stable?
Thanks man.
** Edit: My radio(modem) keeps turning itself off also. Get a crossed out circle where the signal should be. I really need to change the Kernel. What should i go to? and if you could provide a link would love it!

Have you overclocked your Note? i think you have and you have "Set on boot" ticked in setCPU.
if you have ... then i hope you have made some "Profiles" like "during Charging" and "Screen off"
if yes then
Connect your note to the charger and open setCPU and reset the clock back to 1.4ghz .

Thanks for the reply.
Yes I am over clocking. Cranked it down to 1664mhz and is fine for normal day use. Gaming it crashes, so I'm guessing its too hot.
I have it set on boot, 'lagfree' and have two profiles with a max mhz of 500. ('charging' and 'temp>' with a warning at 38 degrees C)
When i run a stability test it is fine. When i run a benchmark it freezes every time.
Ideas?
Crank it down to 1500mhz? might as well not overclock at all if thats the case
Just crashed again when i was using it, and temp. was only 22 degrees. With a max cpu of 1400mhz.... Interesting.

Yeah keep playing with the figures till you find the sweet spot.

Related

phone turns on up until galaxy S screen then goes blank. Bottom icons stay lit.

my phone stays at Galaxy S screen then goes blank but bottom icons stay on. There was a failed update but it still worked after. It had been fully charged and powered off on its own. tried taking the battery out numerous times, held the volume buttons down and pressed power button. it will go to at&t screen and then act like it's powering up. when it gets to the Galaxy S screen it will stay for about 30 seconds. then the screen goes blank and the bottom icons are still lit up. there is no vibrating. It also won't turn off unless i take the battery out.
Flash a stock rom and start over.
Also make sure you have at least 50 mbs free on your phones internal memory. I have seen two cases where the person didn't have enough memory left and the phone would light the buttons on touch but not light the main screen or respond to any commands.
I have this exact same problem. I am new to this whole world (yes, I am a n00b), which is why I picked up this Captivate in the first place. I can easily get into download and recovery mode. I tried Odin 1 click for gingerbread and then Heimdall for the original 2.1, as outlined in this thread. Both times it ran successfully, and for both it always boots to the S screen. Then the screen will go black, as the original poster said. Only way to fix is pulling the battery.
Re: mikegy2002, How do you clear the memory?
Could I flash the ROM any other way besides one click?
Thanks!
What would you suggest the op flash. I would think a GB stock would be best but which one.
Sent from my SGH-I727 using xda premium
I've read it's best to flash the one it came with, which could be 2.1, 2.2, or 2.3, depending. I can't find out how to flash back to stock besides the one clicks, which haven't been working for me.
It seems like this would be a really easy problem to fix, if you can get into download mode. But I guess not.

Screen turns white after lock

Hi @ll
i have a strange issue and its making me nuts..
My phone (GT-N7000) only seems to run on samsung kernels or something..
Case1:
I flashed SpeedMod kernel and it boots up and everything seems fine and works as expected, but when the screen locks and I try to unlock then my phone dont work anymore.
My screen will start getting white dots and it get more and more white dots until the screen is filled with white dots... My phone is unusable and shows no reaction when that happens, I have to pull the battery or hold the powerbutton long to reboot.. This problem stays after every reboot, and it happens on every screen lock.
Case2:
I flashed CM9, same issue as with the speedmod kernel..
I tryied reflashing a ton of times, but i am clueless.. I am not able to use custom roms..
I hope I dont have any faulty hardware or newer Revision that wont work.?
Is anyone else having this issue?
jscurtu said:
Case1:
I flashed SpeedMod kernel and it boots up and everything seems fine and works as expected, but when the screen locks and I try to unlock then my phone dont work anymore.
My screen will start getting white dots and it get more and more white dots until the screen is filled with white dots... My phone is unusable and shows no reaction when that happens, I have to pull the battery or hold the powerbutton long to reboot.. This problem stays after every reboot, and it happens on every screen lock.
Click to expand...
Click to collapse
Exactly the same problem here !
Just flashed my wife's new phone with darky rom and got this bug.
Did you solved your issue ?
Edit1:
* Attached a picture of what happens.
* The phone seems to respond in the background. I've been able to take same screenshots, and the image show "what should have been on the screen"
Edit2:
Sometimes I can get a "good screen", after "playing with power then home" buttons.
Edit3:
* same problem here and here
Edit4:
Found something interesting there
The phones turns off after 10 secs, and even after 10 mins, most of time, the same problem will occur : a black screen with only one pixel will appear, (red color one, then, 2, and more).
I have changed the kernel, tried another one, and the problem is gone.
Then, which kernel would be best used for that rom?
Click to expand...
Click to collapse
I have to test that...
Edit5:
SOLVED !
Flashed new kernel: AbyssNote -> OK
Also tested another version of franco.Kernel with no luck
I have the exact same problem!
Why is this not a common problem experienced by everyone using custom rom/kernel?

[Q] Samsung Galaxy S GT-I9000 won't work if not plugged on external power source

Hi guys,
The following problem has taken me litterally DAYS of reading XDA, trying everything I could, but still no solution. Googling and searching this forum didn't help either, and it's totally weird.
It's a Samsung Galaxy S GT-I9000, on which were installed, almost two years ago, the ClockWorkMod recovery, Darky's ROM, Froyo, and everything was fine for months. Then, one day, out of nowhere, it switched off, without notice. Impossible to switch it on again! I remembered having seen some strange battery behavior few days before, like falling from 80% to 30% with no reason, so I thought of a battery issue. I plugged it for a full night. In the morning, I was able to boot it, but not easily, and all apps were crashing: during boot, or when launched manually. Yes, all I tried were crashing! Then, the phone became fully not bootable: press the power button, the screen shows "Samsung GT-I9000", then switches off...
I ordered a new battery: same result.
A guy from a phone repair store told me to plug the phone, and keep the power button down for 2 minutes: after this, I could reboot the phone, and thus, wipe data (factory reset). But it didn't help.
After "playing" a bit with it, I realized that the problem is:
the phone won't boot if an external source of power is not connected (as said above, white text shows, then the phone "dies")
if started with power cord/usb, the phone will work fine, all the time
if started with power cord/usb, and the external power source removed once the phone is booted, the phone will work fine, UNTIL the screen goes black for power saving mode or by pressing pwoer button, after which, within seconds, you can't open the phone anymore. I mean: if you press the start/power button immediately after the screen goes black, the screen goes on again, and the phone is ok. If you wait for few seconds, it's over, you can't do anything, and have to reboot the phone. This said, the phone doesn't vibrate, so I suppose it's not really off. But then... what is this state??
I really tried my best: updated to GB2.3.6, bricked my phone trying to re-install the CWM and having a bootloop, installed and used Odin and Heimdall, reverted to stock kernel, etc, etc, etc.
I feel sorry to bother you guys, I was really convinced that with the incredibly huge amount of data, how-tos, explanations, etc. I would manage to get rid of this, but this problem, though I don't really think it's hardware (but maybe it is?) stayed across so many kernels, roms, etc. that it's killing me!
For the record:
Model number: GT-I9000
Micro-software (?): 2.3.6
Baseband: I9000XXJW4
Kernel: 2.6.35.7-I9000XWJW7-CL1125830 [email protected] #2 (problem was the same with [email protected] #2)
Version number: GINGERBREAD.XXJW4
Any help would be greatly appreciated, considering that a wireless phone that needs to be wired is a little bit of an issue... :laugh:
Thanks in advance !
Marc_B_ said:
Hi guys,
The following problem has taken me litterally DAYS of reading XDA, trying everything I could, but still no solution. Googling and searching this forum didn't help either, and it's totally weird.
It's a Samsung Galaxy S GT-I9000, on which were installed, almost two years ago, the ClockWorkMod recovery, Darky's ROM, Froyo, and everything was fine for months. Then, one day, out of nowhere, it switched off, without notice. Impossible to switch it on again! I remembered having seen some strange battery behavior few days before, like falling from 80% to 30% with no reason, so I thought of a battery issue. I plugged it for a full night. In the morning, I was able to boot it, but not easily, and all apps were crashing: during boot, or when launched manually. Yes, all I tried were crashing! Then, the phone became fully not bootable: press the power button, the screen shows "Samsung GT-I9000", then switches off...
I ordered a new battery: same result.
A guy from a phone repair store told me to plug the phone, and keep the power button down for 2 minutes: after this, I could reboot the phone, and thus, wipe data (factory reset). But it didn't help.
After "playing" a bit with it, I realized that the problem is:
the phone won't boot if an external source of power is not connected (as said above, white text shows, then the phone "dies")
if started with power cord/usb, the phone will work fine, all the time
if started with power cord/usb, and the external power source removed once the phone is booted, the phone will work fine, UNTIL the screen goes black for power saving mode or by pressing pwoer button, after which, within seconds, you can't open the phone anymore. I mean: if you press the start/power button immediately after the screen goes black, the screen goes on again, and the phone is ok. If you wait for few seconds, it's over, you can't do anything, and have to reboot the phone. This said, the phone doesn't vibrate, so I suppose it's not really off. But then... what is this state??
I really tried my best: updated to GB2.3.6, bricked my phone trying to re-install the CWM and having a bootloop, installed and used Odin and Heimdall, reverted to stock kernel, etc, etc, etc.
I feel sorry to bother you guys, I was really convinced that with the incredibly huge amount of data, how-tos, explanations, etc. I would manage to get rid of this, but this problem, though I don't really think it's hardware (but maybe it is?) stayed across so many kernels, roms, etc. that it's killing me!
For the record:
Model number: GT-I9000
Micro-software (?): 2.3.6
Baseband: I9000XXJW4
Kernel: 2.6.35.7-I9000XWJW7-CL1125830 [email protected] #2 (problem was the same with [email protected] #2)
Version number: GINGERBREAD.XXJW4
Any help would be greatly appreciated, considering that a wireless phone that needs to be wired is a little bit of an issue... :laugh:
Thanks in advance !
Click to expand...
Click to collapse
That's a very strange problem... let's try something, remove the battery, sim card and sd card and hold the power button for 1-2 minutes, btw when the screen is off, is really the phone off or just the screen? did you try to make a call to your phone when the screen is off?
timberman4444 said:
That's a very strange problem... let's try something, remove the battery, sim card and sd card and hold the power button for 1-2 minutes, btw when the screen is off, is really the phone off or just the screen? did you try to make a call to your phone when the screen is off?
Click to expand...
Click to collapse
Hi timberman thanks for the answer!
You're very right: I totally forgot to say that what initially allowed me to restart my phone "regularly" was this procedure of pressing the power button for 2 minutes (hint given by a man from a repair shop). Before this, I couldn't (kind of a bootloop).
It's a very good question! I don't think the phone is really off in fact, because there isn't this vibration saying the phone turned off... Let me try to call it!
F..k! I was redirected right away to the voicemail... so... phone was off
I'm starting to think it's an harware issue... I reinstalled lots of ROMs, kernel, etc. Same ****...
Any idea?
Marc_B_ said:
Hi timberman thanks for the answer!
You're very right: I totally forgot to say that what initially allowed me to restart my phone "regularly" was this procedure of pressing the power button for 2 minutes (hint given by a man from a repair shop). Before this, I couldn't (kind of a bootloop).
It's a very good question! I don't think the phone is really off in fact, because there isn't this vibration saying the phone turned off... Let me try to call it!
F..k! I was redirected right away to the voicemail... so... phone was off
I'm starting to think it's an harware issue... I reinstalled lots of ROMs, kernel, etc. Same ****...
Any idea?
Click to expand...
Click to collapse
Hi mark, i'm totally out of ideas for your problem... anyway, maybe you read mi answer wrong, in your post you say that the guy in the repair shop tell yo to press the power button with THE PHONE PLUGGED IN, but what i say is press the power button 2 minutes WITHOUT BATTERY, btw i keep thinking about this.. if any idea comes to my mind i tell you.
Hi again, try to play a song and turn the screen off to see what happens.
Sent from my GT-I9000 using xda app-developers app
timberman4444 said:
Hi mark, i'm totally out of ideas for your problem... anyway, maybe you read mi answer wrong, in your post you say that the guy in the repair shop tell yo to press the power button with THE PHONE PLUGGED IN, but what i say is press the power button 2 minutes WITHOUT BATTERY, btw i keep thinking about this.. if any idea comes to my mind i tell you.
Click to expand...
Click to collapse
Hi! Answering is already nice
I tried the button pressed for 2 minutes without battery: didn't change anything.
I tried playing a sound: MAN, YOU'RE A GENIUS!!! Launching the music, then forcing the screen off with power button lets the music play, and OF COURSE, I can reactivate the screen by pressing the home button. The screen goes off normally again after few seconds, but the music is still playing, etc. So, as long as the music goes, the bug doesn't happen!
Other hints:
For some time already, when I was removing the phone from my ear after a call, quite often, the screen was staying off, and I had to press a lot of buttons to have it on again, and be able to close the call
The moment where it crashes when booting without power is the very INSTANT where the initial white text (Samsung Galaxy S) goes brighter. So, if you unplug the power cord just after this, the boot ends normally. In summary, something happens at boot just after screen brightness changes which is the same thing happening when the screen goes off for power saving. All this, only when no external power is plugged.
Hehe, we (you) are making progress
Marc_B_ said:
Hi! Answering is already nice
I tried the button pressed for 2 minutes without battery: didn't change anything.
I tried playing a sound: MAN, YOU'RE A GENIUS!!! Launching the music, then forcing the screen off with power button lets the music play, and OF COURSE, I can reactivate the screen by pressing the home button. The screen goes off normally again after few seconds, but the music is still playing, etc. So, as long as the music goes, the bug doesn't happen!
Other hints:
For some time already, when I was removing the phone from my ear after a call, quite often, the screen was staying off, and I had to press a lot of buttons to have it on again, and be able to close the call
The moment where it crashes when booting without power is the very INSTANT where the initial white text (Samsung Galaxy S) goes brighter. So, if you unplug the power cord just after this, the boot ends normally. In summary, something happens at boot just after screen brightness changes which is the same thing happening when the screen goes off for power saving. All this, only when no external power is plugged.
Hehe, we (you) are making progress
Click to expand...
Click to collapse
Hi again, it seems like your phone is unable to exit the deep sleep mode or something like that so, let`s try another thing, in ICS or JB there´s an option in the developer option settings that unfortunately is not present in gingerbread roms, so, you can try to switch to a ICS/JB rom and go to settings-developer options and disable the "PM sleep mode" let`s see what happens then
timberman4444 said:
Hi again, it seems like your phone is unable to exit the deep sleep mode or something like that so, let`s try another thing, in ICS or JB there´s an option in the developer option settings that unfortunately is not present in gingerbread roms, so, you can try to switch to a ICS/JB rom and go to settings-developer options and disable the "PM sleep mode" let`s see what happens then
Click to expand...
Click to collapse
I tried to install ICS, with a GREAT tutorial found here: http://forum.xda-developers.com/showthread.php?t=1494493 Sadly, the phone reboots after installing the ICS kernel, and then doesn't work anymore, I had to reinstall the Gingerbread (I tried twice).
Last news: I let the phone play music (sound muted!!) for about 12 or 18h: all was fine! So I decided to pause the music, and see what happens. Boom ((c) Steve Jobs)!! The screen went black, and phone was "dead". I was expecting this, so no panick, I put back my SIM card, my SD card, and tried to reboot, with power cord plugged: it boots until the screen shows the small loader animation, then the empty battery image, but then goes black again, instead of showing the charging battery!! Download mode is still available, so I'll try to reflash the kernel, say.
It's like if each time screen was put black, phone was dying.
I can't stress enough how I appreciate your help: even if we can't save my phone, it's very pleasant to be able to TRY things. Thanks man!! :good:
Update: I reinstalled all... and it's not, even with power cord in, going further than the "Samsung Galaxy S" white text. The moment this picture disappears from screen, phone is dead. For good this time ?
Marc_B_ said:
I tried to install ICS, with a GREAT tutorial found here: http://forum.xda-developers.com/showthread.php?t=1494493 Sadly, the phone reboots after installing the ICS kernel, and then doesn't work anymore, I had to reinstall the Gingerbread (I tried twice).
Last news: I let the phone play music (sound muted!!) for about 12 or 18h: all was fine! So I decided to pause the music, and see what happens. Boom ((c) Steve Jobs)!! The screen went black, and phone was "dead". I was expecting this, so no panick, I put back my SIM card, my SD card, and tried to reboot, with power cord plugged: it boots until the screen shows the small loader animation, then the empty battery image, but then goes black again, instead of showing the charging battery!! Download mode is still available, so I'll try to reflash the kernel, say.
It's like if each time screen was put black, phone was dying.
I can't stress enough how I appreciate your help: even if we can't save my phone, it's very pleasant to be able to TRY things. Thanks man!! :good:
Update: I reinstalled all... and it's not, even with power cord in, going further than the "Samsung Galaxy S" white text. The moment this picture disappears from screen, phone is dead. For good this time ?
Click to expand...
Click to collapse
you tried to install the rom on the recovery instead of odin?
timberman4444 said:
you tried to install the rom on the recovery instead of odin?
Click to expand...
Click to collapse
Hi! No, I didn't, I used Odin. But now, I can't try anything anymore The only "results" I can get from this phone are:
- enter download mode and update from Odin (maybe from Heimdall, too, but I didn't check)
- reboot until the first moment the screen goes black, after which, the phone becomes fully unresponsive
Marc_B_ said:
Hi! No, I didn't, I used Odin. But now, I can't try anything anymore The only "results" I can get from this phone are:
- enter download mode and update from Odin (maybe from Heimdall, too, but I didn't check)
- reboot until the first moment the screen goes black, after which, the phone becomes fully unresponsive
Click to expand...
Click to collapse
so, you can`t install any rom at the moment?
timberman4444 said:
so, you can`t install any rom at the moment?
Click to expand...
Click to collapse
I can! I can install any kernel, or ROM, trhough Odin, but I can't boot at all... Except if someone has a magical trick, I would say it smells like coffin...
Marc_B_ said:
I can! I can install any kernel, or ROM, trhough Odin, but I can't boot at all... Except if someone has a magical trick, I would say it smells like coffin...
Click to expand...
Click to collapse
Pretty bad signals there.. i think you should go to a repair shop or buy another device
timberman4444 said:
Pretty bad signals there.. i think you should go to a repair shop or buy another device
Click to expand...
Click to collapse
Sadly, yes... thanks for helping however !

Help me!

So I installed HTC_M7's CM10.2 ROM, after using it for a little bit, i decided to go back to sense. So I got rid of that and installed this rom. It worked fine after I booted up, except that none of my apps where downloading, so I decided to restart, now my phone is stuck in either the shutdown, or boot up animation.
I tried holding the power button but it's not doing anything, also tried pressing the power and volume down button.
Right now I'm just waiting for the battery to die, it was at 38% when I decided to restart.
Any suggestions? I was going to see if I could get into recovery and wipe everything after the phone dies and charges a little bit, then add more charge and RUU it.
EDIT: I have clockworkmod recovery.
EDIT: #2, tried the, shine a bright light on the phone and press the power button thing, and it worked, I don't really get how that fixes it.
alberto122509 said:
EDIT: #2, tried the, shine a bright light on the phone and press the power button thing, and it worked, I don't really get how that fixes it.
Click to expand...
Click to collapse
I've seen it said that it is a protection from accidents in your pocket or bag.

Bricked HTC One

So I've posted this problem here before:
http://forum.xda-developers.com/htc-one/help/please-confirm-totally-bricked-t2831685
Just wondering if any of you would know how to fix it.
Probably no one will want to read that much, so here's the short version:
-Can't enter bootloader
-Can't enter recovery
-ABD doesn't work
-Fastboot doesn't work
Reasons why I think it still can get fixed:
-It stills turns on.
-Battery has ran out a couple of times, so it still charges.
-Windows 8 makes a pulg-in sound when I connect the phone to the laptop.
The phone also keeps rebooting each 6 to 10 seconds, so it is actually a plug-in, and plug-out, and a plug-in, and so on...
It doesn't list anything inside Device Manager.
Some people have tried Dexter's fix for bricked devices, but I think it only works for devices listed at least as QHSUSB_DLOAD.
Mine is not recognized that way... or at all.
That plug-in sound though.
HTC Drivers Installed:
setup_3.1.24.5_htc.exe
HTC_BMP_USB_Driver_x64_1.0.5375.msi
HTC Driver 4.10.0.001.exe
HTC Sync Manager
KomuroXV said:
So I've posted this problem here before:
http://forum.xda-developers.com/htc-one/help/please-confirm-totally-bricked-t2831685
Just wondering if any of you would know how to fix it.
Probably no one will want to read that much, so here's the short version:
-Can't enter bootloader
-Can't enter recovery
-ABD doesn't work
-Fastboot doesn't work
Reasons why I think it still can get fixed:
-It stills turns on.
-Battery has ran out a couple of times, so it still charges.
-Windows 8 makes a pulg-in sound when I connect the phone to the laptop.
The phone also keeps rebooting each 6 to 10 seconds, so it is actually a plug-in, and plug-out, and a plug-in, and so on...
It doesn't list anything inside Device Manager.
Some people have tried Dexter's fix for bricked devices, but I think it only works for devices listed at least as QHSUSB_DLOAD.
Mine is not recognized that way... or at all.
That plug-in sound though.
HTC Drivers Installed:
setup_3.1.24.5_htc.exe
HTC_BMP_USB_Driver_x64_1.0.5375.msi
HTC Driver 4.10.0.001.exe
HTC Sync Manager
Click to expand...
Click to collapse
So wait. Why can't you enter? Because it reboots too fast? Can you shut off your phone? If yes do it so and then try to reboot to bootloader. And if it reboots there too every 5 to 6 seconds, you're gonna have a big problem. Within 5-6 seconds you can't hide the rooted state of your device and this also means that you can't return it.
But if you can get to your bootloader and if you can fastboot connect it, I'd recommend using a RUU if you are S-OFF. Otherwise I'd try to reinstall another recovery and from the recovery I'd reinstall a new OS.
Anyways, just try to get to the bootloader and do what I told you to. If my instructions were too unaccurate, just mention or quote me, I'll get back to you.
LibertyMarine said:
So wait. Why can't you enter? Because it reboots too fast? Can you shut off your phone? If yes do it so and then try to reboot to bootloader. And if it reboots there too every 5 to 6 seconds, you're gonna have a big problem. Within 5-6 seconds you can't hide the rooted state of your device and this also means that you can't return it.
But if you can get to your bootloader and if you can fastboot connect it, I'd recommend using a RUU if you are S-OFF. Otherwise I'd try to reinstall another recovery and from the recovery I'd reinstall a new OS.
Anyways, just try to get to the bootloader and do what I told you to. If my instructions were too unaccurate, just mention or quote me, I'll get back to you.
Click to expand...
Click to collapse
First of all, thank you for replying.
On topic.
Phone is actually turned off right now.
Battery died again.
Only way to turn it back on is connecting it to the wall charger and sometimes to the laptop.
But as soon as I do...
1. Phone turns on.
2. Shows the white screen with only the green HTC logo.
3. If it's plugged to the laptop then I hear that "plug in" sound Windows does.
4. After a few seconds phone reboots... and reboots... and reboots... doing the same I just stated.
I also get to hear the Windows "plug-out" sound everytime it turns off to reboot.
Not sure of why I can't enter the boot loader.
This problem started after I decided to turn off my phone while it was installing a custom recovery (Process was being slow and I am OCD like that)
My paranoic guesses are that I screwed it so bad I wiped the bootloader also, but is that even possible?
KomuroXV said:
First of all, thank you for replying.
On topic.
Phone is actually turned off right now.
Battery died again.
Only way to turn it back on is connecting it to the wall charger and sometimes to the laptop.
But as soon as I do...
1. Phone turns on.
2. Shows the white screen with only the green HTC logo.
3. If it's plugged to the laptop then I hear that "plug in" sound Windows does.
4. After a few seconds phone reboots... and reboots... and reboots... doing the same I just stated.
I also get to hear the Windows "plug-out" sound everytime it turns off to reboot.
Not sure of why I can't enter the boot loader.
This problem started after I decided to turn off my phone while it was installing a custom recovery (Process was being slow and I am OCD like that)
My paranoic guesses are that I screwed it so bad I wiped the bootloader also, but is that even possible?
Click to expand...
Click to collapse
I wonder if this is a damaged partition - and it's tricky to solve
@nkk71 what do you think?
stovie_steve said:
I wonder if this is a damaged partition - and it's tricky to solve
@nkk71 what do you think?
Click to expand...
Click to collapse
I made a video, hope it helps.
https://www.youtube.com/watch?v=GMuo-kvIGIc
Suggestions: Mute it :silly:
KomuroXV said:
I made a video, hope it helps.
https://www.youtube.com/watch?v=GMuo-kvIGIc
Suggestions: Mute it :silly:
Click to expand...
Click to collapse
only thing i noticed in the video is your holding volume up not volume down. Volume up plus power will not load the bootloader
clsA said:
only thing i noticed in the video is your holding volume up not volume down. Volume up plus power will not load the bootloader
Click to expand...
Click to collapse
I've tried both.
Here's another one anyways.
https://www.youtube.com/watch?v=1zyA6XGFEpo&list=UUzlEfhRw_dyaJ7aAFpWC7-A
KomuroXV said:
First of all, thank you for replying.
On topic.
Phone is actually turned off right now.
Battery died again.
Only way to turn it back on is connecting it to the wall charger and sometimes to the laptop.
But as soon as I do...
1. Phone turns on.
2. Shows the white screen with only the green HTC logo.
3. If it's plugged to the laptop then I hear that "plug in" sound Windows does.
4. After a few seconds phone reboots... and reboots... and reboots... doing the same I just stated.
I also get to hear the Windows "plug-out" sound everytime it turns off to reboot.
Not sure of why I can't enter the boot loader.
This problem started after I decided to turn off my phone while it was installing a custom recovery (Process was being slow and I am OCD like that)
My paranoic guesses are that I screwed it so bad I wiped the bootloader also, but is that even possible?
Click to expand...
Click to collapse
Hmmm, as the others said this might be really hard to solve.
Most likely this here won't solve your problem but it's better to try it than to just let it be:
Hold your HTC One below a bright lights source and hold the power button for about 15 seconds or even longer. The charging light will light up. Then hold down the volume down button and try different key combinations!
I heard about that this here could get some devices to fully boot after they had been in such a strange loop as your phone is:
A: Hold volume down and volume up button and the power button for about 90 seconds. If this doesn't work, try holding your phone below bright light again
I couldn't watch the second video (it's private) where you pressed the volume down button. But I believe you're right.
@stovie_steve what is the indication for this damaged partition? I can't imagine which partition would lead into a such behaviour.
Anyways.. @KomuroXV just try what I've writtten if it doesn't work, just mention or quote again, I'll try to look up what it could be.
Good luck!
LibertyMarine said:
Hmmm, as the others said this might be really hard to solve.
Most likely this here won't solve your problem but it's better to try it than to just let it be:
Hold your HTC One below a bright lights source and hold the power button for about 15 seconds or even longer. The charging light will light up. Then hold down the volume down button and try different key combinations!
I heard about that this here could get some devices to fully boot after they had been in such a strange loop as your phone is:
A: Hold volume down and volume up button and the power button for about 90 seconds. If this doesn't work, try holding your phone below bright light again
I couldn't watch the second video (it's private) where you pressed the volume down button. But I believe you're right.
@stovie_steve what is the indication for this damaged partition? I can't imagine which partition would lead into a such behaviour.
Anyways.. @KomuroXV just try what I've writtten if it doesn't work, just mention or quote again, I'll try to look up what it could be.
Good luck!
Click to expand...
Click to collapse
Oh... I fixed the private video thing, sorry about that.
I've tried the bright light + power + volume down button combination before but it never managed to make the phone to boot properly.
It did have some little behaviour changes though...
Like... it was more responsive for the button combination making it turn off kind of faster, just to reboot again some seconds after anyway.
Tried it again just now, but still nothing different. :/
Same stuff as before.
I could make another video if you guys wanted to make sure, but it'd be me just pressing the volume down + power under the bright light for nothing but the loop, besides the responsiveness I've told you it seems to get to pressing the buttons.
Anyway, just tell me if making another video would help.
By the way.
Some months ago (Yeah, I have a lot of time dealing with this) I was able to turn it on with or without the charger, now it seems like it's only possible when it's "charging" or connected to the laptop, regardless of bright light or not.
Guess that was because it had charge before, now it doesn't and it's unable to actually charge the battery.
Which would explain why the orange little charging light is off now.
I'm open to any new ideas. :/
Thank you guys for all your support.
KomuroXV said:
Oh... I fixed the private video thing, sorry about that.
I've tried the bright light + power + volume down button combination before but it never managed to make the phone to boot properly.
It did have some little behaviour changes though...
Like... it was more responsive for the button combination making it turn off kind of faster, just to reboot again some seconds after anyway.
Tried it again just now, but still nothing different. :/
Same stuff as before.
I could make another video if you guys wanted to make sure, but it'd be me just pressing the volume down + power under the bright light for nothing but the loop, besides the responsiveness I've told you it seems to get to pressing the buttons.
Anyway, just tell me if making another video would help.
By the way.
Some months ago (Yeah, I have a lot of time dealing with this) I was able to turn it on with or without the charger, now it seems like it's only possible when it's "charging" or connected to the laptop, regardless of bright light or not.
Guess that was because it had charge before, now it doesn't and it's unable to actually charge the battery.
Which would explain why the orange little charging light is off now.
I'm open to any new ideas. :/
Thank you guys for all your support.
Click to expand...
Click to collapse
hey guys, sorry been/am a bit busy lately, so don't get to respond/contribute much
OP, looks like your power button is messed up? (ie it's continually "pressed") you can try to nudge a little, to see if it gets unpressed
after "nudging" a little, don't even bother pressing it, when the phone reboots, just hold voldown to get to bootloader
EDIT: be gentle :silly: :laugh:
nkk71 said:
hey guys, sorry been/am a bit busy lately, so don't get to respond/contribute much
OP, looks like your power button is messed up? (ie it's continually "pressed") you can try to nudge a little, to see if it gets unpressed
after "nudging" a little, don't even bother pressing it, when the phone reboots, just hold voldown to get to bootloader
EDIT: be gentle :silly: :laugh:
Click to expand...
Click to collapse
hey @nkk71, but in what way does that explain the fact that it only boots when the phone is connected to a power source? And he also holds down the powerbutton the first time. I can't find an explanation for this.
@KomuroXV but what nkk suggested is a good idea, but just be very very gentle. I f#cked up my powerbutton pressing it too much. Luckily HTC believed my (altered) story and I got a replacement.
What you can try is to just go with a paper edge between the power button and the Magnesium surrounding then try to much it upwards and downwards, this may help "unstucking" your powerbutton if that's even the case.
I'm gonna test the with my phone how long it takes to reboot if I hold down the power button (will post again in a few min). If it's about the same as shown in your vid, it might really be a stuck power button.
LibertyMarine said:
hey @nkk71, but in what way does that explain the fact that it only boots when the phone is connected to a power source? And he also holds down the powerbutton the first time. I can't find an explanation for this.
Click to expand...
Click to collapse
1) battery drains, he plugs it in -> boom, it turns on
2) it reboots no matter what button combo he tries
3) it's not even staying on the bootsplash long enough (from the video) to consider it a bootloop
it's just a thought, but that's what it looks like to me
(if it were even going slightly further than the bootsplash, or even bootlooping back to bootloader, then it could be something else, it just looks to me as if the power button is constantly pressed)
nkk71 said:
1) battery drains, he plugs it in -> boom, it turns on
2) it reboots no matter what button combo he tries
3) it's not even staying on the bootsplash long enough (from the video) to consider it a bootloop
it's just a thought, but that's what it looks like to me
(if it were even going slightly further than the bootsplash, or even bootlooping back to bootloader, then it could be something else, it just looks to me as if the power button is constantly pressed)
Click to expand...
Click to collapse
@KomuroXV and @nkk71 I mistreated my phone and yeah, seems to have about the same time to reboot.
And yeah, I now saw in the first video he didn't first hold down the power button. So your thesis is very probable.
So yeah only way is to try and get the button unstuck and if this doesn't work I'd return it to the manufacturer. Shouldn't be something you have to pay for. Only bad thing is that if they notice the altered motherboard...
LibertyMarine said:
@KomuroXV and @nkk71 I mistreated my phone and yeah, seems to have about the same time to reboot.
And yeah, I now saw in the first video he didn't first hold down the power button. So your thesis is very probable.
So yeah only way is to try and get the button unstuck and if this doesn't work I'd return it to the manufacturer. Shouldn't be something you have to pay for. Only bad thing is that if they notice the altered motherboard...
Click to expand...
Click to collapse
For a second there I thought it could be this, but it looks like it's not.
I nudged it.
Carefully cleaned with the edge of a paper too.
God, I basically gave a blowjob to that power button just in case there was any dust inside of it.
But it looks like there's not anything.
It was a good theory though.
But still it wouldn't explain, why did it happen just after I interrupted the custom recovery flashing?
Let explain again in case I didn't do it clearly last time.
I flashed a Custom Recovery through fastboot.
I was Unlocked, S-Off, Rooted, everything good.
All went smoothly at CMD screen.
But the process in the phone was being slow and it looked like if it was stuck to me.
Which it wasn't I guess... but I panicked and turned off the phone like at 40% of the install.
Then all this happened.
That broken power button thing would be way too much coincidence.
My theory is that since I was flashing Custom Recovery through fastboot (bootloader) and I interrupted it.
Now, every time it turns on, it tries to log into fastboot and continue the process I stopped.
Just that now.... it doesn't has the files needed to complete it, or maybe just got corrupted.
Since it can't finish that ghost recovery flashing process, it gives error and reboots.... and reboots... and reboots...
Doesn't really look like a hardware problem.
Seriously, it's the most well taken care phone I've ever had.
I bought it a tempered glass screen protector, an UAG case which for me made the phone indestructible.
Still, guess it wasn't silly-owner-proof.
*facepalms*
:silly:
KomuroXV said:
For a second there I thought it could be this, but it looks like it's not.
I nudged it.
Carefully cleaned with the edge of a paper too.
God, I basically gave a blowjob to that power button just in case there was any dust inside of it.
But it looks like there's not anything.
It was a good theory though.
But still it wouldn't explain, why did it happen just after I interrupted the custom recovery flashing?
Let explain again in case I didn't do it clearly last time.
I flashed a Custom Recovery through fastboot.
I was Unlocked, S-Off, Rooted, everything good.
All went smoothly at CMD screen.
But the process in the phone was being slow and it looked like if it was stuck to me.
Which it wasn't I guess... but I panicked and turned off the phone like at 40% of the install.
Then all this happened.
That broken power button thing would be way too much coincidence.
My theory is that since I was flashing Custom Recovery through fastboot (bootloader) and I interrupted it.
Now, every time it turns on, it tries to log into fastboot and continue the process I stopped.
Just that now.... it doesn't has the files needed to complete it, or maybe just got corrupted.
Since it can't finish that ghost recovery flashing process, it gives error and reboots.... and reboots... and reboots...
Doesn't really look like a hardware problem.
Seriously, it's the most well taken care phone I've ever had.
I bought it a tempered glass screen protector, an UAG case which for me made the phone indestructible.
Still, guess it wasn't silly-owner-proof.
*facepalms*
:silly:
Click to expand...
Click to collapse
I'm gonna sleep now, will answer tomorrow evening. I have an important meeting tomorrow.
KomuroXV said:
I flashed a Custom Recovery through fastboot.
I was Unlocked, S-Off, Rooted, everything good.
All went smoothly at CMD screen.
But the process in the phone was being slow and it looked like if it was stuck to me.
Which it wasn't I guess... but I panicked and turned off the phone like at 40% of the install.
Then all this happened.
That broken power button thing would be way too much coincidence.
Click to expand...
Click to collapse
i dont see how flashing / interrupting flashing a recovery could cause that, the recovery is in a different partition than bootloader, so even if you were unable to enter recovery (due to bad flash), you should be able to get to bootloader
but when you say it got stock at 40%, i'm seriously surprised, as flashing a recovery literally takes 2 seconds:
Code:
C:\ADB3>fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
target reported max download size of 1514139648 bytes
sending 'recovery' (9184 KB)...
OKAY [ 1.209s]
writing 'recovery'...
OKAY [ 1.144s]
finished. total time: 2.354s
maybe try covering the light sensors completely, and hold voldown, when it reboots again.... maybe (though i doubt it), it will forego the simulated battery pull
KomuroXV said:
[...]
I flashed a Custom Recovery through fastboot.
I was Unlocked, S-Off, Rooted, everything good.
All went smoothly at CMD screen.
But the process in the phone was being slow and it looked like if it was stuck to me.
Which it wasn't I guess... but I panicked and turned off the phone like at 40% of the install.
Then all this happened.
That broken power button thing would be way too much coincidence.
My theory is that since I was flashing Custom Recovery through fastboot (bootloader) and I interrupted it.
Now, every time it turns on, it tries to log into fastboot and continue the process I stopped.
Just that now.... it doesn't has the files needed to complete it, or maybe just got corrupted.
Since it can't finish that ghost recovery flashing process, it gives error and reboots.... and reboots... and reboots...
[...]
Click to expand...
Click to collapse
How did you turn it off? Did you press the power button very hard/strong?
Did you flash the recovery with fastboot
or did you flash your recovery within rebootRUU and with an firmware.zip ?
Because the method via fastboot (fastboot flash recovery recovery.img) doesn't indicate a percentage. And btw. I had issues with this method too and interrupted the installation several times, didn't cause any problems. To the theory that your phone wants to continue flashing recovery is not true. This isn't possible since your phone should boot correctly and if it wanted to boot into recovery you could prevent that with pressing the vol. down button. That didn't work in your case so I think that this theory doesn't work out.
If you flashed it with a firmware zip, was there another hboot.img that you installed too without knowing/wanting? Because interrupting a hboot flash will brick your device. but if that happend you wouldn't be able to boot your phone. So I think this isn't true either.
i have exactly the same problem, is very strange beacause i was updating my ROM

Categories

Resources