[Q/SOLVED] CM9 flash fails on checking state of bml / mtd - Galaxy Tab Q&A, Help & Troubleshooting

Hi, first post here so if I screwup any of the etiquette please tell me.
Ok, so I've had my P1000 for about two years now, no contract, not locked to sprint / verizon etc.
I had 2.3.3 at the start, but after seeing mannnny people flashing to ICS successfully I had to give it a go.
Attempted to flash using overcome kernel for CWM, failed and I had to odin back to 2.3.6 (couldn't find a 2.3.3 rom).
I kept it on 2.3.6, but I was unhappy and so am trying again:
It's important to know that I am now on a mac, so will not had access to odin, and instead am forced to use heimdall. Please don't post any odin specific instructions.
In order to get CWM I had to flash the overcome kernel, which includes the recovery mod.
I successfully used heimdall for this, following a specific instruction guide.
I then downloaded "cm-9-20120703-NIGHTLY-p1.zip" from get.cm, and copied it to my externalSD on my gt.
Booted into recovery, wiped all data/factory reset, wiped cache, wiped dalvik, and went to install form an externalSD.
I chose my file, and the installation / flashing (not sure as to the terms. ) began.
It went through a few messages, but however once it said "Checking state of BML/MTD" it reboots instantly and shows the cm startup for about five seconds before going into recovery. Always does this on startup, no way to change.
The only way to fix this is to go into recovery and wipe all data, but this leaves me on my 2.3.6 rom.
I have NO idea what's happening, and I can't use most guides due to them being odin specific.
If anyone can assist me, please do.
Don't link to any odin threads, and don't tell me to search, for I have been doing so for eight hours.
Cheers,
Zero
EDIT: SOLVED!!!
After flashing once it failed at BML/MTD, so I opened recovery and flashed from "internal sd". Worked a charm, now installing gApps.
Cheers for helping Priyana!

that is call boot loop.
Just boot to recovery and flash it once more
it is quite documented.
About etiquette, post [Q] in Q&A subforum, not general

priyana said:
that is call boot loop.
Just boot to recovery and flash it once more
it is quite documented.
About etiquette, post [Q] in Q&A subforum, not general
Click to expand...
Click to collapse
That's the thing - when I boot to recovery after flashing (and failing) CM9, it is a different sort of recovery and doesn't allow me to install from an externalSD.
Cheers for replying,
Zero

just the name change.
the internal and external got swapped around in that newer recovery

priyana said:
just the name change.
the internal and external got swapped around in that newer recovery
Click to expand...
Click to collapse
As I just noticed.
Installed PERFECTLY!
It's up and running - however I can't see a market?
Cheers,
Zero

You didn't flash gapps.
Didn't you read the instruction?
Sent from my GT-P1000 using xda app-developers app

priyana said:
You didn't flash gapps.
Didn't you read the instruction?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I gave up on instructions after five hours of them failing.
Reread now and just about to reflash with gapps
Cheers,
Zero

Yeah. Believe it or not, early adopter has advantages because we have read up all!
Sent from my GT-P1000 using xda app-developers app

Yeah
Works so well, already have tapatalk and all gapps are working perfectly.
And the instructions - I was following them perfectly, but they did not go in depth when it came to reflashing with the newly installed rom-manager of cm9.
All works perfectly now, thanks for your help
Sent from my GT-P1000 using Tapatalk 2

I've got this exact issue coming over from Frankenclean 2.8 on the samsung fascinate. I decided to update my rom as it was falling behind the 'curve' if you will.
I'm now stuck at a bootloop "samsung" and "S-cyanogen(mod)" screen. they just go back and forth. I'm following this http://forum.xda-developers.com/showthread.php?t=1238070 to the letter and still getting the issue. I've tried flashing a newer kernel that is for 4.x.x builds and no luck.
When I install or attempt to install cyanogen10 it fails on the bml/mtd check and it just reboots to those two screens.
I followed the 'fix' at section 9 but haven't had any luck getting cyanogen to install... I'd really appreciate a little help, ideas, questions, anything.
I know it's an older device, I'm just hoping someone out there with more dev knowledge than I possess "read: none" can help me out.

bump...
Got it to boot into a stock rom, but have 0 luck getting my nandroid to load up and be functional using CWM 2.4 (red). Which is what I made the recovery with.
Might end up with a stock phone if I can't figure it out, I don't mess with roms often.
Luckily I do have titainium backup so all my apps are saved. Just sucks to not have a sleek rom anymore. Not to mention I want jellybean. Any help is appreciated!

fixed it, 4.1 didn't like my phone, got hellybean 4.2 on it without a problem .
Only issue is that google voice to text doesn't work, nor google search.

Related

[Q] Cyanogen 7 boot looping after flashing gapps

Hello, so yes as it says in the topic. I downloaded gapps for desire while having captivate and i flashed it. I didn't realize that after i was stuck in the boot loop. I'm a huge noob in this, i got this phone yesterday but somehow managed to get cyanogen to work on it. Please help me out somehow. Is there any way to get my phone back to stock rom from this? Btw I can open recovery mode, and download mode. I was trying to master flash while in recovery but it didn't work. So since i can't get the phone to boot up idk what to do. Thanks, and help me out please.
Recovery
Mounts and storage
Format cache, system, data
Flash cm7 initial again
Factory reset
Boot
Odin to get back to stock
Sent from my SGH-I897 using XDA Premium App
I've done that few times, still the same thing. I have no idea why.
#edit#
trying the new method that u just posted up
#edit2#
worked! thanks a lot man!
Please post in the CM7 sticky at the top of this forum AFTER you read through it and see if this issue has already been corrected. Also, try reading the actual CM7 thread in Development forum as there might be help in there.
What he said

[Q] SOS please!!!! Overcome1.4.4 Installation Failed

Anyone please i need help!!!!!
so here is the scenario...
i flashed my asian galaxy tab to overcome1.4.4
i followed the pdf version of its install instruction...
i flashed over to JME-stock-safe via odin... ok PASSED!!!
then i flashed the kernel... ok PASSED
then upon installing the Overcome ROM 1.4.4 it stucked up to Installing new system in the CWM...
So i started back to the first step to redo the process
still no luck...
i tried it so many times still no luck...
what should i do now...
please help me out guys....
You say you flashed the overcome Kernel, did you get the sexy robot voice during the EXT4 conversion? What error are you getting IN CWM when it fails?
Sounds to me like you didn't let the system do it's conversion before you tried to flash the new ROM.
My advice would be to reflash the kernel, and let it boot after you have done so. Reboot into recovery and flash the ROM.
@btyork
yes i did hear the sexy robot converting and it even reboots at its own
then i followed the steps in installing the overcome room...
i even get to the point where it says " Installing New system"
then i've waited for it to finish..
but... i've been waiting for about an hour... so then i decided to redo the process to the top ( reinstalling again the JME-stock-safe) .... OK PASSED again
I did install the overcome kernel.... OK PASSED again
heard the sexy robot converting....
but now it didn't boot on its own...
i've been waiting again for about an hour then nothing happens...
its stocked up to " GALAXY TAB" screen
i didn't run the bootloader patch in the first placed though...
is it something connected to a signed bootloader???
what else can i do????
It may indeed be the bootloader, although I doubt it if you got the kernel installed....
Did you repartition with the hidden.pit file when you went back stock?
Sent from my GT-P1000 using XDA Premium App
hey buddy we can help u fix ur problem but u hav to ask it on the thread u got the rom from.... mods close this thread please
Try recovery mode, then wipe all the data and reboot.
Sent from my GT-P1000 using XDA App
If you are still able to enter recovery mode and you were wise enough to create a nandroid backup before you flashed overcome you could just use the recovery to get back to your phones state just before you flashed overcome. Sounds maybe asif your zip file may have been downloaded wrong or something ... that's why its also always a good idea to check the md5 of the Rom before you flash it ...
Sent from my Desire HD using XDA App
you probably tried this but just checking, did you try powering off, for some reason after the install mine just hung...it took 2 or 3 poweroffs to get it to start booting...been fine ever since.

[Solved] Recovery 5.0.2.6 samurai..........

Ive got a stock 2.2? froyo captivate and did the new [Guide] How To flash Captivate ROMs from Stock by TRusselo and when i go into recovery i cant access external sd. I put the latest nightly and gapps on the root of sd card and for some reason I cant see it? I did a clean wipe and everything. Is there something wrong that I'm doing. I've mounted everything and still nothing.
Read the instructions again INTERNAL SD not EXTERNAL and you can access it, browse sdcard to /external_sd folder, it takes you to your external sd.
you mounted what? why? dont.
BUT YOU CANT FLASH FROM EXTERNAL SD!!!!
thats why the instructions say INTERAL SD
So instead of downloading through the browser.....I'd like to move the new nightly and gapps on internal memory with a pc transfer....where would i put it in? so that CWM can see it? Thxs man. I appreciate it. noober here. htc aria was a breeze to root and flash custom roms, I'm not use to this puppy.
ANYWHERE internal sd in the root, or any folder (except external_sd)
what browser are you using? the stock brower downloads to sdcard/downloads not sdcard/external_sd/*whatever*
if you downloaded with stock browser it should be there... not in root. unless you moved it after.
Thanks so much..... I found the files I needed but when I try to flash nightly it gives me this craziness....what's going on! Thxs for the help though.
edit: Did a factory one click by odin.
seems like an error with the zip file. try a nightly from a day or two before.
The build prop doesn't match the built asserts in the Zip, they have to match for it to flash... what ROM are you currently on?
Sent from my I897 using xda premium
that would make scene by the error. hmm he said he went to stock odin one click...
which odin one click?
Maybe he just did that...
Sent from my I897 using xda premium
So I did the one click to revert back to stock. Then I did a one click root and now have SU. 10 hours later and a freakin home made jig that I've made i'm still on 2.1 with root. Please for the love of God I'd like to install current nightly of cm7 and CWM. There are soooooo many ways I've read to install. Now from you pro's can you hook me up with some links or direction to get this going. I've literally killed my Saturday reading my a$$ off. Thanks guys for replying to my lame noobness.
tommyguns818 said:
So I did the one click to revert back to stock. Then I did a one click root and now have SU. 10 hours later and a freakin home made jig that I've made i'm still on 2.1 with root. Please for the love of God I'd like to install current nightly of cm7 and CWM. There are soooooo many ways I've read to install. Now from you pro's can you hook me up with some links or direction to get this going. I've literally killed my Saturday reading my a$$ off. Thanks guys for replying to my lame noobness.
Click to expand...
Click to collapse
Just clear ROM managers data and then flash the original Captivate CWM not MTD and the reboot into recovery... reinstall packages 2 times, and flash in CWM
Sent from my I897 using xda premium
Thanks for the fast reply. I bought ROM manager premium and will try it out. Install twice I guess to be on the safe side right? Thanks again. My wife hates my life right now being i've spent all day doing this. So i'm down to try anything on her cappy at this point.
Not "to be on the safe side"...the first time you choose reinstall packages in stock recovery it'll boot back into stock recovery, then reinstall packages again and it'll boot into cwm.
yeah thats a must do.
So i've cleared cache and selecting captivate recovery galaxy s 2.5.1.x booted into recovery ROM manger and did reinstall twice and got this.......I don't understand why i'm getting this.
Edit: I got it to work! I kept trying to go through the recovery from ROM manager after installing and it hung up a couple times. Then when selecting install packages with which I did it twice...it was in cwm 2.5.1.7. Installed nightly after full wipe a couple times and it boot looped. Then if I remember correctly I pulled battery booting into recovery, the 3 button way. it booted into Cwm 5.x.x.x. What the heck!!! That was a fun ride, why did it do this? Anyways, glad to join your guys community. you guys are awesome. Thanks buttons hit. changing first post and thread to.....solved.
When you flashed the nightly it contained a kernel with cwm 5 baked into it.
from what i have heard sometimes the cm install needs to be done twice.. too. i dunno dont mess with cm7
Sorry
Hello Guys, Just Found this thread after messing up with my Galaxy S Captivate :| I Unintentionally copied my rom in EXTERNAL SD card and Proceeded further but when I got in Download mode I can't Locate my Rom Zip and I tried Everything as mentioned such as wipe & etc... but Now My Phone is Stuck on Samsung Screen and Can't go through that screen! Is there anyway I can move back to stock rom and then update with new Hellybean!
thanks in Advance!
ShahX said:
Hello Guys, Just Found this thread after messing up with my Galaxy S Captivate :| I Unintentionally copied my rom in EXTERNAL SD card and Proceeded further but when I got in Download mode I can't Locate my Rom Zip and I tried Everything as mentioned such as wipe & etc... but Now My Phone is Stuck on Samsung Screen and Can't go through that screen! Is there anyway I can move back to stock rom and then update with new Hellybean!
thanks in Advance!
Click to expand...
Click to collapse
Go in the Dev section (stickies) and get Odin KK4 without bootloaders. Flash it in download mode.
From there, Get Corn kernel, which you'll flash with Odin 1.85 and finally, you can get back to your ROM.
BWolf56 said:
Go in the Dev section (stickies) and get Odin KK4 without bootloaders. Flash it in download mode.
From there, Get Corn kernel, which you'll flash with Odin 1.85 and finally, you can get back to your ROM.
Click to expand...
Click to collapse
Thankyou Soo Much For your Reply Bro, But Can you please guide me in detail like what Exactly Should I do with My Phone, I can Use my phone its wont let me boot into menu I just stuck on Samsung logo, and As TRusselo Guided in his tutorial I have to put any ROM.Zip into INTERNAL SDCARD (Phone Memory) and I can't do that until my phone boot's up properly! right? so Can you please help me out like what Should I do to get it working and THEN trying again to Update it with Hellybean
Once Again thankyou for your kind Reply!

Stock firmware problem after Cyanogenmod

A friend of mine suggested that I try Cyanogenmod, so I decided to flash my Galaxy Mini. The first problem was the bootloop, and no matter how many times I wiped the phone, it was always stuck at the Android text. So I decided to try the Honeycomb mod. Same happened. So I decided to flash it with Android 2.3.6 from sammobile.com. At last, it started working. However, Google Play still sees every application as "installed" (but of course they aren't), and when I try to delete from GP, nothing happens. After trying to install other applications, I realized that I cannot install anything from the market. Any idea how I could solve this problem? I would be very grateful.
did you flash your costom rom trough clockworld mod recovery (CMW)???
lackhoo said:
did you flash your costom rom trough clockworld mod recovery (CMW)???
Click to expand...
Click to collapse
He can't flash it by an another way
Sent from my GT-I9400 using XDA Premium
lackhoo said:
did you flash your costom rom trough clockworld mod recovery (CMW)???
Click to expand...
Click to collapse
Yes I did. I used CWM 5.0.2.6. The funny part is that after being turned off 3 times, Google Play started working But if there's a solution to the bootloop problem I would love to hear it. I searched this forum and the internet and nothing, even though I followed a cyanogenmod wiki's guide.
did you wipe two times before and after flashing cyanogenmod rom
How old is your sd card? because same happened to me. I needed to format my sd card.
Rekesz said:
Yes I did. I used CWM 5.0.2.6. The funny part is that after being turned off 3 times, Google Play started working But if there's a solution to the bootloop problem I would love to hear it. I searched this forum and the internet and nothing, even though I followed a cyanogenmod wiki's guide.
Click to expand...
Click to collapse
Thanked accidentally.
Anyway, tour problem is the CWM you used, didnt u see the DONT USE sign in the version 5.0.2.6 thread? 5.0.2.8 would avoided those errors in flashing custom ROMs
Sent from my GT-S5570 using xda premium
My SD card is as old as my phone, about 9 months old.
No, I didn't see the sign, and to be honest, I didn't even know that there was a 5.0.2.8 version. Do you think it would work with that?
try flash cm7 trough this recovery---->forum.xda-developers.com/showthread.php?t=1342190 i think this in the best cmw........
Rekesz said:
My SD card is as old as my phone, about 9 months old.
No, I didn't see the sign, and to be honest, I didn't even know that there was a 5.0.2.8 version. Do you think it would work with that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1529863 there it is.
I'm sure it works. 5.0.2.6 had some issues as said in the thread, but 5.0.2.8 or 4.0.0.5 works fine. Try it
PM me anything GT-S5570
So I downloaded the new recovery, flashed it via Odin, and now nothing works. When I enter recovery it says that it can't mount /cache/log and /cache/recovery (I think it says these two). I looked around and found that it could be stuck in a bootloop, but luckily Android loads. However, I can't root my phone due to several errors, so I can't install Cyanogen mod. I think I'll give up now But thanks for all the help!
Rekesz said:
So I downloaded the new recovery, flashed it via Odin, and now nothing works. When I enter recovery it says that it can't mount /cache/log and /cache/recovery (I think it says these two). I looked around and found that it could be stuck in a bootloop, but luckily Android loads. However, I can't root my phone due to several errors, so I can't install Cyanogen mod. I think I'll give up now But thanks for all the help!
Click to expand...
Click to collapse
This happens because you are in stock ROM, this errors are normal.If you want ONLY to root your phone you should use stock recovery. Otherwise you can proceed.
PM me anything. GT-S5570
Trublood_ said:
This happens because you are in stock ROM, this errors are normal.If you want ONLY to root your phone you should use stock recovery. Otherwise you can proceed.
PM me anything. GT-S5570
Click to expand...
Click to collapse
Okay. So I flashed the stock ROM back so I can use the stock recovery. Phone rooted-->still getting the same error :/ Sorry for bothering you all so many times, but I just can't understand why this does not work.
Rekesz said:
Okay. So I flashed the stock ROM back so I can use the stock recovery. Phone rooted-->still getting the same error :/ Sorry for bothering you all so many times, but I just can't understand why this does not work.
Click to expand...
Click to collapse
We are here to help you
What error? That one on CWM recovery
PM me anything. GT-S5570
Trublood_ said:
We are here to help you
What error? That one on CWM recovery
PM me anything. GT-S5570
Click to expand...
Click to collapse
Thanks very much Here is what I did step by step:
I returned to the stock recovery by installing the stock firmware. I rooted the phone with stock recovery. Then I installed CWM recovery 5.2.0.8, but I still get the same error in CWM: it can't mount a few things. I still tried installing Cyanogen without wiping, and of course it's stuck at the boot screen with the Android text (I had a feeling that it wouldn't work if the recovery is not fully operational, so I did not want to lose every contact for nothing again). I read that this problem can be solved by formatting the SDCard, so I tried formatting it with PC and the phone also, but nothing. So now I'm back to the stock firmware and recovery with my phone rooted and no idea how to solve any of the problems.
Rekesz said:
Thanks very much Here is what I did step by step:
I returned to the stock recovery by installing the stock firmware. I rooted the phone with stock recovery. Then I installed CWM recovery 5.2.0.8, but I still get the same error in CWM: it can't mount a few things. I still tried installing Cyanogen without wiping, and of course it's stuck at the boot screen with the Android text (I had a feeling that it wouldn't work if the recovery is not fully operational, so I did not want to lose every contact for nothing again). I read that this problem can be solved by formatting the SDCard, so I tried formatting it with PC and the phone also, but nothing. So now I'm back to the stock firmware and recovery with my phone rooted and no idea how to solve any of the problems.
Click to expand...
Click to collapse
Flasging CyanogenMod without wipes? Seriously? Thats exactly why it never worked!! CWM cant mount somethings because you were in stock ROM
Use some backup program to backup contacts, apps, whatever and flash cyanogenmod wiping data and cache before and after.
Sent from my GT-S5570 using xda premium
Rekesz said:
A friend of mine suggested that I try Cyanogenmod, so I decided to flash my Galaxy Mini. The first problem was the bootloop, and no matter how many times I wiped the phone, it was always stuck at the Android text. So I decided to try the Honeycomb mod. Same happened. So I decided to flash it with Android 2.3.6 from sammobile.com. At last, it started working. However, Google Play still sees every application as "installed" (but of course they aren't), and when I try to delete from GP, nothing happens. After trying to install other applications, I realized that I cannot install anything from the market. Any idea how I could solve this problem? I would be very grateful.
Click to expand...
Click to collapse
You Should get gapps for it or you should download .apk for any site........:good:
Thanks Button Ready For You.....:good:
Trublood_ said:
Flasging CyanogenMod without wipes? Seriously? Thats exactly why it never worked!! CWM cant mount somethings because you were in stock ROM
Use some backup program to backup contacts, apps, whatever and flash cyanogenmod wiping data and cache before and after.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
This was just a trial run due to the new CWM recovery. If you read back, I already wrote that I tried wiping both data and cache before and after flashing Cyanogen mod. This "mounting" problem only came up with the new CWM recovery, 5.2.0.8.
The basic Google Apps were all there, since I used a rom from sammobile.com, downloaded programs like poweramp were the ones that did not work.
Rekesz said:
This was just a trial run due to the new CWM recovery. If you read back, I already wrote that I tried wiping both data and cache before and after flashing Cyanogen mod. This "mounting" problem only came up with the new CWM recovery, 5.2.0.8.
The basic Google Apps were all there, since I used a rom from sammobile.com, downloaded programs like poweramp were the ones that did not work.
Click to expand...
Click to collapse
And you tried wipes using 5.2.0.8 version? The mounting problem happened with me only in this recovery too, maybe because it is updated, different or whatever but I flashed and everything was good. Anyway, stay with stock, it seems better for you.
Sent from my GT-S5570 using xda premium
Trublood_ said:
And you tried wipes using 5.2.0.8 version? The mounting problem happened with me only in this recovery too, maybe because it is updated, different or whatever but I flashed and everything was good. Anyway, stay with stock, it seems better for you.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Yes, I guess I will stay with the stock :/ Though I'll try again when a new CWM recovery and a new Cyanogen mod come out.

Note 1 Stuck At Samsung Logo Screen!

Hi Peeps, Happy New Years
Don't Worry I read every thread on XDA and no one has a problem as similar as mines and don't know EXACTLY what type of brick I have.
I got this problem with my Galaxy Note (N7000):crying:
It all started when I was running Ultimate Rom v6 and decided to upgrade to kitkat.
I searched around and found that Spirit Rom had quite positive reviews.
So I downloaded the rom and tried to flash but then ended up with status 7 error.
I then found out I was using an outdated version of CWM (I think it was 6.0.3.7)
I then flashed this file by zedomax (http://downloadandroidrom.com/file/GalaxyNote/recovery/n7000-CWM-KitKatCompatible.zip)
because it had compatible recovery with Kitkat roms and CM 10.2 kernal. Installation went fine and I set up everything.
I then installed lollipop theme (It came with boot animation). Then I rebooted to see how the boot animation looked but to my despair I got stuck at Samsung Boot Logo Screen and couldn't get past it. I couldn't get into recovery, only downloading mode. So then I flashed stock JB rom with PC (Odin). The flashing was successful but I'm still stuck at Logo screen.
Also I would like to also mention that the phone was NEVER on ICS. It was on stock GB 2.3.6, then rooted and flashed Ultimate Rom V6.
Any help would be appreciated :highfive::victory:
GD people. Read. Go to the how to install a KitKat ROM thread.
Sent from my GT-I9205 using Tapatalk
AndroidSlave said:
GD people. Read. Go to the how to install a KitKat ROM thread.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
@AndroidSlave
Calm down dude!
I read the thread properly.......
Unfortunately something went wrong and I'm asking for help (I really don't even know how I messed it up).......
Do you have a problem with that?
I have experience with rooting and custom roms and have never came across something like this.....
007Uzzi said:
@AndroidSlave
Calm down dude!
I read the thread properly.......
Unfortunately something went wrong and I'm asking for help (I really don't even know how I messed it up).......
Do you have a problem with that?
I have experience with rooting and custom roms and have never came across something like this.....
Click to expand...
Click to collapse
If the last thing you did was flash 4.1.2 via PC Odin then flash the correaponsing philz kernel in PC Odin, boot to recovery, and do a factory reset. If you don't want stock TW, then do the above, and then follow the guide on how to flash a KitKat ROM. I feel your error may involve not doing proper wipes, including preload.
Sent from my GT-I9205 using Tapatalk
AndroidSlave said:
If the last thing you did was flash 4.1.2 via PC Odin then flash the correaponsing philz kernel in PC Odin, boot to recovery, and do a factory reset. If you don't want stock TW, then do the above, and then follow the guide on how to flash a KitKat ROM. I feel your error may involve not doing proper wipes, including preload.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
Thanks Dude , You helped think of of something
BTW I fixed it
Maybe my recovery was corrupted or something...... So I was browsing around sticky threads an somehow reasoned it out to flash a prerooted + cwm rom through odin.
This is what I did:
1. Download this http://d-h.st/HJM
2. Flash with PC Odin (Add via PDA button and make sure ONLY Auto reboot is checked)
3. Wait till completed
4. When completed you will still get stuck then....
5. Boot into recovery (Which will now be CWM)
6. Do a factory reset and wipe cache and dalvik cache
7. Reboot
8. Give the logo screen a minute or two
9. Then I get directly to welcome screen.
10. Done
One more thing is do you know what was the cause of this? It's really interesting to know...........
Yeah improper wipes or flashing the wrong kernel for the wrong rom
Sent from my GT-I9205 using Tapatalk

Categories

Resources