hello all
i have installer the v6 rr, from rooted GB. Work fine since i have installed the S3 thème... The theme don't work, and now the phone reboot every time.
I have reflashed, but the GNote continue to reboot after few seconds.
I can't flash a backup or my GB rom, the phone start ever with rocket rom ICS.
Edit:
Now the GNote don't reboot but freeze after few seconds of using. I can't flash nothing with CWM, the flash never end
plz help me
I think the problem comes from "system"
I can't wipe it, and the back up block when arrives on "system"
I can't flash anything, block when arrives on "system"
You lost root, flash gb with PC odin,
nice greetings
hello and thank you for your answer
I finally succeeded! I found an old backup 2.3.6 GB, I reinstalled using CWM. It did not work but it gave me a red CWM with which I was able to reinstall everything. The CWM was red-root.
Thank you for your help.
Related
My phone was bricked yesterday. Then I used SMF to recover, so I turned back to v10a. (from smart flash tool)
Installed Rom manager rooted and installed marvel rom.
Then I tried miui 2.1 rom.
Then i tried to restore my backup(marvel) what i did with rom manager. Phone bricked again.(Blue screen on android)
Then I used SMF to recover again. --> v10a.
Now in rom manager pressin flash cwm button in menu but nothing happens. I rooted phone. Root is workin well in other programs like Titanum. Tried reboot into recovery causes factory reset bcs of cwm i think.
Any way to solve this problem? Or can I install zipaligned rom like marvel, zeus without cwm? Like S/E tool. Power + volumeUp...
Did you do all the wipes before flashing the rom?
Didn't you missed any step?
I cant see even recovery menu. To wipe data/dalvik.
I coulnt flas cwm, so when Im trying to do reboot into recovery via Rom Manager, skips that menu(controlled with volume and power buttons dont know the name) and v10 is booting with factory reset.
Do you have an internet connection when trying to flash cwm?
Trolling in the deep
Just root it again, reboot, install busybox, reboot, install cwm and all should work just fine
Sent from my LG-P970 using Tapatalk
Yes I had internet. I installed Rom Manager from market.
I will follow this link. It gives you offical 20o Rom rooted and touch version of cwm. Hope it will work for me.
And I realized that I really missed LG's UI.
http://forum.xda-developers.com/showthread.php?t=1480392&page=20
You probably forgot "wiping" before restoring your nandroid. Any this shall be a lesson. From now on you won't forget.
had the same problem before, i always had a bug installing CWM, caused factory reset everytime , but when i downloaded it again it works well..
Pondera said:
You probably forgot "wiping" before restoring your nandroid. Any this shall be a lesson. From now on you won't forget.
Click to expand...
Click to collapse
I've never wiped before restoring a nandroid, and believe me I've flashed my OB a lot while i was debuting my Lezo mod.
Trolling in the deep
I solved the problem. Now I have offical 20o ROM offical and rooted. Happy with that. Until stable CM7 or MIUI release I will stop trying ROMS.
Hi guys
Recently I installed CM10 jelly bean coming from CM9, everything worked well untill i realised that I didnt do a back up for my apps.
I had done a nandroid back up before coming to CM10, so i decided to go back to cm9 and get my apps back. This came up with an error.
So i thought it didnt work because i was on cm10, i downloaded cm9 again and installed it.
Nandroid back up worked, but now phone will not turn on samsung galaxy s screen just flashes.
I cant get into recovery only download.
Please help!
Hey
No issues...just downgrade to 2.3.6 using odin (Link Given Below) & root it..
Then flash CM9..reboot..
after the first boot goto CWM using the 3-button combo and restore from your nandroid backup..
Done..
Before flashing stock rom, download the newest Semaphore kernel and flash it using Odin (only PDA file, repartition NOT ticked). It may boot properly or at least it will get you to CWM
Cool123454 said:
Hi guys
Recently I installed CM10 jelly bean coming from CM9, everything worked well untill i realised that I didnt do a back up for my apps.
I had done a nandroid back up before coming to CM10, so i decided to go back to cm9 and get my apps back. This came up with an error.
So i thought it didnt work because i was on cm10, i downloaded cm9 again and installed it.
Nandroid back up worked, but now phone will not turn on samsung galaxy s screen just flashes.
I cant get into recovery only download.
Please help!
Click to expand...
Click to collapse
I had same issue when I flash JB Rom in first time.
When I feel ICS is better than JB(in this moment,I know JB will keeping improve).
FYR,my way as below to back to ICS and everything is come back.
1. In to recovery
2.do a 3wipe
3.falsh cm9(what you want),when flash completed reboot system.
4.Into desktop and run untill system is satble.
5.reboot phone to recovery
6.make a nadroid backup now
7.reboot phone.
8.reboot to recovery
9. restore previous backup data
final get a beer to celebration .
4.
Thanks guys solved it
Hi there.
I am trying to install 4.1.1 Rom, and I've got this problem, no matters which rom I choose. Here are the steps I follow:
1.- Install Official 2.3.6 firmware with Odin
2.- Install Clockworkmod with Odin
3.- Go into Recovery Mode and follow the install instructions from the ROM (wipe data..., install from sd card)
4.- And here it goes. I got "Samsung Galaxy Logo - ROM Logo - Installation init" again and again. The installation shows log messages that I don't have enough time to read (something about E unknown, or can't mount. I've tried flashing with dbdata.rfs.tar, but with no luck)
Any help? Thanks in advance.
Reflash you have to flash twice and also I recommend flashing on top is cm not GB as it seems to stop imei issues
Sent from my Awesome I9000 running Slim Bean
Keep pressed the Recovery Combo until you see the Samsung Galaxy S first screen. It will force to enter Recovery mode.
Then wipe again and reflash
Instead of directly installing clockwork mod, install the cf-root kernel instead, which gives you root and CWM. That's what I normally do anyway.
He/ She doesn't need too there flashing straight to another ROM don't need root
Sent from my Awesome I9000 running Slim Bean
Thank you all for the replies.
I'll try them tonight and I'll let you know if it works out
It does that to me everytime I want to upgrade frome Gb to ICS or ICS to JB
I pull out the battery to stop the bootloop, then put it back in and get in recovery mode with three-buttons combo, then flash again the rom, it shouldnt bootloop again.
I started with last solution (remove battery and flash rom again) and it has worked out! The thing is that after removing the battery and flashing it again, "another" recovery mod is loaded and then it all goes perfect. So, thanks all for the help!
Yes as it changes the partition table and needs a different recovery to handle it properly
Sent from my Awesome I9000 running Slim Bean
Just got my Galaxy S back from my Mum today (After I bricked it and sent for repair) she got a note2 omg... Decided to flash a custom rom..
Here goes..
First I followed this guide completelyhttp://http://wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. After I flash the CM 10, my recovery was upgraded to v6.0.1.5 after reboot. But I cannot get pass the recovery. I will have the cm boot animation, then back to recovery again. Tried reflashing the rom, doesnt say any errors but still gets stuck at recovery.
Then I went thru the method at the wiki.cyanogenmod again and successfully flashed cwm recovery 2.5 again. Tried flashing the CM10 rom again but this time round, It shows a long error message ending with "status 7"
I am still able to go into download mode.
Was on stock unrooted 2.3.3 DXJV9.
I made the super no.1 noob mistake of not making a backup........... But, why is rooting and flashing of this phone so hard.....
Pls, any help is greatly appreciated.
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
It will work
scpion said:
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
Click to expand...
Click to collapse
When u see red error message in stock recovery........u just wipe cache and reboot.......it will work.....
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
try this
scpion said:
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
Click to expand...
Click to collapse
U just use GB jw4(your region) ROM (don't use single file like PDA).........you use files separately like this [PDA,phone,CSC,pit(512 or 513)]...............use Odin 1.85 for flashing files......,when u complete the flashing it automatically reboot to fulfill the flashing...........then also it gives red error means........ clear only wipe cache and don't clear wipe all data...........reboot your system..... I think this will work for u...........:fingers-crossed:
Thanks. Have it solved. Flashed with another rom with seperate files. I was using the the all in one previously. Got it to run CM10 nightly though till now still not too sure how... But, I m real happy now. It works great so far and I couldnt understand why Sammy refuse to roll out official ones even for 4.0..
Still trying to figure out how to root, flash SGS though.. I have done so for many other device but by far,... this phone is the most complicating....
Aj rocker root
By processor only we not getting stock ICS rom but we getting custom ROM by hacking processor.............
For rooting the ROM u want to be in stock GB ROM like 2.3.5 or 2.3.6 and then u want to download this file(http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip)............. after download u want to open Odin 1.85 and select PDA then choose the downloaded file...........select start to flash the file.........reboot and enjoy the root bosssss......if u like this press thanks:fingers-crossed:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Try to see if you can flash another custom Rom, if that works then it could be that your files are corrupted..
Have you stated your problem over at CM forums..
# Sent from my blazing slimbean SGS i9000 using Tapatalk 2 #
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
Most times from GB to JB u have 2 flash custom 2, 3 times. So its normal when flashing custom the first time it takes u to bootanimation and hangs (take out battery and go to recovery with 3 button combo and flash again till it says install is completed) or directly into recovery.
If u wanna flash other jb rom just full wipe and flash new custom. Make sure u make a nandroid backup so u can go back easily
Hi i have the i9001, I rooted the phone earlier and all was fine, I then went to install cwm via odin using the 2 files and it flashed them and the phone rebooted back into android where it then said pass on odin even though it timed out? i tried booting into cwm and was succesful so thought nothing of it and backed up my rom and then flashed real rom.
and now my phone will only boot into cwm and thats it and after while will turn off and reboot into cwm and it will keep doing this.
I have no sd card installed. and i still have the problem when i restore the stock rom.
Any help guys as this isnt my phone?
This happened to me on my I9000 so might work. My solution was to wipe data/cache partition/dalvik again in cwm, re flash new ROM and reboot, if back into cwm then repeat. Took me 3 repeats then booted fine. Happened as I upgraded from stock GB 2.3.6 to CM10.
Sent from my GT-I9000 using xda premium
Yes that normal if you want to upgrade from GB zu JB. Because of first the change of the kernel respectivly the change to new CWM, and then for the new partitionlayout, you have to flash 2 or sometimes even 3 times the rom of your choice and then it should boot....!