Used to work just fine on KKA, now LC2 gives a damned bootloop. Any pointers?
joe2316 said:
Used to work just fine on KKA, now LC2 gives a damned bootloop. Any pointers?
Click to expand...
Click to collapse
hmm familiar situation in ics manual change the config they said RomToolbox is cable to change the doi without any issues under ics. Hope this will help you too
mR.fR34ky said:
hmm familiar situation in ics manual change the config they said RomToolbox is cable to change the doi without any issues under ics. Hope this will help you too
Click to expand...
Click to collapse
Thanks for the reply but this is under GB, not ICS...
joe2316 said:
Used to work just fine on KKA, now LC2 gives a damned bootloop. Any pointers?
Click to expand...
Click to collapse
I also used Rom Toolbox when I changed the DPI in my Note running GB. That worked just fine for me. Try it out.
Sent from my GT-N7000 using Tapatalk 2
sotiris20 said:
I also used Rom Toolbox when I changed the DPI in my Note running GB. That worked just fine for me. Try it out.
Actually, that worked Thanks!
Click to expand...
Click to collapse
joe2316 said:
sotiris20 said:
I also used Rom Toolbox when I changed the DPI in my Note running GB. That worked just fine for me. Try it out.
Actually, that worked Thanks!
Click to expand...
Click to collapse
Glad I could help.
Play with the dpi settings until you find the perfect for you.
I recommend 260 for Note. Is a density fairly usable for our screen!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Related
hello.. ive tried flashing this rom in practically any way.. foul wipe and then install.. from cm7 or from stock rom.. after a new flash.. from cm7 without wiping.. anything.. and it started to become tiring.. on 725 bb which is said to have the best battery usage.. when i tried froyo bb i could use my phone for just 3 hours before battery was over.. any solution guys?? or any advise?
Disable Automatic brightness and adjust screen brightness manually to your liking. Should make things better.
DrummerMuppet said:
Disable Automatic brightness and adjust screen brightness manually to your liking. Should make things better.
Click to expand...
Click to collapse
didnt really work.. it still shows usage 88%..
lefterakos said:
didnt really work.. it still shows usage 88%..
Click to expand...
Click to collapse
RC said on G+ that battery usage stats on CM9 were not reliable, so don't trust what it shows:
Ricardo Cerqueira: The power profiles are wrong, those consumption distributions are meaningless.
Click to expand...
Click to collapse
flash an ironkrnl , you will see the difference (at 1,1ghz not 1,5 ^^)
vanhouche74 said:
flash an ironkrnl , you will see the difference (at 1,1ghz not 1,5 ^^)
Click to expand...
Click to collapse
how did you flash your inrkernel?? i tried but it doesnt boot.. or it boots for just a few seconds
lefterakos said:
how did you flash your inrkernel?? i tried but it doesnt boot.. or it boots for just a few seconds
Click to expand...
Click to collapse
this might be a stupid question but did you flash the ICS build of irnkrnl?
owain94 said:
this might be a stupid question but did you flash the ICS build of irnkrnl?
Click to expand...
Click to collapse
haha yes i did i found the problem.. it was an undervolting issue solved in the ironkernels G+
can you tell me what have you done? I have got the same problem and don't know how to do to solve it...
Fuse1 said:
can you tell me what have you done? I have got the same problem and don't know how to do to solve it...
Click to expand...
Click to collapse
just remove the uv96 from the zip file
Sent from my LG-P990 using xda premium
Problem solved...I was using the touch recovery version and it isn't compatible besides that i have installed the latest version of ironkrnL....it could be a problem with the previous one.
Thank you all!
lefterakos said:
just remove the uv96 from the zip file
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
CM9 is not perfect
Hi Guys,
As the Title says, How can I deodex the new ICS rom on the NOTE ?
Thanks!
JazonX said:
Hi Guys,
As the Title says, How can I deodex the new ICS rom on the NOTE ?
Thanks!
Click to expand...
Click to collapse
Do you know to deodex GB rom?If so,No difference apart from changing the api level.I dont remember exactly but I think its 12.
The question must be why do u need to?
vijai2011 said:
Do you know to deodex GB rom?If so,No difference apart from changing the api level.I dont remember exactly but I think its 12.
Click to expand...
Click to collapse
I used kit_deodex
Dont know how to do it Manually.
GR36 said:
The question must be why do u need to?
Click to expand...
Click to collapse
Themeing, Tweaking, and Mods..
Api level is 14 for 4.0.3 and 15 for 4.0.4
Sent from my GT-N7000 using Tapatalk 2
JazonX said:
I used kit_deodex
Dont know how to do it Manually.
Themeing, Tweaking, and Mods..
Click to expand...
Click to collapse
I dont think script will work at the moment for ICS...But I may be wrong
zylor said:
Api level is 14 for 4.0.3 and 15 for 4.0.4
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks Mate, Installing Ubuntu on a Secondary Partition to make an attempt..
JazonX said:
Thanks Mate, Installing Ubuntu on a Secondary Partition to make an attempt..
Click to expand...
Click to collapse
No need to install linux when you are trying using smali and baksmali.
This might help: http://forum.xda-developers.com/showthread.php?t=1441409
chasmodo said:
This might help: http://forum.xda-developers.com/showthread.php?t=1441409
Click to expand...
Click to collapse
Thanks a lot mate !
Hope this helps.
http://forum.xda-developers.com/showthread.php?t=1572266
I'm deodexing right now myself.
hi mate,just went into sammobile and notice that android 4.0.4 by official samsung is out!!!
check it out mate!
http://www.hotfile.com/dl/166119775/d4d70ed/I9100GXXLPY_I9100GDBTLP3_DBT.zip.html
We used this ROM 1 week already mate ^_^
kutomo said:
We used this ROM 1 week already mate ^_^
Click to expand...
Click to collapse
in case someone like me still sleeping
ansonchan said:
in case someone like me still sleeping
Click to expand...
Click to collapse
+1 here
kutomo said:
We used this ROM 1 week already mate ^_^
Click to expand...
Click to collapse
Of course via OTA, not odin...so sammobile was sleeping, not the guys above
Sent from my GT-I9100G using xda premium
ohhh i was sleeping too XD
haha..seem not only me was sleeping;p
Everybody is sleeping, because everybody else was tasting the goodies of jelly bean..
Sent from my GT-I9100G using xda app-developers app
any one tried it?the low fps issue has solved or not?
I can play GTA 3 and temple Run without lags...
heres my direct link mirror
http://jumbofiles.com/wbbbnu4e3r7i
hit thanks maybe?
I just flash this Rom, all function very good, camera focus better than 4.0.3.
trinhhongha90 said:
I just flash this Rom, all function very good, camera focus better than 4.0.3.
Click to expand...
Click to collapse
Dod you know if we can root and flash cmw like on 4.0.3??
rskyline said:
Dod you know if we can root and flash cmw like on 4.0.3??
Click to expand...
Click to collapse
I wish someone could confirm this. really like to taste a new stock flavor, without frame rate lost!
pooyab said:
I wish someone could confirm this. really like to taste a new stock flavor, without frame rate lost!
Click to expand...
Click to collapse
I found a good way to try it, is having the stock 4.0.3 odin flashable, and if something goes wrong or is impossible to root, flash back to 4.0.3
beware the 4.0.4 on I9100 had the super brick bug
not confirmed if its in this release or not
bluefa1con said:
beware the 4.0.4 on I9100 had the super brick bug
not confirmed if its in this release or not
Click to expand...
Click to collapse
What should we do?
rskyline said:
What should we do?
Click to expand...
Click to collapse
Rooting with temporary CWM. It works.
And leave Kernel stock.
Gesendet von meinem GT-I9100G
mblaster4711 said:
Rooting with temporary CWM. It works.
And leave Kernel stock.
Gesendet von meinem GT-I9100G
Click to expand...
Click to collapse
Changing kernel is what bricks the i9100?
rskyline said:
Changing kernel is what bricks the i9100?
Click to expand...
Click to collapse
U can check the thread in the general section for i9100
It has all the info relating the bug
Still I am warning to be on safe side
Nothing is confirmed for this release until some one bricks or Samsung release kernel sources
Sent from my GT-I9100 using Tapatalk 2
Hey if any one want s-voice you can download it...........it's working :highfive:
Here's the link to download it : http://www.mediafire.com/?5013kyysiyd50v8
HOW TO MAKE IT WORKING :
1:Install s-voice as a regular apk
2:install root explorer
3;Then go to system\build.prop
4: Change the ro.product.model and ro.product.device to GT-I9300
5:Then reboot the device.....the s-voice should be working
6:Should work on ics and jb
NOTE: i had tested in jellybean it's working fine for me
Hi
I know and I did for so long and I have gone
Pro100Nikto said:
I know and I did for so long and I have gone
Click to expand...
Click to collapse
IF u had changed the build.prop the s-voice should work :highfive:
IF u haven't u will get a network error :angel:
sorry my english bad I do not know english good
$ay$ not in$talled...do i have to put in $y$tem/app and put permi$$ion,becau$e i cannot in$talled it a$ normal apk
examiner said:
$ay$ not in$talled...do i have to put in $y$tem/app and put permi$$ion,becau$e i cannot in$talled it a$ normal apk
Click to expand...
Click to collapse
Man you need a dollar or what?
Sent from my GT-I9300 using Tapatalk 2
ensoy said:
Man you need a dollar or what?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
i know it$ not po$$ible..im ju$t trying..$o u dont have to react like that,becareful on ur reaction,...i have G$3 al$o..im ju$t trying in my mini..
examiner said:
i know it$ not po$$ible..im ju$t trying..$o u dont have to react like that,becareful on ur reaction,...i have G$3 al$o..im ju$t trying in my mini..
Click to expand...
Click to collapse
no i installed as a regular apk
which rom u r using
anups003 said:
no i installed as a regular apk
which rom u r using
Click to expand...
Click to collapse
im u$ing cm10..the late$t one...
Is it possible to fix the set alarm,play music,set reminder feature . I'm using cm10 latest nightly ( 15/9/2012)
examiner said:
im u$ing cm10..the late$t one...
Click to expand...
Click to collapse
it's working fine on cm 10 just by installing the apk from sd card :fingers-crossed:
anups003 said:
it's working fine on cm 10 just by installing the apk from sd card :fingers-crossed:
Click to expand...
Click to collapse
it $ay$ not in$talled...tried it for 4 time$ ..no luck...
examiner said:
it $ay$ not in$talled...tried it for 4 time$ ..no luck...
Click to expand...
Click to collapse
try from system apps
anups003 said:
try from system apps
Click to expand...
Click to collapse
i dont have enough $pace to do that,...ive got only 15 mb free in my $y$tem/app..i deleted all the ringtone$,etc...
Nice work .... i will try this thanks
For all who wants complete s-voice feature like real s-voice text to speech output..
Go to this link http://forum.xda-developers.com/showthread.php?t=1662663...:):)
Sent from my GT-S5570 using xda premium
for what this??
Im on cm10 and I just installed it as a regular apk without using root explorer. It works great so far
show me something worth my attention
Here's a silly question.. Is there any possible way to use S-Voice in GB? I know that it only works on ICS and JB, but just wondering..
If there's a jellybean emulator for gingerbread the maybe it is possible but still chances are extremely slim
Sent from my GT-I9300 using Tapatalk 2
Hi everyone could someone help me out. My problem is i don't know how i suppose to install Chainfire3d , i've tried to install it regular way but every single time iv'e got a bootloop. Any suggestions?
Anyway thanx in advance.
budensik said:
Hi everyone could someone help me out. My problem is i don't know how i suppose to install Chainfire3d , i've tried to install it regular way but every single time iv'e got a bootloop. Any suggestions?
Anyway thanx in advance.
Click to expand...
Click to collapse
Which Rom & Kernel you are on?
My bad i forgot about it. So i'm on Angry V3.2 Philz Kernel 3.99
budensik said:
Hi everyone could someone help me out. My problem is i don't know how i suppose to install Chainfire3d , i've tried to install it regular way but every single time iv'e got a bootloop. Any suggestions?
Anyway thanx in advance.
Click to expand...
Click to collapse
Chainfire3d doesn't play nice with cm10 or 10.1
I get bootloops too.
Seems to be common for all jellybean roms
Sent from my GT-N7000 using Tapatalk 2
budensik said:
Hi everyone could someone help me out. My problem is i don't know how i suppose to install Chainfire3d , i've tried to install it regular way but every single time iv'e got a bootloop. Any suggestions?
Anyway thanx in advance.
Click to expand...
Click to collapse
READ the DESCRIPTION of CHAINFIRE3D on playstore and you can see it says that the app is NOT for ICS or JB...
click THANKS BUTTON if I helped…
Recognized Distributor™
noteandfound said:
READ the DESCRIPTION of CHAINFIRE3D on playstore and you can see it says that the app is NOT for ICS or JB...
click THANKS BUTTON if I helped…
Recognized Distributor™
Click to expand...
Click to collapse
Not for ics???!!!i used it on ics and now on ultimate v5.1 i have it
Sent from my GT-N7000 using xda premium
sepehrthegreat-iran said:
Not for ics???!!!i used it on ics and now on ultimate v5.1 i have it
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I said READ CHAINFIRE DESCRIPTION ON PLAYSTORE...
I did not made that statement myself...
CHAINFIRE MADE THAT STATEMENT NOT ME SO DO NOT FLAME ME..
click THANKS BUTTON if I helped…
Recognized Distributor™
noteandfound said:
I said READ CHAINFIRE DESCRIPTION ON PLAYSTORE...
I did not made that statement myself...
CHAINFIRE MADE THAT STATEMENT NOT ME SO DO NOT FLAME ME..
click THANKS BUTTON if I helped…
Recognized Distributor™
Click to expand...
Click to collapse
Why do you hate me so much?!or is it that you read my comments in a terorist tune caus im from iran?!
Sent from my GT-N7000 using xda premium
I dont hate you..
I pity for your situation..
I want world peace (Y)
noteandfound said:
I dont hate you..
I pity for your situation..
I want world peace (Y)
Click to expand...
Click to collapse
I have used it on stock ics rooted.
Sent from my GT-N7000 using xda app-developers app
qazibasit said:
I have used it on stock ics rooted.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I used it on pa ics also way back then...
The statement is just quoted from PLAYSTORE description of chainfire3d..
click THANKS BUTTON if I helped…
Recognized Distributor™
Well i think the issue with chainfire3d and note must be somewhere else. I used chainfire3d on Galaxy S 2 and i was on ics and on jb also.It has nothing to do with JB roms it's something else for sure.
Anyway i will keep playing around with it because it would be nice to play nvidia games on uor lovely note.