Related
Hi, I have rooted my tab ,no problem. But I read all the posts about EXT4 and kernel flashing needed for flashing roms, but I cannot find a definitive guide on how to flash the kernel using odin or EXT4.
Can anyone help with a small , simple guide on how to do this please?
I've been looking for hours and darent try it without knowing fully how.
Thanks
Stu.
Galaxy Tab UK
Recovery mod installed and Rom backed up.
Havent looked yet but i quick guide would be great if it doesnt already exist.
Sent from my HTC HD2 using XDA App
You can follow the instructions from this thread
http://forum.xda-developers.com/showthread.php?t=925760
Stu308 said:
Hi, I have rooted my tab ,no problem. But I read all the posts about EXT4 and kernel flashing needed for flashing roms, but I cannot find a definitive guide on how to flash the kernel using odin or EXT4.
Can anyone help with a small , simple guide on how to do this please?
I've been looking for hours and darent try it without knowing fully how.
Thanks
Stu.
Galaxy Tab UK
Recovery mod installed and Rom backed up.
Click to expand...
Click to collapse
Sent from my GT-P1000 using Tapatalk
Seen that post , but it doesnt say what to do with odin? As in where to load the .tar file etc.
You flash the Modaco kernel via Odin, if your file system isn't ext4 (which it won't be then you may need to manually reboot your phone - My phone still rebooted automatically coming from a rfs file system)
Once your phone reboots it should enter recovery automatically and you just sit back and let CWM backup / covert your file system to ext4 / restore your rom back on to your coverted file system
(I believe there are instance also when you phone does not automatically enter recovery on reboot, in this situation you will need to manually enter recover after flashing the kernel in Odin - to do this you hold down the power button and volume up)
Another thing worth noting, i had encountered an issue during the conversion process where CWM was not able to restore my existing rom, when this happens you can download a ext4 rom (i.e. modaco rom or overcome 1.1.3) and flash the file via CWM - i.e. you can leave the kernel and try another Rom.
Hope this helps.
thanks bendjlee, but how do I use odin? (where to put .tar file which mode should tab be in etc..).
Stu308 said:
thanks bendjlee, but how do I use odin? (where to put .tar file which mode should tab be in etc..).
Click to expand...
Click to collapse
under pda
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
This is what I get, doesnt work. Should I be in recovery or the phone in normal mode?
I also had "fail" in red in the left had box of odin, my tab is rooted and clockwork mod installed. What is wrong?
You'll need to put your tab to download mode first before connecting to your computer to odin. Turn on the tab with "volume down" held
Stu308 said:
I also had "fail" in red in the left had box of odin, my tab is rooted and clockwork mod installed. What is wrong?
Click to expand...
Click to collapse
Sent from my GT-P1000 using Tapatalk
ahh, will try it that way , but Im sure I tried that. Do I put phone in debugging mode before I go into download mode?
Download mode is different than recovery and debug. It would display an image of an android with a shovel. That is the mode you need to be in.
Even though the question was asked by someone else, these attempts to answer the question helped solve a similar problem on my side. Thanks!
Hi ! I'm really desperate ! I think I did a bad action : I tried to flash my GN with a Samsung STOCK ROM with Odin but I let Re-partition checked ... and now my GN is locked with messages in oddin :
ID:0/003> Get PIT for mapping ..
<ID:0/003> Firmware update start ..
<ID:0/003> zImage
<ID/003> Complete(Write) operation failed
Of course the hard reset tell me that "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" .. that I can't do.
I tried to download again drivers, different ROM ... same result.
I heard about a special cable ... someone knows something about it ?
Anyone have a way I could try to get my GN work ?
Thank you to all !
[Q] [q] help ! Gn locked by odin flash => SOLVED
Hi to all ! Finally I could make ODIN flash my GN with the N7000XXKKA_N7000OXXKK5_AUT Samsung stock ROM.
I had :
1/ change my USB cable
2/ kill KIES processus
after that ... ODIN flash worked fine !!!!
Hi I have galaxy note GT-N7000. I'm currently using CriskeloRom ICS ZCLP6 Rom with kernel version 3.0.15-N7000XXLPY-CL474507
I was doing nandroid backup with clockworkmod and while it was making to backup, the phone turned off by itself. i tried again and it's doing it over and over again... so I tried to put different kernel using odin but when i flash the rom, it keeps saying
<ID:0/008>File Analysis..
<ID:0/008>SetupConnection..
<OSM>All threads completed. (success 0/failed 1)
and when i press start botton again
<OSM>All threads compleded. (success 0/failed 0)
I don't know what I should do next.........I really wanna fix this problem so I can do nandroid backup and try different roms.... please help me!! PLEASE!!
jsindahouz said:
Hi I have galaxy note GT-N7000. I'm currently using CriskeloRom ICS ZCLP6 Rom with kernel version 3.0.15-N7000XXLPY-CL474507
I was doing nandroid backup with clockworkmod and while it was making to backup, the phone turned off by itself. i tried again and it's doing it over and over again... so I tried to put different kernel using odin but when i flash the rom, it keeps saying
<ID:0/008>File Analysis..
<ID:0/008>SetupConnection..
<OSM>All threads completed. (success 0/failed 1)
and when i press start botton again
<OSM>All threads compleded. (success 0/failed 0)
I don't know what I should do next.........I really wanna fix this problem so I can do nandroid backup and try different roms.... please help me!! PLEASE!!
Click to expand...
Click to collapse
Your phone is most likely brick. Try sent it to Samsung service centre.
Thread Closed
Please post a thread once, we dont need duplicates.
Hi
I was on RocketRom V5 and wanted to go back to GB
so i tried to install a stock GB rom using PC odin but it failed in the middle of the proccess
now the phone can only go to download mode
and if I tried to boot it or go to recovery mode it says "Frimware upgrade encountered an issue. please select recovery mode in kies & try again"
now every time i try to install a stock rom using PC odin it fails
and the useless kies is giving me an error like massage in chinese
so if there is a way to install any rom without using kies it will very helpful
max-thamer said:
Hi
I was on RocketRom V5 and wanted to go back to GB
so i tried to install a stock GB rom using PC odin but it failed in the middle of the proccess
now the phone can only go to download mode
and if I tried to boot it or go to recovery mode it says "Frimware upgrade encountered an issue. please select recovery mode in kies & try again"
now every time i try to install a stock rom using PC odin it fails
and the useless kies is giving me an error like massage in chinese
so if there is a way to install any rom without using kies it will very helpful
Click to expand...
Click to collapse
I too am facing the same situation. Hope someone comes up with a solution.
have you made a wipe while on ICS? was your phone booting normaly when you flashed it with PC ODIN?
try version 1.87 ,and if that doen't work then search for version 3 of ODIN
also do note that you should open task manager and shutdown any kies processes (usually two of them) ,kies will stop an ODIN flash ,so make sure to kill it first
i was really excited when i saw a reply i thought it was an answer
if you found a solution please post it here
max-thamer said:
i was really excited when i saw a reply i thought it was an answer
if you found a solution please post it here
Click to expand...
Click to collapse
it is an answer !!
kill KIES and you should have a smooth flashing ,unless you have corrupted your emmc by wiping on ICS of course
MR.change said:
have you made a wipe while on ICS? was your phone booting normaly when you flashed it with PC ODIN?
try version 1.87 ,and if that doen't work then search for version 3 of ODIN
also do note that you should open task manager and shutdown any kies processes (usually two of them) ,kies will stop an ODIN flash ,so make sure to kill it first
Click to expand...
Click to collapse
my phone was ok on rocketrom and it was booting ok until i tried to install a rom using PC odin
and i uninstalled kies completly to avoid any problems
i even tried odin 3 and still no luck
i will try odin 1.87 and reply back
MR.change said:
it is an answer !!
kill KIES and you should have a smooth flashing ,unless you have corrupted your emmc by wiping on ICS of course
Click to expand...
Click to collapse
i was referring to the post above you
as i said i uninstalled kies completely
and i was on speedmod kernel which its developer says he did something to the kernel which should prevent the emmc bug
is there a way to know for sure that i corrupted the emmc or not ?
when you uninstalled kies, drivers may have been affected. reinstall drivers and try again. if you can, use another pc.
Zapped through server hops to XDA forums
just tried PC odin 1.87 and no diffrence
when you uninstalled kies, drivers may have been affected. reinstall drivers and try again. if you can, use another pc.
Zapped through server hops to XDA forums
Click to expand...
Click to collapse
i tried to install the drivers again but it said the drivers are already installed
i think i will try another pc
max-thamer said:
i was referring to the post above you
as i said i uninstalled kies completely
and i was on speedmod kernel which its developer says he did something to the kernel which should prevent the emmc bug
is there a way to know for sure that i corrupted the emmc or not ?
Click to expand...
Click to collapse
yes speedmod is safe ,you have nothing to worry about a brick.
now there could be many things that effect a flash:
1.bad cable
2.running as a standard account (select run as administrator)
3.wrong set of drivers ,to resolve download and install the latest KIES ,then kill it's processes.
4.wrong ODIN version (1.87 recommended)
5.as a last resort you shold flash a pit file (but that's risky)
anyway go to this thread and download ODIN from there and flash a GB ROM
http://forum.xda-developers.com/showthread.php?t=1424997
note that the drivers are included in this thread if you do not wish to install KIES again.
just follow this guide to the letter and you should be fine.
i changed the cable with a brand new cable that was in the original package of the phone
run as administrator
reinstalled the drivers from DR.ketan thread
tried odin 1.85 & 1.87 & the new odin 3 that has a slightly diffrent cyan UI
so im afraid i need to take the risk (BTW, what are the risks ?)
and flash a pit file
so can you please tell the right way to flash a PIT file so i can avoid the risks
your help are greatly appreciated
so anybody has a sulotion for this ?
i have been searching for a solution till now with no luck
max-thamer said:
so anybody has a sulotion for this ?
i have been searching for a solution till now with no luck
Click to expand...
Click to collapse
If you can have it covered under warranty somehow, then try to seek help from SS service. Otherwise, the method in the thread below could be useful.
http://forum.xda-developers.com/showthread.php?t=1661590&page=2
cheers,
i think i will take to samsung service
thank you guys for helping
max-thamer said:
i changed the cable with a brand new cable that was in the original package of the phone
run as administrator
reinstalled the drivers from DR.ketan thread
tried odin 1.85 & 1.87 & the new odin 3 that has a slightly diffrent cyan UI
so im afraid i need to take the risk (BTW, what are the risks ?)
and flash a pit file
so can you please tell the right way to flash a PIT file so i can avoid the risks
your help are greatly appreciated
Click to expand...
Click to collapse
the risks could involve a permanent brick (not even download mod) , can you post exactly what ODIN says?
post ODIN log please
EDIT: maybe by any chance that you flashed an ICS bootloader? if so then it maybe the cause for this ,you should try to flash the official LPf using ODIN ,and if it works and the phone boots then flash Speedmod ics kernel on top of it (before wiping or anything).
here I found this pit file on the internet ,you need to choose your model (16gb or 32 gb) ,it's most likely 16gb ,right?
remember this is a last resort ,so don't use it
i will go with safer method and take it to samsung service :d
thanks anyway youve been a great help
EDIT :
sh*t , its a day off for samsung service
so ill live another day without my Gnote
this is ODIN log
<ID:0/009> Firmware update start..
<ID:0/009> cache.img
<ID:0/009> NAND Write Start!!
<ID:0/009> factoryfs.img
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<ID:0/009> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
what do you think ?? flashing a .pit file would solve anything
and should i load a pit and a PDA file in odin or only .pit file ??
max-thamer said:
i will go with safer method and take it to samsung service :d
thanks anyway youve been a great help
Click to expand...
Click to collapse
if you still have warranty then by all means ,take it to the service center.
if you don't however then you should not give up this easily ,unless you have some cash lying around and you wish to give it to them.
either ways it's your call
good luck
max-thamer said:
i will go with safer method and take it to samsung service :d
thanks anyway youve been a great help
EDIT :
sh*t , its a day off for samsung service
so ill live another day without my Gnote
this is ODIN log
<ID:0/009> Firmware update start..
<ID:0/009> cache.img
<ID:0/009> NAND Write Start!!
<ID:0/009> factoryfs.img
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<ID:0/009> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
what do you think ?? flashing a .pit file would solve anything
and should i load a pit and a PDA file in odin or only .pit file ??
Click to expand...
Click to collapse
weird ,it's failing to flash at factoryfs ,but it's not getting stuck during the operation.
I want you to try two things:
1.try to flash just a kernel ,try this http://forum.xda-developers.com/attachment.php?attachmentid=1068654&d=1337346991
this is the cm9 safe kernel ,if the flash with ODIN goes successful then you can boot into recovery and try to fire a nandroid restore from there
be careful flashing this with ODIN will give you a triangle and count ,so if you still have your warranty ,try to find and flash a stock kernel (which will not give you a triangle).
2.if none of the above works ,then select only the 16 GB pit file and flash it alone ,do not interrupt a pit file flash ,let it take as long as it wants . if you interrupt it then your phone is gone.
after that flash a full GB ROM with removing .pit and unticking repartition.
but I haven't done this before so if you want to go through with it I suggest you wait for someone with actual experience at this.
pit file
Here you go with 16 GB pit file
[Q&A] [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.1.1 TeamWin Recovery Project 10/2
Q&A for [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.1.1 TeamWin Recovery Project 10/24
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.1.1 TeamWin Recovery Project 10/24. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Problem Flashing TWRP to T-Mobile Note 4 in ODIN...PLZ HELP
I am trying to flash TWRP to my Note 4 for T-Mobile via ODIN 3.09 & 3.07 with no luck at all. I have downloaded many different files for TWRP for T-mobile's Note 4 but none of them work at all I keep getting the same error message from Odin. PLEASE some1 HELP me I have never had this issue before with Samsung phones until now and I am completly lost on what to do to get it to work. . Here is the message I get when I try to flash using Odin 3.09 or 3.07:
<ID:0/012> Initialzation...
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> recovery.img
<ID:0/012> NAND Write Start!!
<ID:0/012> FAIL! (Auth)
<OSM> All threads completed. (succeed 0/ failed 1)
I have Auto Reboot & F . Rest Time checked everything else is unchecked.
openrecovery-twrp-2.8.1.0-trltetmo.img.tar is the file I have to flash.
PLEASE PLEASE PLEASE some1 help me get this to work PLEASE.
Ttw626 said:
I am trying to flash TWRP to my Note 4 for T-Mobile via ODIN 3.09 & 3.07 with no luck at all. I have downloaded many different files for TWRP for T-mobile's Note 4 but none of them work at all I keep getting the same error message from Odin. PLEASE some1 HELP me I have never had this issue before with Samsung phones until now and I am completly lost on what to do to get it to work. . Here is the message I get when I try to flash using Odin 3.09 or 3.07:
<ID:0/012> Initialzation...
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> recovery.img
<ID:0/012> NAND Write Start!!
<ID:0/012> FAIL! (Auth)
<OSM> All threads completed. (succeed 0/ failed 1)
I have Auto Reboot & F . Rest Time checked everything else is unchecked.
openrecovery-twrp-2.8.1.0-trltetmo.img.tar is the file I have to flash.
PLEASE PLEASE PLEASE some1 help me get this to work PLEASE.
Click to expand...
Click to collapse
Can you try verifying the md5 of the file from the place you downloaded TWRP from?
How do I verify it
re: odin flash issues
Ttw626 said:
I am trying to flash TWRP to my Note 4 for T-Mobile via ODIN 3.09 & 3.07 with no luck at all. I have downloaded many different files for TWRP for T-mobile's Note 4 but none of them work at all I keep getting the same error message from Odin. PLEASE some1 HELP me I have never had this issue before with Samsung phones until now and I am completly lost on what to do to get it to work. . Here is the message I get when I try to flash using Odin 3.09 or 3.07:
<ID:0/012> Initialzation...
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> recovery.img
<ID:0/012> NAND Write Start!!
<ID:0/012> FAIL! (Auth)
<OSM> All threads completed. (succeed 0/ failed 1)
I have Auto Reboot & F . Rest Time checked everything else is unchecked.
openrecovery-twrp-2.8.1.0-trltetmo.img.tar is the file I have to flash.
PLEASE PLEASE PLEASE some1 help me get this to work PLEASE.
Click to expand...
Click to collapse
Be sure that the "Reactivation lock" in settings>security is Unchecked
and be sure that you have USB debugging enabled before odin flashing.
After doing that you should no longer have odin flashing errors or issues.
Good luck!
bigbiff said:
Can you try verifying the md5 of the file from the place you downloaded TWRP from?
Click to expand...
Click to collapse
How do I verify it?
---------- Post added at 02:25 PM ---------- Previous post was at 02:13 PM ----------
Misterjunky said:
Be sure that the "Reactivation lock" in settings>security is Unchecked
and be sure that you have USB debugging enabled before odin flashing.
After doing that you should no longer have odin flashing errors or issues.
Good luck!
Click to expand...
Click to collapse
Misterjunky i think relock is on in the phone ill disable it and try again i didnt think of that before thanks.
Misterjunky said:
Be sure that the "Reactivation lock" in settings>security is Unchecked
and be sure that you have USB debugging enabled before odin flashing.
After doing that you should no longer have odin flashing errors or issues.
Good luck!
Click to expand...
Click to collapse
Great it took this time thanks alot sir :good:
@bigbiff...VZW Note 4 stock recovery image is here....
http://forum.xda-developers.com/showthread.php?p=56385923
Sent from my HTC Rezound / ADR6425LVW using Tapatalk v2.4.13
nicee 5*
I accidentally wiped my sd card in twrp and now I'm having trouble downloading from a lot of apps. How can I fix this? Would I have to Odin back to a stock firmware to get it back to where it was? Titanium back up and other apps say I have insufficient space, but I know I have a good amount. I reflashed the ROM I've been on and started fresh, but I'm still having issues. Thanks in advanced.
re: titanium backup
paranoid android85 said:
I accidentally wiped my sd card in twrp and now I'm having trouble downloading from a lot of apps. How can I fix this? Would I have to Odin back to a stock firmware to get it back to where it was? Titanium back up and other apps say I have insufficient space, but I know I have a good amount. I reflashed the ROM I've been on and started fresh, but I'm still having issues. Thanks in advanced.
Click to expand...
Click to collapse
Uninstall titanium backup and re-download/install it from the play store then have titanium backup
detect backup location under preferences>backup location in settings then restart titanium backup.
Once you do that it will work fine.
Good luck!
TWRP 2.8.1.0 is not installing on my Tmo Galaxy Note 4
I don't know what's going on guys. I know I am doing everything the right way but for some reason whenever i get back to turning the phone off hitting Vol up/Home/ Power key it takes me to the android boot screen vs the twrp android boot screen.
I am using the img.tar file in odin under the pda option
I have odin set to auto re-boot
i turn the phone off and hit the command
nothing.
Using this twrp in odin
openrecovery-twrp-2.8.4.0-trltetmo.img.tar
if someone can please help me out greatly appreciated.
Is the phone rooted? With bootloader unlocked? Did u use CF auto root?
If so u can flash recovery with FLASHIFY [ https://play.google.com/store/apps/details?id=com.cgollner.flashify] from the play store. Just download the .IMG file for TWRP in the app and let it flash it.
Sent from my SM-N910T using XDA Free mobile app
Thanks for your help man I did end up figuring it out. For some reason the auto reboot was causing the issue. I had to turn that off and manually pull the battery out etc for it to work.
Worked great and I'm now running cm12
thanks for this
I'm guessing twrp 3.0.0 dosent work for the kindle fire (otter) right?
AlbGol said:
I gave you the correct file for what you need to do if you have the n910t, for more specifics look the post above me.
Here is the correct way of installing twrp 3.0 image file, straight from your existing recovery (twrp)
When you boot into your current Recovery 2.8.7.0 and click on Install - Bottom Right you'll see a Image Button - Click on this - The next Screen will show Boot and Recovery - You want to click on Recovery and Swipe to install.
Thats it. (All the phones that I did this were N910T, so was the image file for my device trltmo)
Here is the direct link for twrp 3.0 image file for 910t
https://www.androidfilehost.com/?fid=24407100847294047
Also if u have different model(carrier) just find it here and follow the steps:
http://forum.xda-developers.com/not...-utility-twrp-2-8-1-0-teamwin-t2915588/page44
Click to expand...
Click to collapse
Hey, HUGE problem here. I did this I may have totally bricked my phone. im freaking out.
Please help me
Stuck on recovery booting and cannot even get into download mode. Plugged into comp, I do get a chime .
Is it time to Jtag?
What are my options. Please help
Remove battery, install battery...use button combo to enter download mode and flash 2.87 with odin...
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed/ TWRP 3.0.0-0.trltevzw
manbat said:
Remove battery, install battery...use button combo to enter download mode and flash 2.87 with odin...
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed/ TWRP 3.0.0-0.trltevzw
Click to expand...
Click to collapse
Button combo does not work, goes to recovery booting loop. This is the problem. That's the first thing i did. I haven't seen a hard brick on any of my devices in 12 years.