Related
Installed cmod7 stable (7.2) and the gapps file (found in another link - the one on nookdevs doesn't work). On first boot, it is stuck at a screen that just has a bar that says "Setup Wizard". The bar doesn't appear to be tapable. Search forum, no threads found on this.
Thanks in advance!
Dave
rebooted, still problems
dweaton said:
Installed cmod7 stable (7.2) and the gapps file (found in another link - the one on nookdevs doesn't work). On first boot, it is stuck at a screen that just has a bar that says "Setup Wizard". The bar doesn't appear to be tapable. Search forum, no threads found on this.
Thanks in advance!
Dave
Click to expand...
Click to collapse
I powered off and then on so it would reboot - it went through the setup screens. I get aborts of android.process.media so it won't let me go through the google play icon. When I try to click on Nookreader for android while on barnes and noble web site, it aborts again. I had the latest daily on here 2 days ago and was getting the same abort, but only twice when android first started. Tapping on google play then said "server error" and would NEVER work. Tried through the web - said I needed to use google play app - hence a big loop of nothing working. That's when I went to the "stable" version of 7.20 encore. It doesn't appear to want to do anything right.
Any advice on getting this all to work would be greatly appreciated. Using clockwork with the nook 1.4.3 firmware is getting old just to get back to a device that works, albeit not with full android.
dweaton said:
I powered off and then on so it would reboot - it went through the setup screens. I get aborts of android.process.media so it won't let me go through the google play icon. When I try to click on Nookreader for android while on barnes and noble web site, it aborts again. I had the latest daily on here 2 days ago and was getting the same abort, but only twice when android first started. Tapping on google play then said "server error" and would NEVER work. Tried through the web - said I needed to use google play app - hence a big loop of nothing working. That's when I went to the "stable" version of 7.20 encore. It doesn't appear to want to do anything right.
Any advice on getting this all to work would be greatly appreciated. Using clockwork with the nook 1.4.3 firmware is getting old just to get back to a device that works, albeit not with full android.
Click to expand...
Click to collapse
Perform it in two steps... first flash CM7 alone... reboot it... set up wifi... let it settle... THEN flash gapps and set up google stuff.
still stuck - different place
DizzyDen said:
Perform it in two steps... first flash CM7 alone... reboot it... set up wifi... let it settle... THEN flash gapps and set up google stuff.
Click to expand...
Click to collapse
Thanks so much for the help! I really want this to work!
I installed just CM7 and booted up - got one message about the media thing again but only one. I then went to set up wifi and now I'm stuck at that screen - then n button doesn't pop up anything to let me go back to something - like home.
I don't know if it makes any difference - I did the format data/system reset option then the cm7 flash, but it is still remembering my wireless settings somewhere as it automatically connects and it's a wpa2 network. Is there another step for erasing/formatting something that I missed?
Sorry to sound so stupid - but I'm completely a noob (LOVE the video on the registration page!).
Thanks so much again!
Dave:
nope - still not working
Well, installed cm7 and set up wifi, checked it was working by going to the web. Let it sit a few minutes, then reboot with the microSD and installed the gapps. Rebooted, went through google setup, then tried the google play via the icon on the home screen - same thing. It repeats the android.media.application abort message 2 times and then aborts the google play before I even get anywhere.
So......I'm wondering about my google apps zip file -> it said it was google apps for android 2.x.x, whereas I thought the cm7 I installed was android 3. Does this make a diffference?
Thanks again!
Dave :fingers-crossed:
Click here for the correct Gapps file:
http://wiki.cyanogenmod.com/index.php?title=Latest_Version/Google_Apps
still failing
I downloaded the cmod 7.0 file and the gapps (thanks Hoser88!!), created the microSD, booted, did the format data/system reset and installed cmod 7.0. Rebooted, got the same 2 error messages about "android.media.application" aborting, then checked wireless and it was running.
Rebooted with the microSD and installed gapps, removed microSD and rebooted, got the same 2 error messages. Tapped on "Market", it showed a screen with something circling in the middle VERY briefly, then that closed out and the same 2 error messages came up again.
I'm starting to get worried, as I *think* I'm doing what I'm supposed to yet it doesn't work for me. Any and all suggestions are greatly appreciated!
Just to see what happens, I'm going to try the latest nightly cmod7 and see what that does.
Thanks!
Dave
same problems........
I made the microSD with the latest nightly of cmod 7 and the gapps pointed to above. I flashed cmod 7 first, booted, checked wireless, etc.. Still get the same 2 aborts about android.process.media on startup. I then booted again with the microSD and installed the gapps, removed microSD and rebooted. Got the same 2 aborts on startup. Tapped "Market", you see another screen the says "loading" very briefly, then that screen goes away and the android.process.media abort shows and I have to tap force close (this happens twice). I have no idea what this media process is, but is there a way to disable it? I get the feeling it is contributing to my problems.
I'm really lost here. I want this SO bad. I want to have full Android, and have both the Nook and Kindle reader apps so I can keep all my books on 1 device.
Thanks in advance!
dave
Tried more, still fails
I tried a recent suggestion on the cyanogen nook color forum: format data/factory reset and format /system, then install. I did this using the latest nightly and gapps - still got the same abort twice. Found another note in the cyanogen forum saying to go to the rom app and run set permissions and then reboot. I did that - STILL get the aborts. Can't get to google play (shows as "Market") get the quick "Loading" screen followed by immediate close of that and 2 more aborts for adroid.process.media.
I know it remembered my wireless, etc. again. Is there something else I need to format so it completely forgets everything so I'm starting from a clean slate? What can be causing the adroid.process.media abort and how do I get rid of it? Sometimes I think it thinks it is running on a phone, and obviously it's not - do I need to something additional for that as well?
I'm feeling quite confused right now. I've done everything from here and from what I read in the cyanogen nook color forum, but I still can't get this to work. What's the use of running cmod 7 if I can't access the google app store? Please help!
Thank you,
Dave
It works!!
Don't know WHAT I did - I just completely re-downloaded everything - the clockwork image (16gb), the cmod 7.0, and the gapps. Before installing, I went in with the existing install that wasn't working as it should and turned off several apps and cleared their cache when available. I then booted the new microSD - format data/system reset, format /system, installed cmod 7 zip and gapps zip. Removed microSD and rebooted. No more message about android.process.media aborting! It also asked me to set up my Google stuff again, so that was a step in the right direction. I then tried "Market", and IT WORKED!! It still aborts occasionally but I just go right back in and keep going. I did run into something I don't understand - the Nook for Android app page puts a message at the top saying it's not compatible with my device!! Huh? Do I need to may install cmod7.2 stable since this part is working now?
Thanks for the help!! If anyone could help me through the rest of this (get Nook for Android app, getting Kindle for Android app) then I should be good to go from there. I can always download other apps I might want, but I just want to get those 2 working first.
Thanks again!
Dave
It works and I have Kindle and Nook apps!
I updated to 7.20 stable (least wise I hope I did it right - I just flashed from zip but didn't format anything first). After that update I was able to get the B&N Nook reader and the Kindle reader apps! Everything seems to be working fine now - no aborts, nothing!
So.....a BIG THANK YOU to everyone who helped me out!
Thanks SO much!!
Dave :good:
mark as solved?
Some of the other forums I'm on have a set of thread tools - one of which lets you mark the thread as solved. Is there a tool like that on this forum (haven't found it yet if there is) ?
dweaton said:
Some of the other forums I'm on have a set of thread tools - one of which lets you mark the thread as solved. Is there a tool like that on this forum (haven't found it yet if there is) ?
Click to expand...
Click to collapse
Just edit your first post and rename it to [SOLVED] installed cmod7, stuck at "Setup Wizard"
I just made the leap from the latest stock AT&T ROM to the latest Holics ROM. I'm really liking it so far... everything is working really smoothly, with two exceptions. Google+ and Google Keep do not work. Google+ simply will not open and freezes my phone for several seconds. Google Keep opens and immediately closes with the error "Google Play Services are not available". These are the only 2 apps that appear to be affected. I have done the following...
Cleared data from both apps
Uninstalled and re-installed both apps
Cleared data from Google Play Services
Uninstalled and re-installed Google Play Services <--- I don't recommend this step to anyone. It completely screwed all my Google apps.
Factory reset
Re-flashed the ROM - Step-by-step to make sure I did it right
Can anyone point me in the right direction here?
deadsmiley519 said:
I just made the leap from the latest stock AT&T ROM to the latest Holics ROM. I'm really liking it so far... everything is working really smoothly, with two exceptions. Google+ and Google Keep do not work. Google+ simply will not open and freezes my phone for several seconds. Google Keep opens and immediately closes with the error "Google Play Services are not available". These are the only 2 apps that appear to be affected. I have done the following...
Cleared data from both apps
Uninstalled and re-installed both apps
Cleared data from Google Play Services
Uninstalled and re-installed Google Play Services <--- I don't recommend this step to anyone. It completely screwed all my Google apps.
Factory reset
Re-flashed the ROM - Step-by-step to make sure I did it right
Can anyone point me in the right direction here?
Click to expand...
Click to collapse
I have no problem here (not holics rom) Maybe try a different ROM?
Resolved - Sort of...
I discovered that the problem was not present when I would initially flash the ROM. I could install all kinds of apps and make all kinds of tweaks and changes. It wasn't until I powered off the phone AND pulled the battery that the problem would present itself.
Here's the kicker. What I found was if I simply went in and uninstalled the updates from Google Play and then opened Google Play and let it re-install the latest update the problem would go away.
So, while it's not a resolution per se... it is an easy 5 minute work around. The phone works perfectly as long as I don't pull the battery. I've tested this work around 3 times and every time the problem went away.
At least now I won't have to worry about flashing another ROM until the call volume issues with the Jelly Bean ROMs gets resolved.
:good:
same problem, resolution not working
deadsmiley519 said:
I discovered that the problem was not present when I would initially flash the ROM. I could install all kinds of apps and make all kinds of tweaks and changes. It wasn't until I powered off the phone AND pulled the battery that the problem would present itself.
Here's the kicker. What I found was if I simply went in and uninstalled the updates from Google Play and then opened Google Play and let it re-install the latest update the problem would go away.
So, while it's not a resolution per se... it is an easy 5 minute work around. The phone works perfectly as long as I don't pull the battery. I've tested this work around 3 times and every time the problem went away.
At least now I won't have to worry about flashing another ROM until the call volume issues with the Jelly Bean ROMs gets resolved.
:good:
Click to expand...
Click to collapse
I tried your trick, after the 3rd time it work for me. This problem also affects the YouTube and Foursquare apps as far as I can tell.
However the problem returns each time the phone is restarted. Is there any other permanent fixs? Any similar ROM suggestions? (S-ON HTC Vivid)
You've had a bad flash. Wipe all partitions and start fresh. This happened to me before as well. Only way to fix it was to wipe all partitions and reflash
Sent from my HTC PH39100 using Tapatalk 2
deadsmiley519 said:
I just made the leap from the latest stock AT&T ROM to the latest Holics ROM. I'm really liking it so far... everything is working really smoothly, with two exceptions. Google+ and Google Keep do not work. Google+ simply will not open and freezes my phone for several seconds. Google Keep opens and immediately closes with the error "Google Play Services are not available". These are the only 2 apps that appear to be affected. I have done the following...
Cleared data from both apps
Uninstalled and re-installed both apps
Cleared data from Google Play Services
Uninstalled and re-installed Google Play Services <--- I don't recommend this step to anyone. It completely screwed all my Google apps.
Factory reset
Re-flashed the ROM - Step-by-step to make sure I did it right
Can anyone point me in the right direction here?
Click to expand...
Click to collapse
Same here. Been running Banancakes ROM for over a year, and loving every minute of it... But this issue with Google Keep is driving me up the walls. Thanks for your workaround, it saves the day for now, but this is one annoying bug. I don't use YouTube so wouldn't know, but I'll give it a look see to find out if the same applies.
---------- Post added at 02:48 AM ---------- Previous post was at 02:45 AM ----------
Apatche69 said:
You've had a bad flash. Wipe all partitions and start fresh. This happened to me before as well. Only way to fix it was to wipe all partitions and reflash
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
I don't know. I have wiped and flashed quite a few times to try other ROMs and that behaviour is pretty consistent...
zefrenchmen said:
Same here. Been running Banancakes ROM for over a year, and loving every minute of it... But this issue with Google Keep is driving me up the walls. Thanks for your workaround, it saves the day for now, but this is one annoying bug. I don't use YouTube so wouldn't know, but I'll give it a look see to find out if the same applies.
---------- Post added at 02:48 AM ---------- Previous post was at 02:45 AM ----------
I don't know. I have wiped and flashed quite a few times to try other ROMs and that behaviour is pretty consistent...
Click to expand...
Click to collapse
I had this same issue with keep and google plus using codefire desensed Rom on my vivid. I was able to fix it by wiping everything and reflashing the Rom but I also flashed ics gapps right away after. Don't know if that was necessary or not but now I no longer get that play services error. Also my play store app updated automatically to 4.0 right away where before it did not update.
Just a thought, but reflashing fixed my issue.
Sent from my Nexus 10 using Tapatalk 2
glparke said:
I had this same issue with keep and google plus using codefire desensed Rom on my vivid. I was able to fix it by wiping everything and reflashing the Rom but I also flashed ics gapps right away after. Don't know if that was necessary or not but now I no longer get that play services error. Also my play store app updated automatically to 4.0 right away where before it did not update.
Just a thought, but reflashing fixed my issue.
Sent from my Nexus 10 using Tapatalk 2
Click to expand...
Click to collapse
I'll probably give it another try, but I flashed it again recently and did exactly that : full wipe, gapps right away and I have the same issue as OP. I did restore a bunch of stuff via TB, so maybe that's where I screwed up...
I installed CM10 Look Ma No Hands from pengus on my phone with TWRP, the ROM was working fine, all the buttons too. Then flashed non neon google apps from tonyp for Android 4.2.2, and from now, the home button is not responding. In fact, it vibrate when I press it, but Android does'nt go back to home when I do... It has no effect (but the phone is vibrating when pressing it, so it's not dead).
So, I thought that making a full wipe, and flashing CM10 again without the google apps would fix this issue, BUT no at all ! Actually, now, Google Play, Search and Google Talk are installed after a fresh install (even if I did'nt flash them after flashing the ROM, which is normally free of google apps !)
Why are they still here ? (after a full wipe !) Also, my home button still doesn't respond !
I'm confused ! What is going on, and how to get rid of those google apps ? And getting my home button to work again ?
Thanks !
Managed to fix it myself. How : by chance, I had a backup of an ICS rom, so I restored it, then made a full wipe, and installed again CM10. Result : no google apps, home button working again.
Does anyone know what happened, and HOW google apps can still be there after a full wipe ? Where are they stored ?!
Yea we know what happened. U didnt read first few post that explain how to install it correctly. Go and read it to understand what went wrong
Sent from my LG-P990 using xda premium
Hey guys, new here (runs...) however I've already spent about 6 hours on this and not getting anywhere with it.
i9000 UK on orange network
CYM 5.x installed and *did* have busybox 1.21.0 installed (poss part of the problem?)
Was running and ICS rom before the screen change, part of the change included new buttons (my home button binned it) which came with the part already mounted, they appear complete. All the micro connectors are attached and a quick check with a multi meter shows everything physically works with each other, so it must be a kernel issue right?
What I've tried...
reflashing OE rom with ODIN.
flashing a newer ICS rom which has previously been installed and worked fine, no change.
flashed a known good gingerbread rom, now the back button occasionally lights up but doesn't do anything, and a CYM button identify effort doesn't pick up either input either?
Tried installed busybox installer however was a bit tired when doing it and accidentally set the superuser permissions to 'remember forever - deny', and now I've flashed a new rom I can't get to the superuser list no matter where I go, despite formatting it and starting again it somehow remembers the deny for busybox? So as far as I can check the unstable 1.21.0 version of busybox is still installed, but I can't see it, remove it, or replace it? Frustrating much?!
OR, is there just something wrong with the screen/part I have bought, a hardware fault that I can't detect?
Cheers!
Anyone able to shed any light on this?
Cheers
Usually roms don't have any problems with the touchscreen and the capacitive buttons unless they're in REALLY early/alpha stages. I don't see much reason why a kernel would affect it either, considering that there's no usable kernel in here reportted to have touchscreen problems I believe...
So your problem probably lies with the hardware fault. I'm nowhere near capable enough with electrical equipment to know when something is working/should be working or not, but if your rom has everything working, your kernel is fine then the only thing it seems to be is some hardware fault.
With regards to the busybox issue, try a few things:
Under the Apps screen (Manage Apps on Gingerbread, or just Apps in ICS and above), try scroll down until you see Superuser. Clear data/cachee for Superuser and see if that fixes the problem.
Alternatively, busybox is just one of a few superuser apps. Is busybox needed for a specific process? Because if its not specifically needed then I've found that SuperSU works really well also.
Hope this helped!
Sent from my GT-P7510 using Tapatalk HD
Hi all.
I installed cm13 on my mi5 pro yesterday. Looking good so far. I only have minor issues. The first and most important is I can't swap the back and recent button. I've already got used to miui method ( back on the right, recent button on the left).
How can I change them on cm13? Unfortunately closed+gravity can't help me, because after installing them my banking app (Barclay's) thinks that my phone is rooted and closes with an FC. I've also tried the buttons on the screen option, but in this way I lose screen size, though I can change the buttons I believe.
The other small issue is that I don't really like the menu in this alphabetical order system. Can I use something else instead? Like what is in Nova launcher, just a normalenu, nothing else.
Thanks for the help in advance.
Cheers!
the first issue is related to kernel... when cm will be based on the kernel released from xiaomi, the problem will be solved. don't worry, developers are working on it
I found the a method and it is working:
https://www.androidfilehost.com/?fid=457084094631642269
GrooveHero said:
Hi all.
I installed cm13 on my mi5 pro yesterday. Looking good so far. I only have minor issues. The first and most important is I can't swap the back and recent button. I've already got used to miui method ( back on the right, recent button on the left).
How can I change them on cm13? Unfortunately closed+gravity can't help me, because after installing them my banking app (Barclay's) thinks that my phone is rooted and closes with an FC. I've also tried the buttons on the screen option, but in this way I lose screen size, though I can change the buttons I believe.
The other small issue is that I don't really like the menu in this alphabetical order system. Can I use something else instead? Like what is in Nova launcher, just a normalenu, nothing else.
Thanks for the help in advance.
Cheers!
Click to expand...
Click to collapse
For the drawer style you can change that in the launcher's settings. Long press a free spot on your home screen, then press settings and change style to "compact".
This swaps the two capacitive buttons around to xiaomi setup instead of Google
you can also find it on this url: https://store.shade.sh/mi5/ from the unofficial cm13 weekly build thread if you do not wish to download it from myself
Thank you guys its working like a miracle.
Now I have another problem, but this time it looks massive.
So my problem is that cm13 is pre rooted when you install it. Well, I have no problem with it, but unfortunately my banking app ( Barclay's) has. I can't use it, because it says rooted device not supported. I've already checked developer options, and root access is disabled, but this doesn't help, I still have issues with the app. I tried flash SuperSU+binaries from twrp, opened app after flash and use full unroot, same problem, banking app thinks my phone is still rooted. I'm thinking about trying out the slim (aosp based) ROM if I can't find any working method.
Can you guys help me with this?
Thank you one again
GrooveHero said:
Thank you guys its working like a miracle.
Now I have another problem, but this time it looks massive.
So my problem is that cm13 is pre rooted when you install it. Well, I have no problem with it, but unfortunately my banking app ( Barclay's) has. I can't use it, because it says rooted device not supported. I've already checked developer options, and root access is disabled, but this doesn't help, I still have issues with the app. I tried flash SuperSU+binaries from twrp, opened app after flash and use full unroot, same problem, banking app thinks my phone is still rooted. I'm thinking about trying out the slim (aosp based) ROM if I can't find any working method.
Can you guys help me with this?
Thank you one again
Click to expand...
Click to collapse
Root cloak via xposed maybe? Not sure if still supported though!
Harrynowl said:
This swaps the two capacitive buttons around to xiaomi setup instead of Google
you can also find it on this from the unofficial cm13 weekly build thread if you do not wish to download it from myself
Click to expand...
Click to collapse
great! thank you very much!
Harrynowl said:
Root cloak via xposed maybe? Not sure if still supported though!
Click to expand...
Click to collapse
Tried out this method, but as soon as I tried to start banking app, it closed with an fc. Yes I remember now, that was the problem few days back.
Hm...I can't think anything else..
GrooveHero said:
Tried out this method, but as soon as I tried to start banking app, it closed with an fc. Yes I remember now, that was the problem few days back.
Hm...I can't think anything else..
Click to expand...
Click to collapse
I'm unsure, sorry!
GrooveHero said:
Tried out this method, but as soon as I tried to start banking app, it closed with an fc. Yes I remember now, that was the problem few days back.
Hm...I can't think anything else..
Click to expand...
Click to collapse
Try using shade.sh's userbuilds. They are built without built in root. They are under the category "userbuilds" on his website.
Success!
I had to install aosp to to realize what's the problem here. After I did that the same problem happened.: Banking app says my phone is rooted. So I tried doing the same methods on aosp what I did on cm13, except Xposed+gravity because I knew my apps gonna FC. So I tried safe unroot apk from play store, no luck. I also tried this app the night before.
Then i thought maybe I should enable root in developer options, because yesterday morning with this was a half success, Barclays mobile banking app( debit card) said, the device is rooted, I touched ok, then it started without any problems. It was only half success, because the other app Barclaycard (credit card) didn't work, same problem: the phone is rooted. So I tried out the following, and that was the complete success:
Enabled root access for apps only in dev options than i started safe unroot from play->everything's working like a charm.
Thank you guys for help!