Hi,
I have an I897 from at&t but I'm in canada on rogers. Rogers came out with official 2.2 yesterday.
When I try to update using samsung kies it tells me my device uss not supported. Rogers model is I896.
Is there a way to trick kies so I can get the official rogers 2.2?
Sent from my SAMSUNG-SGH-I897 using XDA App
Does your phone have a software update option in the settings menu? The AT&T Captivate does (not that it does anything for us ).
Ya it does but using it tries to connect to at & t server.
I installed the leaked 2.2 but it's also an at&t flavor.
Trying to find a way to get the official rogers version
Sent from my SAMSUNG-SGH-I897 using XDA App
Im looking at doing the same thing too, the question I have is if I use Odin to flash back to My original will that Lock my phone again?
I would like to flash back to my original rom then to Rogers Froyo, but My phone is unlocked and I dont want to Lock it again. ANY Suggestions on how to do this?
PLEASE?
gteh said:
Hi,
I have an I897 from at&t but I'm in canada on rogers. Rogers came out with official 2.2 yesterday.
When I try to update using samsung kies it tells me my device uss not supported. Rogers model is I896.
Is there a way to trick kies so I can get the official rogers 2.2?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
try editing the /System/build.prop to show I896.. Should work
Hi guys, installed the CM9 ROM yesterday, everything seemed to go well. I have installed the google apps, installed all my other apps from the store, wifi working well. However simply can't get any mobile reception.
I have tried searching everywhere trying to find out which modem to install. I have already tried about 4 or 5 from the list, just to see if it works, but nothing is working so far.
I am really hoping that someone has some info on this.
Any help greatly appreciated.
it is not so much of the country as the network?
Optus based or Telstra based, or Vodafone/3 based?
Pennysim on the Optus network.
Jpz should do.
Sent from my GT-I9300T using xda app-developers app
priyana said:
Jpz should do.
Sent from my GT-I9300T using xda app-developers app
Click to expand...
Click to collapse
I had tried that one before.
Ended up wiping all data and cache, etc. and re-flashing ROM and modem.
Now working!
Cheers!
Yes, I have already checked the overcome guide, but what makes me worried is the disclaimer (only GSM based models). I have a GT-P1000 Galaxy tab with Firmware 2.3.3 and I am able to use 3G and I have a simcard in it. I just want to be sure if that guide is really for me. IF you need any extra info about my tab, ask me.
Yeah yours is gsm model.
The cdma has no SIM card slot.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Yeah yours is gsm model.
The cdma has no SIM card slot.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hmmm. All those guides don't include where can I get CWM rly. As I understand, not from Rom manager. But I have failed to find a decent link to it. Well there was one, but it was I think a year old two old. Not sure if its okay.
11 - http://forum.xda-developers.com/showthread.php?t=870690 ( ClockworkMod Recovery for Galaxy Tab )
is this the guide I should follow? I have doubts, because it was last edited 2 years ago. But if it still works, let me know : )
also if so, then am Im not sure if I am the euro, verizon or tMobile tab owner. Where can I check that? I personally live in Estonia and have a mobile contract with Estonian operators. I have no idea where the tablet is from. It's actually my little sisters and the tablet was a present for her. Also the tablet seemed to been used when she got it, so I have no idea where it comes from.
Our tab cwm comes with a kernel. Not separately like in some other devices.
The step that flash the overcome kernel in Odin, that gives you the cwm recovery.
Flip your tab see the back, what models it says.
Your can't be Verizon or Sprint. They are CDMA.
Tmobile or AT & T are just P1000 anyway. Overcome guide applies.
Sent from my GT-P1000 using xda app-developers app
i am unsure if its me or what but everytime i have tried to flash a tmobile rom on my note which should work it slows down to a crawl i cannot even go through the setup process. I have tried via odin and through cwm touch. the next thing i flashed was t879uvlg3 modem and i was wondering if that was the issue and if so what modem should i flash that way i dont have to use kies for recovery cause man..........thats slow. I even made a nandroid backup and it was slow as well so if anyone has had this issue or any ideas please help me
rastlin said:
i am unsure if its me or what but everytime i have tried to flash a tmobile rom on my note which should work it slows down to a crawl i cannot even go through the setup process. I have tried via odin and through cwm touch. the next thing i flashed was t879uvlg3 modem and i was wondering if that was the issue and if so what modem should i flash that way i dont have to use kies for recovery cause man..........thats slow. I even made a nandroid backup and it was slow as well so if anyone has had this issue or any ideas please help me
Click to expand...
Click to collapse
I ran into the same issue boot back to your cwm and flash another modem then reset and you should be good to go, Keep trying modems till you find one that you like
w.working said:
I ran into the same issue boot back to your cwm and flash another modem then reset and you should be good to go, Keep trying modems till you find one that you like
Click to expand...
Click to collapse
This is because the T-Mo Modem should be edited for AT&T...
How do you edit modems?
Sent from my Nexus 7 using XDA Premium HD app
MasterKaiser said:
This is because the T-Mo Modem should be edited for AT&T...
Click to expand...
Click to collapse
How do you edit modems
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
chiikko561 said:
How do you edit modems
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I do not edit any modem, they are already modded, some great people here already did it for us. Since this post it kind of old, I do not remember who did it, but you can search in the thread.
Try going in to mobile network setting and registering in tmobile network.
Sent from my SAMSUNG-SGH-T879 using xda app-developers app
Why would you want to do that? I am using Tmo service on an ATT Note with a ATT Rom and Radio. Runs flawless and I get 30 MBPS download speeds.
HD2FORNICK said:
Why would you want to do that? I am using Tmo service on an ATT Note with a ATT Rom and Radio. Runs flawless and I get 30 MBPS download speeds.
Click to expand...
Click to collapse
Which Att Rom you using and what modem you are using. I have i717 and I tried several rom's and modem's but still cannot find a good match.
If I load Tmo rom's, I can't even install them as the installation gets aborted before mine is i717 device which is att but I thought i717 and T879 same.
Anyways please let us know what's your combination so I can try it out too. By the way I am trying to use i717 with Wind Mobile in Canada which is same as TMO.
Ok, my tablet was an sgh-i957 (lte at&t version), but it was bricked, so i bought a jtag service on ebay, and after i receive the tablet, the boot loader was of the p7320 model, so i flash the tablet with the sgh-i987 stock rom, but after flash, the memory intern memory was just 127 mb (it was the only problem, the other things was working good, even the 3g and 4g), so i re-flashed the tablet with a stock ICS rom, from Norway(Telenor). All was working good, but..Now i have another problem, my 3g is not working (just edge), the stock rom that i use is from Norway (telenor), and the bands that they use for the 3g are 900/2100MHz, but i need the 850 / 1900 bands to make it work in at&t, how can i solve this?, can i flash another modem to back to the 850 / 1900, or make it quad band.
My actual rom is ICS from Norway(telenor), and the baseband is P7320XXLPI
IM GOING TO DONATE TROUGH PAYPAL IF SOMEONE SOLVE THE PROBLEM.
Thanks..
You can flash another radio thru your recovery. It would be a zip file. The problem is finding one. I've tried to search for one but don't see any. I'm also not sure how close the 7320 is to the 7300/7310. You most likely will not brick your device flashing a radio. You run a high risk flashing a kernel or rom. so you might try some for a different device. Just be prepared to odin back to stock. You might even try a radio for the i727, galaxy skyrocket. I successfully did that on my i957. I flashed ucmc1
Edit. If you go to the i727 development forum, go to the stickies there and look for vincom and his rom, radios,etc. There are a bunch to choose from.
Ps, I would recommend the ucli3 skyrocket radio. The i727 and i957 have the same modem chip.
Fyi, this is the radio I flashed on my i957, it's from the i727, http://d-h.st/NWW. It'll work on ics. Don't need to do any wipes, just flash over what you have on your tab now. Particularly don't wipe system!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Alonsonbarrios said:
Ok, my tablet was an sgh-i957 (lte at&t version), but it was bricked, so i bought a jtag service on ebay, and after i receive the tablet, the boot loader was of the p7320 model, so i flash the tablet with the sgh-i987 stock rom, but after flash, the memory intern memory was just 127 mb (it was the only problem, the other things was working good, even the 3g and 4g), so i re-flashed the tablet with a stock ICS rom, from Norway(Telenor). All was working good, but..Now i have another problem, my 3g is not working (just edge), the stock rom that i use is from Norway (telenor), and the bands that they use for the 3g are 900/2100MHz, but i need the 850 / 1900 bands to make it work in at&t, how can i solve this?, can i flash another modem to back to the 850 / 1900, or make it quad band.
My actual rom is ICS from Norway(telenor), and the baseband is P7320XXLPI
IM GOING TO DONATE TROUGH PAYPAL IF SOMEONE SOLVE THE PROBLEM.
Thanks..
Click to expand...
Click to collapse
If i restore by odin with a stock firmware, the modem can be restored too?
Yes. Odin will put the stock firmware and radio back on. I'm pretty sure the i727 radio will work. It definitely does with i957 firmware. Just not sure with the 7320firmware you have. But its more hardware related than firmware and you have the right hardware.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
Yes. Odin will put the stock firmware and radio back on. I'm pretty sure the i727 radio will work. It definitely does with i957 firmware. Just not sure with the 7320firmware you have. But its more hardware related than firmware and you have the right hardware.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
can you give a link or a guide of how install the i727 radio?, thanks.
Alonsonbarrios said:
can you give a link or a guide of how install the i727 radio?, thanks.
Click to expand...
Click to collapse
You're on the stock rom and recovery right now? You don't have a custom recovery, cwm or twrp, installed right?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
You're on the stock rom and recovery right now? You don't have a custom recovery, cwm or twrp, installed right?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Im on stock rom and recovery.
;
Alonsonbarrios said:
Im on stock rom and recovery.
Click to expand...
Click to collapse
The first step will be to put a custom recovery on your tab. This file is twrp, http://d-h.st/fqw. Download it on to your computer. You'll flash it with odin. You install it just like the stock rom ie, run it in PDA with only auto-reboot and f.reset checked.
Note, this twrp file its for the i957. I'm not sure what it will do with your 7320. Partitions may have been changed and you may run into the same problems you did when flashing the i957 rom.
Edit: I was able to find cwm recovery for the 7320, http://d-h.st/Wcv. This might work better.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
;
The first step will be to put a custom recovery on your tab. This file is twrp, http://d-h.st/fqw. Download it on to your computer. You'll flash it with odin. You install it just like the stock rom ie, run it in PDA with only auto-reboot and f.reset checked.
Note, this twrp file its for the i957. I'm not sure what it will do with your 7320. Partitions may have been changed and you may run into the same problems you did when flashing the i957 rom.
Edit: I was able to find cwm recovery for the 7320, http://d-h.st/Wcv. This might work better.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Ok, let me try this nigth, there is a risk of brick installing a custom recovery?
Alonsonbarrios said:
Ok, let me try this nigth, there is a risk of brick installing a custom recovery?
Click to expand...
Click to collapse
Any time you flash something there is a risk of brick. But recovery does not mess with the partition tables. I think worst case it didn't install and you might have to odin the stock rom
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Any time you flash something there is a risk of brick. But recovery does not mess with the partition tables. I think worst case it didn't install and you might have to odin the stock rom
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
ok, its done , what is the next steep?, thanks.
Alonsonbarrios said:
ok, its done , what is the next steep?, thanks.
Click to expand...
Click to collapse
Can you get into recovery? Next step is to download a radio onto the tab. Put it were you'll know where to find it. You'll boot into recovery and then choose that file to install. Don't do any wipes, just install/flash it. Reboot and then check your baseband. Should be good to go from there
Which recovery did you end up installing? Cwm or twrp?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Can you get into recovery? Next step is to download a radio onto the tab. Put it were you'll know where to find it. You'll boot into recovery and then choose that file to install. Don't do any wipes, just install/flash it. Reboot and then check your baseband. Should be good to go from there
Which recovery did you end up installing? Cwm or twrp?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
cwm, where can i download the radio file?, you did the same process for you i957?
Alonsonbarrios said:
cwm, where can i download the radio file?, you did the same process for you i957?
Click to expand...
Click to collapse
Yes, I have the i727 on my i957. If you do a few post up I provided a link to the radio I have on my tab.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
yes, i have the i727 on my i957. If you do a few post up i provided a link to the radio i have on my tab.
Sent from my samsung-sgh-i727 using xda app-developers app
Click to expand...
Click to collapse
have you any issues with the i727 radio?, like battery drain or something else?
Alonsonbarrios said:
have you any issues with the i727 radio?, like battery drain or something else?
Click to expand...
Click to collapse
No it's working fine. I see no difference using it. The radio in the i957 is the same as the i727.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
HiIf you got everything set up, goto settings, wireless and networks,more,mobile networks, access point names. If you don't have a att pta choice you'll have to setup a new apn. I had a broadband only. In the upper right hand corner there should be three stacked boxes which is the settings icon. Click that. Choose new. There will be a number of options to input information. The following is what to put in them. I'm only giving you the ones you need to change the others are left as none
Name. At&t pta
APN. pta
MMSC http://mmsc.mobile.att.net
MMS PROXY proxy.mobile.att.net
Mms port 80
Mcc 310
Mnc 410
Apn type default,admin,fota,mms,supl,hipri ( Note commas)
Click the settings icon again and then save
I just set this up on my tab and it works
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Are you having any luck with this. I'm getting 4g lte with the i727 ucmc1 radio on my tab.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app