Hi all, i've read tons of posts to back to life my friend's runnymede (don't know how did he do to get to this point).
Anyway, it's on indian cid 2.33 rom, can't boot.
Following some threads i managed to install new hboot, getting unlocked s-off and install recovery (all from http://unlimited.io/).
Now my status is:
= JuopunutBear =
RUNNYMEDE PVT SHIP S-OFF
HBOOT-6.28.6666
RADIO-3831.16.00.27_M
eMMC-boot
Apr 24 2012,18:59:39
So archieving this i was able to flash recovery (both, 1.28 or the "ics" one from unlimited.io).
Now the issues are 2:
1) At this point i could be able to install RUU with any CID, but i'm under 30% battery (RUU says) and i can't complete the procedure.
It seems that i can't recharge the phone in any screen (even both recoveryes). How can i charge the phone to up to 30%???
2) None of the recoveryes can mount my sd, i can't see storage at all. I've tried to push vold.stab (or vold.fstab, name issue in the thread i think), via adb, but nothing changed. So i can't flash rom zips.
Please help me fixing at least one of the 2 issues so i can flash a rom and back to life the phone (fix for charge will be very appreciated cause seems safer to install RUU with good battery life than try to flash a .zip with unknow battery %).
Many thanks!!!
russel51 said:
Hi all, i've read tons of posts to back to life my friend's runnymede (don't know how did he do to get to this point).
Anyway, it's on indian cid 2.33 rom, can't boot.
Following some threads i managed to install new hboot, getting unlocked s-off and install recovery (all from http://unlimited.io/).
Now my status is:
= JuopunutBear =
RUNNYMEDE PVT SHIP S-OFF
HBOOT-6.28.6666
RADIO-3831.16.00.27_M
eMMC-boot
Apr 24 2012,18:59:39
So archieving this i was able to flash recovery (both, 1.28 or the "ics" one from unlimited.io).
Now the issues are 2:
1) At this point i could be able to install RUU with any CID, but i'm under 30% battery (RUU says) and i can't complete the procedure.
It seems that i can't recharge the phone in any screen (even both recoveryes). How can i charge the phone to up to 30%???
2) None of the recoveryes can mount my sd, i can't see storage at all. I've tried to push vold.stab (or vold.fstab, name issue in the thread i think), via adb, but nothing changed. So i can't flash rom zips.
Please help me fixing at least one of the 2 issues so i can flash a rom and back to life the phone (fix for charge will be very appreciated cause seems safer to install RUU with good battery life than try to flash a .zip with unknow battery %).
Many thanks!!!
Click to expand...
Click to collapse
Try this method.
On unlimited recovery for 1.28 mounting usb working ok.
You can try wiping the recovery partition from fastboot. "fastboot erase recovery", without a custom recovery, you should be able to charge your device while off.
Sent from my iPhone 4S using Tapatalk
stona175 said:
Try this method.
On unlimited recovery for 1.28 mounting usb working ok.
Click to expand...
Click to collapse
I've done your method. Everything ok, but can't either mount storage to flash from recovery.
Now it's:
*** FARDJAB ***
RUNNYMEDE PVT SHIP S-OFF
HBOOT-1.25.004
RADIO-3831.16.00.27_M
eMMC-BOOT
OCT 20 2011,00:20:33
You say to flash rom from fastboot: how can i do it? I've only .exe ruu for windows (which i can't flash due to low battery or .zip roms for cwm. no .img roms to flash from adb (if it's possible).
AndroHero said:
You can try wiping the recovery partition from fastboot. "fastboot erase recovery", without a custom recovery, you should be able to charge your device while off.
Sent from my iPhone 4S using Tapatalk
Click to expand...
Click to collapse
erasing the recovery gets to hboot at the time that i plug the ac cable. can't mantain it off. power down also reboot to hboot.
You can extract the system .img from your ruu, its inside the rom.zip, just use the command "fastboot flash system system.img". That should atleast let you boot into android and charge.
Sent from my iPhone 4S using Tapatalk
Flash recovery for 1.25 now and you can charge the phone cuz on this hboot charnging and mounting work perfect.
Sent from my HTC One V using xda premium
AndroHero said:
You can extract the system .img from your ruu, its inside the rom.zip, just use the command "fastboot flash system system.img". That should atleast let you boot into android and charge.
Sent from my iPhone 4S using Tapatalk
Click to expand...
Click to collapse
FAILED due to too big size of system.img, picked from original stock indian rom ruu of my model.
modelid: PI3920000
cidnum: HTC__038
mainver: 1.24.720.2
hbootpreupdate:12
system.img size is 1.048.572 KB
Flashed 1.25 recovery. Can't anymore open recovery (1.28 opens well), grey translucent screen after htc logo, but seems to charge when powered off (red led stays on 2 mins by now).
If your hboot is rly 1.25 its can't be. I don't had any problem when i had this phone.
Try recovery from my signature and ofc remember to have unlocked bootloader.
Or make like AndroHero says.
Alternative. Relock bootloader. Its erasing recovery and you can easly charge the phone than.
Related
recently i tried rooting my incredible s, i unlocked the phone with htcdev.com and flashed clockworkmod recovery trough fastboot. then i rooted it with a zip, it worked perfectly. then i decided to install a custom rom so i downloaded cyanogenmod 7, flashed it in clockworkmod and rebooted the phone but its stuck on the default htc splash screen, ive been working for a week trying to get it back to normal, but no luck im pretty angry right now, heres what it says on the bootloader thing:
*** UNLOCKED ***
VIVO PVT SHIP S-ON RL
HBOOT-2.00.0000
RADIO-3822.10.08.28_M
eMMC-boot
Nov 1 2011,20:33:03
need help FAST
Have to tryed this from the faq?
Q: I have unlocked HBOOT 2.00.000 using the procedure at HTCDV.com and have installed a custom recovery and flash custom ROM xxxxxx, but it now hangs at the white HTC screen and won’t boot.
A: With the unlocked HBOOT 2.00.0000 the boot partition is mounted ReadOnly in Recovery mode, thus when you attempt to flash a custom ROM, the boot.img is not correctly updated.
You must manually extract the boot.img from the rom’s zip file and flash it in FASTBOOT USB mode.
1. Since you have an unlocked HBOOT 2.00.0000, then you have installed the Android SDK with adb.exe and fastboot.exe. Open the rom’s zip file and extract and copy the boot.img file to the same directory where adb.exe and fastboot.exe are installed.
2. Boot the phone into HBOOT by holding the Volume Down key and the Power key.
3. On the HBOOT menu select the FASTBOOT option.
4. Connect your phone to the PC.
5. From the PC type:
fastboot devices
6. You should see your device serial number output to the PC screen.
7. From the PC type:
fastboot flash boot boot.img
8. You should see the results of the boot.img being written.
9. From the PC type:
fastboot reboot
10. The phone should then reboot normally.
Click to expand...
Click to collapse
BTW it would be better if you had s-offed with nonverbose's tool, you wouldn't have to void warranty..
Sorry for my english, I'm not 100% sure that all I've written is correct xD
bob8x said:
Have to tryed this from the faq?
BTW it would be better if you had s-offed with nonverbose's tool, you wouldn't have to void warranty..
Sorry for my english, I'm not 100% sure that all I've written is correct xD
Click to expand...
Click to collapse
thank you so much. my english isnt so good either (i am from norway)
Have you got it working?
If not you could try flashing the boot.img. get the boot.img from the cm7 folder then but it in your android folder with your adb stuff. Then flash it from fastboot using commands.
Fastboot flash boot.img
I think that's what you would type? You might want to check.
Sent from my Incredible S using xda premium
ty
vizzy said:
Have you got it working?
If not you could try flashing the boot.img. get the boot.img from the cm7 folder then but it in your android folder with your adb stuff. Then flash it from fastboot using commands.
Fastboot flash boot.img
I think that's what you would type? You might want to check.
Sent from my Incredible S using xda premium[/Q]
i got it working but thanks anyway
Click to expand...
Click to collapse
Incxs said:
i got it working but thanks anyway
Click to expand...
Click to collapse
Tell us what you did then add [SOLVED] to the title please
Incxs said:
recently i tried rooting my incredible s, i unlocked the phone with htcdev.com and flashed clockworkmod recovery trough fastboot. then i rooted it with a zip, it worked perfectly. then i decided to install a custom rom so i downloaded cyanogenmod 7, flashed it in clockworkmod and rebooted the phone but its stuck on the default htc splash screen, ive been working for a week trying to get it back to normal, but no luck im pretty angry right now, heres what it says on the bootloader thing:
*** UNLOCKED ***
VIVO PVT SHIP S-ON RL
HBOOT-2.00.0000
RADIO-3822.10.08.28_M
eMMC-boot
Nov 1 2011,20:33:03
need help FAST
Click to expand...
Click to collapse
****ty isn't it. I'm also in trouble with my HTC incredible S, not so incredible anymore I guess. Hope to find aid very soon...
bob8x said:
Have to tryed this from the faq?
BTW it would be better if you had s-offed with nonverbose's tool, you wouldn't have to void warranty..
Sorry for my english, I'm not 100% sure that all I've written is correct xD
Click to expand...
Click to collapse
[email protected] said:
****ty isn't it. I'm also in trouble with my HTC incredible S, not so incredible anymore I guess. Hope to find aid very soon...
Click to expand...
Click to collapse
The answer is in the second post of this thread!
Hi,
I think I've done something wrong with updating my phone:
At first I had Android Revolutiom Rom 2.x installed and I wanted to make an update. I didn't realize that I didn't have S-OFF and I made a SuperWipe. Installing the new ARHD 4.0 obviously didn't work, because I only had S-ON. So the phone stucked during booting on the green HTC logo on white background.
I tried other Roms but it didn't come to a happy end
So, what can I do now? Can I install the older version of ARHD 2.x (which I don't have anymore)?
This is what I can see when I turn on the phone with power and volume-up:
***UNLOCKED***
VIVO PVT SHIP S-ON RL
HBOOT-2.00.0000
RADIO-3822.10.08.28_M
eMMC-boot
Nov 1 2011, 20:33:03
I can go into Recovery and have installed Revolutinoary CWM 4.0.1.4
I don't know which PG321IMG.zip is flashed or if it is the right one either.
Hope someone can help me :fingers-crossed:
bender5 said:
Hi,
I think I've done something wrong with updating my phone:
At first I had Android Revolutiom Rom 2.x installed and I wanted to make an update. I didn't realize that I didn't have S-OFF and I made a SuperWipe. Installing the new ARHD 4.0 obviously didn't work, because I only had S-ON. So the phone stucked during booting on the green HTC logo on white background.
I tried other Roms but it didn't come to a happy end
So, what can I do now? Can I install the older version of ARHD 2.x (which I don't have anymore)?
This is what I can see when I turn on the phone with power and volume-up:
***UNLOCKED***
VIVO PVT SHIP S-ON RL
HBOOT-2.00.0000
RADIO-3822.10.08.28_M
eMMC-boot
Nov 1 2011, 20:33:03
I can go into Recovery and have installed Revolutinoary CWM 4.0.1.4
I don't know which PG321IMG.zip is flashed or if it is the right one either.
Hope someone can help me :fingers-crossed:
Click to expand...
Click to collapse
Since you have an unlocked bootloader, you simply need to open up the ARHD 4.0 zip file and extract the boot.img file and then manually flash it in FASTBOOT USB mode using the command:
fastboot flash boot boot.img
There are plenty of posts on how to do this.
tpbklake said:
Since you have an unlocked bootloader, you simply need to open up the ARHD 4.0 zip file and extract the boot.img file and then manually flash it in FASTBOOT USB mode using the command:
fastboot flash boot boot.img
There are plenty of posts on how to do this.
Click to expand...
Click to collapse
So I flash again the SuperWipe script and put the ARHD 4.0 zip file back on SD and flash it through CWM? After that I flash manually the boot.img?
bender5 said:
So I flash again the SuperWipe script and put the ARHD 4.0 zip file back on SD and flash it through CWM? After that I flash manually the boot.img?
Click to expand...
Click to collapse
Yep that will get you going.
tpbklake said:
Yep that will get you going.
Click to expand...
Click to collapse
That worked, I'm glad it was that easy. Sorry for disturbing you with this little problem, but THANKS A LOT :victory:
Hey guys I badly need help!!! I was able to convert my HTC One GSM to Google Edition just last week, but today I want to restore it to its factory ROM so I can also restore the warranty. Now the problem became visible when I tried to flash a stock ROM (not the GPE ROM). Listed below are the problems I am facing at the moment:
1. Stuck in FASTBOOT USB, and cannot boot to ROM.
2. Can't boot to recovery. Everytime I highlight and select recovery the phone just shows up the "Google" logo, then vibrates, then back fastboot USB.
3. Factory Reset not working, again shows up "Google" then restarts to fastboot usb mode.
4. I ran cmd in sdk-tools, typed in "fastboot devices", and my phone is detected. But when I type "adb devices", my phone is not listed.
5. I tried flashing CWM or TWRP through fastboot in cmd but the reply is"remote: signature verify fail", as wellas flashing a RUU for my device.
6. On bootloader is written:
*** TAMPERED ***
*** RELOCKED ***
M7_UK PVT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-4A.17.3250.14
OpenDSP-v30.120.3274.0520
OS-2.14.1700.15
eMMC-boot 2048MB
Guys I really badly need help to fix my phone. I don't wanna spend for repairs or throw it in the garbage. I am very sure there's a way to fix this and get it to work, but I am rookie in android as I've been an iOs user for a couple of years.
ClydeWinux said:
Hey guys I badly need help!!! I was able to convert my HTC One GSM to Google Edition just last week, but today I want to restore it to its factory ROM so I can also restore the warranty. Now the problem became visible when I tried to flash a stock ROM (not the GPE ROM). Listed below are the problems I am facing at the moment:
1. Stuck in FASTBOOT USB, and cannot boot to ROM.
2. Can't boot to recovery. Everytime I highlight and select recovery the phone just shows up the "Google" logo, then vibrates, then back fastboot USB.
3. Factory Reset not working, again shows up "Google" then restarts to fastboot usb mode.
4. I ran cmd in sdk-tools, typed in "fastboot devices", and my phone is detected. But when I type "adb devices", my phone is not listed.
5. I tried flashing CWM or TWRP through fastboot in cmd but the reply is"remote: signature verify fail", as wellas flashing a RUU for my device.
6. On bootloader is written:
*** TAMPERED ***
*** RELOCKED ***
M7_UK PVT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-4A.17.33250.14
OpenDSP-v30.120.3274.0520
OS-2.14.1700.15
eMMC-boot 2048MB
Guys I really badly need help to fix my phone. I don't wanna spend for repairs or throw it in the garbage. I am very sure there's a way to fix this and get it to work, but I am rookie in android as I've been an iOs user for a couple of years.
Click to expand...
Click to collapse
try flashing the appropriate firmware files for an particular RUU before flashing RUU n check?
Harish_Kumar said:
try flashing the appropriate firmware files for an particular RUU before flashing RUU n check?
Click to expand...
Click to collapse
Yes I have tried flashing the appropriate RUU file but in CMD it returns "remote: signature verify fail"
ClydeWinux said:
Yes I have tried flashing the appropriate RUU file but in CMD it returns "remote: signature verify fail"
Click to expand...
Click to collapse
not RUU...i am talking about firmware files
for instance if you are about to flash an 4.3 sense 3.22 rom..flash its firmware in RUU mode before flashing the actual RUU
Harish_Kumar said:
not RUU...i am talking about firmware files
for instance if you are about to flash an 4.3 sense 3.22 rom..flash its firmware in RUU mode before flashing the actual RUU
Click to expand...
Click to collapse
Oh my, are the firmware files included inside the RUU.zip? or should I download the firmware files separately? @Harish_Kumar
ClydeWinux said:
Oh my, are the firmware files included inside the RUU.zip? or should I download the firmware files separately? @Harish_Kumar
Click to expand...
Click to collapse
RUU Zip will be encrypted..you cant extract files from it
you have to download firmware files seperately...you can find them in android development section
check here -> http://forum.xda-developers.com/showthread.php?t=2182823
I almost forgot... you should be S-off in order to flash the firmware
and even RUU Flashing requires S-off
Harish_Kumar said:
RUU Zip will be encrypted..you cant extract files from it
you have to download firmware files seperately...you can find them in android development section
check here -> http://forum.xda-developers.com/showthread.php?t=2182823
I almost forgot... you should be S-off in order to flash the firmware
and even RUU Flashing requires S-off
Click to expand...
Click to collapse
Ok I have flashed the firmware for my phone and now it's on 3.58.1700.5. Should I download a RUU.zip version 3.58.1700.5 and flash it on my phone? because until now I can't flash CWM or TWRP. @Harish_Kumar
ClydeWinux said:
Ok I have flashed the firmware for my phone and now it's on 3.58.1700.5. Should I download a RUU.zip version 3.58.1700.5 and flash it on my phone? because until now I can't flash CWM or TWRP. @Harish_Kumar
Click to expand...
Click to collapse
arent you able to flash custom recovery like CWM or TWRP even after flashing firmware files? if everything's right you should be able to
56562336461
Harish_Kumar said:
arent you able to flash custom recovery like CWM or TWRP even after flashing firmware files? if everything's right you should be able to
Click to expand...
Click to collapse
Everytime I tried to flash custom recovery (CWM/TWRP) in cmd it returns "remote: signature verify fail", I used command "fastboot flash recovery cwm.img". And now I tried to load up recovery from menu, and it's stuck on a 'dead-android-icon-with-exclamation-error' logo. @Harish_Kumar
Bootloader unlocked
m7_UL PVT SHIP S-ON RH
hboot-1.55.0000
radio-4a.21.3263.04
opendsp-v32.120.247.0909
0s: 3.62.401.1
emmc-boot 2048mb
oct 17 2013 h6 23.6.14
Problem is that phone is stuck @ HTC logo
Before that phone was rooted and twrp recovery installed.
Customer do something from recovery (that he unable to describe), then phone stuck @ HTC logo.
I am trying to install RUU.exe but not find any RUU that match with 0s: 3.62.401.1 and radio and CID : Htc__j15.
Then I am trying to s-off for flashing different firmware by supercid, but I failed to s-off because phone is stuck @HTC and don't found as adb
so rumrunner_HTC_0.5.0 tool unable to recognized it.
Now unable to downgrade hboot to 1.44 and s-off the device and find any compatible ruu.exe
I tried factory reset both from Bootloader and recovery but no luck.
Now phone is Stuck @ HTC logo . If I select Boot-loader (Hboot) Nothing found in device manger,
CWM Recovery accessible, only fastboot and oem ruu mode assessable (fastboot oem rebootRUU) and by this it is recognized by ruu.exe
what to do? any method to s-off in this situation or any suggestion?
Thanks.
mmrozibul said:
Bootloader unlocked
m7_UL PVT SHIP S-ON RH
hboot-1.55.0000
radio-4a.21.3263.04
opendsp-v32.120.247.0909
0s: 3.62.401.1
emmc-boot 2048mb
oct 17 2013 h6 23.6.14
Problem is that phone is stuck @ HTC logo
Before that phone was rooted and twrp recovery installed.
Customer do something from recovery (that he unable to describe), then phone stuck @ HTC logo.
I am trying to install RUU.exe but not find any RUU that match with 0s: 3.62.401.1 and radio and CID : Htc__j15.
Then I am trying to s-off for flashing different firmware by supercid, but I failed to s-off because phone is stuck @HTC and don't found as adb
so rumrunner_HTC_0.5.0 tool unable to recognized it.
Now unable to downgrade hboot to 1.44 and s-off the device and find any compatible ruu.exe
I tried factory reset both from Bootloader and recovery but no luck.
Now phone is Stuck @ HTC logo . If I select Boot-loader (Hboot) Nothing found in device manger,
CWM Recovery accessible, only fastboot and oem ruu mode assessable (fastboot oem rebootRUU) and by this it is recognized by ruu.exe
what to do? any method to s-off in this situation or any suggestion?
Thanks.
Click to expand...
Click to collapse
1) Flash the Guru Reset ROM in CWM . Download from this link:
http://www.htc1guru.com/2013/10/guru-reset-3-62-401-1-stock-rom/
Follow the instructions on this page to understand how to put a ROM zip on ur phone through ADB:
http://forum.xda-developers.com/showthread.php?t=2317986
Remember, u have 2 push the Guru Reset ROM zip to the phone
2) Flash the zip file in CWM
3) DONT SELECT ROOT. SELECT STOCK RECOVERY
4) Continue the procedure
5) Profit
Basically, no need for S-OFF and HBOOT 1.44
raghav kapur said:
1) Flash the Guru Reset ROM in CWM . Download from this link:
http://www.htc1guru.com/2013/10/guru-reset-3-62-401-1-stock-rom/
Follow the instructions on this page to understand how to put a ROM zip on ur phone through ADB:
http://forum.xda-developers.com/showthread.php?t=2317986
Remember, u have 2 push the Guru Reset ROM zip to the phone
2) Flash the zip file in CWM
3) DONT SELECT ROOT. SELECT STOCK RECOVERY
4) Continue the procedure
5) Profit
Basically, no need for S-OFF and HBOOT 1.44
Click to expand...
Click to collapse
I have that rom already, I will try post result..
Thanks a lot..
mmrozibul said:
I have that rom already, I will try post result..
Thanks a lot..
Click to expand...
Click to collapse
Pls hit the thanks button if u think I helped u
raghav kapur said:
Pls hit the thanks button if u think I helped u
Click to expand...
Click to collapse
Problem solved by Adb sideload method.
Phone is alive now
this si my first time writing on this forum.ive been stuck with no OS on my One,hboot 1.55,os-3.62.401.1(4.3),unlocked bootloader,with TWRP,with superuser acces.I acidentali delete my whole os and data/system/nternal... in TWRP.TWRP coudnt mount data/system/dalwik cache/internal storage-nothing.i get bootloop.then i get problem with superuser- in TWRp.Tryed to push or sideload many roms and zips,but adb coudnt recognize my device in the way it should.so,with no os and nothing on my internal storage,and getting problem with superuser in TWRP,i tried to run ruu.zip.it start but stuck cuz i was unlocked bootloader and not s-off.so i go from the bigining.I tried to sideload too,but i failed!!!this is what i done---Relock bootloader.Unlock bootloader.Flash latest CWM recovery.Thru cwm i flash cm 10.1.It boots!!then flash susuperuser.zip to gain root.with root checker i chech if i manage root.if not,use another superuser.zip...then i flash ARHD 11 to try s-off(fail).then i flash ARHD 52.0,again check my root.then i run firewater and get S-off.I see many people stuck with no os and with adb problems,or cant get s-off to retun to stock or run the device which is in bootloop.this is how i manage to un-softbrick my One,and to get S-off
Sory for my english,and sory if the thread is wrong.I just want to help if someone got stuck in bootloop/with no os/with no S-off to run ruu.zip or any rom.
( Im not responsible if you brick your device,this is just sugestion and way how i did it)
Situation: No OS, S-ON, No Recovery - TWRP. HTC One Rogers Firmware. Trying to get any os on it at this point
Tried to fastboot flash zip firmware.zip
Says successful on prompt but freezes with 4/5 bar on the HTC one silver screen
Any ideas?
Not sure what the problem is. If you have no recovery then fastboot flash a recovery and then adb push or sideload a Rom to your phone
Sent from my GT-I9305 using xda app-developers app
bellato said:
Situation: No OS, S-ON, No Recovery - TWRP. HTC One Rogers Firmware. Trying to get any os on it at this point
Tried to fastboot flash zip firmware.zip
Says successful on prompt but freezes with 4/5 bar on the HTC one silver screen
Any ideas?
Click to expand...
Click to collapse
If you are truly a Rogers branded device, here is the kitkat ruu to flash. Will be totally stock with newest bootloader (will not be able to s-off), can still unlock bootloader and flash twrp 2.6.3.3 or 2.6.3.4
http://www.htc1guru.com/dld/ruu_m7_..._10-38r-1157-04l_release_351317_signed_2-exe/
Tried them both gives me a image error or signature failure so i don't believe these are the correct RUU's my current image verison is 1.29.631.17
I tried Flash_recovery_4.19.401.11. and Previously when i had recovery and tried to sideload it gave me a system error and just kept loading.
INFO on bootloader screen (if it matters)
-------------------------------------------
M7_UL PVT SHIP S-ON RH
HBOOT-1.44.0000
Radio-4a.14.3250.13
bellato said:
Tried them both gives me a image error or signature failure so i don't believe these are the correct RUU's my current image verison is 1.29.631.17
I tried Flash_recovery_4.19.401.11. and Previously when i had recovery and tried to sideload it gave me a system error and just kept loading.
INFO on bootloader screen (if it matters)
-------------------------------------------
M7_UL PVT SHIP S-ON RH
HBOOT-1.44.0000
Radio-4a.14.3250.13
Click to expand...
Click to collapse
? Did you try and flash the ruu or run it from windows?
Here is a 4.3 nandroid for twrp you can sdeload and try
http://www.htc1guru.com/dld/m7-twrp-nandroid-backup-cid-roger001-3-22-631-1-zip/
SOLVED
Hey thanks a lot for helping me. I have been able to solved it myself.
If someone would like to know what i did:
(for any noobs like me - UNLOCK the phone first to install a recovery)
It didn't properly wipe/format in twrp 2.6.3.3 because of decrypt pw, had to upgrade to 2.7 wipe it then go back to 2.6.3.3 then type adb usb
while mounted with data selected only. adb sideload button did not work.
Installed Android Revolution 62 directly and works fine now!
Thanks a lot for your help though!
http://forum.xda-developers.com/showthread.php?t=2272731 (adb usb intructions)