Last we heard, CyanogenMod 9's interaction with the Galaxy Tab 10.1 line was limited to the variants shackled either to T-Mobile or to WiFi. However, the CM team has been hard at work, and as of yesterday, the following three editions of the 10-inch tablet have been granted access to the CM nightly kingdom: Verizon's Galaxy Tab 10.1 (SCH-I905)
Unlocked WiFi + 3G Galaxy Tab 10.1 (GT-P7500)
Galaxy Tab 10.1v (GT-P7100)
Click to expand...
Click to collapse
Source
Let the download begin. And many thanks for all users who contributed to it.
Link to nightly builds: http://get.cm/?device=p3
Change Log for nightlies: http://changelog.bbqdroid.org/#p3/cm9/next
Flash pershoot's recovery from http://droidbasement.com/db-blog/?p=2487 first. Make sure to download the P3 version
Optionally and recomended: Flash latest pershoot's kernel from http://droidbasement.com/db-blog/
Ok but if i flash my gtab, the camera works??
Thanks
So it begins...
I think we can't be more grateful to pershoot (and also isi, seo and the others 10.1v dev) to make it possible. Without them, we could only have dreamed to see our tab updated at all. Now we'll have almost daily updates...
DannyBiker said:
So it begins...
I think we can't be more grateful to pershoot (and also isi, seo and the others 10.1v dev) to make it possible. Without them, we could only have dreamed to see our tab updated at all. Now we'll have almost daily updates...
Click to expand...
Click to collapse
Couldnt have said it any better, therefore i wont.
Sent from my QW TB-1207 using xda premium
jipils said:
Ok but if i flash my gtab, the camera works??
Thanks
Click to expand...
Click to collapse
No. I think it's based on isi and pershoot work, so the only changes probably will be more CM9 settings
I wonder if any of these are any more stable than the latest from the usual sources that pershoot has been giving us so far. I know it's based on his and Isi's work so I am just wondering
I cant flash it. Error on Cwm
Enviado desde mi GT-N7000 usando Tapatalk 2
osquitar said:
I cant flash it. Error on Cwm
Enviado desde mi GT-N7000 usando Tapatalk 2
Click to expand...
Click to collapse
Flash recovery from this site first.
http://droidbasement.com/db-blog/?p=2487
I guess youve got other version cwm
Sent from my GT-I9000 using XDA Premium HD app
Hi richard.
Thanks a lot for your help. I flashed it and then the gapps from ISI web and it doesn´t work.
Do you know if there specific gapps for this ROM and where can I get them?
Thanks in advance
Flash recovery
Sorry I'm new to all this stuff, how do I flash this file? Odin? and if so do I use the PDA option?
Would be extremely grateful as I've tried a few times but keep getting errors
kaisnowy said:
Sorry I'm new to all this stuff, how do I flash this file? Odin? and if so do I use the PDA option?
Would be extremely grateful as I've tried a few times but keep getting errors
Click to expand...
Click to collapse
The file can't be flashed with odin.
It has to be flashed through cwm, but first you have to unlock your bootloader and aquire root.
Unlock your bootloader with this tut.
http://forum.xda-developers.com/showthread.php?t=1064793
Get root via this....
http://forum.xda-developers.com/showthread.php?t=1079781
Then copy cm9 file to tab and install through cwm.
Sent from my GT-P7100 using XDA Premium HD app
CM9 google apps
osquitar said:
Hi richard.
Thanks a lot for your help. I flashed it and then the gapps from ISI web and it doesn´t work.
Do you know if there specific gapps for this ROM and where can I get them?
Thanks in advance
Click to expand...
Click to collapse
Here are the CM9 ones
wiki.cyanogenmod.com/wiki/Latest_Version#Google_Apps
Hope it helps, if only I could actually flash CM9 successfully lol
osquitar said:
Hi richard.
Thanks a lot for your help. I flashed it and then the gapps from ISI web and it doesn´t work.
Do you know if there specific gapps for this ROM and where can I get them?
Thanks in advance
Click to expand...
Click to collapse
Try gapps from here... Be sure to pick cm9 gapps.
Inst through cwm
http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
Sent from my GT-P7100 using XDA Premium HD app
Wrong CWM
richard2311 said:
The file can't be flashed with odin.
It has to be flashed through cwm, but first you have to unlock your bootloader and aquire root.
Then copy cm9 file to tab and install through cwm.
Sent from my GT-P7100 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks, I already have unlocked the bootloader and gotten root, but I think I may have flashed the wrong ClockworkMod Recovery (i.e the one for the galaxy tab 10.1. What is the correct file? and how do I fix it ie reflash it?
kaisnowy said:
Thanks, I already have unlocked the bootloader and gotten root, but I think I may have flashed the wrong ClockworkMod Recovery (i.e the one for the galaxy tab 10.1. What is the correct file? and how do I fix it ie reflash it?
Click to expand...
Click to collapse
Get the correct recovery from here.
http://droidbasement.com/db-blog/?p=2487
Put the file somewhere on your pc.
The go into fasboot mode and type :
Fastboot flash recovery <path> recovery.img
Sent from my GT-P7100 using XDA Premium HD app
.tar.md5
richard2311 said:
Get the correct recovery from here.
Put the file somewhere on your pc.
The go into fasboot mode and type :
Fastboot flash recovery <path> recovery.img
Sent from my GT-P7100 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks I understand those steps but whats confusing me is the .tar.md5, how do I turn that into a recovery.img?
Thanks for the help so far
kaisnowy said:
Thanks I understand those steps but whats confusing me is the .tar.md5, how do I turn that into a recovery.img?
Thanks for the help so far
Click to expand...
Click to collapse
So sorry youre right this one has to be flashed through odin 1.85.
Go into download mode, start odin and connect tab.
Put.... tar IN PDA and flash.
Sent from my GT-P7100 using XDA Premium HD app
OK thanks so what does this file do? Will it fix my problem of having the wrong clockworkmod recovery?
Sent from my Galaxy Nexus using xda premium
kaisnowy said:
OK thanks so what does this file do? Will it fix my problem of having the wrong clockworkmod recovery?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yes, be sure to pick the gt-p7100 recovery
Do not tick repartition
Sent from my GT-P7100 using XDA Premium HD app
Hey thanks for all the help Richard it all worked out fine
Sent from my Galaxy Nexus using xda premium
Related
Hi, I have a rooted galaxy tab. I recently just installed a custom rom and after, it doesn't boot anymore? It only stucks at the boot screen. May I know what's the issue here? Is it a brick or something? Any helps appreciated. Tks!
it sounds like a soft brick, which isn't too bad at all Just switch your tab over to Download Mode and then flash another ROM that is confirmed working on your device.
A hard brick would be if your tab didn't power on in any way at all no matter what, and that would be pretty bad :/
Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App
bryanqjx said:
Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Yah, mine is the galaxy tab 7 P1000 as well. But mine is not from the US. It's from Singapore.
Sent from my HTC Legend using XDA App
And I wanna gingerbread rom.
Sent from my HTC Legend using XDA App
espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
K. I also came across this roto JME pre-rooted firmware v4. Will this work as well?
Sent from my HTC Legend using XDA App
You need dbdata.rfs
bryanqjx said:
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?
Click to expand...
Click to collapse
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
yappoe said:
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
Click to expand...
Click to collapse
I tried using the dbdata before. But it still doesn't work.
Sent from my HTC Legend using XDA
I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium
priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?
Izachii said:
I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
Did you flash the overcome rom?
bryanqjx said:
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?
Click to expand...
Click to collapse
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?
yappoe said:
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?
Click to expand...
Click to collapse
I haven't tried this process yet cause I am curious whether if its necessary to flash the kernel and the rom. But since its good, I will try it later! Tks btw.
Sent from my HTC Legend using XDA
OMG i did a mistake..
Please tell me is this able to fix or not???
Sure. Mentioned many times, this is another download mode.
Just fully charge your tablet, like 8hrs.
Connect and launch Odin.
Once Odin detect it, quickly flash away with stock Rom.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Sure. Mentioned many times, this is another download mode.
Just fully charge your tablet, like 8hrs.
Connect and launch Odin.
Once Odin detect it, quickly flash away with stock Rom.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Happy to know that...
Wish me luck mate
can u provide me a link to CWM installer?
I make a mistake by flash via odin CWM for tab 10.1 p7510 wifi tablet into p1000
then odin stuck and i removed the cable
Good luck.
Btw is this a P1000 you have? If so, I would recommend restock using overcome gb stock safe v5.
Link is in my signature. Get the pdf guide and start at page 7.
Once the restock is done, you can flash overcome kernel using Odin, also in the guide.
After that you will have cwm recovery.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Good luck.
Btw is this a P1000 you have? If so, I would recommend restock using overcome gb stock safe v5.
Link is in my signature. Get the pdf guide and start at page 7.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
i'd downloaded from here
and wanna flash it via odin..
another request link for the cwm (flashable via odin)
Read my edited reply above regarding cwm
Sent from my GT-I9300 using xda app-developers app
thanx mate... just reply whatever...wanna give thank meter for you
Please search on xda before asking questions.
gogol1996 said:
Please search on xda before asking questions.
Click to expand...
Click to collapse
searched before and find a bit complicated p1000<->p1010
sometimes when u come to a new place, u need someone to guide u
as title,i had tried to flash using speedmod,hydra but still no hope
Where? Are you able to flash a rom using odin? Does it get stuck at a particular stage as well?
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
Where? Are you able to flash a rom using odin? Does it get stuck at a particular stage as well?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
ops,solved, before was flashing without FORMAT SYSTEM, now can already..smooth as butter thanks for your reply too..
yusukezz said:
as title,i had tried to flash using speedmod,hydra but still no hope
Click to expand...
Click to collapse
First flash Philz,than ROM and all shuld be good...
Do that in CWM, use PC/ODIN only for stock or softbrick
Hi, I just got my Galaxy S I900 today.
It has stock froyo 2.2 on it.
I want to flash JB.
Is it possible to just root my phone then flash Jelly bean without getting Gingerbread first?
Thanks.
PelegK said:
Hi, I just got my Galaxy S I900 today.
It has stock froyo 2.2 on it.
I want to flash JB.
Is it possible to just root my phone then flash Jelly bean without getting Gingerbread first?
Thanks.
Click to expand...
Click to collapse
You need to flash a 2.3.6 ROM, then get cwm (custom kernel) then flash cm10.1 three times. First time you flash it, you will get an error so don't worry.
Sent from my GT-I9000 using xda app-developers app
alb3rtt said:
You need to flash a 2.3.6 ROM, then get cwm (custom kernel) then flash cm10.1 three times. First time you flash it, you will get an error so don't worry.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Will do that.
Thanks alot !
PelegK said:
Will do that.
Thanks alot !
Click to expand...
Click to collapse
Don't write thanks, just press the thanks button
alb3rtt said:
You need to flash a 2.3.6 ROM, then get cwm (custom kernel) then flash cm10.1 three times. First time you flash it, you will get an error so don't worry.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Flash 2.3.6, root it using a custom kernel.
But install CM9 first and let it boot before flashing CM10.1 three times. Just to make sure you don't lose your IMEI.
Sent from my GT-P7510 using Tapatalk HD
Soryuu said:
Flash 2.3.6, root it using a custom kernel.
But install CM9 first and let it boot before flashing CM10.1 three times. Just to make sure you don't lose your IMEI.
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
The lost IMEI "bug" is fixed. Even if he does lose it, the .zip backs it up onto the sdcard and he can simply copy that folder (Efs) to the root of his phone.
Dear all,
I'm planning to flash CM 11 ROM by Mclaw in the near future. Since Mclaw recommended flashing using TWRP, I have to replace CWM on my stock rooted SGS3 mini. I've searched entire therads for this topic, some said I had to flash TWRP through fastboot (what is fastboot anyway?), and some said that just flashed TWRP using CWM. It will replace CWM with TWRP. All of those methods are meant to be for different device.
Anyone can confirm one of those methods for SGS3 mini? Or is there another method that noob friendly? I'm just too newbie and afraid to bricking my phone. Thanks.
You don't necessarily need TWRP. I can successfully flash that with CWM.
Sent from my GT-I8190 MaclawStudio CM 11 using Tapatalk
GXGOW said:
You don't necessarily need TWRP. I can successfully flash that with CWM.
Sent from my GT-I8190 MaclawStudio CM 11 using Tapatalk
Click to expand...
Click to collapse
Really? I just want to minimize the risks, since Mclaw studio won't responsible for bricking my phone . Anyone can help me finding the easiest way?
iamsacti said:
Really? I just want to minimize the risks, since Mclaw studio won't responsible for bricking my phone . Anyone can help me finding the easiest way?
Click to expand...
Click to collapse
I'm serious. You can just flash it using CWM without problems. The methods and results are practically the same.
Anyway, the easiest way to flash a new recovery is by using ROM Manager from the Play Store.
Sent from my GT-I8190 MaclawStudio CM 11 using Tapatalk
GXGOW said:
I'm serious. You can just flash it using CWM without problems. The methods and results are practically the same.
Anyway, the easiest way to flash a new recovery is by using ROM Manager from the Play Store.
Sent from my GT-I8190 MaclawStudio CM 11 using Tapatalk
Click to expand...
Click to collapse
Just download the zip file for twrp from maclaw's site and flash that zip with your current recovery..
OK, guys. Thanks for the answers. I'll try and see if it works.
iamsacti said:
OK, guys. Thanks for the answers. I'll try and see if it works.
Click to expand...
Click to collapse
just curious, how did that go ? I have the same issue here.
andreavda said:
just curious, how did that go ? I have the same issue here.
Click to expand...
Click to collapse
you should flash a custom ROM, a custom Kernel, a custom recover.....and after that, reboot to the new recovery and you´ll enjoy it
andreavda said:
just curious, how did that go ? I have the same issue here.
Click to expand...
Click to collapse
Hi guys.
I flashed one recovery using another recovery *dozens* of times on other devices (mostly on the galaxy gio) and now I flashed Maclaw's TWRP using CWM on an I8190n and everything is working perfectly.