Hello,
I'm actually with radio LRB, speedmod kernel and with ICS stock LQ3.
I'm trying to install Kingdroid 5.0, install is good but after reboot I can't set my fisrt settings because process Acore have some issue.
Installation do with Fullwipe and factory reset and wipe cache done before installing.
What I have to do ?
May be some choice in aroma are not working together ?
Thanks for help.
[RESOLVED]
Just have to take just a few option ...
Related
I'm on Darky's v5.6 ROM and everytime I try to open 'contacts' is says android.acore has stopped responding... force close etc...
Please tell me how to fix this!
I've done cache wipe and dalvik wipe which didn't fix it.
also having this problem, on 6.0. Did a full wipe/factory reset before flashing to 6.0, from 5.5.
Hi.
I have Checkrom revolution HD v6 on my phone at the moment but i keep getting bootloop issues so i have followed the instructions here http://forum.xda-developers.com/showpost.php?p=18599602&postcount=3 "Q: I'm getting bootloops what should i do now ?"
I go into the recovery menu but when i try and wipe data/factory reset i keep getting the following message " Error mounting/sdcard/.android secure!
Any advice please?
Flash the rom again from recover ........ if u still getting boot loops then try another ROM......... if all fails then >>>> go to download mode and flash stock firmware with odin....... best of luck
hi all, i have an insteresting problem while upgrading from GB 2.3.6 to ICS.
i tried all the versions of kernels and ROM's here and was unable to find a solution.
1. when i am on GB i go into CWM, do all the possible wipes
2. i install from SD the new ICS version
3. after the installation i do all the wipes again
4. then i reset the device.
each time, the device is showing me the startup animation and then i get a screen saying that the encryption was unsuccessful.
nothing helped from there, i did wipe to factory default again - did not help, i re-flashed again - nothing helped.
i am stuck on GB without being able to use the good ROM's we have in this forum.
please help if you can.
thanks in advanced.
Did u try slim ICS rom http://forum.xda-developers.com/showthread.php?t=1488096
Boot into recovery(CWM)
Do factory reset
Wipe cache
wipe dalvik cache
Flash the base file
Flash the essentials file
wipe dalvik cache
reboot
no, did not work.
after i finished all the steps the device started with the boot animation and again - encryption unsuccessful .
BTW, an interesting issue, after the encryption unsuccessful i got the device back into recovery mode and when i tried to load another zip from the sdcard i got an error in the device saying that my sdcard cannot be found.
any solution to that?
Did you check this thread ?
http://forum.xda-developers.com/showthread.php?t=1447303
i have done this a long time ago.
and got to step 9, which afterwards i was supposed to have the ICS working but still i got the "encryption unsuccessful " error.
i was actually looking also for ICS files to use via Odin (maybe that will solve the problem) but did not found any.
Try asking in the same thread abouth the encryption error
dvdscr said:
hi all, i have an insteresting problem while upgrading from GB 2.3.6 to ICS.
i tried all the versions of kernels and ROM's here and was unable to find a solution.
1. when i am on GB i go into CWM, do all the possible wipes
2. i install from SD the new ICS version
3. after the installation i do all the wipes again
4. then i reset the device.
each time, the device is showing me the startup animation and then i get a screen saying that the encryption was unsuccessful.
nothing helped from there, i did wipe to factory default again - did not help, i re-flashed again - nothing helped.
i am stuck on GB without being able to use the good ROM's we have in this forum.
please help if you can.
thanks in advanced.
Click to expand...
Click to collapse
From jvu, to install Slim ICS 2.8, in cwm factory reset/wipe cache/wipe delvik/format system/format cache/format datadata , flash 2.8 Essentials i9000 first then Base 2.8 (if bootloops pullout battery, put it back, enter recovery, reset, wipe, flash base again) and then Essentials again.
I'm currently running the latest CM9 on it with moboot... It seems like every time it boots up it pops up with that error message and literally won't go away and you have to reboot the device.. the only way I've found to temporarily fix it is to just wipe cache.... but it always comes back.
Is there any way to prevent this from popping up? It happened when I was on Classicnerd BUTTA too.
Wipe the system and caches, then reflash
I had this problem as well a while back. Wiping caches and reflashing the ROM worked for me.
And you guys didn't have the problem again, after that?
Help manually moving contacts and choosing a JB ROM.
If a pro could help me out I would appreciate it very much. I have been trying to move from a dangerous ICS build to JB and I am having this same problem.
My N7000 previously had this on it:
android 4.03
radio 19220zclp6
kernal version 3.0.15-i9220zclp1-cl131270 (bad ics kernal)
build number midnote 2.0 iml74k.zclp1
So I used ODIN to flash it to a GB rom but I got the com.android.process error and my phone would lock up.
So then I found this link http://forum.xda-developers.com/showthread.php?t=1424997 and flashed this ROM "N7000UBLR3 N7000UVOLR1 - Download - Argentina" from the bottom of the page. I wiped only the the cache (not the phone reset) and flashed it again but I still get the process error and phone locking up. I don't even know if this ROM is a safe ROM!!
Am I even on a safe kernal now? kernal n7000ublr3-cl890184 build imm76d.ublr3
What I need help doing is the following.
1. Before doing a full wipe, I need to either manually save my contacts to my PC or back them up. (no apps work but my pc can browse my phone) If I knew where my contacts were located, maybe I can manually copy them to my pc? So any help saving data from a partially unusable phone would help.
2. Flash to a safe GB rom, so I can then do the full wipes safely and then flash to a stable JB rom. (I have no clue which roms to choose here and need help).
Thanks for any help..
I really was checking the whole internet to find the solution for this but I couldn't find it (I'm a begginer so that might be the problem).
Problem is this.
I have a Samsung I9000 with rooted Gingerbread (BOJV9). I have rooted it with the CF-Root-XX_OXA_JVZ-v4.3 KERNEL.
So now my phone has a Kernel version: 2.6.35.7-I9000XWJVZ-CL762604 [email protected] #2.
And the next thing that I wanted was to install the Slim Bean 4.2.2. So I went to the CWM recovery and I have done the wipe of cache, dalvik cache and data/factory reset. everything went ok and fast. then I went to install the Slim Bean and started the install but just when it started, showed on the screen that it is instaling updates, phone just reseted, and Semaphore logo showed up, and was standing there for 10minutes. So I googled and saw that that was some kind of error. So I went CWM recovey and it had a new look because the version changed (from v3 to v6 I think) but I couldnt find data on my external SD card, as if it was deleted, but it was not, the data was there. Then I found this page http://forum.xda-developers.com/showthread.php?t=1494493 and was able to start the phone by flashing it with the original I9000 rom, and then installed the CWM again and then i returned my backup that I made of my phone. Then I started again to install Slim Bean again but this time I got an error at the wipe dalvik cache saying E:unknown volume for path. Now I dont know what could be the problem but please can you help me. Should I first install some other custom rom or should I put the rom files on to the I9000 memory or what. I am really confused
Also the same thing happend when I tried to install CM10. it starts the installation but it restarts after few seconds.
Files that I have used
Slim-I9000-4.2.2.build.3-OFFICIAL.rar
cm-10.0.0-galaxysmtd
Anyone? Help?
Do what you did again till the recovery changes to v6 as you said & then flash the slim bean or any other rom again... it will work.
Good luck
yatharthsims said:
Do what you did again till the recovery changes to v6 as you said & then flash the slim bean or any other rom again... it will work.
Good luck
Click to expand...
Click to collapse
Thank you sir. This helped me. God bless you