Database Develop

[Q] Hepl needed !

Just fleshed V6 update , stock version , wiped data , dalvik chache before , and yeah , it turns on , but stuck at xperia bootanimation , it's keep restarting and vibrete like usaly but again its restart and do that again :/ and not turn on . PLEASE HELP
sorry for a bad english.
Flashed this - forum.xda-developers.com/showthread.php?t=1363033

vanillaLVL said:
Just fleshed V6 update , stock version , wiped data , dalvik chache before , and yeah , it turns on , but stuck at xperia bootanimation , it's keep restarting and vibrete like usaly but again its restart and do that again :/ and not turn on . PLEASE HELP
sorry for a bad english.
Flashed this - forum.xda-developers.com/showthread.php?t=1363033
Click to expand...
Click to collapse
How to install:
1.Download the Escha Arch.
2.Copy Escha Rom onto SdCard.
3.Flash it
4.Enjoy
5.Do not Full-Wipe.
i am rookie but if you full-wipe and not supposed to that flash to stock ROM
and then re-try from there
good luck

mario1024 said:
5.Do not Full-Wipe.
Click to expand...
Click to collapse
To outline the "rules of the ROM flashing game" to you guys...
- When you switch between ROMs:
You NEED to "Full Wipe (Factory Reset)" in the recovery or you will, very likely, end up in a boot-loop. This means the phone suddenly restarts either at the static logo (if the ROM has one) or during the animation (if the ROM has one).
- When you update the ROM currently in use to a newer version:
You MAY try to omit the Full-Wipe and proceed at your own risk (note that it's RECOMMENDED to Full-Wipe even at an upgrade). If everything works as intended you spared yourself some trouble. If you encounter weird "bugs" while using the ROM you better Full-Wipe and retry before posting an unfounded "bug report".
If the phone is stuck at the white Sony Ericsson boot logo, or restarts there, then something went terribly wrong while flashing the ROM ... most likely a bad flash. If there's no way to get into the recovery to re-flash the ROM then the only way out is to restore back to Stock ROM by Flashtool (or PCC/SEUS).

mario1024 said:
How to install:
1.Download the Escha Arch.
2.Copy Escha Rom onto SdCard.
3.Flash it
4.Enjoy
5.Do not Full-Wipe.
i am rookie but if you full-wipe and not supposed to that flash to stock ROM
and then re-try from there
good luck
Click to expand...
Click to collapse
I first try whitout wipe , but the same think .
And now i am on android 2.2

as i said i am just rookie and B.Jay helped me so ask him for instructions

mario1024 said:
as i said i am just rookie and B.Jay helped me so ask him for instructions
Click to expand...
Click to collapse
Never dealt with the Escha Arch ROM ... I don't feel like wanting to use a ROM which name I can't pronounce or spell without having a reference from where I can copy/paste its name.

[Q] flash without reboot ?

Hey guys
my Question when i flashing stock rom / Kernel i should going to recovery mode .. the wipe data / cache .. now i should reboot ? or pull the battery out then pull it back then going to download mode and flashing kernel / rom ? and when i flash rom the next step i select fixing permisson ?
Thx

NOORHASHIM said:
Hey guys
my Question when i flashing stock rom / Kernel i should going to recovery mode .. the wipe data / cache .. now i should reboot ? or pull the battery out then pull it back then going to download mode and flashing kernel / rom ? and when i flash rom the next step i select fixing permisson ?
Thx
Click to expand...
Click to collapse
what are you on already?

zacthespack said:
what are you on already?
Click to expand...
Click to collapse
i want to flashing stock rom and kernel .. but im asking about reboot ..
i should wipe data / cache before flashing any stock rom or kernel right ?
i saw another step
wipe cache / wipe data
dont reboot system yet
pull battery out then pull it
then go download mode and flash rom

Just flash a stock rom with PC Odin in Download mode, let it do it's magic and when the phone is booted, turn it off, boot into the normal recovery, do a wipe/factory reset and reboot.

bioweb said:
Just flash a stock rom with PC Odin in Download mode, let it do it's magic and when the phone is booted, turn it off, boot into the normal recovery, do a wipe/factory reset and reboot.
Click to expand...
Click to collapse
firstly thx .. but i need to know before i flashing stock what i should do ? wipe data cache ? then reboot or wipe data cache then pull battery out ? then i boot into download mode and flash stock rom ?

You shouldn't have to do anything before flashing but if you want to be absolutely sure then yeah, reboot to CWM recovery, wipe data/cache/Dalvik and turn off the phone (you can do this by pulling the battery or just reboot the phone and shut it down like you normally do).
Turn on the phone in Download mode, flash a rom with Odin and you are back to a stock Note.

bioweb said:
You shouldn't have to do anything before flashing but if you want to be absolutely sure then yeah, reboot to CWM recovery, wipe data/cache/Dalvik and turn off the phone (you can do this by pulling the battery or just reboot the phone and shut it down like you normally do).
Turn on the phone in Download mode, flash a rom with Odin and you are back to a stock Note.
Click to expand...
Click to collapse
Thanks Bro ok and for kernel same step ?

If you just want to run a stock firmware you only have to do the flash with Odin, the stock kernel will be flashed automatically.
So first wipe, turn off, Odin flash in Download mode and you've got a stock firmware, a stock kernel and a stock modem so your phone is the same as you got it from the store again.

bioweb said:
If you just want to run a stock firmware you only have to do the flash with Odin, the stock kernel will be flashed automatically.
So first wipe, turn off, Odin flash in Download mode and you've got a stock firmware, a stock kernel and a stock modem so your phone is the same as you got it from the store again.
Click to expand...
Click to collapse
not stock kernel ... i want flash franco kernel ..
firstly flash speedmod because CWM
then wipe data / cache / dalvik cache battery stats then install kernel franco ?

This thread feels like trying to run a marathon through knee-high mud.
To the OP:
1. On a scale of 1-100, your know-how is at -11
2. You have just the faintest of ideas what you're really trying to achieve
3. You are unable to ask coherent questions because your English is somewhat exotic
4. You are unable to understand the answers because of all of the above
I fear you are beyond help here.

chasmodo said:
This thread feels like trying to run a marathon through knee-high mud.
To the OP:
1. On a scale of 1-100, your know-how is at -11
2. You have just the faintest of ideas what you're really trying to achieve
3. You are unable to ask coherent questions because your English is somewhat exotic
4. You are unable to understand the answers because of all of the above
I fear you are beyond help here.
Click to expand...
Click to collapse
bro he already answer my question about how to flash rom .. but he forget to tell me how to flash kernel :S .. i i'm now im not good in english but i hope someone help me ,

plzz help serious....sry to post in development ....but its urgent...........help

sry adminstrator to post this thread in development
i neeed serious help.............so plzz
pllzzz see
all this happened only when i tried to flash cyannrevo...
it enters into lockscreen quick reboot....automatically
dont know what happen
due to cyno
it happened same with
chocobread
emanon
cm7 rc0....
steps i done to flash revo
1.official gb 2.3.6
2.cwm 5.8 touch
3.parttion sd frm cwm
4.of size 512mb
5.swap size 0mb
6.partition done
7.flash cyanrevo
8.enter into lockscreen for second
9.frequent reboot cant do anything
10.rebooting again and agaim
11.fed up of it so i tried other rom
then similar problem of rebooot for each rom
but gb 2.3.6 is working fine for me
i can go to downld mode as well as recovery...
i know all this after i flashed cyan revo
i respect squadzone....and his rom
what happened this time
dont comment me to do wipe and all
i tried all this
dont telll te reflash....i tried n no. of times
neeed help plzzz developer squadzone parasami and alll other help me...its serious matter help me.........

are you tested install via odin stock recovery
Sent from my GT-S5570 using xda premium

ya......

Have you tried to do a wipe of your SD and reinstall rom?

as i said....dont say to wipe and reflash i did it n no. of times
sry to angry
but i am seerious need help

Did you overclock the ROM? Maybe you should wipe before installing and after installing. Maybe successive flashing causes problems. As last resort flash a stock ROM and send it to centre if its under guarantee or for repairs.
This sort of thing never happened to me scept when i overclocked my SGM. Tell us if u did something like tweaking or something like that.
Edit1 : Try xperia gamerz v2 - and see if it works. Works smoothly for me :/

MAYUR.SINKAR said:
as i said....dont say to wipe and reflash i did it n no. of times
sry to angry
but i am seerious need help
Click to expand...
Click to collapse
try this
Wipe data
wipe cache
Advance
wipe dalvik cache
wipe battery stat
mount&storage
format system
format sd ext
Install zip from sdcard/choose zip
after complete
wipe data
wipe cache
Reboot

slow down man .
what your phone models ? (e,g GT-S5570I , GT-S5570B or similiars ?)
try to retry anythings from here :
1. flash gingerbread 2.3.6 via odin (2.3.4 works perfectly for me)
2. flash cwm recovery from odin too
3. do factory reset (data,system,cache,sd-ext)
4. flash cwm 5.8
5. reboot recovery
6. flash another rom (do not flash cyanrevo yet)
7. do factory reset again
and if this method cant help , go to service center *maybe*
(just trying to help)

Hey i m using gt s5570 indian.......i had not overclocked....i tried various things why and for whay reason shld i go to servicr cebtre ....gb is working for me f9.....still cm7cant install help plz

flash to froyo, then pleas dont flash a removed bootloader gingerbread firmware.

Hey i already flashed bootloader of gingerbread xpk 1 what to do??downgradin will hard brick my phone????

check your another post..

[Q] Help

fixed

boot into recovery and flash the rom again , dont wipe data , because its the same rom you should be able to keep everything

reflash the ROM?

Unable to boot after installing CUSTOM ROM

Hello to everybody,
I wanted to install custom ROM (MindCr Rom v2.4), and i did a wipe data, wipe dalwik cache, and install zip from SD card, and reebot.
The problem is in that, my Samsung Galaxy Ace S5830i is stuck at Logo screen. Is there a way to ubrick phone?
I can't to go in ClockWork Mode, and download mode. Please help me, I would be grateful.

padhu1989 said:
Hello to everybody,
I wanted to install custom ROM (MindCr Rom v2.4), and i did a wipe data, wipe dalwik cache, and install zip from SD card, and reebot.
The problem is in that, my Samsung Galaxy Ace S5830i is stuck at Logo screen. Is there a way to ubrick phone?
I can't to go in ClockWork Mode, and download mode. Please help me, I would be grateful.
Click to expand...
Click to collapse
Possibly you can go into download mode
Press vol up+ vol down + Power button while phone is turned off
Then connect your phone to PC and follow the unbrick tutorial

padhu1989 said:
Hello to everybody,
I wanted to install custom ROM (MindCr Rom v2.4), and i did a wipe data, wipe dalwik cache, and install zip from SD card, and reebot.
The problem is in that, my Samsung Galaxy Ace S5830i is stuck at Logo screen. Is there a way to ubrick phone?
I can't to go in ClockWork Mode, and download mode. Please help me, I would be grateful.
Click to expand...
Click to collapse
Have you format system and mount system after do all wiping? Because many people forgot this step and got same problem as you. Read the installation guide carefully next time.
To unbrick you can refer
http://forum.xda-developers.com/showthread.php?t=1840645 or http://forum.xda-developers.com/showthread.php?t=1551156

padhu1989 said:
Hello to everybody,
I wanted to install custom ROM (MindCr Rom v2.4), and i did a wipe data, wipe dalwik cache, and install zip from SD card, and reebot.
The problem is in that, my Samsung Galaxy Ace S5830i is stuck at Logo screen. Is there a way to ubrick phone?
I can't to go in ClockWork Mode, and download mode. Please help me, I would be grateful.
Click to expand...
Click to collapse
for unbricking u can see this turtoial ..
forum.xda-developers.com/showthread.php?t=1840645
and when installing mindcr rom format system and mount system and data after the wiping process.
it should help u..
as it happened with me but after formatting system and mounting system and data it went alright..

It may happen if you are coming from a custom ROM into another custom ROM
It happened to me when I changed from Mindcr ROM to BouDzDroid ROM but I managed to solve it via odin as I already have my stock ROM and the phone opened in download mode
---------- Post added at 12:51 AM ---------- Previous post was at 12:45 AM ----------
Alioda said:
It may happen if you are coming from a custom ROM into another custom ROM
It happened to me when I changed from Mindcr ROM to BouDzDroid ROM but I managed to solve it via odin as I already have my stock ROM and the phone opened in download mode
Click to expand...
Click to collapse
I think it is better to go to stock rom before flashing any custom rom in order to avoid dependencies, of course I'm a beginner in this