Is possible use the pc's wifi connection to connect to inet our mobile?
Yes, you only need to share your network.
In windows/networks - share.
warriorofice said:
Yes, you only need to share your network.
In windows/networks - share.
Click to expand...
Click to collapse
But I will need another wi-fi board and I haven't.
¿Por qué no lo preguntáis en español en htcmanía? exactamente no entiendo que quieres hacer, para usar la conexión wifi solo tienes que conectarte a la red y navegar con la clave (si tiene). Otra cosa es intentar coger la señal del adaptador wireless del pc al móvil, eso creo que no se podrá.
Aqui no se permite hablar en un idioma diferente al ingles, y como pregunto aqui, pues le contesto aqui.
Sent from my HTC Legend using XDA App
Yes, you need wifi in your pc
Sent from my HTC Legend using XDA App
U should have 1) windows 7. 2) wired LAN plugged to internet and WiFi card. Or two WiFi cards with no internet connection on one of them. Then google the "Connectify". It should work. I use this method with my Sony vaio and HTC legend. If u have another OS then sorry. Can't help
And thousands apologizes for bad English
Sent from my Legend using XDA App
It is a shame that tethering doesn't work from pc to legend via usb cable. It works on winmo devices.
slovenec88 said:
It is a shame that tethering doesn't work from pc to legend via usb cable. It works on winmo devices.
Click to expand...
Click to collapse
Thats a big shame, Winmo can do that for years
HELP HELP HELP!!!
Hello,
i'm new here and i have a problem using ICS Roms (28v, 30a, etc)
I tried to make this question in development's posts but i couldnt coz i'm new here
I'm from Argentina and my company is Personal... and my problem is using data (3g, 2g) conection! i don't have conection!!
Using CM10 roms i don't have any problem.. i tried flashing different basebands and rils but without success!! if anybody can help me i'll be so grateful!!!
Thanks!!!
Hi there,
First of all: please, avoid posting questions on the development forum. The Q&A forum is there for a reason, you know?
About your issue, it's probably related to your current BB/RIL. Do you remember which BB your device had when 3G worked? I'm also using ICS (V30A), my carrier is Movistar (Venezuela) and got no problems with 3G. I'm using the latest BB (the one bundled with ICS V30A) and haven't changed RIL.
Also, did you check your APN settings (Settings > Wireless & Networks > Mobile networks > Access Point Names)? Make sure it's the right one, I had to configure mine manually since it was missing.
lcardozo said:
HELP HELP HELP!!!
Hello,
i'm new here and i have a problem using ICS Roms (28v, 30a, etc)
I tried to make this question in development's posts but i couldnt coz i'm new here
I'm from Argentina and my company is Personal... and my problem is using data (3g, 2g) conection! i don't have conection!!
Using CM10 roms i don't have any problem.. i tried flashing different basebands and rils but without success!! if anybody can help me i'll be so grateful!!!
Thanks!!!
Click to expand...
Click to collapse
Check that you have any APN where DrummerMuppet indicated, if you don't have any then create one according to your carrier company, take a look at this.
Grettings.
----
Fijate que tengas algun APN donde indico DrummerMuppet, si no tienes ninguno entonces crea uno de acuerdo a los datos de tu compañia, fijate aqui. (Si efectivamente no tienes ninguno y creandolo con los datos del link no te funciona, quizas hayan nuevos valores, busca nuevamente en internet o consigue a alguien mas con un android y ves que datos tiene)
japmsn said:
Check that you have any APN where DrummerPuppet indicated, if you don't have any then create one according to your carrier company, take a look at this.
Grettings.
----
Fijate que tengas algun APN donde indico DrummerPuppet, si no tienes ninguno entonces crea uno de acuerdo a los datos de tu compañia, fijate aqui. (Si efectivamente no tienes ninguno y creandolo con los datos del link no te funciona, quizas hayan nuevos valores, busca nuevamente en internet o consigue a alguien mas con un android y ves que datos tiene)
Click to expand...
Click to collapse
Exacto ^^ And it's DrummerMuppet
PARA LA VERSION EN ESPAÑOL VE AL POST 2
YOU FOLLOW THIS GUIDE AT YOUR OWN RISK!!!!
This guide, has been made for the people that has problem's with the signal, battery and other problem's installing jellybean at Latinamerica.
Most common problem: no signal at all, battery life...
F.A.Q.
Q. Why i do not have signal at jellybean, pacman, miuiv4, paranoid...
A. i think the problem is the imei, that is lost, when you flash the new versions
Q. Why the imei is lost in jellybean, but not with Ginger or ICS.
A. i don't know but this sould help you with the problem
Click to expand...
Click to collapse
To fix the problem, you just have to follow this few steps to make it work
Files needed:
1. STOCK ROM, it can be Froyo, Gingerbread, or ICS, here is a rom you can use (it will work) DJANGO ICS STOCK ROM
2. Hyperterminal Descargar
3. AIOTKV5 Descargar
4. We need a baseband Ir al post (TIP: at
Venezuela, Movistar, i used version V30B)
We need to know our original imei, it's placed at the box, or in the phone, under the battery.
Ok, let's begin!
Firs Step. (Installing the Stock ROM, if you already are on Stock, go to step 2.)
We have to flash a Stock rom, in order to view flash the baseband and connect to Hyperterminal.
Assuming you are on the oldbl, we copy the IntSD-Mount-Fix.zip and our Stock ROM to SD ext, now we open the AIOTKV5 and press option 4, and follow the steps to flash the new unlocked bootloader and install a recovery.
Restart the phone and it will open the recovery, then flash the Stock ROM, in the aroma installer, install whatever you want, we just need the rom for flash a BB.
Step 2. Flashing BB
Now we have a Stock ROM, call *#06#and we will see our imei.
Open the AIOTKV5 and press option 7 and option B, follow the instructions to put your phone Download MODE
In the SmartFlash window we click on the ROM/Copy DLoption and, inCP bin we find the BB that we got from tonyp's thread we have to mark the checkbox ERASE CAL DATA. (BE SURE THE COM PORT HAS BEEN AUTOMATICALLY FILLED)
Now, we go to START, if an error show's at the end of the flash, just close that window, and click start again, do it until, it says disconnecting from phone, or something like that.
Now, we verify our actual imei *#06# and we will se that our imei has changed to something like this 38560000001 or some strange number, or no nomber.
Now call if youare on GB: 1809#*990# / if you are on ICS: 3845#*990#
It will show up a (Hidden Menu)
Click on port settings
Click on CP USB
Click OK (DO NOT MARK THE CHECKBOX)
Now we have to search the port, Equipo -> Administrar -> Port -> LG mobile USB serial Port (COM X) where the X is a number, (Remember that number)
Step 3. Installing the Hyperterminal
Intall it normally, like always.
Open the Hyperterminal, and click Cancel to any windows that shows (some windows requiere a confirmation to close a window)
Now in the main window (a white one), click anywhere, and click on "SPACEBAR KEY" and a new window will show up, to create a new connection, select there the port you just stored, (DO NOT SELECT THE LG..)
Click properties and select the right options like these:
1st checkbox: 115200
2nd checkbox: 8
3rd checkbox: Blank
4th checkbox: 1
5th checkbox: Blank
Click to expand...
Click to collapse
and press OK, and OK
If everything's fine, the main windows will show up a, Connected: 00:00:00, in the left bottom corner.
Now type "AT" without the quotes, and press enter,
You will see this.
OK
GREAT Now it's easy!
type " at%imei " without the quotes.
You will se a number like this: 38560000001 or other number.
Now type " at%imei=YourIMEI " without quotes, where "YourImei" is your imei, you stored at the begining.
Ejemplo: " at%imei=30265978462 "
And you are done, call *#06# and you can se your imei.
Now you just have to flash your ROM, like CyanogenMOD 10.1, PAC-man, Paranoid, etc...
Please feel free to comment
Thanks to:
spyrosk For making this amazing tool, AIOTK.
tonyp For making the complete baseband guide.
carburano For making the DjangoManoucheX Stock ROM used here.
x_justin to make the english guide,
dcseek who brought us the solution.
[GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
FOR ENGLISH VERSION OF THE GUIDE, SEE POST 1
SIGUES ESTA GUIA BAJO TU PROPIO RIEZGO, NO ME HAGO RESPONSABLE POR DAÑOS O NADA ASI.
Esta guia esta pensada para todos aquellos, que tienen problemas (como yo) al instalar cualquier version mas alla de Gingerbread.
Problema mas comun: Sin señal.
F.A.Q.
Q. Porque no tengo señal en ninguna version.
A. El problema es que tu IMEI desaparece al instalarlo, aunque la BB y el RIL esten bien
Q. Problemas que causa.
A. Obviamente no tienes señal de ningun tipo (exepto por el WIFI), la bateria se consume muy rapido, ya que envia paquetes sin respuesta, y sigue intentando para obtener GSM.
Click to expand...
Click to collapse
Arreglando el problema. Solo debes seguir unos pocos pasos y asi lograr que te funcione.
Requerimientos:
1. ROM STOCK, puede ser Froyo, GB, o ICS. Aqui dejo el link para DjangoManoucheX DJANGO ICS STOCK ROM
2. Hyperterminal Descargar
3. AIOTKV5 Descargar
4. Necesitaremos la Baseband que nos guste Ir al post (TIP: en Venezuela, Movistar, me funciona la version V30B)
5. Sabernos el IMEI de nuestro telefono, en el telefono debajo de la pila, o en la caja.
Ok, comenzamos
Paso 1. (Instalando la ROM de Stock, si ya estas alli salta este paso.)
Tenemos que instalar la version STOCK de la rom, en DjangoManoucheX posee AROMA INSTALLER asi que sera facil instlarlo,
Asumiendo que estas utilizando el viejo bootloader, Copiamos IntSD-Mount-Fix.zip y nuestra rom DjangoManoucheX en nuestra SD externa, vamos al AIOTKV5 presionamos 4, y seguimos los pasos para montar nuestra particion con el nuevo bootloader liberado, e instalamos el recovery.
Reinicias normalmente, y entrara solo a Recovery, buscas e instalas normalmente, no importa que selecciones para instalar, solo queremos la rom para cambiar la BB.
Paso 2. Flasheando la BB
Ya que tenemos nuestra Rom de Stock, marcamos *#06# y veremos nuestra iMei cualquiera que sea el numero.
Abrimos el AIOTKV5 y presionamos la opcion 7 y seleccionamos la opcion B, y seguimos las instrucciones.
En la ventana de SmartFlash vamos a la opcion ROM/Copy DL y en CP bin buscamos la BB que descargamos. Seleccionamos la opcion ERASE CAL DATA. (Debes verificar que el campo PORT se rellene solo)
Y vamos a START, si aparece un error al final, solo cieralo, y dale START de nuevo, intenta hasta que diga, Desconectando.
Ahora, verificamos nuestra iMei marcando *#06# y veremos que nuestra iMei sera algo como esto 38560000001 o un numero extraño, o sin numero, da igual.
Ahora vamos a marcar, Si estas en GB: 1809#*990# / Si estas en ICS: 3845#*990#
Aparecera un Menu oculto (Hidden Menu)
Presionar en port settings
Presionar en CP USB
Presiona OK (NO SELECCIONES EL CHECKBOX QUE APARECE.)
Ya que hicimos eso, verficamos en nuestra pc, Equipo -> Administrar ->Puertos -> LG mobile USB serial Port (COM X) donde la X es un numero cualquiera, (RECUERDA EL NUMERO)
Paso 3. Instalando el Hyperterminal.
Luego de que lo descarguemos, aparecera el Wizard Setup. instalas todo normalmente, y abres el programa.
Presiona en cancelar a todo lo que aparezca, en algunos tienes que aceptar, el cancelar la ventana.
Ahora que quedo la ventana completamente blanca, haz click en cualquier parte y presiona la tecla "Espacio/Barra espaciadora" y una nueva ventana aprecera, diciendo Nueva Conexión, ahora seleccionamos el puerto que ya habiamos recordado, (NO ELIJAS EL QUE DICE LG)
y vamos a propiedades, y colocamos todo asi:
Primer recuadro: 115200
Segundo recuadro: 8
Tercer recuadro: Vacio / o Blank
Cuarto recuadro: 1
Quinto recuadro: Vacio / o Blank
Click to expand...
Click to collapse
Ahora presiona Ok, y Ok.
Y si haz hecho todo correctamente la ventana dira en la parte inferior izquierda, Connected: 00:00:00
Ahora escribe "AT" sin comillas, y presiona enter
veras algo como esto.
OK
Ahora escribimos " at%imei " sin comillas
veremos algo como esto: 38560000001 o un numero extraño.
Ahora escribimos esto " at%imei=TUIMEI " sin comillas, donde "TUIMEI" es obviamente tu numero de imei,
Ejemplo: " at%imei=30265978462 "
Y Listo! ya que hicimos todo, vamos de nuevo a nuestro movil, y marcamos *#06# y podremos ver nuestro imei.
Ahora simplemente, buscamos la ROM que nosotros querramos, como por ejemplo, CyanogenMOD 10.1, MIUIv4, o la que quieras
Y Puff el problema de la señal ya esta resuelto.
Thanks to:
spyrosk Por crear la maravillosa herramientar, AIOTK.
tonyp Por hacer la guia completa de las Baseband.
carburano Por hacer DjangoManoucheX Stock ROM que utilizamos.
x_justin Por hacer la guia en ingles.
dcseek Quien nos trajo la solucion.
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Great friend......
But i could not understand anything.....would have been better if it was English first and the other language...
But will wait for the translation
Thanks mate
O2X with Magical ICS ROM and magnificent kernels from my buddies
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Great help bro, still sounds complicated, a hug from Colombia and thanks
Sent from my SGH-I777 using xda app-developers app
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Hermano, it's not difficult jus try and don't worry about bricking the phone because it's unbrickable. Cheers.
Enviado desde mi LG-P990 usando Tapatalk 2
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Thanks... I didn't know there was a problem updating to jellybean on a p990h
Sent from my LG-P990 using xda app-developers app
It was what was missing!
many latin american users don't used cm10/cm10.1 only for imei missing!!
GOOD THREAD MAN! thanks!
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Te mereces muchos thanks, buen post, saludos desde argentina
Sent from my LG-P990h using xda app-developers app
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
For install paranoid Android, Must i follow the same procedure?
Sent from my SGH-I777 using xda app-developers app
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Thank you! Good job..
Sent from my LG-SU760 using xda app-developers app
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
Eduardo9309 said:
For install paranoid Android, Must i follow the same procedure?
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Yes if you install paranoid you will have no signal at all if you have the p990h
Enviado desde mi LG-P990 usando Tapatalk 2
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
you might want to change the title as all jellybam rom threads have been banned from xda
Sent from my LG-P990 using xda app-developers app
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
tonyp said:
you might want to change the title as all jellybam rom threads have been banned from xda
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
What the reason they had been ban?
Re: [GUIDE][p990H] Latinamerican Jellybeam Installation without problems.
tonyp said:
you might want to change the title as all jellybam rom threads have been banned from xda
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Wow I didn't noticed that the tittle had been changed... I thought it was jellybean.
I will change the name.
orbital_71 said:
What the reason they had been ban?
Click to expand...
Click to collapse
I do really think it's because gio doesn't support his rom. But who knows.
Enviado desde mi LG-P990 usando Tapatalk 2
Alguien me podría confirmar que con esto se arregla el problema del porcentaje de batería que aparece como 999% y no aparece en la barra de notificaciones
Someone could confirm that this will fix the problem of battery percentage shown as 999% and does not appear in the notification bar
Thanks
Gracias amigos
Enviado desde mi LG-P990 usando Tapatalk 2
rapbyone said:
Alguien me podría confirmar que con esto se arregla el problema del porcentaje de batería que aparece como 999% y no aparece en la barra de notificaciones
Someone could confirm that this will fix the problem of battery percentage shown as 999% and does not appear in the notification bar
Thanks
Gracias amigos
Enviado desde mi LG-P990 usando Tapatalk 2
Click to expand...
Click to collapse
Yes
Sent from my SGH-I777 using xda app-developers app
Somebody can help me ?
I lost 3g on Telcel mexico, i have a p990h but when i select wcdma "3g" the signal is lost, i try with nvflash by homero, return to gb flash the baseband v30b and erase my imei and notingh :/
lolote said:
Somebody can help me ?
I lost 3g on Telcel mexico, i have a p990h but when i select wcdma "3g" the signal is lost, i try with nvflash by homero, return to gb flash the baseband v30b and erase my imei and notingh :/
Click to expand...
Click to collapse
Try choosing wcdma + gsm or something similar, not only wcdma
Sent from my SGH-I777 using xda app-developers app
Eduardo9309 said:
Try choosing wcdma + gsm or something similar, not only wcdma
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
but when i chose Wcdma + gsm, i dont have 3g stuck on E (edge)
lolote said:
but when i chose Wcdma + gsm, i dont have 3g stuck on E (edge)
Click to expand...
Click to collapse
That is weird, do you have a p990h? In telcel mexico?
Sent from my SGH-I777 using xda app-developers app